9.3 List of messages
This section lists the messages output by JP1/AJS3 - Print Option that have message IDs.
-
KAVR0001-E
The unexpected error occurred. Detailed information: (detailed information)
An unexpected error occurred during processing.
- (S)
-
Aborts processing.
- (O)
-
Collect information and contact the system administrator.
-
KAVR0002-E
Memory is insufficient.
Processing was canceled. Possible causes are:
-
If memory usage reaches the OS's upper limit (2 GB) for a single process, the process fails in the insufficient memory error (KAVR0002-E) even when the machine capacity allows more.
-
The job operation information file has garbled data.
-
The job operation information file has inconsistent data.
- (S)
-
Aborts processing.
- (O)
-
-
Close unnecessary programs and try again.
-
Make sure that sufficient disk space is available by deleting unnecessary files.
-
Divide the job operation information file into smaller parts through (1), (2), or both below to continue operation.
(1) In order to make the number of target units smaller, choose a unit name from the lower level and specify it in the Collecting Job Operation Information window or for the jprcollect command.
(2) In order to make the volume of collecting schedule information smaller, specify a shorter collection period in the Collecting Job Operation Information window or for the jprcollect command.
-
Make sure that the value of the LANG in the file (automatic startup shell script) or the value of the LANG on the environment where jprcollect command is executed uses as same value as JP1/AJS3.
-
If you add new a unit or change a unit name on JP1/AJS during collecting the job operation information, collect the job operation information again.
-
-
-
KAVR0003-E
An attempt to create a folder has failed.
folder-name (Err: error-code)
An attempt to create a folder has failed. Possible causes are:
-
The name of the folder contains an illegal character
-
You do not have permission to create a folder
- (S)
-
Aborts processing.
- (O)
-
Check the following, and then try again:
- When the error code is 123 (ERROR_INVALID_NAME) or 267 (ERROR_DIRECTORY):
-
-
Whether the folder name contains any of the following illegal characters:
\ / ; * ? " < > | : ,
-
Whether the name begins or ends with a period (.)
-
Whether the name contains one of the following reserved words, or begins with one of them, followed by a period (.), regardless of whether it is in uppercase or lowercase:
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9, LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9
-
Whether the name begins with AJS, regardless of whether it is in uppercase or lowercase
-
Whether the name begins with HLICLIB, regardless of whether it is in uppercase or lowercase
-
- When the error code is 5 (ERROR_ACCESS_DENIED):
-
Whether you have permission to create a folder
-
-
KAVR0004-E
An attempt to write a file has failed.
file-name (Err: error-code)
An attempt to write to a file has failed. Possible causes are:
-
The name of the file contains an illegal character
-
You do not have permission to write to a file
- (S)
-
Aborts processing.
- (O)
-
Check the following, and then try again:
- When the error code is 123 (ERROR_INVALID_NAME) or 2 (ERROR_FILE_NOT_FOUND):
-
-
Whether the file name contains any of the following illegal characters:
\ / ; * ? " < > | : ,
-
Whether the name begins or ends with a period (.)
-
Whether the name contains one of the following reserved words, or begins with one of them, followed by a period (.), regardless of whether it is in uppercase or lowercase:
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9, LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9
-
Whether the name begins with AJS, regardless of whether it is in uppercase or lowercase
-
Whether the name begins with HLICLIB, regardless of whether it is in uppercase or lowercase
-
- When the error code is 5 (ERROR_ACCESS_DENIED):
-
Whether you have permission to create a file
-
-
KAVR0100-E
Specified value of the argument is invalid. argument:argument
An invalid value is specified for a command argument.
- (S)
-
Aborts processing.
- (O)
-
Specify the value correctly, and try again.
-
KAVR0101-E
Specification of the argument is duplicated. argument:argument
The same command argument is specified more than once.
- (S)
-
Aborts processing.
- (O)
-
Specify the command arguments correctly, and try again.
-
KAVR0102-E
Specification of the argument is insufficient. argument:argument
A mandatory argument was omitted.
- (S)
-
Aborts processing.
- (O)
-
Specify the command arguments correctly, and try again.
-
KAVR0103-E
Invalid argument is specified. argument:argument
An invalid command argument is specified.
- (S)
-
Aborts processing.
- (O)
-
Specify the command arguments correctly, and try again.
-
KAVR0104-E
Cannot specify these options together.
Conflicting options are specified in the command arguments.
- (S)
-
Aborts processing.
- (O)
-
Specify the command arguments correctly, and try again.
-
KAVR0150-I
Job operation information was collected.
The collection of job operation information ended normally.
-
KAVR1000-E
Job operation information could not be collected.
An attempt to collect job operation information has failed. The probable causes are as follows:
-
The specified unit does not exist
-
The JP1/AJS scheduler service is not running
-
The output file cannot be created
-
The JP1/AJS3 environment setting parameter ADMACLIMIT is set to yes.
- (S)
-
Aborts processing.
- (O)
-
-
Specify a unit that exists.
-
Start the JP1/AJS scheduler service.
-
Check the write permission for the specified output target.
-
Log in to the OS, create a JP1 user with the same name as the user account that executes the jprcollect command or executes job operation information collection from the Start menu, and then set the JP1 permission level for the JP1 resource group of the target units for the ajsprint command and the ajsshow command.
Identify and address the cause of the error by referring to the execution logs, and then try again. Execution log information is recorded in the file output-file-name.log.
-
-
-
KAVR1001-W
Only definition information was collected. Execution schedule/result information could not be collected.
JP1/AJS3- Print Option was able to collect definition information, but could not collect execution schedules and results. Possible causes are:
-
The specified unit has not been registered for execution
-
There are no execution schedules or results in the specified collection period
-
You specified a job group in which one or more of the constituent units has not been registered for execution
In this case, JP1/AJS3 - Print Option collects execution schedules and results for the units that have been registered for execution.
- (S)
-
Continues processing.
- (O)
-
You can output documents that contain definition information.
If you need the document to contain execution schedules and results, identify and address the cause of the error by referring to the execution logs, and then try again. Execution log information is recorded in the file output-file-name.log.
-
-
KAVR1010-E
Cannot to specify the generic name for unit name.
You cannot use wildcards (* and ?) when specifying unit names.
- (S)
-
Aborts processing.
- (O)
-
Specify the command arguments correctly, and try again.
-
KAVR1011-E
Unit name cannot be omitted.
You must specify a unit name.
- (S)
-
Aborts processing.
- (O)
-
Specify the command arguments correctly, and try again.
-
KAVR1012-E
Output file name cannot be omitted.
You must specify an output file name.
- (S)
-
Aborts processing.
- (O)
-
Specify the command arguments correctly, and try again.
-
KAVR1013-E
The specified output file name is invalid.
The output file name is specified incorrectly. Possible causes are:
-
The directory you specified does not exist
-
The directory name or file name contains an illegal character
-
The system cannot create the specified file
- (S)
-
Aborts processing.
- (O)
-
Specify the command arguments correctly, and try again.
-
-
KAVR1014-E
Specify -b argument and -e argument with the pair.
The -b argument and the -e argument must be specified together.
- (S)
-
Aborts processing.
- (O)
-
Specify the command arguments correctly, and try again.
-
KAVR1015-E
The specified start month is invalid.
The start month is specified incorrectly. The cause is as follows:
-
The specified value is outside the range of 1 to 12
- (S)
-
Aborts processing.
- (O)
-
Specify the correct value, and try again.
-
-
KAVR1016-E
The specified number of months is invalid.
The number of months is specified incorrectly. The cause is as follows:
-
The specified value is outside the range of 1 to 12
- (S)
-
Aborts processing.
- (O)
-
Specify the correct value, and try again.
-
-
KAVR1020-E
Prerequisite program is not installed.
A prerequisite program (JP1/AJS) is not installed.
- (S)
-
Aborts processing.
- (O)
-
Install the prerequisite program.
-
KAVR2000-E
An error occurred during a file read.
file-name (Err: error-code)
An attempt to read a file has failed. Possible causes are:
-
The path does not exist
-
The file does not exist
-
You do not have permission to access the file
- (S)
-
Aborts processing.
- (O)
-
Check the following, and then try again:
-
Make sure that the path exists.
-
Make sure that the file exists.
-
Make sure that you have access permission for the file.
If the problem is not solved, check whether something else is wrong with the file.
-
-
-
KAVR2001-E
This file data is corrupted.
The specified job operation information file, format definition file, or jobnet flow format definition file is corrupted.
- (S)
-
Aborts processing.
- (O)
-
Re-create the job operation information file, and try again.
-
KAVR2002-I
Processing was stop.
The process of inputting a job operation information file was canceled by the operator.
- (S)
-
Continues processing.
-
KAVR2003-E
An error occurred during a file write.
file-name (Err: error-code)
An attempt to write to a file has failed.
- (S)
-
Aborts processing.
- (O)
-
Make sure that the file is available, and try again.
-
KAVR2004-E
The specified file name contains invalid characters (e.g., \, /, :, *, ?, ", <, >, |).
The file name contains one or more illegal characters (\ / : * ? " < > |).
- (S)
-
Aborts processing.
- (O)
-
Specify the file name correctly, and try again.
-
KAVR2005-E
The file name is too long. Specify a file name that has 63 or shorter bytes.
A file name is specified that contains more than 63 bytes.
- (S)
-
Aborts processing.
- (O)
-
Specify a file name containing 63 or fewer bytes, and try again.
-
KAVR2006-W
An unsupported unit type is contained in the job operation information file.
The job operation information file contains a unit type that is not supported by the current version of JP1/AJS3 - Print Option.
- (S)
-
Continues processing.
- (O)
-
Check which unit types are unsupported.
Symbols are displayed for unsupported unit types even if Description is specified as the display format for the column item in the format definition.
-
KAVR2007-E
The displayed file has been modified.
The displayed file has been modified.
- (S)
-
Aborts processing.
- (O)
-
Display the file again.
-
KAVR2010-Q
The displayed file will be closed. Do you want to continue?
This message asks the user to confirm closing of the current document.
- (S)
-
Waits for a response.
- (O)
-
Specify Yes to close the file.
To leave the file open, specify No.
-
KAVR2011-E
The number of units in the job operation information file exceeded maximum number of units (maximum-number-of-units).
The number of units exceeded the maximum number that can be output to the document.
- (S)
-
Aborts processing.
- (O)
-
Re-create the job operation information file so that the number of units does not exceed the maximum, and then try again. If you need to increase the maximum number of units, you can do so in the Environment Settings window.
-
KAVR2012-I
You can use neither daily nor monthly format definition when execution schedule/result information is not contained in the job operation information file.
You cannot output a document in monthly or daily format because the input file does not contain information about execution schedules and results.
- The causes are as follows:
-
-
The job operation information file (.aoi file) does not contain schedule information (set in JP1/AJS) for a jobnet, or the jobnet whose schedule information it contains has not been registered for execution.
-
A collection period for schedule information was not specified in a parameter of the command that collected the job operation information, or there was no schedule information in the specified collection period.
-
- (S)
-
The document area becomes unavailable, and processing continues.
- (O)
-
Create a document in list format.
-
KAVR2013-E
The file path name is too long. Specify a file path name that has 258 or shorter bytes.
You cannot use the specified path and file name because they contain more than 258 bytes in total.
- (S)
-
Aborts processing.
- (O)
-
Specify a path and file name that contain 258 or fewer bytes, and try again.
-
KAVR2014-E
The folder path name is too long. Specify a folder path name that has 194 or shorter bytes.
You cannot use the specified path because it contains more than 194 bytes.
- (S)
-
Aborts processing.
- (O)
-
Specify a path that contains 194 or fewer bytes, and try again.
-
KAVR2015-E
The XXX is too long. Specify XXX that has YYY or shorter bytes.
You cannot use the specified XXX because it exceeds YYY bytes.
- (S)
-
Aborts processing.
- (O)
-
XXX is truncated so that only the first YYY bytes are displayed. Characters that cannot be converted to ASCII encoding are replaced with question marks (?). Specify XXX using YYY bytes or fewer, and try again.
-
KAVR2016-W
The monthly or daily document is not output in 48 hours, because the execution date information for the jobnet does not exist.
The jobnet execution schedule information did not exist, so the monthly or daily document was output in 24 hours. The possible causes are as follows:
-
The job operation information file that contains the information collected by JP1/AJS2 - Print Option Manager License 07-10 or earlier was used.
-
The job operation information file did not contain the definition and execution schedule information of an upper-level jobnet of the output target job.
-
After the Monthly and daily display hours setting in the Environment Settings window was changed from 24 hours to 48 hours, the document display was not refreshed.
- (S)
-
Continues processing.
- (O)
-
To output a monthly or daily document in 48 hours, try again by using the job operation information file as follows:
-
Use a job operation information file that contains the information collected by JP1/AJS2 - Print Option Manager License 07-50 or later, or by JP1/AJS3 Print Option Manager.
-
Collect the job operation information in such a way that information of an upper-level jobnet of the output target job is contained.
If you change the Monthly and daily display hours setting in the Environment Settings window, refresh the document display.
To stop displaying this message, in the View Settings tab of the Environment Settings window, set 24 hours for Monthly and daily display hours.
-
-
-
KAVR2020-I
The below file was output.
file-name
A CSV file was successfully created.
- (S)
-
Continues processing.
-
KAVR2030-W
You cannot use the default printer.
No default printer is set.
- (S)
-
Aborts processing.
- (O)
-
Set a default printer and try again.
-
KAVR2050-W
The size of item in the output data exceeded the limit.
- The size of all data in a cell exceeded 32,000 bytes.
- The size of a data in a cell exceeded 4,095 bytes.
- The number of lines in a cell exceeded 2,000.
An item in the output data has exceeded one of the restrictions below. The messages in italics are output in a message dialog only when that particular condition is met.
-
The total data in a cell exceeds 32,000 bytes
-
The characters in one piece of data in a cell exceeds 4,095 bytes
-
The number of lines in a cell exceeds 2,000
- (S)
-
Continues processing.
- (O)
-
View the log file (JP1/AJS3-Print-Option-installation-folder\Log\ajs2po.log) and review the value in the cell that exceeded the limit.
-
-
KAVR2101-Q
If you change the basic format, the settings items will be initialized. Do you want to continue?
This message asks the user to confirm the change to the basic format.
- (S)
-
Waits for a response.
- (O)
-
Specify Yes to change the basic format.
To leave the basic format unchanged, specify No.
-
KAVR2102-Q
The settings items will be initialized. Do you want to continue?
This message asks the user to confirm initialization of the defined settings.
- (S)
-
Waits for a response.
- (O)
-
Specify Yes to initialize the settings.
To leave the settings unchanged, specify No.
-
KAVR2103-E
Add the column items to the format definition.
An attempt was made to register an empty format definition file.
- (S)
-
Aborts processing.
- (O)
-
Define one or more column items in the format definition and try again.
-
KAVR2105-Q
Do you want to terminate the format definition settings?
This message requests confirmation from the user when canceling the process of setting a format definition.
- (S)
-
Waits for a response.
- (O)
-
Specify Yes to stop setting the format definition.
To continue setting the format definition, specify No.
-
KAVR2106-E
Enter the value in the range 0-23 in the hour field of the base time.
The hour part of the base time is specified incorrectly.
- (S)
-
Cancels processing.
- (O)
-
Enter a value from 0 to 23 as the hour of the base time.
-
KAVR2107-E
Enter the value in the range 0-59 in the minute field of the base time.
The minute part of the base time is specified incorrectly.
- (S)
-
Cancels processing.
- (O)
-
Enter a value from 0 to 59 as the minute of the base time.
-
KAVR2108-W
The current version does not support a unit type in the format definition file.
The format definition file contains a column item that is not supported by the current version of JP1/AJS3 - Print Option.
- (S)
-
Continues processing.
- (O)
-
Check the unsupported column item.
Although this error does not prevent you from using the format definition file, delete the column item if it is not needed. If you output the document with the column item still in place, hyphens (-) appear as the data for that column.
-
KAVR2109-E
Enter the value in the range 10-80 in the column width field.
A column width is specified incorrectly.
- (S)
-
Aborts processing.
- (O)
-
Enter a value from 10 to 80 as the column width.
-
KAVR2110-E
Enter the value in the range 0-99 in the margin field.
A margin is set incorrectly.
- (S)
-
Aborts processing.
- (O)
-
Enter a value from 0 to 99 as the margin.
-
KAVR2111-E
Enter the value in the range 32000-150000 in the maximum number of units field.
The maximum number of units is specified incorrectly.
- (S)
-
Aborts processing.
- (O)
-
Enter a value from 32,000 to 150,000 as the maximum number of units.
-
KAVR2112-E
Enter the value in the XXX in the range YYY-ZZZ.
The value for XXX is specified incorrectly.
- (S)
-
Aborts processing.
- (O)
-
Re-input a value for XXX in the range YYY-ZZZ.
-
KAVR2201-E
The specified page range is invalid.
The page range is specified incorrectly.
- (S)
-
Aborts processing.
- (O)
-
Enter a correct value for the page range.
-
KAVR2251-E
The map output failed. (An attempt to create the work file has failed.)
Map output failed because a work file could not be created.
- (S)
-
Aborts processing.
- (O)
-
Check the access permissions for the %allusersprofile%#\Hitachi\JP1\JP1_DEFAULT\JP1AJS2PO folder.
- #
-
By default, %allusersprofile% represents system-drive:\ProgramData.
-
KAVR2252-E
The map output failed. (An attempt to start Excel has failed.)
Map output failed because Microsoft Excel could not be started.
- (S)
-
Aborts processing.
- (O)
-
Make sure that Microsoft Excel is able to start in your environment.
-
KAVR2253-E
The map PDF output failed. (An attempt to create the work file has failed.)
Map PDF output failed because a work file could not be created.
- (S)
-
Aborts processing.
- (O)
-
Check the access permissions for the %allusersprofile%#\Hitachi\JP1\JP1_DEFAULT\JP1AJS2PO folder.
- #
-
By default, %allusersprofile% represents system-drive:\ProgramData.
-
KAVR2254-E
The map PDF output failed. (An attempt to start Excel has failed.)
Map PDF output failed because Microsoft Excel could not be started.
- (S)
-
Aborts processing.
- (O)
-
Make sure that a version of Microsoft Excel that supports map PDF output is able to start in your environment.
-
KAVR2255-E
The map PDF output failed. (An attempt to convert the output file to PDF format has failed.)
Map PDF output failed because the data in the input file could not be converted to PDF format.
-
A version of Microsoft Excel that supports map PDF output is not installed.
-
The path to the file exceeds 218 characters.
- (S)
-
Aborts processing.
- (O)
-
-
Make sure that a version of Microsoft Excel that supports map PDF output is able to start in your environment.
-
Make sure that the path to the file does not exceed 218 characters, and try again.
-
-
-
KAVR2259-E
The map output failed.
Map output has failed.
- (S)
-
Aborts processing.
- (O)
-
Contact the system administrator.
-
KAVR2260-E
The map PDF output failed.
Map PDF output has failed.
- (S)
-
Aborts processing.
- (O)
-
Contact the system administrator.
-
KAVR2261-E
The jobnet flow output failed. (An attempt to create the work file has failed.)
Jobnet flow output failed because an attempt to create a work file failed.
- (S)
-
Aborts processing.
- (O)
-
Check the access permissions for the %allusersprofile%#\Hitachi\JP1\JP1_DEFAULT\JP1AJS2PO folder.
- #
-
By default, %allusersprofile% represents system-drive:\ProgramData.
-
KAVR2262-E
The jobnet flow output failed. (An attempt to start Excel has failed.)
Jobnet flow output failed because Microsoft Excel could not be started.
- (S)
-
Aborts processing.
- (O)
-
Make sure that Microsoft Excel is able to start in your environment.
-
KAVR2263-E
The jobnet flow PDF output failed. (An attempt to create the work file has failed.)
Jobnet flow PDF output failed because an attempt to create a work file failed.
- (S)
-
Aborts processing.
- (O)
-
Check the access permissions for the %allusersprofile%#\Hitachi\JP1\JP1_DEFAULT\JP1AJS2PO folder.
- #
-
By default, %allusersprofile% represents system-drive:\ProgramData.
-
KAVR2264-E
The jobnet flow PDF output failed. (An attempt to start Excel has failed.)
Jobnet flow PDF output failed because Microsoft Excel could not be started.
- (S)
-
Aborts processing.
- (O)
-
Make sure that a version of Microsoft Excel that supports jobnet flow PDF output is able to start in your environment.
-
KAVR2265-E
The jobnet flow PDF output failed. (An attempt to convert the output file to PDF format has failed.)
Jobnet flow PDF output failed because the data in the input file could not be converted to PDF format.
-
A version of Microsoft Excel that supports jobnet flow PDF output is not installed.
-
The path to the file exceeds 218 characters.
- (S)
-
Aborts processing.
- (O)
-
-
Make sure that a version of Microsoft Excel that supports jobnet flow PDF output is able to start in your environment.
-
Make sure that the path to the file does not exceed 218 characters, and try again.
-
-
-
KAVR2269-E
The jobnet flow output failed.
Jobnet flow output failed.
- (S)
-
Aborts processing.
- (O)
-
Contact the system administrator.
-
KAVR2270-E
The jobnet flow PDF output failed.
Jobnet flow PDF output failed.
- (S)
-
Aborts processing.
- (O)
-
Contact the system administrator.
-
KAVR2301-E
The specified print range is invalid.
The end date of the print range is earlier than the start date.
- (S)
-
Aborts processing.
- (O)
-
Specify the print range correctly, and try again.
-
KAVR2302-E
The specified print start date is invalid.
The start date of the print range is specified incorrectly.
- (S)
-
Aborts processing.
- (O)
-
Specify the start date of the print range correctly, and try again.
-
KAVR2303-E
The specified print end date is invalid.
The end date of the print range is specified incorrectly.
- (S)
-
Aborts processing.
- (O)
-
Specify the end date of the print range correctly, and try again.
-
KAVR2901-Q
JP1/AJS2 - Print Option will end. Do you want to continue?
This message asks the user to confirm closing the program.
- (S)
-
Waits for a response.
- (O)
-
Specify Yes to close the program.
To cancel the operation, specify No.
-
KAVR3000-I
The job map output ended successfully.
Indicates that map output has ended normally.
- (S)
-
Waits for a response.
- (O)
-
Specify OK to finish the map output process.
-
KAVR3001-E
The map output failed. Check the output file.
Because map output ended abnormally, this message prompts the user to check the output map.
- (S)
-
Waits for a response.
- (O)
-
Specify OK to finish the map output process.
-
KAVR3002-I
Processing will now stop.
This message indicates that processing has stopped because it was canceled by an operator.
- (S)
-
Waits for a response.
- (O)
-
Specify OK to finish processing.
-
KAVR3003-I
The jobnet flow output ended successfully.
Indicates that a jobnet flow image was output successfully.
- (S)
-
Waits for a response.
- (O)
-
Specify OK to finish processing.
-
KAVR3004-E
The jobnet flow output failed. Check the output file.
Because jobnet flow output ended abnormally, this message prompts the user to check the output jobnet flow image.
- (S)
-
Waits for a response.
- (O)
-
Specify OK to finish processing.
-
KAVR3005-E
The specified levels of job hierarchical tree is invalid.
The number of hierarchical levels is specified incorrectly.
- (S)
-
Aborts processing.
- (O)
-
Enter the number of hierarchical levels correctly, and try again.
-
KAVR3006-E
The jobnet flow output exceeded the maximum value of 256 for columns.
Indicates that the jobnet flow output exceeded Microsoft Excel's maximum number for columns, 256, and ended abnormally.
- (S)
-
Waits for a response.
- (O)
-
Specify OK to terminate processing.
Take one of the following measures:
-
Change the data layout specified for the jobnet flow format definition from 2 columns format to 1 column format.
-
Check the Microsoft Excel output result last output for a jobnet flow output. Use the jobnet editor of JP1/AJS3 - View to open the jobnet map that cannot be output, and then adjust the horizontal position inside each unit icon map area so that their map size is 85 or lower.
-
If you are using Microsoft Excel 2007 or later, under Excel Options, open the Save tab. Change the settings of Save files in this format to a format that does not switch to Compatibility Mode when you open a new book.
-
-
KAVR3010-E
An error occurred during a file read.
file-name (Err: error-code)
An attempt to load a file has failed.
- (S)
-
Aborts processing.
- (O)
-
Make sure that the file is accessible, and try again.
-
KAVR3011-E
This file data is corrupted.
The specified job operation information file or jobnet flow format definition file is corrupted.
- (S)
-
Aborts processing.
- (O)
-
Re-create the job operation information file or jobnet flow format definition file, and try again.
-
KAVR3012-E
An error occurred during a file write.
file-name (Err: error-code)
An attempt to write to a file has failed.
- (S)
-
Aborts processing.
- (O)
-
Make sure that the file is accessible, and try again.
-
KAVR3013-E
The specified output file name is invalid.
The output file name is specified incorrectly. Possible causes are:
-
The specified directory does not exist
-
The name of the directory or file contains an illegal character
-
The system could not create the specified file
- (S)
-
Aborts processing.
- (O)
-
Specify the file name correctly, and try again.
-
-
KAVR3014-E
The file name is too long. Specify a file name that has 63 or shorter bytes.
The file name is longer than 63 bytes.
- (S)
-
Aborts processing.
- (O)
-
Specify a file name of 63 or fewer bytes, and try again.
-
KAVR3015-E
The file path name is too long. Specify a file path name that has 258 or shorter bytes.
You cannot use the specified file because its path and file name exceed 258 bytes in total.
- (S)
-
Aborts processing.
- (O)
-
Specify a path and file name of 258 or fewer total bytes, and try again.
-
KAVR3016-E
The folder path name is too long. Specify a folder path name that has 194 or shorter bytes.
You cannot use the specified path because it is longer than 194 bytes.
- (S)
-
Aborts processing.
- (O)
-
Specify a path of 194 bytes or fewer, and try again.
-
KAVR3020-I
The below file was output.
file-name
A PDF file was output successfully.
- (S)
-
Continues processing.
-
KAVR3021-E
The map PDF output failed.
An attempt to perform map PDF output has failed.
- (S)
-
Waits for a response.
- (O)
-
Specify OK to finish processing.
-
KAVR3022-E
The jobnet flow PDF output failed.
Jobnet flow PDF output ended abnormally.
- (S)
-
Waits for a response.
- (O)
-
Specify OK to finish processing.
-
KAVR3023-E
The jobnet flow PDF output exceeded the maximum value of 256 for columns.
Indicates that the jobnet flow PDF output exceeded Microsoft Excel's maximum number for columns, 256, and ended abnormally.
- (S)
-
Waits for a response.
- (O)
-
Specify OK to terminate processing.
Take one of the following measures:
-
Change the data layout specified for the jobnet flow format definition from 2 columns format to 1 column format.
-
Use the jobnet editor of JP1/AJS3 - View to open the jobnet map that was output with the jobnet flow PDF output, and then adjust the horizontal position inside each unit icon map area so that their map size is 85 or lower.
-
If you are using Microsoft Excel 2007 or later, under Excel Options, open the Save tab. Change the settings of Save files in this format to a format that does not switch to Compatibility Mode when you open a new book.
-
-
KAVR3030-E
You cannot use the default printer.
The default printer is unavailable.
- (S)
-
Aborts processing.
- (O)
-
Review the configuration of your default printer, and then try again. If your default printer is a networked printer, check the connection to the print server.
If you do not need to print the document, perform one of the following and try again.
-
Set a dummy local printer as the default printer
-
Remove all printers from the system
-
-
KAVR3050-W
The size of the data in the jobnet flow output file exceeded the limit.
- The size of all data in a cell exceeded 32,000 bytes.
- The size of a data in a cell exceeded 4,095 bytes.
- The number of lines in a cell exceeded 2,000.
An item in the jobnet flow output data exceeded one of the restrictions below. The messages in italics are output in a message dialog only when that particular condition is met.
-
The total data in a cell exceeds 32,000 bytes
-
The characters in one piece of data in a cell exceeds 4,095 bytes
-
The number of lines in a cell exceeds 2,000
- (S)
-
Continues processing.
- (O)
-
View the log file (JP1/AJS3-Print-Option-installation-folder\Log\ajs2po.log), and review the value in the cell that exceeded the limit.
-
-
KAVR4000-E
Job operation information file name must be specified.
You must specify a job operation information file name.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4001-E
Format definition file name must be specified.
You must specify a format definition file name.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4002-E
The specified job operation information file name is invalid.
-
The specified file does not have the extension aoi
-
The specified file does not have an extension
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4003-E
The specified format definition file name is invalid.
-
The specified file does not have the extension jof
-
The specified file does not have an extension
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4004-E
The specified CSV file name is invalid.
-
The extension of the specified file is not CSV
-
The specified file does not have an extension
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4005-E
CSV file name must be specified.
-
The -c option is specified without a CSV file name
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4006-E
The job operation information file cannot be read.
-
The specified job operation information file does not exist.
-
The contents of the specified job operation information file are invalid.
-
You do not have access permission for the specified job operation information file, or the file is currently in use.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4007-E
The format definition file cannot be read.
-
The specified format definition file does not exist.
-
The contents of the specified format definition are invalid.
-
You do not have access permission for the specified format definition file, or the file is currently in use.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4008-E
The CSV file cannot be written.
-
You do not have access permission for the destination file, or the file is already in use.
-
The file name is specified incorrectly.
-
The specified file already exists (when -u option is not specified).
-
The write destination disk has insufficient space.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4009-E
You cannot use the default printer.
-
No default printer is set
- (S)
-
Aborts processing.
- (O)
-
Set a default printer, and try again.
-
-
KAVR4010-E
You can use neither daily nor monthly format definition when execution schedule/result information is not contained in the job operation information file.
-
You specified a monthly or daily format definition but the job operation information file does not contain execution schedules or results.
- (S)
-
Aborts processing.
- (O)
-
Specify a job operation information file that contains execution schedules and results, and try again.
-
-
KAVR4011-W
The monthly or daily document is not output in 48 hours, because the execution date information for the jobnet does not exist.
The jobnet execution schedule information did not exist, so the monthly or daily document was output in 24 hours. The possible causes are as follows:
-
The job operation information file that contains the information collected by JP1/AJS2 - Print Option Manager License 07-10 or earlier was used.
-
The job operation information file did not contain the definition and execution schedule information of an upper-level jobnet of the output target job.
- (S)
-
Continues processing.
- (O)
-
To output a monthly or daily document in 48 hours, try again by using the job operation information file as follows:
-
Use a job operation information file that contains the information collected by JP1/AJS2 - Print Option Manager License 07-50 or later, or by JP1/AJS3 Print Option Manager.
-
Collect the job operation information in such a way that information of an upper-level jobnet of the output target job is contained.
To stop displaying this message, in the View Settings tab of the Environment Settings window, set 24 hours for Monthly and daily display hours.
-
-
-
KAVR4012-E
An attempt to create map output file has failed. (The work file could not be created.)
Map output failed due to a failure to create the work file.
- (S)
-
Aborts processing.
- (O)
-
Check the access permissions to the %allusersprofile%#\Hitachi\JP1\JP1_DEFAULT\JP1AJS2PO folder.
- #
-
%allusersprofile% refers to system-drive:\ProgramData by default.
-
KAVR4013-E
Prerequisite program for map output is not installed.
Map output failed due to some of the prerequisite programs not being installed.
- (S)
-
Aborts processing.
- (O)
-
Install the prerequisite programs.
-
KAVR4014-E
The specified map output file name is invalid.
-
The name of a file whose extension is not xlsx was specified.
-
The file extension was not specified.
-
The specified directory does not exist.
-
The name of the directory or file contains an illegal character.
-
The directory name contains more than 194 bytes, or the file path name contains more than 258 bytes.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4015-E
Map output file name must be specified.
-
The -m option is specified, but no map output file name is specified.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4016-E
An attempt to create map output file has failed.
An attempt to create map output file has failed.
- (S)
-
Aborts processing.
- (O)
-
Contact the system administrator.
-
KAVR4017-E
An attempt to save map output file has failed.
-
You do not have access permission for the destination file, or the file is already in use.
-
The file name is specified incorrectly.
-
The specified file already exists (when the -u option is not specified).
-
The write destination disk has insufficient space.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4018-E
An attempt to create jobnet flow output file has failed. (The work file could not be created.)
Jobnet flow output failed due to a failure in the process of creating the work file.
- (S)
-
Aborts processing.
- (O)
-
Check the access permissions to the %allusersprofile%#\Hitachi\JP1\JP1_DEFAULT\JP1AJS2PO folder.
- #
-
%allusersprofile% refers to system-drive:\ProgramData by default.
-
KAVR4019-E
Prerequisite program for jobnet flow output is not installed.
Jobnet flow output failed due to some of the prerequisite programs not being installed.
- (S)
-
Aborts processing.
- (O)
-
Install the prerequisite programs.
-
KAVR4020-E
The specified jobnet flow output file name is invalid.
-
The name of a file whose extension is not xlsx was specified.
-
The file extension was not specified.
-
The specified directory does not exist.
-
The name of the directory or file contains an illegal character.
-
The directory name contains more than 194 bytes, or the file path name contains more than 258 bytes.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4021-E
Jobnet flow output file name must be specified.
-
The -l option is specified, but no jobnet flow output file name is specified.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4022-E
An attempt to create jobnet flow output file has failed.
An attempt to create jobnet flow output file has failed.
- (S)
-
Aborts processing.
- (O)
-
Contact the system administrator.
-
KAVR4023-E
The jobnet flow format definition file cannot be read.
-
The specified jobnet flow format definition file does not exist.
-
The specified jobnet flow format definition file contains invalid information.
-
No access permissions to the specified jobnet flow format definition file are granted, or the specified jobnet flow format definition file is in use.
- (S)
-
Aborts processing.
- (O)
-
Specify the jobnet flow format definition file correctly in the Environment Settings window, and try again.
-
-
KAVR4024-E
An attempt to save jobnet flow output file has failed.
-
You do not have access permission for the destination file, or the file is already in use.
-
The file name is specified incorrectly.
-
The specified file already exists (when the -u option is not specified).
-
The write destination disk has insufficient space.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4100-E
Login name must be specified.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4101-E
Password must be specified.
The password cannot be omitted.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4102-E
Password and confirm password do not match.
The confirm password has a different value from the password.
- (S)
-
Aborts processing.
- (O)
-
Enter the same value for the confirm password as that for the password, and try again.
-
KAVR4103-E
JP1/AJS3 - Manager host name must be specified.
The JP1/AJS3 - Manager host name cannot be omitted.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4104-E
The specified JP1/AJS3 - Manager host name and login name already exist in authentication information file.
- (S)
-
Aborts processing.
- (O)
-
Take one of the following measures:
-
Update the authentication information by specifying the JP1/AJS3 - Manager host name, login user name, and password in the -u option.
-
Delete the authentication information by specifying the JP1/AJS3 - Manager host name and login user name in the -d option, and then register them again with the -a option.
-
-
KAVR4105-E
An attempt to encrypt authentication information file has failed.
The encryption file output failed due to a failure in the process of encrypting authentication information.
- (S)
-
Aborts processing.
- (O)
-
Contact the system administrator.
-
KAVR4106-E
An attempt to save authentication information file has failed.
-
You do not have access permission for the destination file.
-
The write destination disk has insufficient space.
- (S)
-
Aborts processing.
- (O)
-
-
Check the access permissions to the %allusersprofile%#\Hitachi\JP1\JP1_DEFAULT\JP1AJS2PO folder.
-
Check that the system drive has free disk space.
- #:
-
%allusersprofile% refers to system-drive:\ProgramData by default.
-
-
-
KAVR4107-E
The authentication information file cannot be read.
-
You do not have access permission for the authentication information file.
-
The authentication information file is already in use.
- (S)
-
Aborts processing.
- (O)
-
-
Check the access permissions to the %allusersprofile%#\Hitachi\JP1\JP1_DEFAULT\JP1AJS2PO folder.
-
Wait for a while, and try again.
- #:
-
%allusersprofile% refers to system-drive:\ProgramData by default.
-
-
-
KAVR4108-E
The specified JP1/AJS3 - Manager host name and login name do not exist in authentication information file.
The specified JP1/AJS3 - Manager host name and login name do not exist in authentication information file.
- (S)
-
Aborts processing.
- (O)
-
Check the JP1/AJS3 - Manager host name and login user name registered in the authentication information file by using the -l option, and try again.
-
KAVR4109-E
The authentication information does not exist in authentication information file.
The authentication information does not exist in authentication information file.
- (S)
-
Aborts processing.
- (O)
-
Register authentication information by using the -a option, and try again.
-
KAVR4110-I
The specified authentication information was added to authentication information file.
- (S)
-
The specified authentication information was added to authentication information file.
-
KAVR4111-I
The specified authentication information was deleted from authentication information file.
- (S)
-
The specified authentication information was deleted from authentication information file.
-
KAVR4112-I
Authentication information file was updated with the specified authentication information.
- (S)
-
Authentication information file was updated with the specified authentication information.
-
KAVR4200-E
Job operation information could not be collected.
An attempt to collect job operation information has failed. The possible causes are as follows:
-
The specified unit does not exist.
-
The JP1/AJS3 scheduler service is not running.
-
The output file cannot be created.
-
The execution permissions of the JP1 user specified for login authentication of JP1/AJS3 - Manager are not granted to the JP1 resource group as the target unit.
- (S)
-
Aborts processing.
- (O)
-
-
Specify a unit that exists.
-
Start the JP1/AJS3 scheduler service.
-
Check the write permission for the specified output target.
-
Grant the execution permissions of the ajsprint command and ajsshow command to the JP1 resource group as the target unit that the JP1 user specified for login authentication of JP1/AJS3 - Manager belongs to.
See the execution log information, investigate the cause carefully, remove the cause of the failure, and then try again. The execution log information is recorded in the file output-file-name.log.
-
-
-
KAVR4201-W
Only definition information was collected. Execution schedule/result information could not be collected.
JP1/AJS3 - Print Option was able to collect definition information, but could not collect execution schedules and results. Possible causes are:
-
The specified unit has not been registered for execution.
-
There are no execution schedules or results in the specified collection period.
-
You specified a job group in which one or more of the constituent units have not been registered for execution.
In this case, JP1/AJS3 - Print Option collects execution schedules and results for the units that have been registered for execution.
- (S)
-
Continues processing.
- (O)
-
You can output documents that contain definition information.
If you need the document to contain execution schedules and results, identify and address the cause of the error by referring to the execution logs, and then try again. The execution log information is recorded in the file output-file-name.log.
-
-
KAVR4202-E
You cannot to specify the generic name for unit name.
You cannot use wildcards (* and ?) when specifying unit names.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4203-E
Unit name must be specified.
You must specify a unit name.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4204-E
Job operation information file name must be specified.
You must specify a job operation information file name.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4205-E
The specified job operation information file name is invalid.
The specified job operation information file name is invalid. The possible causes are as follows:
-
The specified directory does not exist.
-
The name of the directory or file contains an illegal character.
-
The directory name contains more than 194 bytes, or the file path name contains more than 258 bytes.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
-
KAVR4206-E
Specify -b argument and -e argument with the pair.
The -b argument and the -e argument must be specified together.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4207-E
Prerequisite program is not installed. (Detailed information: detailed information)
A prerequisite program is not installed properly. The causes are as follows:
-
The version of JP1/AJS3 - Web Console is 12-10 or earlier.
-
JP1/AJS3 - Manager is not installed, or its version is 12-10 or earlier.
-
JP1/AJS3 - Print Option Manager is not installed, or its version is 12-00 or earlier.
- (S)
-
Aborts processing.
- (O)
-
-
Install JP1/AJS3 - Web Console 12-50 or later.
-
Install JP1/AJS3 - Manager 12-50 or later.
-
Install JP1/AJS3 - Print Option Manager 12-50 or later.
-
-
-
KAVR4208-E
The authentication information file cannot be read.
-
The authentication information file does not exist.
-
You do not have access permission for the authentication information file.
-
The authentication information file is already in use.
- (S)
-
Aborts processing.
- (O)
-
-
Register authentication information by using jprajsmkkey command, and try again.
-
Check the access permissions to the %allusersprofile%#\Hitachi\JP1\JP1_DEFAULT\JP1AJS2PO folder.
-
Wait for a while, and try again.
- #:
-
%allusersprofile% refers to system-drive:\ProgramData by default.
-
-
-
KAVR4209-E
Login name must be specified.
Login name must be specified.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4210-E
JP1/AJS3 - Manager host name must be specified.
JP1/AJS3 - Manager host name must be specified.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4211-E
JP1/AJS3 - Web Console host name must be specified.
JP1/AJS3 - Web Console host name must be specified.
- (S)
-
Aborts processing.
- (O)
-
Enter the argument correctly, and try again.
-
KAVR4212-E
The specified JP1/AJS3 - Manager host name and login name do not exist in authentication information file.
The specified JP1/AJS3 - Manager host name and login name do not exist in authentication information file.
- (S)
-
Aborts processing.
- (O)
-
Check that the JP1/AJS3 - Manager host name and login user name are registered as authentication information by using the jprajsmkkey command with the -l option, and then try again.
-
KAVR4213-E
An attempt to save job operation information file has failed.
-
You do not have access permission for the destination file, or the file is already in use.
-
The specified file already exists (when the -z option is not specified).
-
The write destination disk has insufficient space.
- (S)
-
Aborts processing.
- (O)
-
-
Check the access permissions for the destination file.
-
Wait for a while, and try again.
-
If the specified file exists in the write destination, specify a different file name or use the -z option.
-
Make sure that sufficient disk space is available by deleting unnecessary files.
-
-
-
KAVR4214-E
An error occurred during authentication process.
-
The port number specified for use in communication with JP1/AJS3 - Web Console is not available.
-
An invalid protocol was specified for communication with JP1/AJS3 - Web Console.
-
An error occurred during the process of communication with JP1/AJS3 - Web Console.
-
An authentication error occurred with the user and password in the specified authentication information file.
- (S)
-
Aborts processing.
- (O)
-
-
Check if the port number specified for use in communication with JP1/AJS3 - Web Console is available.
-
Check if the protocol specified for communication with JP1/AJS3 - Web Console is valid.
-
Check the network settings and the firewall settings.
-
Check if the user and password in the specified authentication information file are correct.
-
-
-
KAVR4215-E
An attempt to access to file has failed.
A file I/O error occurred.
- (S)
-
Aborts processing.
- (O)
-
Check the status of the file system.
-
KAVR4216-E
An error occurred in JP1/AJS3- Web Console. (Detailed information: detailed information)
An error occurred in JP1/AJS3- Web Console. The causes are as follows:
-
The specified JP1/AJS3 - Manager host does not allow JP1/AJS3 - Web Console to connect to it.
-
The number of commands to be concurrently executed on the JP1/AJS3 - Manager host to connect to has been exceeded.
-
Downloading the job operation information file exceeded its time limit.
- (S)
-
Aborts processing.
- (O)
-
-
Check if the JP1/AJS3 - Manager host to connect to allows JP1/AJS3 - Web Console to connect to the host.
-
Check the number of commands to be concurrently executed on the JP1/AJS3 - Manager host to connect to.
-
Review the collection conditions and reduce the size of the job operation information file, or wait for a while and try again.
If the problem is not solved with the above actions, collect the files required for troubleshooting, and contact maintenance personnel.
-
-
-
KAVR4501-W
Because output information does not exist, processing is ended.
-
The job operation information file does not contain any information for the unit types specified in the format definition file.
- (S)
-
Aborts processing.
-
-
KAVR4502-W
An unsupported unit type is contained in the job operation information file.
The job operation information file contains a unit type that is not supported by the current version of JP1/AJS3 - Print Option.
- (S)
-
Continues processing.
- (O)
-
Check which unit types are unsupported.
Symbols are displayed for unsupported unit types even if Description is specified as the display format for the column item in the format definition.
-
KAVR5000-E
An error occurred during communication.
-
The port number to be used by the JP1/AJS3 - Print Option Manager service is not registered.
-
The port numbers to be used by the JP1/AJS3 - Print Option Manager service are duplicated.
-
A communication error occurred when collecting job operation information.
-
The JP1/AJS3 - Print Option Manager service is not running.
- (S)
-
Aborts processing.
- (O)
-
-
Check that the port number to be used by the JP1/AJS3 - Print Option Manager service is properly registered in the Services file.
-
Check that the port numbers to be used by the JP1/AJS3 - Print Option Manager service are not duplicated.
-
Check the network and firewall configurations.
-
Start the JP1/AJS3 - Print Option Manager service.
-
-
-
KAVR5001-E
An attempt to access to file has failed.
-
A file I/O error occurred.
- (S)
-
Aborts processing.
- (O)
-
Check the status of the file system.
-
-
KAVR5002-I
Cancel button was pushed.
-
The operator clicked the Cancel button while the job operation information file was being transferred.
- (S)
-
Cancels transfer of the job operation information file.
- (O)
-
None.
-
-
KAVR5003-E
Memory could not be allocated.
-
Insufficient memory
- (S)
-
Aborts processing.
- (O)
-
Close unnecessary programs and try again.
-
-
KAVR5004-E
JP1/AJS2 - Print Option installation location is unobtainable.
-
JP1/AJS3 - Print Option is not installed correctly.
- (S)
-
Aborts processing.
- (O)
-
Re-install JP1/AJS3 - Print Option.
-
-
KAVR5005-I
Job operation information was collected.
-
Job operation information was collected successfully.
- (S)
-
None.
- (O)
-
None.
-
-
KAVR5006-E
The arguments are invalid.
-
A command argument is specified incorrectly.
- (S)
-
Aborts processing.
- (O)
-
Check the command arguments, and then try again.
-
-
KAVR5007-I
Job operation information is being collected.
-
Job operation information is being collected.
- (S)
-
None.
- (O)
-
None.
-
-
KAVR5008-I
It is transferring the file now.
-
A job operation information file is being transferred.
- (S)
-
None.
- (O)
-
None.
-
-
KAVR5009-E
An attempt to start JP1/AJS2 - Print Option has failed.
-
An attempt to open the Job Operation Document Output window has failed.
- (S)
-
Aborts processing.
- (O)
-
Make sure that JP1/AJS3 - Print Option is installed correctly, and then try again.
-
-
KAVR5010-E
An attempt to collect the job operation information has failed.
-
A unit name is specified incorrectly in the Collecting Job Operation Information window, or the output destination for the job operation information file is specified incorrectly in the Collecting Job Operation Information window.
-
The LANG environment variable was set incorrectly when the JP1/AJS3 - Print Option Manager service was started.
-
An attempt to output a job operation information file failed because JP1/AJS3 - Print Option is not installed correctly.
-
Another program uses the port number set for the JP1/AJS3 - POM service (jp1ajs2poml).
-
The JP1/AJS3 environment setting parameter ADMACLIMIT is set to yes.
- (S)
-
Aborts processing.
- (O)
-
-
Make sure that unit names and the destination for the job operation information file are specified correctly in the Collecting Job Operation Information window.
-
Make sure that the LANG environment variable is set correctly at execution of the jprpomlstart command, and in the automatic startup script for the JP1/AJS3 - Print Option Manager service.
-
Install a version of JP1/AJS3 - Print Option that is compatible with your operating system.
-
Make sure that the port number set for the JP1/AJS3 - POM service (jp1ajs2poml) in the services file does not conflict with that of another program.
-
Take either of the following measures:
- (In Windows)
-
-
If you are operating the JP1/AJS3 - Print Option Manager service using a local system account, create a JP1 user named system and set the JP1 permission level for the JP1 resource group of the target units for the ajsprint command and the ajsshow command.
-
If you are operating the JP1/AJS3 - Print Option Manager service using a user account, create a JP1 user with the same name as the user account and set the JP1 permission level for the JP1 resource group of the target units for the ajsprint command and the ajsshow command.
-
- (In UNIX)
-
-
Create a JP1 user named root and set the JP1 permission level for the JP1 resource group of the target units for the ajsprint command and the ajsshow command.
-
-
-
-
KAVR5011-E
An attempt to start the service has failed.
-
The service could not be started.
- (S)
-
Aborts processing.
- (O)
-
Collect the files required for troubleshooting, and contact maintenance personnel.
-
-
KAVR5012-E
An attempt to start the thread has failed.
-
A thread could not be started.
- (S)
-
Aborts processing.
- (O)
-
Collect the files required for troubleshooting, and contact maintenance personnel.
-
-
KAVR5013-E
An error occurred in JP1/AJS2 - Print Option Manager License.
-
An error occurred in the JP1/AJS3 - Print Option Manager program.
- (S)
-
Aborts processing.
- (O)
-
Collect the files required for troubleshooting, and contact maintenance personnel.
-
-
KAVR5014-E
An error occurred in JP1/AJS2 - Print Option Manager License service.
-
An error occurred in the service.
- (S)
-
Aborts processing.
- (O)
-
Collect the files required for troubleshooting, and contact maintenance personnel.
-
-
KAVR5015-I
JP1/AJS2 - Print Option Manager License service was started.
-
The JP1/AJS3 - Print Option Manager service has started.
- (S)
-
None.
- (O)
-
None.
-
-
KAVR5016-I
JP1/AJS2 - Print Option Manager License service was stopped.
-
The JP1/AJS3 - Print Option Manager service has stopped.
- (S)
-
None.
- (O)
-
None.
-
-
KAVR5017-I
JP1/AJS2 - Print Option Manager License service has already been started.
-
The JP1/AJS3 - Print Option Manager service is already running.
- (S)
-
None.
- (O)
-
None.
-
-
KAVR5018-I
JP1/AJS2 - Print Option Manager License service has already been stopped.
-
The JP1/AJS3 - Print Option Manager service is already stopped.
- (S)
-
None.
- (O)
-
None.
-
-
KAVR5019-E
An attempt to start JP1/AJS2 - Print Option Manager License service has failed.
-
An attempt to start the JP1/AJS3 - Print Option Manager service failed.
- (S)
-
Aborts processing.
- (O)
-
Collect the files required for troubleshooting, and contact maintenance personnel.
-
-
KAVR5020-I
The service is stopped by receiving a signal.
-
The service will be stopped because a signal to kill the service was received.
- (S)
-
Stops the service.
- (O)
-
None.
-
-
KAVR5021-E
JP1/AJS2 - Print Option Manager License installation location is unobtainable.
-
JP1/AJS3 - Print Option Manager is not installed correctly.
- (S)
-
Aborts processing.
- (O)
-
Re-install JP1/AJS3 - Print Option Manager.
-
-
KAVR5022-E
The process is stopping now. Wait for the process to end, and then retry.
A stop request is being processed.
- (S)
-
Aborts processing.
- (O)
-
Wait a while and try again.
-
KAVR5024-E
An attempt to collect the job operation information has failed, because the version of JP1/Automatic Job Management System 2 - Print Option Manager License is old.
An attempt to collect job operation information failed because the version of JP1/AJS3 - Print Option Manager is out of date.
- (S)
-
Aborts processing.
- (O)
-
Upgrade JP1/AJS3 - Print Option Manager.
-
KAVR5027-E
An attempt to read the product information failed. (Detailed information: function-name, return-code)
An attempt to read product information has failed.
- (S)
-
Aborts processing.
- (O)
-
If you changed the system time to a time earlier than the installation time of the product, change the time back, and then try the operation again.
For any other cases, perform an overwrite installation and then try the operation again. If this message appears again after the overwrite installation, uninstall the product, re-install it, and then retry the operation.