8.4.3 Details of the service property file
- Organization of this subsection
(1) Search data update interval (NPUPDIVAL)
This property specifies the interval at which the search data is to be updated.
When 0 is specified, the search data is not updated. In such a case, use the npupdatesearchdata command (update search data) to update the search data.
Permitted values: 0 or integers in the range from 300 to 86400 (seconds)
Default value: 0 (seconds)
- Supplemental notes
-
-
The performance of window operations is degraded while search data is being updated. Therefore, specify a value that is appropriate to the operation.
-
If you will not be using the search function, specify 0.
-
(2) Operation log analysis time (NPANLTIME)
This property specifies the time at which the operation log is to be analyzed, in the 24-hour format.
This property takes effect only when the following conditions are satisfied:
-
true is set in the ucnp.base.client.operationlog.enable property.
-
Not all is set in the ucnp.base.client.directjump.enable property.
Permitted values: Four-digit integers with the first two digits in the range from 00 to 23 and the last two digits in the range from 00 to 59
Default value: 0000
- Example
-
To perform log analysis at 01:30, enter 0130.
- Supplemental notes
-
-
This property assumes the time zone of the server's OS.
-
It takes time to analyze operation logs. If operations are performed on Operational Contents while analysis processing is underway, those operations might require some time. Therefore, we recommend that you perform analysis processing at a time when traffic with Navigation Platform is light.
-
(3) Time operation logs are analyzed by the dashboard function (NPDASHBOARDANLTIME)
This property specifies the time, in 24-hour format, at which operation logs are to be analyzed by the dashboard function.
This property takes effect only when the following condition is satisfied:
-
true is set in the ucnp.base.client.operationlog.enable property.
Permitted values: Four-digit integers where the first two digits are in the range from 00 to 23 and the last two digits in the range from 00 to 59
Default value: 0400
- Example
-
To perform log analysis at 01:30, enter 0130.
- Supplemental notes
-
-
This property assumes the time zone of the server's OS.
-
It takes time to analyze operation logs. If operations are performed on Operational Contents while analysis processing is underway, those operations might require some time. Therefore, we recommend that you perform analysis processing at a time when traffic with Navigation Platform is light.
-