1.1 New installation procedure
After checking the prerequisites, install JP1/AO from the distribution media.
The following table describes the procedure for a new installation.
Task |
Required/optional |
Reference |
|
|---|---|---|---|
1 |
Check the installation prerequisites. |
Required |
|
|
2 |
If the JP1/AO server OS is Linux 8, verify that the ports that JP1/AO will use are not in use. |
Required |
1.2.3 Check the port to use |
|
3 |
Perform a new installation of JP1/AO from the distribution media. |
Required |
|
|
4 |
Install the manual on the JP1/AO server. |
Optional |
|
|
5 |
Install JP1/AO Content Pack. |
Optional |
|
|
6 |
Enable HTTPS connections between Web browsers and JP1/AO servers. |
Optional |
1.6 Procedure to enable HTTPS connections between Web browsers and JP1/AO |
|
7 |
Enable SSH connections with operation target devices. |
Optional |
|