Contents

• Notices

• Summary of amendments

• Preface

• Part 1: Windows Host

  • 1. Types of JP1/AJS3 System Configuration and System Setup Procedures

    • 1.1 Overview of setting up JP1/AJS3

      • 1.1.1 Procedure for setting up a system with JP1/AJS3 - Manager and JP1/AJS3 - View

      • 1.1.2 Procedure for setting up a system in a manager/agent configuration that uses only one JP1/AJS3 - Manager host

      • 1.1.3 Procedure for setting up a system in a manager/agent configuration that uses several JP1/AJS3 - Manager hosts

  • 2. Installation

    • 2.1 Required task before installing JP1/AJS3 series programs

      • 2.1.1 Installing JP1/Base

    • 2.2 Installing JP1/AJS3 series programs

      • 2.2.1 Notes on installation

      • 2.2.2 Installing a JP1/AJS3 series program

  • 3. Setup

    • 3.1 Required setup for JP1/AJS3 - Manager

      • 3.1.1 Setting up JP1/Base

      • 3.1.2 Setting up JP1/AJS3 - Manager

    • 3.2 Required setup for JP1/AJS3 - Agent

      • 3.2.1 Setting up JP1/Base

      • 3.2.2 Setting up JP1/AJS3 - Agent

    • 3.3 Required setup for JP1/AJS3 - View

    • 3.4 Setup required to use JP1/AJS3 - Web Console

      • 3.4.1 Setting up JP1/AJS3 - Manager

      • 3.4.2 Setting up JP1/AJS3 - Web Console

      • 3.4.3 Details on the settings in the environment-settings file (ajs3web.conf)

      • 3.4.4 Details on the settings in the network-settings file (ajscd_ajs3web.properties)

      • 3.4.5 Details on the settings in the HTTP server definition file (httpsd.conf)

      • 3.4.6 Details on the settings in the user properties file for J2EE server (usrconf.properties)

      • 3.4.7 Details on the settings in the worker definition file (workers.properties)

      • 3.4.8 Details on the settings in the display color settings file (ajs3web_color.conf)

      • 3.4.9 Details on the settings in the option definition file for J2EE server (usrconf.cfg)

      • 3.4.10 Web browser settings

    • 3.5 Setting up the system and user environments

      • 3.5.1 Extending trace log files

      • 3.5.2 Specifying communication environment settings

      • 3.5.3 Settings for communication using IPv6 addresses

    • 3.6 Required setup for upgrading

      • 3.6.1 Settings for enhancing the embedded database management function

      • 3.6.2 Settings for reducing the data area usage in the embedded database

  • 4. Environment Settings

    • 4.1 Execution agent settings

      • 4.1.1 Procedure for specifying execution agent settings

    • 4.2 Environment setting parameter settings

      • 4.2.1 Procedure for setting the environment setting parameters by using the jajs_config command

      • 4.2.2 Procedure for setting the environment setting parameters by using the jbssetcnf command

  • 5. JP1/AJS3 - View Environment Settings

    • 5.1 Procedure for changing the JP1/AJS3 - View environment settings

  • 6. Specifying Settings Based on the Usage of JP1/AJS3

    • 6.1 Settings for controlling the scheduler

      • 6.1.1 Settings for starting multiple scheduler services

      • 6.1.2 Changing the level of messages output from scheduler services to the integrated trace log

      • 6.1.3 Changing the method for outputting the schedule rule when outputting nested-jobnet definition parameters

      • 6.1.4 Changing the name of a scheduler trace log file

      • 6.1.5 Setting to output a scheduler trace log per scheduler service

      • 6.1.6 Enabling the suspend function

      • 6.1.7 Changing the mode in which unregistration or generation management deletes the generations of a jobnet

      • 6.1.8 Settings for using wait conditions

      • 6.1.9 Settings for using the temporary change operation management function

      • 6.1.10 Settings for preventing scheduler services for which the user does not have access permission from appearing in JP1/AJS3 - View

      • 6.1.11 Settings for restricting the maximum number of allowed concurrent sessions for scheduler services

      • 6.1.12 Setting to reduce the number of ports used for internal communications by the scheduler service at job execution

    • 6.2 Settings for controlling job execution

      • 6.2.1 Defining variables for work paths used during job execution

      • 6.2.2 Defining search paths for a file to be transferred

      • 6.2.3 Customizing the execution agent or agent attribute values created by the automatic agent definition function

      • 6.2.4 Checking the messages output at the same time by a job to the standard output and standard error output

      • 6.2.5 Changing the interval and number of resend attempts for job result files

      • 6.2.6 Preventing duplicated reception of job result files

      • 6.2.7 Placing restrictions on file reception

      • 6.2.8 Changing the timeout period, interval of retries, and number of retries for TCP/IP connections

      • 6.2.9 Setting the method for determining the agent host to which a job will be delivered

      • 6.2.10 Setting the action to be taken if the value of a macro variable cannot be passed

      • 6.2.11 Setting the handling of a macro variable when the value is a NULL string

      • 6.2.12 Changing the wait time for recovery when an agent has failed

      • 6.2.13 Outputting a message that reports that the maximum number of concurrently executable jobs has been reached

      • 6.2.14 Changing the timeout value for the job execution control manager process

      • 6.2.15 Executing a job by using a long file name

      • 6.2.16 Executing a job that requires a user profile

      • 6.2.17 Reusing access tokens for job execution

      • 6.2.18 Executing a job whose executable file name has an extension longer than three bytes

      • 6.2.19 Changing the settings for logon retries when a job is executed

      • 6.2.20 Placing all running jobs in an end status when a communication error occurs

      • 6.2.21 Settings for enabling an environment variable in a job definition when the name is the same as a system environment variable name

      • 6.2.22 Settings for executing jobs as a user with administrator permissions when the UAC is enabled

      • 6.2.23 Settings for re-executing the dependent units

      • 6.2.24 Operation settings when job result file transfer fails

      • 6.2.25 Settings for using the return value of the preceding job in the passing information setting jobs

      • 6.2.26 Setting for ensuring that data generated by jobs is output to result files

      • 6.2.27 Placing restrictions on file transmission

      • 6.2.28 Setting to increase the maximum number of execution agents that can be registered in a manager host

    • 6.3 Changing the settings related to event/action control

      • 6.3.1 Changing the settings related to the size of the log for event jobs to match operational requirements

      • 6.3.2 Setting the event order option

      • 6.3.3 Setting the status passing option for the file monitoring job

      • 6.3.4 Passing event data containing double quotation marks

      • 6.3.5 Using fully qualified domain names (FQDN) when using event jobs during DNS operation

      • 6.3.6 Resuming event jobs that stopped when the JP1/AJS3 service stopped

      • 6.3.7 Retrying startup notification of the event/action control agent

      • 6.3.8 Setting the agent host name resolution option

      • 6.3.9 Applying a timeout for receiving data in inter-process communication by event/action control

      • 6.3.10 Setting the period of time for monitoring event jobs in the blocked status

      • 6.3.11 Setting the binding method applied to the outgoing communication used in the execution of event jobs

      • 6.3.12 Settings for ensuring that the sending of unreported information is retried at regular intervals

      • 6.3.13 Changing the send retry interval and the number of retries for sending unreported information

      • 6.3.14 Setting the connection timeout for communication between the event/action control manager and agent

      • 6.3.15 Environment setting parameters related to communication for event/action control

      • 6.3.16 Settings for ensuring that a fixed manager host name is used when event jobs are executed

      • 6.3.17 Enabling monitoring of a large file

      • 6.3.18 Setting the event server name in the system using DNS

      • 6.3.19 How to set the option for changing the agent information to be used for name resolution

    • 6.4 Changing the settings related to queueless job execution control

      • 6.4.1 Executing jobs with a class specified in a queueless job environment

      • 6.4.2 Executing a job that requires a user profile in a queueless job execution environment

      • 6.4.3 Preventing a queueless job from ending abnormally with return value 128

    • 6.5 Changing the settings related to the definition pre-check function

      • 6.5.1 Setting up the JP1/AJS3 definition pre-check function

    • 6.6 Other settings

      • 6.6.1 Canceling and re-setting service dependencies

      • 6.6.2 Changing the JP1/AJS3 database configuration to the standard configuration without ISAM

      • 6.6.3 Settings for permitting changing JP1 user passwords in JP1/AJS3 - View

  • 7. Collecting Log Data

    • 7.1 Collecting log data

      • 7.1.1 Setting up the data collection tools

      • 7.1.2 Procedure for setting the outputting of a dump file

  • 8. Setup for Operation in a Cluster System

    • 8.1 Installation and setup required for cluster system operation

      • 8.1.1 Installation required for cluster system operation

      • 8.1.2 Setup required for cluster system operation

    • 8.2 Setting up the operating environment for cluster system operation

      • 8.2.1 Environment setup items for a cluster system

      • 8.2.2 Procedure for setting up a cluster system environment (in Windows version of JP1/AJS3 - Manager)

      • 8.2.3 Procedure for setting up a cluster system environment (in Windows version of JP1/AJS3 - Agent)

      • 8.2.4 Procedure for setting up a cluster system environment (in Windows version of JP1/AJS3 - Web Console)

      • 8.2.5 Changing the common definition information

      • 8.2.6 Registering the JP1/AJS3 service in the cluster software

      • 8.2.7 Setting up the queueless job execution environment

      • 8.2.8 Deleting logical hosts

      • 8.2.9 Setting startup of multiple scheduler services on a logical host

    • 8.3 Notes on cluster operation

  • 9. Setup Required for Disaster Recovery Operation

    • 9.1 Overview of the setup required for disaster recovery operation

      • 9.1.1 Overview of the setup required for disaster recovery operation (when using different names for the main-site and remote-site logical hosts)

      • 9.1.2 Overview of the setup required for disaster recovery operation (when using the same name for the main-site and remote-site logical hosts)

    • 9.2 Setting up the main site and remote site

      • 9.2.1 Setting up the main site when using different names for the main-site and remote-site logical hosts

      • 9.2.2 Setting up the main site when using the same name for the main-site and remote-site logical hosts

      • 9.2.3 Setting up the remote site

    • 9.3 Setting up JP1/AJS3 - Agent

  • 10. Uninstallation

    • 10.1 Uninstalling JP1/Base

    • 10.2 Uninstalling JP1/AJS3 series programs

• Part 2: UNIX Host

  • 11. Types of JP1/AJS3 System Configuration and System Setup Procedures

    • 11.1 Overview of setting up JP1/AJS3

      • 11.1.1 Procedure for setting up a system with JP1/AJS3 - Manager and JP1/AJS3 - View

      • 11.1.2 Procedure for setting up a system in a manager/agent configuration that uses only one JP1/AJS3 - Manager host

      • 11.1.3 Procedure for setting up a system in a manager/agent configuration that uses several JP1/AJS3 - Manager hosts

  • 12. Installation

    • 12.1 Required task before installing JP1/AJS3 series programs

      • 12.1.1 Installing JP1/Base

    • 12.2 Installing JP1/AJS3 series programs

      • 12.2.1 Notes on installation

      • 12.2.2 Installation in HP-UX

      • 12.2.3 Installation in Solaris

      • 12.2.4 Installation in AIX

      • 12.2.5 Installation in Linux

      • 12.2.6 Upgrade installation in a cluster configuration

      • 12.2.7 Upgrade installation of embedded database

  • 13. Setup

    • 13.1 Required setup for JP1/AJS3 - Manager

      • 13.1.1 Setting up JP1/Base

      • 13.1.2 Setting up JP1/AJS3 - Manager

    • 13.2 Required setup for JP1/AJS3 - Agent

      • 13.2.1 Setting up JP1/Base

      • 13.2.2 Setting up JP1/AJS3 - Agent

    • 13.3 Setup required to use JP1/AJS3 - Web Console

      • 13.3.1 Setting up JP1/AJS3 - Manager

      • 13.3.2 Setting up JP1/AJS3 - Web Console (Linux only)

      • 13.3.3 Details on settings in the environment-settings file (ajs3web.conf)

      • 13.3.4 Details on settings in the network-settings file (ajscd_ajs3web.properties)

      • 13.3.5 Details on settings in the HTTP server definition file (httpsd.conf)

      • 13.3.6 Details on the settings in the user properties file for J2EE server (usrconf.properties)

      • 13.3.7 Details on the settings in the worker definition file (workers.properties)

      • 13.3.8 Details on the settings in the display color settings file (ajs3web_color.conf)

      • 13.3.9 Details on the settings in the option definition file for J2EE server (usrconf.cfg)

      • 13.3.10 Web browser settings

    • 13.4 Setting up the system and user environments

      • 13.4.1 Setting the language environment

      • 13.4.2 Changing the login scripts

      • 13.4.3 Tuning kernel parameters

      • 13.4.4 Extending trace log files

      • 13.4.5 Specifying communication environment settings

      • 13.4.6 Settings for communication using IPv6 addresses

    • 13.5 Required setup for upgrading

      • 13.5.1 Settings for enhancing the embedded database management function

      • 13.5.2 Settings for reducing the data area usage in the embedded database

  • 14. Environment Settings

    • 14.1 Execution agent settings

      • 14.1.1 Procedure for specifying execution agent settings

    • 14.2 Environment setting parameter settings

      • 14.2.1 Procedure for setting the environment setting parameters by using the jajs_config command

      • 14.2.2 Procedure for setting the environment setting parameters by using the jbssetcnf command

  • 15. Specifying Settings Based on the Usage of JP1/AJS3

    • 15.1 Settings for controlling the scheduler

      • 15.1.1 Settings for starting multiple scheduler services

      • 15.1.2 Changing the level of messages output from scheduler services to the integrated trace log

      • 15.1.3 Changing the method for outputting the schedule rule when outputting nested-jobnet definition parameters

      • 15.1.4 Changing the name of a scheduler trace log file

      • 15.1.5 Setting to output a scheduler trace log per scheduler service

      • 15.1.6 Enabling the suspend function

      • 15.1.7 Changing the mode in which unregistration or generation management deletes the generations of a jobnet

      • 15.1.8 Settings for using wait conditions

      • 15.1.9 Settings for using the temporary change operation management function

      • 15.1.10 Setting for changing the number of characters specifiable for a unit name in a UTF-8 environment

      • 15.1.11 Settings for preventing scheduler services for which the user does not have access permission from appearing in JP1/AJS3 - View

      • 15.1.12 Settings for restricting the maximum number of allowed concurrent sessions for scheduler services

      • 15.1.13 Setting to reduce the number of ports used for internal communications by the scheduler service at job execution

    • 15.2 Settings for controlling job execution

      • 15.2.1 Defining variables for work paths used during job execution

      • 15.2.2 Defining search paths for a file to be transferred

      • 15.2.3 Customizing the execution agent or agent attribute values created by the automatic agent definition function

      • 15.2.4 Checking the messages output at the same time by a job to the standard output and standard error output

      • 15.2.5 Changing the interval and number of resend attempts for job result files

      • 15.2.6 Preventing duplicated reception of job result files

      • 15.2.7 Placing restrictions on file reception

      • 15.2.8 Changing the timeout period, interval of retries, and number of retries for TCP/IP connections

      • 15.2.9 Setting the method for determining the agent host to which a job will be delivered

      • 15.2.10 Setting the action to be taken if the value of a macro variable cannot be passed

      • 15.2.11 Setting the handling of a macro variable when the value is a NULL string

      • 15.2.12 Changing the wait time for recovery when an agent has failed

      • 15.2.13 Outputting a message that reports that the maximum number of concurrently executable jobs has been reached

      • 15.2.14 Changing the timeout value for the job execution control manager process

      • 15.2.15 Changing the timeout value for pipe communication of the agent

      • 15.2.16 Setting the timeout value for receiving notification from the job process that execution is ready

      • 15.2.17 Applying SIG_DFL (setting for receiving the SIGCHLD signal) to a child process started from JP1/AJS3

      • 15.2.18 Enabling the file access permission check for the ACL and secondary group settings during job execution

      • 15.2.19 Placing all running jobs in an end status when a communication error occurs

      • 15.2.20 Changing the settings for retries when user information is acquired

      • 15.2.21 Settings for re-executing the dependent units

      • 15.2.22 Operation settings when job result file transfer fails

      • 15.2.23 Settings for using the return value of the preceding job in the passing information setting jobs

      • 15.2.24 Placing restrictions on file transmission

      • 15.2.25 Setting to increase the maximum number of execution agents that can be registered in a manager host

    • 15.3 Changing the settings related to event/action control

      • 15.3.1 Changing the settings related to the size of the log for event jobs to match operational requirements

      • 15.3.2 Setting the event order option

      • 15.3.3 Setting the status passing option for the file monitoring job

      • 15.3.4 Passing event data containing double quotation marks

      • 15.3.5 Using fully qualified domain names (FQDN) when using event jobs during DNS operation

      • 15.3.6 Resuming event jobs that stopped when the JP1/AJS3 service stopped

      • 15.3.7 Retrying startup notification of the event/action control agent

      • 15.3.8 Setting the agent host name resolution option

      • 15.3.9 Applying a timeout for receiving data in inter-process communication by event/action control

      • 15.3.10 Setting the period of time for monitoring event jobs in the blocked status

      • 15.3.11 Setting the binding method applied to the outgoing communication used in the execution of event jobs

      • 15.3.12 Settings for ensuring that the sending of unreported information is retried at regular intervals

      • 15.3.13 Changing the send retry interval and the number of retries for sending unreported information

      • 15.3.14 Setting the connection timeout for communication between the event/action control manager and agent

      • 15.3.15 Environment setting parameters related to communication for event/action control

      • 15.3.16 Settings for ensuring that a fixed manager host name is used when event jobs are executed

      • 15.3.17 Setting the event server name in the system using DNS

      • 15.3.18 How to set the option for changing the agent information to be used for name resolution

    • 15.4 Changing the settings related to queueless job execution control

      • 15.4.1 Executing jobs with a class specified in a queueless job environment

    • 15.5 Changing the settings related to the definition pre-check function

      • 15.5.1 Setting up the JP1/AJS3 definition pre-check function

    • 15.6 Settings common to all control processes

      • 15.6.1 Settings for outputting error messages for jobs to syslog

    • 15.7 Other settings

      • 15.7.1 Setting automatic startup and termination of the JP1/AJS3 service

      • 15.7.2 Changing the JP1/AJS3 database configuration to the standard configuration without ISAM

      • 15.7.3 Settings for permitting changing JP1 user passwords in JP1/AJS3 - View

  • 16. Collecting Log Data

    • 16.1 Collecting log data

      • 16.1.1 Setting up the data collection tools

      • 16.1.2 Note on the output setting of core file

  • 17. Setup for Operation in a Cluster System

    • 17.1 Installation and setup required for cluster system operation

      • 17.1.1 Installation required for cluster system operation

      • 17.1.2 Setup required for cluster system operation

    • 17.2 Setting up the operating environment for cluster system operation

      • 17.2.1 Environment setup items for a cluster system

      • 17.2.2 Procedure for setting up a cluster system environment (in UNIX version of JP1/AJS3 - Manager)

      • 17.2.3 Procedure for setting up a cluster system environment (in UNIX version of JP1/AJS3 - Agent)

      • 17.2.4 Procedure for setting up a cluster system environment (in Linux version of JP1/AJS3 - Web Console)

      • 17.2.5 Changing the common definition information

      • 17.2.6 Registering the JP1/AJS3 service in the cluster software

      • 17.2.7 Setting up the queueless job execution environment

      • 17.2.8 Deleting logical hosts

      • 17.2.9 Setting startup of multiple scheduler services on a logical host

      • 17.2.10 Specifying the settings that control startup and termination of JP1/AJS3 in a logical host environment

    • 17.3 Notes on cluster operation

  • 18. Setup Required for Disaster Recovery Operation

    • 18.1 Overview of the setup required for disaster recovery operation

      • 18.1.1 Overview of the setup required for disaster recovery operation (when using different names for the main-site and remote-site logical hosts)

      • 18.1.2 Overview of the setup required for disaster recovery operation (when using the same name for the main-site and remote-site logical hosts)

    • 18.2 Setting up the main site and remote site

      • 18.2.1 Setting up the main site when using different names for the main-site and remote-site logical hosts

      • 18.2.2 Setting up the main site when using the same name for the main-site and remote-site logical hosts

      • 18.2.3 Setting up the remote site

    • 18.3 Setting up JP1/AJS3 - Agent

  • 19. Uninstallation

    • 19.1 Uninstalling JP1/Base

    • 19.2 Uninstalling JP1/AJS3 series programs

      • 19.2.1 Uninstallation in HP-UX

      • 19.2.2 Uninstallation in Solaris

      • 19.2.3 Uninstallation in AIX

      • 19.2.4 Uninstallation in Linux

• Part 3: Environment Setting Parameters

  • 20. Environment Setting Parameters

    • 20.1 Customization of environment setting parameters

    • 20.2 Format of the environment setting parameters

      • 20.2.1 Format of the definition keys

      • 20.2.2 Format of the environment setting parameters

    • 20.3 Setting up the system management environment

      • 20.3.1 List of environment setting parameters for the system management

      • 20.3.2 Details of the environment setting parameters for the system management

    • 20.4 Setting up the scheduler service environment

      • 20.4.1 List of environment setting parameters for the scheduler service environment

      • 20.4.2 Details of the environment setting parameters for scheduler services

    • 20.5 Setting up the job execution environment

      • 20.5.1 List of the environment setting parameters for the job execution environment

      • 20.5.2 Details of the environment setting parameters for the job execution environment

    • 20.6 Setting up the event/action control environment

      • 20.6.1 List of environment setting parameters for event/action control

      • 20.6.2 Details of the environment setting parameters for event/action control

    • 20.7 Setting for the JP1/AJS3 definition pre-check function

      • 20.7.1 List of environment setting parameters for the JP1/AJS3 definition pre-check function

      • 20.7.2 Details of the environment setting parameters for the JP1/AJS3 definition pre-check function

    • 20.8 Setting up the communication control environment

      • 20.8.1 List of environment setting parameters for communication control

      • 20.8.2 Details of the environment setting parameters for communication control

    • 20.9 Setting up the flexible-job execution environment

      • 20.9.1 List of environment setting parameters for the flexible-job execution environment

      • 20.9.2 Details of the environment setting parameters for the flexible-job execution environment

    • 20.10 Setting up the queueless job execution environment

      • 20.10.1 List of environment setting parameters for the queueless job execution environment

      • 20.10.2 Details of the environment setting parameters for the queueless job execution environment

    • 20.11 Setting up JP1/AJS3 shared information

      • 20.11.1 List of the environment setting parameters for JP1/AJS3 shared information

      • 20.11.2 Details of the environment setting parameters for JP1/AJS3 shared information

    • 20.12 Environment settings for monitoring agents

      • 20.12.1 List of the environment setting parameters for monitoring agents

      • 20.12.2 Details of the environment setting parameters for monitoring agents

• Part 4: Setup Based on Operations

  • 21. Setup of Functions Based on Operation Methods

    • 21.1 Setting up functions by using operation profiles

      • 21.1.1 Setting execution agent restrictions

      • 21.1.2 Details of execution agent profile

      • 21.1.3 Setting up the upper-level unit-attribute inheritance function and execution-user fixing function

      • 21.1.4 Details of unit-attribute profile

      • 21.1.5 Cautionary notes on operation profiles

    • 21.2 Restricting connections to JP1/AJS3

      • 21.2.1 Setting the procedure for restricting connections to JP1/AJS3

      • 21.2.2 How to set the connection permission configuration file

    • 21.3 Setup to execute flexible jobs

      • 21.3.1 Setup procedure to distribute a job by using a load balancer

      • 21.3.2 Setup procedure to execute a job by broadcast execution

    • 21.4 Setting up the communication using SSL

      • 21.4.1 JP1/AJS3 system configuration and SSL communication setup procedure

      • 21.4.2 SSL communication setup procedure (in a manager/agent configuration)

      • 21.4.3 SSL communication setup procedure (when different server certificates are used for manager host and Web Console server)

      • 21.4.4 SSL communication setup procedure (when the server certificate for Web Console server is used for manager host)

      • 21.4.5 SSL communication setup procedure (when the server certificate for manager host is used for Web Console server)

      • 21.4.6 Details on the settings in the unencrypted-communication host settings file (nosslhost.conf)

    • 21.5 Setting up the job distribution delay reduction function

      • 21.5.1 Procedure to enable the job distribution delay reduction function

      • 21.5.2 Procedure to disable the job distribution delay reduction function

  • 22. Replicating a Virtual Machine on which JP1/AJS3 Is Installed and Set Up

    • 22.1 Replicating a virtual machine after installation of JP1/AJS3 - Manager

      • 22.1.1 Overview of replicating a virtual machine after installation of JP1/AJS3 - Manager

      • 22.1.2 Procedure for replicating a virtual machine after installing JP1/AJS3 - Manager (on the original VM)

      • 22.1.3 Procedure for replicating a virtual machine after setup of JP1/AJS3 - Manager (on the replicated VM)

    • 22.2 Replicating a virtual machine after setup of JP1/AJS3 - Manager

      • 22.2.1 Overview of replicating a virtual machine after setup of JP1/AJS3 - Manager

      • 22.2.2 Procedure for replicating a virtual machine after setting up JP1/AJS3 - Manager (on the original VM)

      • 22.2.3 Procedure for replicating a virtual machine after setup of JP1/AJS3 - Manager (on the replicated VM)

    • 22.3 Replicating a virtual machine after installation of JP1/AJS3 - Agent

      • 22.3.1 Overview of replicating a virtual machine after installation of JP1/AJS3 - Agent

      • 22.3.2 Procedure for replicating a virtual machine after installing JP1/AJS3 - Agent (on the original VM)

      • 22.3.3 Procedure for replicating a virtual machine after installation of JP1/AJS3 - Agent (on the replicated VM)

    • 22.4 Replicating a virtual machine after setup of JP1/AJS3 - Agent

      • 22.4.1 Overview of replicating a virtual machine after setup of JP1/AJS3 - Agent

      • 22.4.2 Procedure for replicating a virtual machine after setting up JP1/AJS3 - Agent (on the original VM)

      • 22.4.3 Procedure for replicating a virtual machine after setup of JP1/AJS3 - Agent (on the replicated VM)

  • 23. Setting Up an Embedded Database

    • 23.1 Preparation for using an embedded database

      • 23.1.1 Examining the embedded-database operating environment and operating method

    • 23.2 Estimating the database area

    • 23.3 Maintaining an embedded database

    • 23.4 Advanced setup of an embedded database

      • 23.4.1 Setting up an embedded database

    • 23.5 Advanced setup for the embedded database (in a cluster configuration)

      • 23.5.1 Advanced setting up an embedded database (on the primary node)

      • 23.5.2 Advanced setting up an embedded database (on the secondary node)

      • 23.5.3 Changing the settings of an embedded database in a cluster configuration

• Appendixes

  • A. Checking the Installation and Setup

    • A.1 Installation and setup checklists (Windows host)

    • A.2 Installation and setup checklists (UNIX host)

  • B. Recovery Procedure Used When an Incorrect Environment Settings Parameter is Set

    • B.1 For Windows

    • B.2 For UNIX

  • C. Values Recommended for the Environment Settings Set in JP1/AJS3

    • C.1 Environment setting parameters for which recommended values were updated in version 08-00

    • C.2 Environment setting parameters whose defaults were changed to recommended values in version 11-00

  • D. Installation and Setup for Operation by AJS Administrators (UNIX only)

    • D.1 Workflow for setting an AJS administrator

    • D.2 Preparing to set an AJS administrator

    • D.3 Setting the JP1 administrators group

    • D.4 Setting the AJS administrator

    • D.5 Access Permissions for Directories and Files Specified in Environment Setting Parameters Required for AJS Administrators to Perform Operations

  • E. Commands to Obtain Certificates for SSL Communication

    • E.1 Creating a private key

    • E.2 Creating a Certificate Signing Request (CSR)

    • E.3 Displaying the contents of a Certificate Signing Request (CSR)

    • E.4 Displaying certificate contents

    • E.5 Converting the certificate format

  • F. Version Revisions

    • F.1 Revisions in 11-50

    • F.2 Revisions in 11-10

    • F.3 Revisions in 11-00

    • F.4 Revisions in 10-50

    • F.5 Revisions in 10-10

    • F.6 Revisions in 10-00

    • F.7 Revisions in 09-00

  • G. Reference Material for This Manual

    • G.1 Related publications

    • G.2 Conventions: Abbreviations for product names

    • G.3 Conventions: Acronyms

    • G.4 Conventions: Diagrams

    • G.5 Conventions: Fonts and symbols

    • G.6 Conventions: KB, MB, GB, and TB

    • G.7 Conventions: Meaning of "directory" and "folder"

    • G.8 Conventions: Version numbers

    • G.9 About administrator privileges

    • G.10 About the Start menu in Windows

    • G.11 Default installation folders of JP1/AJS3 for Windows

    • G.12 Online manual

    • G.13 Regular expressions available in JP1/AJS3

    • G.14 About the 3rd level and 4th level Kanji characters added in JIS 2004 (JIS X 0213:2004)

    • G.15 About NNM linkage

  • H. Glossary

• Index

To Page Top