UDP Version 6 Overview (PI_UDP6)
- Organization of this page
Function
The UDP Version 6 Overview (PI_UDP6) record stores the performance data per unit time on the rate at which UDP Datagram was sent/received when the UDP protocol of Internet Protocol Version 6 was used, and the number of various types of UDP errors.
Default values and values that can be specified
Item |
Default value |
Modifiable |
---|---|---|
Collection Interval |
60 |
Yes |
Collection Offset# |
0 |
Yes |
Log |
No |
Yes |
LOGIF |
Blank |
Yes |
Over 10 Sec Collection Time |
No |
No |
Realtime Report Data Collection Mode |
Reschedule |
Yes |
- #
-
A value between 0 and 32,767 seconds can be specified (a value within the range specified for Collection Interval). Use this item to distribute the collection load, because executing data collection all at once results in concentration of the processing workload. Note that the data collection duration to be recorded is the same as the Collection Interval, regardless of the value specified for Collection Offset.
ODBC key fields
None
Lifetime
None
Record size
-
Fixed portion: 761 bytes
-
Variable portion: 0 bytes
Fields
PFM-View name (PFM - Manager name name) |
Description |
Smry |
Format |
Delta |
Not sprtd on |
Data source |
---|---|---|---|---|---|---|
Datagrams No Port/sec (DATAGRAMS_NO_PORT_PER_SEC) |
Rate at which UDP Datagrams for which no application exists at the destination port were received (Datagrams/second) |
AVG |
float |
No |
-- |
-- |
Datagrams Rcvd Errors (DATAGRAMS_RECEIVED_ERRORS) |
Number of received UDP Datagrams that could not be delivered for reasons other than the absence of application at the destination port following the OS startup# |
AVG |
ulong |
No |
-- |
-- |
Datagrams Rcvd/sec (DATAGRAMS_RECEIVED_PER_SEC) |
Rate at which UDP Datagrams were delivered to UDP users (Datagrams/second) |
AVG |
float |
No |
-- |
-- |
Datagrams Sent/sec (DATAGRAMS_SENT_PER_SEC) |
Rate at which UDP Datagrams were sent by entities (Datagrams/second) |
AVG |
float |
No |
-- |
-- |
Datagrams/sec (DATAGRAMS_PER_SEC) |
Rate at which UDP Datagrams were sent/received by entities (Datagrams/second) |
AVG |
float |
No |
-- |
-- |
Interval (INTERVAL) |
Collection interval time in which records were stored (in seconds). For a real-time report, the first value is 5. If records are summarized into a historical report, the total of the summarized records is displayed. |
ADD |
ulong |
No |
-- |
RECORD_TIME (T1) - RECORD_TIME (T0) |
Record Time (RECORD_TIME) |
Time at which the record was created |
COPY |
time_t |
No |
-- |
-- |
Record Type (INPUT_RECORD_TYPE) |
Record name. Always UDP6. |
COPY |
char (8) |
No |
-- |
-- |