Pages/sec
- Organization of this page
Overview
The Pages/sec alarm monitors the rate of paging for the pages per second when page faults occurred. If the rate of paging for the pages continues to be at or above the threshold, memory might be a system bottleneck. However, if the threshold is only temporarily exceeded, the maximum allowable value being monitored might be 20.
Primary settings
|
PFM - Web Console alarm property |
Settings |
|
|---|---|---|
|
Item |
Detailed item |
|
|
Main Information |
Product |
Windows |
|
Alarm message |
Page Faults = %CVS1 |
|
|
Enable alarm |
Selected |
|
|
Alarm notification |
Notify when the state changed |
|
|
Notification target |
State changes for the alarm |
|
|
Evaluate all data |
Do not specify. |
|
|
Monitoring time range |
Always monitor |
|
|
Report alarm when the following damping condition is reached. |
Selected |
|
|
occurrence(s) during |
2 |
|
|
interval(s) |
3 |
|
|
Alarm Conditions |
Record |
System Overview (PI) |
|
Field |
Pages/sec |
|
|
Abnormal condition |
Pages/sec >= 5# |
|
|
Warning condition |
Pages/sec >= 4# |
|
|
Actions |
|
-- |
|
Command |
-- |
|
|
SNMP |
Abnormal, Warning, Normal |
|
- Legend:
-
--: Setting is always invalid.
- #
-
Change the value as necessary for the environment.
Alarm table
PFM Windows Template Alarms [MEM] 09.00
Related reports
Reports/Windows/Operating System/Troubleshooting/Real-Time/System Overview