The Pages/sec alarm monitors the rate of paging for the pages per second when page faults occurred. If the rate of paging for the pages continues to be at or above the threshold, memory might be a system bottleneck. However, if the threshold is only temporarily exceeded, the maximum allowable value being monitored might be 20.

PFM - Web Console alarm property		Settings
Item	Detailed item
Main Information	Product	Windows
	Alarm message	Page Faults = %CVS1
	Enable alarm	Yes
	Monitoring time range	Evaluate regularly
	Evaluate all data	No
	Report alarm when the following damping condition is reached.	Yes
	interval(s)	3
	occurrence(s) during	2
Action	Email	--
	Command	--
	SNMP	Abnormal, Warning, Normal
Alarm Conditions	Record	System Overview (PI)
	Field	Pages/sec
	Abnormal condition	Pages/sec >= 5#
	Warning condition	Pages/sec >= 4#

Legend:

--: Setting is always invalid.

#

Change the value as necessary for the environment.

PFM Windows Template Alarms [MEM] 09.00

Reports/Windows/Operating System/Troubleshooting/Real-Time/System Overview