I.4 Monitoring template (report)
- Organization of this subsection
-
(1) Format of report explanations
Reports are listed in alphabetical order.
- Report name
-
Shows the name of the report in the monitoring template.
- Synopsis
-
Provides a summary of the information that can be viewed in the report.
- Location
-
Shows the location of the report.
- Records
-
Shows the type of performance data records on which the report is based. Before you can display a historical report, you must set up the Performance Management to collect the records indicated here. Before displaying the report, display the agent properties in the Agents page of PFM - Web Console, and make sure that Log = Yes is set for these records. This setting is not required for the records in a real-time report.
- Fields
-
Shows a table of the fields used in the report.
- Drilldown reports (field level)
-
Shows a table of the reports in the monitoring template that are associated with the fields in the report. You can display these drilldown reports by clicking a graph, list, or table in the View Report window of PFM - Web Console. By displaying a drilldown report from a time item in a historical report, you can narrow down the time period of the data in the report. Only some reports have drilldown reports.
For details about drilldown reports, see the chapter that explains creation of reports for operation analysis in the Job Management Partner 1/Performance Management User's Guide.
(2) Organization of report folders
The health check agent report folders are organized as follows. The items in angle brackets are folder names.
<HealthCheck> +-- <Monthly Trend> +-- System Summary (4.0) +-- Hosts Availability (4.0) +-- <Drilldown Only> +-- Host Availability (4.0) +-- <Status Reporting> +-- System Overview (Historical) +-- System Overview (Status Change) +-- System Summary (4.0) +-- Hosts Availability (4.0) +-- <Drilldown Only> +-- Host Availability (4.0) +-- <Troubleshooting> +-- <Real-Time> +-- System Overview (Real-Time) +-- Hosts Status (Real-Time) (4.0) +-- <Drilldown Only> +-- Agent Detail (Real-Time) +-- +-- <Recent Past> +-- System Overview (Historical) +-- System Overview (Status Change) +-- <Drilldown Only> +-- Agent Detail (Historical) +-- Agent Overview (Historical) +-- Agent Overview (Status Change)
The folder contents are as follows.
-
Status Reporting folder
Folder for reports with data aggregated every day or week, used for surveying general system trends.
-
Troubleshooting folder
Folder for reports with troubleshooting data, used for identifying the cause of problems that occur in the system.
-
Real-Time folder
Folder for real-time reports used to check the current system status.
-
Recent Past folder
Folder for historical reports with data aggregated for each minute of the past hour.
-
These folders might contain some of the following subfolders. Which of these folders appears depends on the parent folder. The subfolders are as follows:
-
Advanced folder
Folder for reports that use records for which the default setting of Log = No is set in the agent properties. To display the reports in this folder, you need to set Log = Yes for these records in PFM - Web Console.
-
Drilldown Only folder
Folder for reports displayed as drilldown report (field level) reports. These reports are used to display detailed information about fields in the parent report.
(3) List of reports
The following table lists the reports defined in the monitoring template in alphabetical order.
Report name |
Displayed information |
---|---|
Detailed health check results |
|
Detailed health check results |
|
Summary of health check results |
|
Summary of health check results |
|
Information such as running time and rate of hosts that make up the system (drilldown report) |
|
Information such as running time and rate of hosts that make up the system |
|
Operating status of hosts that make up the system |
|
Summary of health check results |
|
Summary of health check results |
|
Summary of health check results |
|
Operating status of hosts that make up the system |
(4) System Overview (Historical)
- Synopsis
-
The System Overview (Historical) report displays an overview of the health check results. You can use this report to check the operating status of each agent in table format, or view a line graph that shows how the status of each agent has changed over time. Because higher numerical values in the graph represent higher severity levels, you can visually check the source of any problems that might occur. By drilling down to another report, you can concentrate on a specific agent or host, or switch to a detailed report that describes the operating status of a specific agent.
- Location
-
Reports/HealthCheck/Status Reporting
Reports/HealthCheck/Troubleshooting/Recent Past
- Records
-
Health Check Detail (PD_HC)
- Fields
-
Field name
Description
Polling Date and Time
Polling time
Agent
PFM - Agent or PFM - RM name
Host
PFM - Agent or PFM - RM host name
Agent Op Status
Operating status of the agent
Message Text
Detailed information about the agent operating status
- Drilldown reports (report level)
-
System Overview (Status Change)
- Drilldown reports (field level)
-
Report name
Description
Agent Overview (Historical)
Shows the operating status of the selected agent in detail. Display this report by clicking the Agent or Host field.
Agent Detail (Historical)
Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status or Agent Op Status by Num field.
(5) System Overview (Real-Time)
- Outline
-
The System Overview (Real-Time) report displays an overview of the latest health check results. You can use this report to check the operating status of each agent in table format, or drill down to a detailed report that describes the operating status of a specific agent.
- Location
-
Reports/HealthCheck/Troubleshooting/Real-Time
- Records
-
Health Check Detail (PD_HC)
- Field
-
Field name
Description
Polling Date and Time
Polling time
Agent
PFM - Agent or PFM - RM name
Host
PFM - Agent or PFM - RM host name
Agent Op Status
Operating status of the agent
Message Text
Detailed information about the agent operating status
- Drilldown reports (field level)
-
Report name
Description
Agent Detail (Real-Time)
Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status field.
(6) System Overview (Status Change)
- Synopsis
-
The System Overview (Status Change) report displays an overview of the health check results. The information in this report is the same as the System Overview (Historical) report, with the exception that the System Overview (Status Change) report only displays fields that have changed. It does not contain a graph. By drilling down to another report, you can concentrate on a specific agent or host, or switch to a detailed report that describes the operating status of a specific agent.
- Location
-
Reports/HealthCheck/Status Reporting
Reports/HealthCheck/Troubleshooting/Recent Past
- Records
-
Health Check Detail (PD_HC)
- Fields
-
Field name
Description
Polling Date and Time
Polling time
Agent
PFM - Agent or PFM - RM name
Host
PFM - Agent or PFM - RM host name
Agent Op Status
Operating status of the agent
Message Text
Detailed information about the agent operating status
- Drilldown reports (report level)
-
System Overview (Historical)
- Drilldown reports (field level)
-
Report name
Description
Agent Overview (Status Change)
Shows the operating status of the selected agent in detail. Display this report by clicking the Agent or Host field.
Agent Detail (Historical)
Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status field.
(7) System Summary (4.0)
- Outline
-
The System Summary (4.0) report shows the operating status of hosts that make up the system, based on the results of the health check. You can use this report to confirm the operating status of each host in table format, or view a line graph that shows how the total number of hosts and the number of running hosts has changed over time.
- Note
-
Depending on when a host starts or stops operating, the number of operating hosts might have changed, even if Num of Available Hosts (Max) and Num of Available Hosts (Min) have not changed.
- Location
-
Reports/HealthCheck/Monthly Trend
Reports/HealthCheck/Status Reporting
- Records
-
System Overview (PI_SYS)
- Field
-
Field name
Description
Num of Hosts (Max)
Total number of hosts in the system (maximum)
Num of Available Hosts (Max)
Total number of running hosts in the system (maximum)
Num of Available Hosts (Min)
Total number of running hosts in the system (minimum)
% Available Hosts
Running rate of hosts (%) in the system
(8) Agent Overview (Historical)
- Synopsis
-
The Agent Overview (Historical) report displays an overview of the health check results. You can use this report to check the operating status of each agent in table format, or view a line graph that shows how the status of each agent has changed over time. Because higher numerical values in the graph represent higher severity levels, you can visually check the source of any problems that might occur. You can also drill down to a detailed report that describes the operating status of a specific agent.
- Location
-
Reports/HealthCheck/Troubleshooting/Recent Past/Drilldown Only
- Records
-
Health Check Detail (PD_HC)
- Fields
-
Field name
Description
Polling Date and Time
Polling time
Agent
PFM - Agent or PFM - RM name
Host
PFM - Agent or PFM - RM host name
Agent Op Status
Operating status of the agent
Message Text
Detailed information about the agent operating status
- Drilldown reports (field level)
-
Report name
Description
Agent Detail (Historical)
Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status or Agent Op Status by Num field.
(9) Agent Overview (Status Change)
- Synopsis
-
The Agent Overview (Status Change) report displays an overview of the health check results. The information in this report is the same as the Agent Overview (Historical) report, with the exception that the Agent Overview (Status Change) report only displays fields that have changed. It does not contain a graph. You can also drill down from this report to a detailed report that describes the operating status of a specific agent. This report is available as a drilldown report from the System Overview (Status Change) report.
- Location
-
Reports/HealthCheck/Troubleshooting/Recent Past/Drilldown Only
- Records
-
Health Check Detail (PD_HC)
- Fields
-
Field name
Description
Polling Date and Time
Polling time
Agent
PFM - Agent or PFM - RM name
Host
PFM - Agent or PFM - RM host name
Agent Op Status
Operating status of the agent
Message Text
Detailed information about the agent operating status
- Drilldown reports (field level)
-
Report name
Description
Agent Detail (Historical)
Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status field.
(10) Host Availability (4.0)
- Outline
-
The Host Availability (4.0) report shows information such as the running time and rate of hosts that make up the system, based on the results of the health check. You can use this report to confirm the operating status of each host in table format, or view a line graph that shows how the running rate of each host has changed over time. This report is available as a drilldown report from the Hosts Availability (4.0) report.
- Location
-
Reports/HealthCheck/Monthly Trend/Drilldown Only
Reports/HealthCheck/Status Reporting/Drilldown Only
- Records
-
Host Availability (PI_HAVL)
- Field
-
Field name
Description
Host
Host name
Availability
Running rate (%)
Total Available Time
Running time within the monitoring time (seconds)
Total Monitoring Time
Monitoring time (second)
(11) Hosts Availability (4.0)
- Outline
-
The Hosts Availability (4.0) report shows information such as the available time and availability of hosts that make up the system, based on the results of the health check. You can use this report to confirm the operating status of each host in table format, or view a line graph that shows how the running rate of each host has changed over time. You can drilldown to concentrate on a detailed report for a specific host.
- Location
-
Reports/HealthCheck/Monthly Trend
Reports/HealthCheck/Status Reporting
- Records
-
Host Availability (PI_HAVL)
- Field
-
Field name
Description
Host
Host name
Availability
Running rate (%)
Total Available Time
Running time within the monitoring time (second)
Total Monitoring Time
Monitoring time (second)
- Drilldown reports (field level)
-
Report name
Description
Host Availability (4.0)
Shows such information as the running time and running rate of each host constituting the system, based on the results of the health check. To display this report, click the Host field.
(12) Hosts Status (Real-Time) (4.0)
- Outline
-
The Hosts Status (Real-Time) (4.0) report displays the health check result, consolidating the hosts that make up the system.
- Location
-
Reports/HealthCheck/Troubleshooting/Real-Time
- Records
-
Host Detail (PD_HOST)
- Field
-
Field name
Description
Polling Date and Time
Date and time of polling
Host
Host name
Status
Host status
(13) Agent Detail (Historical)
- Synopsis
-
The Agent Detail (Historical) report displays detailed health check results. This report displays the detailed operating status of agents in list format. You can use this report to view detailed information about a specific agent.
This report is available as a drilldown report from the System Overview (Historical / Status Change) and Agent Overview (Historical / Status Change) reports.
- Location
-
Reports/HealthCheck/Troubleshooting/Recent Past/Drilldown Only
- Records
-
Health Check Detail (PD_HC)
- Fields
-
Field name
Description
Polling Date and Time
Polling time
Agent
PFM - Agent or PFM - RM name
Host
PFM - Agent or PFM - RM host name
Agent Op Status
Operating status of the agent
Collector Op Status
Operating status of Agent Collector and Remote Monitor Collector services
Collector Op Status Last-Updated
Time when the operating status of Agent Collector and Remote Monitor Collector services were last updated
Store Op Status
Operating status of Agent Store and Remote Monitor Store services
Store Op Status Last-Updated
Time when the operating status of Agent Store and Remote Monitor Store services were last updated
AH Op Status
Operating status of the Action Handler service
AH Op Status Last-Updated
Time when the operating status of the Action Handler service was last updated
Message Text
Detailed information about the agent operating status
(14) Agent Detail (Real-Time)
- Synopsis
-
The Agent Detail (Real-Time) report displays detailed health check results. This report displays the detailed operating status of agents in list format. You can use this report to view detailed information about a specific agent. This report is available as a drilldown report from the System Overview (Real-Time) report.
- Location
-
Reports/HealthCheck/Troubleshooting/Real-Time/Drilldown Only
- Records
-
Health Check Detail (PD_HC)
- Fields
-
Field name
Description
Polling Date and Time
Polling time
Agent
PFM - Agent or PFM - RM name
Host
PFM - Agent or PFM - RM host name
Agent Op Status
Operating status of the agent
Collector Op Status
Operating status of Agent Collector and Remote Monitor Collector services
Collector Op Status Last-Updated
Time when the operating status of Agent Collector and Remote Monitor Collector services was last updated
Store Op Status
Operating status of Agent Store and Remote Monitor Store services
Store Op Status Last-Updated
Time when the operating status of Agent Store and Remote Monitor Store services was last updated
AH Op Status
Operating status of the Action Handler service
AH Op Status Last-Updated
Time when the operating status of the Action Handler service was last updated
Message Text
Detailed information about the agent operating status