4.9.2 Commands used to operate the system
- Organization of this subsection
(1) Service management commands
Performance Management provides commands to check the status of services.
Command |
Description |
---|---|
Checks the structure and status of the Performance Management services |
|
Deletes the Performance Management service information |
|
Re-registers the Performance Management service information |
|
Synchronizes the service information registered in PFM - Manager and PFM - Web Console |
(2) Alarm management commands
Alarm management commands include a command to set the alarm events issued when the monitored program exceeds a threshold.
Command |
Description |
---|---|
Sets alarms for Performance Management |
(3) Report management commands
Report management commands include a command to create operation monitoring reports based on the data collected from the monitored program.
Command |
Description |
---|---|
Sets reports for Performance Management |
|
Performs batch-output of operation reports to a CSV or HTML file |
(4) Store database management commands
Store database management commands include commands used to perform setup and unsetup operations for the Store database.
Command |
Description |
---|---|
Backs up data |
|
Deletes data |
|
Outputs the collected performance data to a text file |
|
Restores data |
|
Imports backup data into the Store database (when using Store 2.0) |
|
Upgrades the data model of the backup data in the specified backup directory (when using Store 2.0) |
|
Changes and outputs the definitions of the Store database recording methods |
|
Changes and outputs the definitions of the Store database retention conditions |
(5) Data collection commands
Data collection commands include commands used to collect the necessary data together when problems occur.
Command |
Description |
---|---|
Collects the troubleshooting data for PFM - Manager, PFM - Agent, PFM - RM, and PFM - Base |
|
Collects the troubleshooting data for PFM - Web Console |
(6) Commands used to operate the system linking with other systems
Commands used to operate the system linking with other systems include a command used to enable or disable the linkage facility to JP1/IM.
Command |
Description |
---|---|
Sends events registered in JP1/IM |