2.11.3 Procedure for creating a group resource on the primary server
After JP1/IT Desktop Management has been installed, use Microsoft Cluster Service or Windows Server Failover Cluster to create a JP1/IT Desktop Management group and register resources. To register resources:
-
Create a management server group.
Create a group for the management server that is separate from any cluster groups that are already registered in Microsoft Cluster Service or Windows Server Failover Cluster.
-
Register the resources that are necessary for the group you created.
The table below lists the resources that must be registered in the group.Note that the resources that must be registered differ depending on the server configuration.
For single-server configuration systems:
Resource type
Resource name
Resources other than JP1/IT Desktop Management service resources
IP address resource
Network name resource
Shared disk (physical disk) resource
JP1/IT Desktop Management service resources (generic services)
JP1_ITDM_DB Service
JP1_ITDM_DB Cluster Service
JP1_ITDM_Web Container#
JP1_ITDM_Web Server
JP1_ITDM_Service
JP1_ITDM_Agent Control
- #: If the OS is Windows Server 2012 or Windows Server 2008, you must create resources from the CLI. Before you can create resources, make sure that you log on as a member of the Administrators group. To create a resource, execute the following command from the command prompt:
-
cluster res "name-of-a-JP1_ITDM_Web-Server-service-resource" /priv StartupParameters=""
For multi-server configuration systems:
Resource type
Resource name
Registration required
Management server
Database server
Resources other than JP1/IT Desktop Management service resources
IP address resource
Y
Y
Network name resource
Y
Y
Shared disk (physical disk) resource
--
Y
JP1/IT Desktop Management service resources (generic services)
JP1_ITDM_DB Service
--
Y
JP1_ITDM_DB Cluster Service
--
Y
JP1_ITDM_Web Container
Y
--
JP1_ITDM_Web Server
Y
--
JP1_ITDM_Service
Y
Y
JP1_ITDM_Agent Control
Y
--
Legend: Y: Resource that must be registered, --: Resource that does not need to be registered
-
Set the primary server as the priority server.
-
Bring the resources other than JP1/IT Desktop Management service resources online.
The JP1/IT Desktop Management service resources (generic services) remain offline.
The group resource is created.
For details about how to create a group resource, see the documentation for Microsoft Cluster Service or Windows Server Failover Cluster.
The setting items and the setting values for each resource are as follows.
Settings for resources other than JP1/IT Desktop Management service resources
Resource name |
Setting item |
Setting value |
---|---|---|
|
Failover threshold |
1 (recommended) |
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM_DB Service settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM_DB Service |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
Set the network name resource and the shared disk (physical disk) resource. |
|
Service name |
Set HiRDBEmbeddedEdition_JE1. |
|
Registry copy |
Not specified. |
|
Failover threshold |
0 (fixed) |
|
Failover period (in seconds) |
0 (fixed) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM_DB Cluster Service settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM_DB Cluster Service |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
Set a resource for JP1_ITDM_DB Service. |
|
Service name |
Set HiRDBClusterService_JE1. |
|
Registry copy |
Not specified. |
|
Failover threshold |
1 (recommended) |
|
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM_Web Container settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM_Web Container |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
For a single-server configuration system, set the JP1_ITDM_DB Cluster Service resource. For a multi-server configuration system, set the network name and physical disk resources. |
|
Service name |
Set JP1_DTNAVI_WEBCON. |
|
Registry copy |
Not specified. |
|
Failover threshold |
1 (recommended) |
|
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM_Web Server settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM_Web Server |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
Set the network name resource. |
|
Service name |
Set JP1_DTNAVI_WEBSVR. |
|
Registry copy |
Not specified. |
|
Failover threshold |
1 (recommended) |
|
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM_Service settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM_Service |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
For a single-server configuration system, or a database server in a multi-server configuration system, set the JP1_ITDM_DB Cluster Service resource. For a management server in a multi-server configuration system, set the network name and physical disk resources. |
|
Service name |
Set JP1_DTNAVI_MGRSRV. |
|
Registry copy |
Not specified. |
|
Failover threshold |
1 (recommended) |
|
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |
JP1_ITDM_Agent Control settings
Resource name |
Setting item |
Setting value |
---|---|---|
JP1_ITDM_Agent Control |
Name |
Specify a name. |
Resource type |
Set a generic service. |
|
Group |
Set the group name of a management server. |
|
Possible owner |
Set both the primary and standby servers. |
|
Dependency |
For a single-server configuration system, set the JP1_ITDM_DB Cluster Service resource. For a multi-server configuration system, set the network name and physical disk resources. |
|
Service name |
Set JP1_DTNAVI_AGCTRL. |
|
Registry copy |
Not specified. |
|
Failover threshold |
1 (recommended) |
|
Failover period (in seconds) |
900 (recommended) |
|
Wait timeout (in seconds) |
300 (recommended) |