3.4 Register DH Custom Job

This section describes the procedure of registration DH Custom Job to JP1/AJS3 - View.

JP1/DH - AJE (Job Execution) varies in contents to register by the OS.

In Windows

On Management client, you should register DH Custom Job to JP1/AJS3 - View.

If there are some Management clients, you should register DH Custom Job to each Management clients.

The procedure of registration of DH Custom Job is as follows:

1. Display the [Register Custom Jobs] dialog box by following steps.

   • Select [All Program] from Windows [Start] menu.

   • Select [JP1_Automatic Job Management System 3 - View].

   • Select [Register Custom Jobs].

2. Click [Add] button of the [Register Custom Jobs] dialog box.

   [Set Properties of Custom Job] dialog box is displayed.

3. Specify following information to the each setting items of the [Set Properties of Custom Job] dialog box.

   Table 3‒7: Setting items of [Set Properties of Custom Jobs] dialog box (In Windows)

   Definition items	Values
   Name	Enter the Custom Job name "DHAJEW". Or, You can enter any name of up to 8 bytes.
   comment	Enter any comment up to 40 bytes. This value is the default name of new Custom Jobs. If you don't specify "comment", The value of "Name" is the default name of new Custom Jobs.
   Definition program	Specify the execution file name of JP1/DH - AJE (Job Definition) with an absolute path. The execution file exists on the Management client. For example: <Installation folder of JP1/DH - AJE (Job Definition) t on the Management client>\bin\dhajed.exe
   Execution program	Specify the execution file name of JP1/DH - AJE (Job Execution) with an absolute path. The execution file exists on the Send/Receive Client. For example: <Installation folder of JP1/DH - AJE (Job Execution) on the Send/Receive Client>\bin\dhajee.exe
   Version	Specify "0600".
   Class name	Specify "DHAJEW"
   Job type	Chooses the [PC Job].

   Supplementary note: If you uses JP1/DH - AJE (Job Execution) on the following status: A) You installed JP1/DH - AJE (Job Execution) into some Send/Receive clients. B) The install destination folder of JP1/DH - AJE (Job Execution) are different on each hosts. You should use "Environment setting parameter". "Environment setting parameter" is a function of JP1/AJS3. In this case, you should specify [{JP1_DEFAULT|logical-host}\JP1NBQAGENT\Variable] to "Execution program". For more details, see the section "Defining variables for work paths used during job execution" of the manual "Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1"

   Note: You should use the values in the above table as version, class name and job type. If you change them, the icon of Custom Job of JP1/DH - AJE may not be displayed on the [Jobnet Editor] window of JP1/AJS3 - View. You should register the Custom Job of JP1/DH - AJE for Windows only one thing. If you register the Custom Job two or more, Custom Job may not be executed by inconsistent.

4. Click [OK] button.

5. If the version of JP1/AJS3 - view is less than 10-00, you should copy the icon file for Windows from the install destination folder of JP1/DH - AJE to the storage folder of Custom Job images of JP1/AJS3 - view. If the version of JP1/AJS3 - view is 10-00 or later, you can skip this step.

   • The icon file of DH Custom Job

   <Install destination folder of JP1/DH - AJE (Job Definition)\custom\CUSTOM_PC_DHAJEW.gif

   • The storage folder of Custom Job images of JP1/AJS3 - View

   <Install destination folder of JP1/AJS3 - View>\image\custom

6. Check the Custom Job of JP1/DH - AJE which you registered.

   Displays the [Jobnet Editor] window of JP1/AJS3 - View and select the Custom Job tab of the icon list. Check the icon [] of the Custom Job is displayed.

In Linux

On Management client, you should register DH Custom Job to JP1/AJS3 - View.

If there are some Management clients, you should register DH Custom Job to each Management clients.

The procedure of registration of DH Custom Job is as follows:

1. Display the [Register Custom Jobs] dialog box by following steps.

   • Select [All Program] from Windows [Start] menu.

   • Select [JP1_Automatic Job Management System 3 - View].

   • Select [Register Custom Jobs].

2. Click [Add] button of the [Register Custom Jobs] dialog box.

   [Set Properties of Custom Job] dialog box is displayed.

3. Specify following information to the each setting items of the [Set Properties of Custom Job] dialog box.

   Table 3‒8: Setting items of [Set Properties of Custom Jobs] dialog box (In Linux)

   Definition items	Values
   Name	Enter the Custom Job name "DHAJEL". Or, You can enter any name of up to 8 bytes.
   comment	Enter any comment up to 40 bytes. This value is the default name of new Custom Jobs. If you don't specify "comment", The value of "Name" is the default name of new Custom Jobs.
   Definition program	Specify the execution file name of JP1/DH - AJE (Job Definition) with an absolute path. The execution file exists on the Management client. For example: <Installation folder of JP1/DH - AJE (Job Definition) t on the Management client>\bin\dhajed.exe
   Execution program	Specify the execution file name of JP1/DH - AJE (Job Execution) with an absolute path. The execution file exists on the Send/Receive Client. /opt/jp1dh/aje/ajee/bin/dhajee.sh
   Version	Specify "0600".
   Class name	Specify "DHAJEL".
   Job type	Chooses the [PC Job].

   Note: You should use the values in the above table as version, class name and job type. If you change them, the icon of Custom Job of JP1/DH - AJE may not be displayed on the [Jobnet Editor] window of JP1/AJS3 - View. You should register the Custom Job of JP1/DH - AJE for Linux only one thing. If you register the Custom Job two or more, Custom Job may not be executed by inconsistent.

4. Click [OK] button.

5. If the version of JP1/AJS3 - view is less than 10-00, you should copy the icon file for Linux from the install destination folder of JP1/DH - AJE to the storage folder of Custom Job images of JP1/AJS3 - view. If the version of JP1/AJS3 - view is 10-00 or later, you can skip this step.

   • The icon file of DH Custom Job

   <Install destination folder of JP1/DH - AJE (Job Definition)\custom\CUSTOM_PC_DHAJEL.gif

   • The storage folder of Custom Job images of JP1/AJS3 - View

   <Install destination folder of JP1/AJS3 - View>\image\custom

6. Check the Custom Job of JP1/DH - AJE which you registered.

   Displays the [Jobnet Editor] window of JP1/AJS3 - View and select the Custom Job tab of the icon list. Check the icon [] of the Custom Job is displayed.

To Page Top