15.9.4 Monitor Details - [icon-name] dialog box

The Monitor Details - [icon-name] dialog box displays detailed information on the status and results of the execution for the selected unit (except jobnets, remote jobnets, and jobnet connectors). For details about the Monitor Details - [Jobnet] dialog box, the Monitor Details - [Remote Jobnet] dialog box, and Monitor Details - [Jobnet Connector] dialog box, see 15.3.38 Monitor Details - [Jobnet] dialog box.

The following figure shows the Monitor Details - [icon-name] dialog box.

Figure 15‒206: Monitor Details - [icon-name] dialog box

The following explains the displayed items.

Unit name

Displays the full name of a unit.

Status

Displays the status of the unit.

Change plan

Displays whether any plan in the unit has been changed temporarily.

Hold

Displays whether to hold the execution of the unit.

The displayed information differs depending on the hold setting. The following table lists the character strings that can be displayed and the corresponding hold settings.

Table 15‒55: Hold statuses displayed in the Monitor Details - [`icon-name`] dialog box and their corresponding hold settings
Status	Hold setting
Follow the definition. (Hold)	Yes is selected for Hold in the Define Details - [`icon-name`] dialog box.
Follow the definition. (Do not hold)	No is selected for Hold in the Define Details - [`icon-name`] dialog box.
Yes	From the Operations menu, Change Hold Attribute is selected, and then Hold is selected.
None	From the Operations menu, Change Hold Attribute is selected, and then Hold-Release is selected.

Start time

Displays the start time of the execution of the unit.

End time

Displays the end time of the execution of the unit.

Delay status

Displays the delay status of the unit.

Time when end delayed

Displays the date and time from which to start monitoring of delayed end.

Monitoring of delayed end based on time required for execution starts after the specified number of days and hours from the start time. Therefore, the date and time from which to start detecting an end delay is determined when a job starts to be executed.

End delayed

Displays whether end delay has occurred.

Time when job registered

Displays the time when the job was registered for execution.

Job number

Displays a job number.

Return code

Displays a job return code. For details about the return code of a job, see 7.8.3 Checking the return code of a job in the Job Management Partner 1/Automatic Job Management System 3 System Design (Work Tasks) Guide.

Target host

Displays the name of the host in which the unit was executed actually.

Waiting

If the unit has wait conditions, this field shows whether the wait conditions are satisfied.

If there are any conditions waiting to be satisfied:

Displays Yes.
If there are no conditions waiting to be satisfied:

Displays None.

This field shows a hyphen if any of the following apply:

The unit has no wait conditions
The connection target is JP1/AJS2 - Manager or a version of JP1/AJS3 - Manager earlier than 09-50
The JP1/AJS3 - Manager database uses the compatible ISAM configuration

Retry status

The following is displayed for Unix jobs, PC jobs, Queue jobs, standard custom jobs, custom PC jobs, and custom Unix jobs:

When automatic retry is enabled

Displays retry waiting, retry executing, or retry end. If the job has never been retried, None is displayed.
When automatic retry is disabled

Displays None.

For the following units, a hyphen (-) is displayed:

Units other than the above types
Units whose connection-target JP1/AJS3 - Manager version is earlier than 10-00
Units for which the JP1/AJS3 - Manager database is a compatible ISAM configuration

This item does not appear if either of the following applies:

The version of JP1/AJS3 - View is earlier than 10-00
The unit is a root jobnet, nested jobnet, root remote jobnet, nested remote jobnet, or jobnet connector

Retry execution times

The following is displayed for Unix jobs, PC jobs, Queue jobs, standard custom jobs, custom PC jobs, and custom Unix jobs:

When automatic retry is enabled

Displays the number of times the job has been retried. If the job has never been retried, 0 is displayed.
When automatic retry is disabled

Displays 0.

For the following units, a hyphen (-) is displayed:

Units other than the above types
Units whose connection-target JP1/AJS3 - Manager version is earlier than 10-00
Units for which the JP1/AJS3 - Manager database is a compatible ISAM configuration

This item does not appear if either of the following applies:

The version of JP1/AJS3 - View is earlier than 10-00
The unit is a root jobnet, nested jobnet, root remote jobnet, nested remote jobnet, or jobnet connector

Retry start time

The following is displayed for Unix jobs, PC jobs, Queue jobs, standard custom jobs, custom PC jobs, and custom Unix jobs:

When automatic retry is enabled

Displays the date and time when the job last entered Now running status as a result of an automatic retry, in the format YYYY/MM/DD hh:mm:ss. If the job has never been retried, None is displayed.
When automatic retry is disabled

Displays None.

For the following units, a hyphen (-) is displayed:

Units other than the above types
Units whose connection-target JP1/AJS3 - Manager version is earlier than 10-00
Units for which the JP1/AJS3 - Manager database is a compatible ISAM configuration

This item does not appear if either of the following applies:

The version of JP1/AJS3 - View is earlier than 10-00
The unit is a root jobnet, nested jobnet, root remote jobnet, nested remote jobnet, or jobnet connector

Retry registration time

The following is displayed for Unix jobs, PC jobs, Queue jobs, standard custom jobs, custom PC jobs, and custom Unix jobs:

When automatic retry is enabled

Displays the date and time when the job last entered Waiting to execute status as a result of an automatic retry, in the format YYYY/MM/DD hh:mm:ss. If the job has never been retried, None is displayed.
When automatic retry is disabled

Displays None.

For the following units, a hyphen (-) is displayed:

Units other than the above types
Units whose connection-target JP1/AJS3 - Manager version is earlier than 10-00
Units for which the JP1/AJS3 - Manager database is a compatible ISAM configuration

This item does not appear if either of the following applies:

The version of JP1/AJS3 - View is earlier than 10-00
The unit is a root jobnet, nested jobnet, root remote jobnet, nested remote jobnet, or jobnet connector

Execution result details

If you click Details button, the Execution Result Details dialog box appears.

For more information, see 15.3.39 Execution Result Details dialog box.

Start button

Launches an external program to check the execution status of a custom job.

To display the Start button, you need to enter a setting in the custom job extended settings file. For details, see 11.7.16 Setting whether the Start button is displayed in the Monitor Details dialog box and which external program it launches.

Supplementary notes

The external program is subject to the permissions of the OS user who started JP1/AJS3 - View on the JP1/AJS3 - View host.
JP1/AJS3 - View does not wait for the external program to finish executing.
Clicking the Start button multiple times launches the external program an equivalent number of times.
The external program must not output to standard output or standard error output.

Edit Def button

Displays the Define Details - [icon-name] dialog box that defines the details of the unit. For details, see 15.3 JP1/AJS3 - View window or 15.4 Jobnet Editor window.

To Page Top