Job Management Partner 1 Version 10, Job Management Partner 1/Automatic Job Management System 3 Operator's Guide
The Daily Schedule window supports two display modes:
The details about the items displayed in each window are described below.
Figure 15-185 Daily Schedule [Hierarchy] window
The following explains the displayed items.
Displays the jobnets or jobs under the root jobnet in a tree structure. The units under the remote jobnet, and the manager jobnet are not displayed.
For a release target jobnet, the jobnet is displayed in the root-jobnet-name(release-ID) format for each definition for which release entry is performed. Note that the release ID is not displayed if the release ID is AJS_AUTO.
The unit names are displayed in the order specified by the Schedule page in the Preferences dialog box. In the Schedule page of the Preferences dialog box, you can also specify whether to view a root jobnet that has no schedule information. For details, see 15.3.42 Preferences dialog box.
Use one of these buttons to change the date of the currently displayed schedule information. The following buttons are available:
Click this button to cancel the display update processing.
The upper row displays a date, while the lower row displays hours. The system also displays a selection frame. The value of hours is shown according to what has been selected by the Schedule page in the Preferences dialog box. For details, see 15.3.42 Preferences dialog box.
Displays cells indicating execution schedules, and a selection frame. Both edges of each cell indicate the start time and the end time, respectively. They indicate schedule time if the job is not executed.
If delay occurs, the upper and lower lines of the cell are displayed thick.
The gray background in the schedule area indicates the past, and the white background indicates the present and future.
The color of each cell indicates the status of job or jobnet execution. The following table lists the status of job or jobnet execution and the colors of cells.
Table 15-39 Cell colors and job or jobnet execution status
No. | Job execution status | Color |
---|---|---|
1 | Not registered | None |
2 | Wait for start time | Sky blue |
3 | Wait for prev. to end | Sky blue |
4 | Being held | Yellow |
5 | Waiting to execute | Sky blue |
6 | Not sched. to exe. | Gray |
7 | Now queuing | Sky blue |
8 | Now running | Green |
9 | Running + Warning | Red |
10 | Running + Abend | Red |
11 | Ended normally | Light green |
12 | Ended with warning | Light red |
13 | Ended abnormally | Light red |
14 | Bypassed | Gray |
15 | Not executed + Ended (not scheduled) | Gray |
16 | Not executed + Ended (scheduled) | Gray |
17 | Interrupted | Light red |
18 | Killed | Light red |
19 | Invalid exe. seq. | Light red |
20 | Skipped so not exe. (not scheduled) | Gray |
21 | Skipped so not exe. (scheduled) | Gray |
22 | Failed to start | Light red |
23 | Unknown end status | Light red |
24 | Shutdown | Brown |
25 | Now monitoring | Green |
26 | Wait for start cond. | Sky blue |
27 | Unmonitored + Ended | Gray |
28 | Monitor-end normal | Light green |
29 | Monitor terminated | Light red |
30 | Interrupted monitoring | Light green |
31 | Normal end + False | Light green |
32 | Start delay | Pink |
33 | Start delay + Running | Dark pink |
34 | End delay | Orange |
35 | End delay + Running | Dark orange |
You can use the Preferences dialog box to change the cell colors. For details, see 15.3.42 Preferences dialog box.
When a job is configured to retry automatically, no distinction is made between ordinary execution schedules and those initiated by the automatic retry feature. The entire schedule from the initial execution of the job until the retried job ends occupies one cell.
Select an execution schedule in hour units. The selection frame encloses the period from 30 minutes before to 30 minutes after the click position.
Lists only the execution schedules set in the tree area and selection frame and having target IDs (that the Jobnet Monitor window can display). When you click an execution schedule in the list, the contents of the tree area and schedule area will be refreshed to reflect the selected schedule information.
You can change the items displayed in the list area and the display order. For details on how to set the displayed items, see 15.3.46 Display Item Setup dialog box.
The horizontal sizes of the displayed items are saved when you close the window or you changed the displayed items.
The following figure shows the Daily Schedule [All Jobs] window.
Figure 15-186 Daily Schedule [All Jobs] window
The following explains the displayed items.
Displays only the jobs under a job group or jobnet having schedule information to be displayed.
If a job is under a release target jobnet, the job is displayed in the job-name(release-ID) format for each definition for which release entry is performed. Note that the release ID is not displayed if the release ID is AJS_AUTO.
The name is displayed in the format of job-name:relative-path. The jobs under start conditions are not displayed.
The job names are displayed in the order specified by the Schedule page in the Preferences dialog box. For details, see 15.3.42 Preferences dialog box.
Use one of these buttons to change the date of the currently displayed schedule information. The following buttons are available:
Click this button to cancel the display update processing.
The upper row displays a date, while the lower row displays hours. The system also displays a selection frame.
The value of hours is shown according to what has been selected by the Schedule page in the Preferences dialog box. For details, see 15.3.42 Preferences dialog box.
Displays cells indicating execution schedules, and a selection frame. Both edges of each cell indicate the start time and the end time, respectively. They indicate schedule time if the job is not executed.
If delay occurs, the upper and lower lines of the cell are displayed thick.
The gray background in the schedule area indicates the past, and the white background indicates the present and future.
The square color indicates the status of job execution. For details about cell colors and status of job execution, see Table 15-39.
You can use the Preferences dialog box to change the cell colors. For details, see 15.3.42 Preferences dialog box.
When a job is configured to retry automatically, no distinction is made between ordinary execution schedules and those initiated by the automatic retry feature. The entire schedule from the initial execution of the job until the retried job ends occupies one cell.
Select an execution schedule in hour units. The selection frame encloses the period from 30 minutes before to 30 minutes after the click position.
Lists only the execution schedules set in the tree area and selection frame and having target IDs (that the Jobnet Monitor window can display). When you click an execution schedule in the list, the contents of the tree area and schedule area will be refreshed to reflect the selected schedule information. For details about the displayed items, see the description of the execution result list in 15.7.1(1) Daily Schedule [Hierarchy] window.
Copyright (C) 2012, Hitachi, Ltd.
Copyright (C) 2012, Hitachi Solutions, Ltd.