The Set Default Values dialog box allows you to perform the following:

• Change default values in dialog boxes
• Prohibit change of specific definition items in the Define Details dialog boxes
• Prohibit displaying unit icons in icon list if they are not used in the Jobnet Editor window

The following figures show a case where a definition item is selected in the tree area in the Set Default Values dialog box and a case where an icon name is selected in the Set Default Values dialog box.

Figure 15-81 Set Default Values dialog box (when a definition item is selected)

Figure 15-82 Set Default Values dialog box (when an icon name is selected)

The following explains the displayed items.

Tree area

Lists the customizable dialog boxes and the settings for each dialog box in a hierarchical format. The following table lists the items for which you can change default values.

Note that the name enclosed between angle brackets (< >) in the Dialog box name column indicates the name of a dialog box shown in the tree area in the Set Default Values dialog box.

Table 15-26 Items whose defaults you can customize

Dialog box name	Setting item
Define Details (for all units)#1 <Define Details - common>	Delayed end - Time-required-for-execution
	Executed by
Define Details - [Job Group]	Specify base day
	Week (week)
	Week (day of the week)
	Treat as
	Set base time
Define Details - [Jobnet] (for a root jobnet) <Define Details - Root Jobnet>	Concurrent exec.
	No. logs to keep
	Priority
	Time-out period
	Schedule option
	Monitor jobnet - Time-required-for-execution
	Exec. order control#2, #3
	Connection range#2, #4
	Exec. order method#2, #3
	Hold
Define Details - [Jobnet] (for a nested jobnet) <Define Details - Jobnet>	Monitor jobnet - Time-required-for-execution
Define Details - [Remote Jobnet] (for a root jobnet) <Define Details - Root Remote Jobnet>	Concurrent exec.
	No. logs to keep
	Priority
	Time-out period
	Schedule option
	Monitor jobnet - Time-required-for-execution
	Hold
Define Details - [Remote Jobnet] (for a nested jobnet) <Define Details - Remote Jobnet>	Monitor jobnet - Time-required-for-execution
Define Details - [Planning Group]	Specify base day
	Week (week)
	Week (day of the week)
	Treat as
	Set base time
	Exec. order control#3
	Connection range#4
	Exec. order method#3
Define Details - [Start Condition]	Start Condition
	Concurrent exec. of monitoring gen.
	Pause exec. gen. for start cond.
	Task after abend
Define Details - [UNIX Job]	Priority
	End judgment - Rule
	Retry on abnormal end
	Exec. Service
	Set timeout period
	Delayed end - Time-required-for-execution
	Executed by
Define Details - [PC Job]	Priority
	End judgment - Rule
	Retry on abnormal end
	Exec. Service
	Set timeout period
	Delayed end - Time-required-for-execution
	Executed by
Define Details - [Queue Job]	Priority
	End judgment - Rule
	Retry on abnormal end
	Delayed end - Time-required-for-execution
	Executed by
Define Details - [Jobnet Connector]	Connection range#4
Define Details - [Judgment Job]	Judgment type
	Condition (Return code)
	Condition (File)
	Condition (Variable (char.))
	Condition (Variable (number))
	Judgment value (range specification) - Lower limit
	Judgment value (range specification) - Upper limit
Detailed Definition (for all event jobs)#1 <Detailed Definition - All Event Jobs>	Set timeout period
	Status after close
Detailed Definition - [Receive JP1 Event]	End judgment
	Find event before exec.
	Set timeout period
	Status after close
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Monitoring Files]	Set timeout period
	Status after close
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Receive Mail]	Platform
	Set timeout period
	Status after close
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Receive MQ Message]	Set timeout period
	Status after close
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Receive MSMQ Message]	Set timeout period
	Status after close
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Monitoring Log Files]	Set timeout period
	Status after close
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Monitoring Event Log]	Set timeout period
	Status after close
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Interval Control]	Expire right after starting
	Set timeout period
	Status after close
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition (for all action jobs)#1 <Detailed Definition - All Action Jobs>	Platform
	Exec. Service
	Set timeout period
Detailed Definition - [Send JP1 Event]	Check event arrivals
	Platform
	Exec. Service
	Set timeout period
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Send Mail]	Platform
	Exec. Service
	Set timeout period
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Send MQ Message]	Platform
	Exec. Service
	Set timeout period
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Send MSMQ Message]	Exec. Service
	Set timeout period
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [OpenView Status Report]	Platform
	Exec. Service
	Set timeout period
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Local Power Control]	Platform
	Exec. Service
	Set timeout period
	Delayed end - Time-required-for-execution
	Executed by
Detailed Definition - [Remote Power Control]	Platform
	Exec. Service
	Set timeout period
	Delayed end - Time-required-for-execution
	Executed by
Define Details - [Custom Job] <Define Details - Custom Job (PC)> or <Define Details - Custom Job (UNIX)>	Delayed end - Time-required-for-execution
	Executed by
Define Details - [Passing Information Settings Job]	Set timeout period
	Delayed end - Time-required-for-execution
	Executed by
Register for Execution	Register method
	Planned execution - Planned time passed when daemon starts
	Planned execution - Planned time passed when reg. for exe.
	Fixed execution - Planned time passed when daemon starts
	Immediate execution - Start condition
	Immediate execution - Valid range of start condition (Times)
	Immediate execution - Valid range of start condition (Period)
Shift Schedule Date and Time	Start time
	When schedule is pushed ahead:
	Change schedule of all lower jobnets
Immediate Execution	When schedule is pushed ahead:
	Change date and time of all lower jobnets
Rerun dialog box (for root jobnets)	Rerun with hold
	Set skipped jobs to warning
Rerun dialog box (for a nested jobnet or job)	Rerun with hold
	Set skipped jobs to warning
Waiting Condition Settings <Waiting - Wait Conditions Settings>	Wait method#5
	If not waiting for any generations#5
	When Unmonitored + Ended#5
	Abnormal end for an execution generation#5
	Start when skipped so not exe.#5, #6

#1

If you specify the same item in the Common dialog box and other dialog boxes, the item set later becomes valid.

#2

When you create a unit under a planning group, the specified default value will be invalid because this definition item is disabled and not available for change in the Define Details dialog box.

#3

When you create a unit when you connect to a JP1/AJS2 - Manager of version 08-00 or earlier, the specified default value will be invalid because this definition item is disabled and not available for change in the Define Details dialog box.

#4

When you create a unit when you connect to a JP1/AJS2 - Manager of version 08-10 or earlier, the specified default value will be invalid because this definition item is disabled and not available for change in the Define Details dialog box.

The following table lists the items for which you can disable permission for changes.

#5

You can only change this item if no wait conditions are defined. You are considered not to have defined a wait condition when:

- You have not assigned a wait condition to the unit since creating it

- In the Waiting Condition Settings dialog box, you delete a wait condition setting by clicking OK without setting a unit whose end is to be waited for

#6

This item is inactive in the Waiting Condition Settings dialog box if Execute is set as the default value for Abnormal end for an execution generation.

The following table lists the items for which you can disable permission for changes.

Table 15-27 Items for which you can disable permission for changes

Dialog box name	Setting item
Define Details - [Job Group]	Specify base day
	Week (week)
	Week (day of the week)
	Treat as
	Set base time
	Owner
	JP1 resource group
Define Details - [Jobnet] (for a root jobnet) <Define Details - Root Jobnet>	Exec-agent#1
	Concurrent exec.
	No. logs to keep
	Priority
	Time-out period
	Schedule option
	Monitoring jobnet - Time-required-for-execution
	Exec. order control#2, #3
	Connection range#2, #4
	Exec. order method#2, #3
	Hold
	Type
	Owner
	JP1 resource group
Define Details - [Jobnet] (for a nested jobnet) <Define Details - Jobnet>	Exec-agent#1
	Priority
	Monitoring jobnet - Time-required-for-execution
	Hold
	Type
	Owner
	JP1 resource group
Define Details - [Remote Jobnet] (for a root remote jobnet) <Define Details - Root Remote Jobnet>	Exec-agent
	Concurrent exec.
	No. logs to keep
	Priority
	Time-out period
	Schedule option
	Monitoring jobnet - Time-required-for-execution
	Hold
	Type
	Owner
	JP1 resource group
Define Details - [Remote Jobnet] (for a nested remote jobnet) <Define Details - Remote Jobnet>	Exec-agent
	Priority
	Monitoring jobnet - Time-required-for-execution
	Hold
	Type
	Owner
	JP1 resource group
Define Details - [Planning Group]	Specify base day
	Week (week)
	Week (day of the week)
	Treat as
	Set base time
	Exec. order control#3
	Connection range#4
	Exec. order method #3
	Owner
	JP1 resource group
Define Details - [Start Condition]	Start condition
	Concurrent exec. of monitoring gen.
	Pause exec. gen. for start cond.
	Task after abend
	Owner
	JP1 resource group
Define Details - [UNIX Job]	Exec-agent#1
	Command statement
	Script file name
	Parameters
	Environment variables
	Environment file
	Working path
	Priority
	Standard input
	Standard output - File name
	Standard output - Append
	Standard error - File name
	Standard error - Append
	End judgment - Rule
	End judgment - Warning#5
	Retry on abnormal end
	User name
	Transfer file 1 - File to transfer#6
	Transfer file 1 - Destination file
	Transfer file 1 - Yes
	Transfer file 2 - File to transfer#6
	Transfer file 2 - Destination file
	Transfer file 2 - Yes
	Transfer file 3 - File to transfer#6
	Transfer file 3 - Destination file
	Transfer file 3 - Yes
	Transfer file 4 - File to transfer#6
	Transfer file 4 - Destination file
	Transfer file 4 - Yes
	Hold
	Type
	Exec. Service
	Set timeout period
	Monitor end delay - Time-required-for-execution
	Owner
	JP1 resource group
	Executed by
Define Details - [PC Job]	Exec-agent#1
	File name
	Parameters
	Environment variables
	Environment file
	Working path
	Priority
	Standard input
	Standard output - File name
	Standard output - Append
	Standard error - File name
	Standard error - Append
	End judgment - Rule
	End judgment - Warning#5
	Retry on abnormal end
	User name
	Transfer file 1 - File to transfer#6
	Transfer file 1 - Destination file
	Transfer file 1 - Yes
	Transfer file 2 - File to transfer#6
	Transfer file 2 - Destination file
	Transfer file 2 - Yes
	Transfer file 3 - File to transfer#6
	Transfer file 3 - Destination file
	Transfer file 3 - Yes
	Transfer file 4 - File to transfer#6
	Transfer file 4 - Destination file
	Transfer file 4 - Yes
	Hold
	Type
	Exec. Service
	Set timeout period
	Monitor end delay - Time-required-for-execution
	Owner
	JP1 resource group
	Executed by
Define Details - [Queue Job]	Host name
	Job name
	File name
	Parameters
	Priority
	End judgment - Rule
	End judgment - Warning#5
	Retry on abnormal end
	Transfer file 1 - File to transfer#6
	Transfer file 1 - Destination file
	Transfer file 2 - File to transfer#6
	Transfer file 2 - Destination file
	Transfer file 3 - File to transfer#6
	Transfer file 3 - Destination file
	Transfer file 4 - File to transfer#6
	Transfer file 4 - Destination file
	Hold
	Type
	Monitor end delay - Time-required-for-execution
	Owner
	JP1 resource group
	Executed by
Define Details - [Jobnet Connector]	Connection range#4
	Owner
	JP1 resource group
Define Details - [OR Job]	Type
	Owner
	JP1 resource group
Define Details - [Judgment Job]	Judgment type
	Condition (Return code)
	Condition (File)
	Condition (Variable (char.))
	Condition (Variable (number))
	Judgment value (range specification) - Lower limit
	Judgment value (range specification) - Upper limit
	Hold
	Type
	Owner
	JP1 resource group
Detailed Definition - [Interval Control]	Expire right after starting
Define Details - [Passing Information Settings Job]	Hold
	Type
	Set timeout period
	Owner
	JP1 resource group

#1

When the Change is not permitted check box is selected for this definition item, if you enter an execution agent that is not permitted in the Exec-agent field of the Define Details dialog box and click OK, the error message KAVV1500-E appears and the definition cannot be changed. In this scenario, either clear the Change is not permitted check box or change the value of ViewCheckLevel in the execution agent profile to warning, and then try again.

#2

When you create a unit under a planning group, the specified default value will be invalid because this definition item is disabled and not available for change in the Define Details dialog box.

#3

When you create a unit when you connect to a JP1/AJS2 - Manager of version 08-00 or earlier, the specified default value will be invalid because this definition item is disabled and not available for change in the Define Details dialog box.

#4

When you create a unit when you connect to a JP1/AJS2 - Manager of version 08-10 or earlier, the specified default value will be invalid because this definition item is disabled and not available for change in the Define Details dialog box.

#5

When you select the Change is not permitted check box for this definition item in the Set Default Values dialog box, the value in Abnormal in End judgment in the Define Details dialog box must be greater than the value in Warning. If you enter a value in Abnormal that is smaller than the value in Warning and click the OK button, an error message appears and the value in Warning is selected. Because the value in Warning cannot be changed, change the value in Abnormal and click the OK button.

#6

When you select the Change is not permitted check box for this definition item in the Set Default Values dialog box, if the File to transfer text box in any of Transfer file 1 to Transfer file 4 in the Define Details dialog box is blank, you cannot enter a value in the Destination file text box. If you enter a value in Destination file and click the OK button without entering a value in the File to transfer text box, an error message appears and File to transfer is selected. However, because the value in File to transfer cannot be changed, delete the value in Destination file and click the OK button.

You can choose not to display the unit icons of the following types of units:

• Receive JP1 Event
• Monitoring Files
• Receive Mail
• Receive MQ Message
• Receive MSMQ Message
• Monitoring Log Files
• Monitoring Event Log
• Interval Control
• Send JP1 Event
• Send Mail
• Send MQ Message
• Send MSMQ Message
• OpenView Status Report
• Local Power Control
• Remote Power Control

Item name

Displays the item name you selected in the tree area.

Browse button

Displays the explanation of the manual for the item you selected in the tree area.

Setting item area

Displays a list of items from the items you selected in the tree area, the default statuses of the items, and other information.

Change is not permitted

This check box appears when you select a definition item in the tree area for which you can choose not to permit change. When you select this check box, the definition item is disabled and not available for change in the Define Details - [icon-name] dialog box. The check box is not selected by default.

The unit is not used

This check box appears when you select a unit in the tree area for which you can choose not to display its unit icon. When you select this check box, the unit icon does not appear in the icon list in the Jobnet Editor window. The check box is not selected by default.