3.1.7 Messages KNAE06000 through KNAE06999
-
KNAE06001-I
Plugin execution finished. ReturnCode:{0}
[Cause]
Execution of the plugin has finished.
[Action]
If return code of the plugin is not zero, please confirm the product manual and error message appeared same time,
0:Return code of plugin
-
KNAE06102-E
You cannot downgrade. A more recent version of {0} is installed. The downgrade will stop.
[Cause]
You cannot downgrade.
[Action]
Verify the product version you are installing.
0:Product Name
-
KNAE06104-E
Specify up to 150 bytes for the installation path.
[Cause]
The installation path is too long.
[Action]
Specify up to 150 bytes for the installation path.
-
KNAE06105-E
The file operation failed.
Check the access permissions for the installation destination, and manually delete the file.
[Cause]
The file operation failed.
[Action]
Check the access permissions for the installation destination and manually delete the file.
-
KNAE06106-W
If you continue the removal, all files and folders under the installation folder will be removed. Do you want to continue?
[Cause]
This is a confirmation message for removing JP1/Automatic Operation.
[Action]
If no problem will occur when you remove all the files and folders under the installation folder, continue the removal.
-
KNAE06200-E
The storage system type could not be obtained. (serialNumber = {0})
[Cause]
Could not get the type of the storage system.
[Action]
Please confirm that the storage system is registered on HDvM.
0:serial number of storage system
-
KNAE06201-E
The canonical name of the LUN could not be obtained. (runtimeName = {0})
[Cause]
Could not get the canonical name of the LUN.
[Action]
Please confirm that the LUN is recognized in VMware vSphere.
0:runtime name of LUN
-
KNAE06202-E
HBA was not found.
[Cause]
HBA was not found.
[Action]
Please confirm that the HBA name is correct.
-
KNAE06203-E
The SCSI LUN path was not found.
[Cause]
A pass of SCSI LUN was not found.
[Action]
Please confirm that the HBA name is correct.
-
KNAE06204-E
The OS type of the virtual server template is not supported. {0}
[Cause]
Guest OS type of template is not supported.
[Action]
Please specify the template with supported OS.
0:OS type of template
-
KNAE06205-E
The OS type could not be obtained from the virtual server template. {0}
[Cause]
OS type can not be obtained from the template.
[Action]
Please specify another template.
0:template Name
-
KNAE06206-E
The same name is specified for two or more virtual servers. {0}
[Cause]
Two or more virtual machines of the same name is existing.
[Action]
Please specify another virtual machine name.
0:virtual machine Name
-
KNAE06207-E
An attempt to establish a connection with the virtual server is taking longer than expected.
[Cause]
Establishment of communication with a virtual server is delayed.
[Action]
Please check a virtual server directly.
-
KNAE06208-E
The specified property is undefined. {0}
[Cause]
The value of the variable for static routes is empty.
[Action]
A static route does not set up. Please set up manually.
0:destIPAddress/Subnetmask/defaultGateway
-
KNAE06209-E
The specified port group was not found on the virtual server. {0}
[Cause]
There is no port group specified on the virtual machine.
[Action]
Please specify the port group which the virtual server (or template) has.
0:port group Name
-
KNAE06210-E
The specified IP address is formatted incorrectly.
[Cause]
The value is not the form of an IP address.
[Action]
Please specify in the form of an IP address.
-
KNAE06211-E
The corresponding network interface was not found.
[Cause]
The corresponding network interface was not found.
[Action]
Please check whether the network interface is set to the virtual machine.
-
KNAE06212-E
Error was occurred while adding a static route (errCode={0})
[Cause]
Error was occurred while adding a static route
[Action]
Please check whether the user has a right to add static route.
0:Return code
-
KNAE06213-E
A file access error occurred. {0} (errCode = {1})
[Cause]
Error was occurred while accessing to the routing file.
[Action]
Please check whether the user has a right to add static route, or whether the disk has enough space.
0:file path of routing file
1:Return code
-
KNAE06214-E
The ping command returned a non-zero value.
[Cause]
ping command returns not Zero
[Action]
Please check whether the target host has started.
0:Return code
-
KNAE06215-E
The virtual server does not have a network adapter. {0}
[Cause]
There is no network adaptor (NIC) in a virtual machine.
[Action]
A port group is not changed.
Please add a network adaptor manually and set up a port group.
0:virtual machine Name
-
KNAE06217-E
The Linux.adminPassword property is mandatory when adding a virtual server in Linux.
[Cause]
Linux.adminPassword is mandatory field for Linux VM addition service.
[Action]
Please specify root password of the deployed Linux machine as Linux.adminPassword field in Service Setting window.
-
KNAE06218-E
The IP address or host name is invalid. Check whether the destination exists. (destination = {0})
[Cause]
The destination IP address or host name for ICMP echo is invalid.
[Action]
Please confirm whether the destination exists.
0:IP address or host name
-
KNAE06219-E
The IP address or host name is invalid. Check the status code of the ICMP echo. (destination = {0}, status code = {1})
[Cause]
The destination IP address or host name for ICMP echo is invalid.
[Action]
Please confirm the StatusCode of ICMP echo.
0:IP address or host name
1:The StatusCode of ICMP echo
-
KNAE06220-E
Shutdown confirmation processing timed out because the shutdown processing took longer than expected.
[Cause]
Because of delay in shutdown of virtual server, the confirmation process for shutdown had been timed out.
[Action]
Please confirm the virtual server status by management tool for virtual environment.
-
KNAE06221-E
Processing to acquire an IP address from the virtual server failed.
[Cause]
NIC is not set to the target virtual server.
The ICMP (ECHO) response is not permitted.
[Action]
Please check whether NIC is set to the target virtual server.
Please check whether the target virtual server has permitted the ICMP (ECHO) response.
-
KNAE06222-E
The power status cannot be obtained from the virtual server.
[Cause]
Power state can not be obtained from virtual server.
[Action]
Please confirm the virtual server status by management tool for virtual environment.
-
KNAE06223-I
The specified program or port number is already registered. ({0})
[Cause]
The program or port number which it was going to register into the exception condition of the firewall show already registered one.
[Action]
Nothing.
0:program or port number
-
KNAE06224-E
The entered passwords do not match.
[Cause]
Specified password in "PasswordReEnter" property does not correspond with the one in "Password" property.
[Action]
Please input a password same as "Password" into "PasswordReEnter".
-
KNAE06225-E
The <html-output> entry in the report definition file is invalid.
[Cause]
The <html-output> of a report definition file is invalid.
[Action]
Please delete the definition of <html-output> from a report definition file.
-
KNAE06226-E
The data read from an Excel or CSV file exceeded the maximum length.
[Cause]
The sum of length of columns at Excel/CSV file is over limit.
[Action]
Please confirm the Excel/CSV files you specifed.
-
KNAE06227-E
Data read from an Excel or CSV file contained invalid characters {0} in line {1}.
[Cause]
The cell of the Excel/CSV file includes illegal character.
[Action]
Please confirm the Excel/CSV files you specifed.
0: field data includes illegal character
1:line number of field data
-
KNAE06228-E
The specified path is not a Windows absolute path.
[Cause]
The specified path is not an absolute pass of Windows.
[Action]
Specify the absolute path of Windows.
-
KNAE06229-E
The specified path is not a Linux absolute path.
[Cause]
The specified path is not an absolute pass of Linux.
[Action]
Specify the absolute path of Linux.
-
KNAE06230-E
A folder with the specified output file name already exists.
[Cause]
The folder of the name same as the specified report output file name exists.
[Action]
Specify an other file name.
-
KNAE06231-E
A directory with the specified output file name already exists.
[Cause]
The directory of the name same as the specified report output file name exists.
[Action]
Specify an other file name.
-
KNAE06232-E
The status of the specified storage system is not the most recent status.
[Cause]
The state of the specified storage system is not the newest.
[Action]
Please update a storage system.
-
KNAE06233-E
The specified value is invalid. {0}:{1}
[Cause]
The specified value is invalid.
[Action]
Please specify another value.
0:Classification of the specified value
1:The specified value
-
KNAE06234-E
The specified value is not registered as an operation target. {0}:{1}
[Cause]
The specified value is not registered into an operational object.
[Action]
Please specify another value.
0:Classification of the specified value
1:The specified value
-
KNAE06235-E
The specified value is already registered. {0}:{1}
[Cause]
The specified value is already registered.
[Action]
Please specify another value.
0:Classification of the specified value
1:The specified value
-
KNAE06236-E
There is not enough free space in {0}.
[Cause]
Availabilities are insufficient.
[Action]
Please specify another value.
The property name which is insufficient of availabilities
-
KNAE06237-E
Multi-byte characters cannot be used.
[Cause]
A multi-byte character was specified in a property.
[Action]
Specify a value not to include a multi-byte character.
-
KNAE06238-E
Two or more objects of the same name exist in the specified environment.:{0}
[Cause]
Two or more objects of the same name exist in the specified environment.
[Action]
Specify an other value. Or change the name of an object.
The object name which already exists
-
KNAE06239-E
The clone cannot be deleted because it is not stopped.:{0}
[Cause]
The power state of this Server is not shutdown
[Action]
Shutdown this clone.
Clone name
-
KNAE06240-E
The source virtual server for cloning is not stopped. Therefore, the clone cannot be created.:{0}
[Cause]
The power state of this Server is not shutdown
[Action]
Shutdown this server.
0:virtual machine Name
-
KNAE06241-E
The specified virtual server is not stopped. virtual server name:{0}
[Cause]
The specified virtual server is not stopped.
[Action]
Please shutdown a virtual server.
0:The specified value
-
KNAE06242-E
The name of the clone to be deleted is the same as the name of the clone-source virtual server.: {0}
[Cause]
The specified clone name must be different with the source virtual server
[Action]
Please set up a mutually different names of a sourec virtual server and clone.
Clone name
-
KNAE06243-E
The host name cannot be identified from the specified IP address.
[Cause]
The host name cannot be obtained from the specified IP address.
[Action]
Please confirm the hosts file.
-
KNAE06244-E
The specified CPU limit is too low.
[Cause]
The CPU limit must be at least 100 MHz or more.
[Action]
Check the CPU limit you specified and revise if necessary.
-
KNAE06245-E
The CPU reservation must be lower than the CPU limit.
[Cause]
You cannot reserve CPU resources that exceed the limit.
[Action]
Check the resource limits you specified or the resources you want to reserve and revise if necessary.
-
KNAE06246-E
The specified memory limit is too low.
[Cause]
The memory limit must be at least 100 MB or more.
[Action]
Check the memory limit you specified and revise if necessary.
-
KNAE06247-E
The memory reservation must be lower than the memory limit.
[Cause]
You cannot reserve memory resources that exceed the limit.
[Action]
Check the resource limit you specified or the resources you want to reserve and revise if necessary.
-
KNAE06248-I
A plugin will be skipped. plugin name : {0}
[Cause]
The property required to run the plugin was not specified.
0: Plugin name
-
KNAE06249-E
The disk share level is not specified, but the virtual disk was specified.
[Cause]
The virtual disk name was specified, but the disk share level was not specified.
[Action]
Check the property if you want to change the disk share level and revise if necessary.
-
KNAE06250-E
The CPU reservation must be lower than the system CPU limit. CPU limit : {0}
[Cause]
You cannot reserve CPU resources that exceed the CPU limit set for the virtual server.
[Action]
Check the resources you want to reserve or the CPU limit set for the virtual server and revise if necessary.
0: System CPU limit
-
KNAE06251-E
The memory reservation must be lower than the system memory limit. memory limit : {0}
[Cause]
You cannot reserve memory resources that exceed the memory limit set for the virtual server.
[Action]
Confirm the resources you want to reserve or the memory limit set for the virtual server and revise if necessary.
0: System memory limit
-
KNAE06252-E
Resource configuration failed. A possible cause is that the memory specified for the reservation exceeds the virtual server's total memory.
[Cause]
Failed to configure the resources. The potential cause of the failure is as follows: The memory specified to be reserved exceeds the total memory of the virtual server.
[Action]
Check the resources you want to reserve and revise if necessary, or increase the amount of memory assigned to the virtual server.
-
KNAE06253-E
The format of the specified property is incorrect. property : {0}
[Cause]
The format of the specified property is invalid.
[Action]
Check the property value you specified and revise if necessary.
0: Property value
-
KNAE06254-E
Mutually exclusive properties are specified. properties : {0}, {1}
[Cause]
Mutually exclusive properties are specified.
[Action]
Check the properties and revise if necessary.
0: Property value
1: Property value
-
KNAE06255-E
One or more properties that must be specified together are missing : {0}
[Cause]
One or more properties that must be specified together are missing.
[Action]
Check the properties and revise if necessary.
0: Plugin property name list
-
KNAE06256-E
The specified file was not found. file name : {0}
[Cause]
The specified file was not found.
[Action]
Check the file path and revise if necessary.
0: File name
-
KNAE06257-E
The file name extension of the specified file is not "xls", "xlsm", "xlsx", or "csv". extension : {0}
[Cause]
The specified file extension is not "xls", "xlsm", "xlsx", or "csv".
[Action]
Specify a file for which the extension is "xls", "xlsm", "xlsx", or "csv".
0: File extension
-
KNAE06258-E
No sheet name is specified for the Excel file.
[Cause]
The sheet name is not specified for the specified Excel file.
[Action]
Specify the sheet name for the Excel file.
-
KNAE06259-E
The specified column number is not within the number of columns in the specified file. column number : {0}
[Cause]
The specified column number does not fall within the number of columns in the specified file.
[Action]
Specify a column number that falls within the number of columns in the specified file.
0: File column number
-
KNAE06260-E
The data that was read from line {0} in the Excel or CSV file is invalid. ({1})
[Cause]
The data that was read from line {0} in the Excel or CSV file is invalid. (Cause)
[Action]
Check the Excel or CSV file you specified and revise if necessary.
0: Information about the line containing invalid data (such as the line number or key value)
1: Cause (one of the following):
- Exceeded the maximum length (1024)
- The last character is "\"
- Control letter
- Illegal character (one of the following: ",< >|;&,""")
-
KNAE06261-E
The number of rows in the data read from an Excel or CSV file exceeds the maximum.
[Cause]
The number of rows in the data read from an Excel or CSV file exceeds the maximum.
[Action]
Check the Excel or CSV file you specified and revise if necessary.
-
KNAE06262-E
The specified key value did not match any rows.
[Cause]
The specified key value did not match any of the rows.
[Action]
Specify another condition.
-
KNAE06263-E
Hyper-V is not installed.
[Cause]
Hyper-V is not installed.
[Action]
Check the Hyper-V server host name you specified and revise if necessary.
-
KNAE06264-E
The service status is not "Running". {0} : {1}
[Cause]
The service status is not "Running".
[Action]
Check whether the service has been started.
0: Service name
1: Service status
-
KNAE06265-E
The specified virtual server is not registered on the Hyper-V server. virtual server name : {0}
[Cause]
The specified virtual server is not registered on the Hyper-V server.
[Action]
Check the virtual server name and revise if necessary.
0: Virtual server name
-
KNAE06266-E
The specified number is not within the specifiable range ({0}). {1} : {2}
[Cause]
The specified number does not fall within the specifiable range.
[Action]
Specify a number within the specifiable range.
0: Specifiable range
1: Property
2: Specified property number
-
KNAE06267-E
The specified value is not within the specifiable range ({0}). {1} : {2}
[Cause]
The specified value is not within the specifiable range.
[Action]
Specify a value within the specifiable range.
0: Specifiable range
1: Property
2: Specified property value
-
KNAE06268-E
The specified SCSI controller is not registered. SCSI controller number : {0}
[Cause]
The specified SCSI controller is not registered.
[Action]
Check the SCSI controller number you specified and revise if necessary.
0: SCSI controller number
-
KNAE06269-E
The location assigned to the specified SCSI controller is already in use. SCSI controller location number : {0}
[Cause]
The specified SCSI controller location is already being used.
[Action]
Check the SCSI controller location number you specified and revise if necessary.
0: SCSI controller location number
-
KNAE06270-E
A file with the same name as the specified VHD file already exists. VHD file path : {0}
[Cause]
A file with the same name as the specified VHD file already exists.
[Action]
Check the VHD file path and revise if necessary.
0: VHD file path
-
KNAE06271-E
Creation of a VHD file failed. VHD file path : {0}
[Cause]
An attempt to create a VHD file failed.
[Action]
Check the Hyper-V server status.
0: VHD file path
-
KNAE06272-E
A location could not be assigned to a SCSI controller. SCSI controller number : {0}, SCSI controller location number : {1}
[Cause]
An attempt to assign a location to a SCSI controller failed.
[Action]
Check the Hyper-V server status.
0: SCSI controller number
1: SCSI controller location number
-
KNAE06273-E
An attempt to associate a VHD file with a SCSI controller location failed. SCSI controller number : {0}, SCSI controller location number : {1}, VHD file path : {2}
[Cause]
An attempt to associate a VHD file with a SCSI controller location failed.
[Action]
Check the Hyper-V server status.
0: SCSI controller number
1: SCSI controller location number
2: VHD file path
-
KNAE06274-E
The extension "vhd" is missing in the specified VHD file path. VHD file path : {0}
[Cause]
The extension "vhd" is missing in the specified VHD file path.
[Action]
Specify the file path with the extension "vhd".
0: VHD file path
-
KNAE06275-E
The specified VHD file does not exist. VHD file path : {0}
[Cause]
The specified VHD file does not exist.
[Action]
Check the VHD file path and revise if necessary.
0: VHD file path
-
KNAE06276-E
The drive letter could not be acquired.
[Cause]
An attempt to acquire the drive letter failed.
[Action]
Check the Hyper-V server status.
-
KNAE06277-E
The state of the virtual server is incorrect. virtual server name : {0}, virtual server state : {1}, virtual server correct state : {2}
[Cause]
The state of the virtual server is invalid.
[Action]
Check the state of the virtual server you specified.
0: Virtual server name
1: Virtual server state
2: Virtual server correct state
-
KNAE06278-E
The data exchange service (KVP) of the Hyper-V integration service is disabled. virtual server name : {0}
[Cause]
The data exchange service (KVP) of the Hyper-V integration service is disabled.
[Action]
Enable the data exchange service (KVP) for the Hyper-V integration service on the specified virtual server.
0: Virtual server name
-
KNAE06279-E
The state check function of the virtual server timed out. virtual server name : {0}, check interval ({1}) : {2}, check count ({3}) : {4}
[Cause]
An attempt to check the virtual server state failed because the specified time has already passed.
[Action]
Check whether the specified virtual server has started and if the login window has been displayed.Check the check count and the check interval and revise if necessary before executing the service again.
0: Virtual server name
1: Check the interval property key
2: Check the interval
3: Check the count property key
4: Check the count
-
KNAE06280-E
The guest shutdown service of the Hyper-V integration service is disabled. virtual server name : {0}
[Cause]
The operating system shutdown of the Hyper-V integration service has been disabled.
[Action]
Enable the operating system shutdown of the Hyper-V integration service on the specified virtual server.
0: Virtual server name
-
KNAE06281-E
Information about the virtual server could not be acquired. virtual server name : {0}, KVP state : {1}, additional information : {2}
[Cause]
An attempt to acquire the information about the virtual server failed.
[Action]
Check whether the specified virtual server has been started and if the login window has been displayed.
0: Virtual server name
1: KVP state
2: Additional information about KVP
-
KNAE06282-E
Access to Hyper-V failed. You might not have permission to access the Hyper-V.
[Cause]
Access to Hyper-V failed. The user might not have permission to access to Hyper-V.
[Action]
Check whether the user has permission to access to the Hyper-V manager.
-
KNAE06283-E
The virtual server changed to an incorrect state. virtual server name : {0}, virtual server state : {1}
[Cause]
The virtual server changed to an invalid state.
[Action]
Check the state of the virtual server you specified and revise if necessary.
0: Virtual server name
1: Virtual server state
-
KNAE06284-I
The executed command terminated normally.
[Cause]
The executed command terminated normally.
[Action]
Nothing.
-
KNAE06285-E
The executed command terminated abnormally.
[Cause]
The executed command terminated abnormally.
[Action]
Follow the instructions in the error message and refer to the error code to eliminate the cause of the error.
-
KNAE06286-E
The results of the executed command could not be acquired. check interval ({0}) : {1}
[Cause]
The results of the executed command could not be acquired.
[Action]
Reduce the check interval.
0: Check the interval property key
1: Check the interval
-
KNAE06287-E
Acquisition of the results of the executed command timed out. check interval ({0}) : {1}, check count ({2}) : {3}
[Cause]
An attempt to acquire the results of the executed command timed out.
[Action]
Increase the check count or the check interval.
0: Check the interval property key
1: Check the interval
2: Check the count property key
3: Check the count
-
KNAE06288-E
The same MAC address was specified more than once. mac address : {0}
[Cause]
The same value was specified for multiple MAC addresses.
[Action]
Use a unique value when specifying a MAC address.
0: MAC address
-
KNAE06289-E
The specified virtual switch is not registered on the Hyper-V server. virtual switch name : {0}
[Cause]
The specified virtual switch is not registered on the Hyper-V server.
[Action]
Specify the specified virtual switch registered on the Hyper-V server.
0: Virtual switch name
-
KNAE06290-E
The specified folder was not found. folder name : {0}
[Cause]
The specified folder was not found.
[Action]
Check the folder path and revise if necessary.
0: Folder name
-
KNAE06291-E
The specified path is not a Windows absolute path. path : {0}
[Cause]
The specified path is not a Windows absolute path.
[Action]
Specify a Windows absolute path.
0: Path
-
KNAE06292-E
The specified path is not a folder. path : {0}
[Cause]
The specified path is not a folder.
[Action]
Specify a folder.
0: Path
-
KNAE06293-E
UNC format cannot be used for specification. path : {0}
[Cause]
UNC format cannot be used for specification.
[Action]
Specify a path in a non-UNC format.
0: Path
-
KNAE06294-E
The specified drive does not exist. drive letter : {0}
[Cause]
The specified drive does not exist.
[Action]
Check the path and revise if necessary, then specify an existing drive.
0: Drive letter
-
KNAE06295-E
The import-destination folder already contains a virtual disk. path : {0}
[Cause]
The import-destination folder already contains a virtual disk.
[Action]
Check the folder you specified as the import destination, and then delete the virtual disk or specify another path.
0: Import-destination folder path
-
KNAE06296-E
The results of the executed command could not be acquired.
[Cause]
The results of the executed command could not be acquired.
[Action]
Check whether the execution environment satisfies the prerequisites.
-
KNAE06297-E
A non-numeric value is specified as a column number : {0}
[Cause]
A non-numeric value is specified as a column number.
[Action]
Specify a numeric value.
0: Specified column number
-
KNAE06298-E
The executed command terminated abnormally. return code : {0}
[Cause]
The executed command terminated abnormally.
[Action]
Perform the following operations:
- Follow the instructions in the error message and refer to the error code to eliminate the cause of the error.
- Check whether the virtual server has already been deleted by another operation.
0: Executed command return code (error code)
-
KNAE06299-E
An attempt to create a folder failed because a file with the same name as the folder already exists.
[Cause]
An attempt to create a folder failed because a file with the same name as the folder already exists.
[Action]
Specify another file name.
-
KNAE06300-E
Virtual switch setup failed.
[Cause]
Virtual switch setup failed.
[Action]
Wait a while, and then try again.
0: Virtual switch port name
-
KNAE06301-E
Processing was interrupted because an operation might have been performed on the virtual server. virtual server name : {0}
[Cause]
Processing was interrupted because an operation might have been performed on the virtual server.
[Action]
Check the state of the virtual server you specified.
0: Virtual server name
-
KNAE06302-E
Processing was interrupted because an operation might have been performed on the snapshot tree. virtual server name : {0}
[Cause]
Processing was interrupted because an operation might have been performed on the snapshot tree.
[Action]
Check the state of the virtual server you specified.
0: Virtual server name
-
KNAE06303-I
The command finished normally, but generated a warning.
[Cause]
The command finished normally, but generated a warning.
[Action]
Check the message, and then perform the necessary operations.
-
KNAE06304-E
No virtual servers exist.
[Cause]
No virtual servers exist.
[Action]
Check whether a virtual server is registered on the Hyper-V server.
-
KNAE06305-E
The specified property value is invalid. Specify a value of at least {0}. key : {1}, value : {2}
[Cause]
The specified property value is invalid.
[Action]
Check the error message, and revise the properly value if necessary.
0: Minimum value that can be specified to the property
1: Property key
2: Property value
-
KNAE06306-E
The number of listed columns from which data is to be acquired exceeds the maximum.
[Cause]
The number of listed columns from which data is to be acquired is too great.
[Action]
No more than 90 listed columns can be specified.
-
KNAE06307-E
An attempt to copy files failed. file : {0}, return code : {1}
[Cause]
An attempt to copy files failed.
[Action]
Check the access permissions for the copy destination and the amount of free disk space.
0: Specified file
1: Copy the command return code
-
KNAE06308-W
A long IP address (in IPv4 format) was truncated at the 1024th character.
[Cause]
A long IP address (in IPv4 format) was truncated at the 1025th character.
[Action]
Nothing.
-
KNAE06309-E
Snapshots cannot be imported.
[Cause]
Snapshots cannot be imported.
[Action]
Specify a virtual server for which a snapshot is not created as the exported virtual server.
-
KNAE06310-E
Acquisition of the virtual disk failed. virtual server name : {0}
[Cause]
An attempt to acquire the virtual disk failed.
[Action]
Check that a virtual server is connected to the virtual disk.
0: Virtual server name
-
KNAE06311-E
Acquisition of the object failed.
[Cause]
An attempt to acquire the object failed.
[Action]
Contact the customer support center.
-
KNAE06312-E
Replication of the virtual server failed because the import destination contains a file that has the same name as the virtual server. path : {0}
[Cause]
The import destination contains a file that has the same name as the virtual server. As a result, the attempt to replicate the virtual server failed.
[Action]
Check the folder path you specified as the import destination, and then delete the file or specify another path.
0: Import destination folder path
-
KNAE06313-E
A folder that has the same name as the specified VHD file already exists. VHD file path : {0}
[Cause]
A folder that has the same name as the specified VHD file already exists.
[Action]
Check the VHD file path.
0: VHD file path
-
KNAE06314-E
A numeric value was specified for a column name. column name : {0}
[Cause]
A numeric value was specified for a column name.
[Action]
Specify a non-numeric value.
0: Specified column name
-
KNAE06315-E
Acquisition of the shutdown object failed. virtual server name : {0}
[Cause]
An attempt to acquire the shutdown object failed.
[Action]
The specified virtual server was deleted, or the state was changed. Check the virtual server.
0: Virtual server name
-
KNAE06316-E
Acquisition of the KVP object failed. virtual server name : {0}
[Cause]
An attempt to acquire the KVP object failed.
[Action]
The specified virtual server was deleted, or the state was changed. Check the virtual server.
0: Virtual server name
-
KNAE06317-E
The specified column number exceeds the maximum. column number : {0}
[Cause]
The specified column number exceeds the maximum.
[Action]
Specify a column number that is 255 or less.
0: File column number
-
KNAE06318-E
The length of the key-column name exceeds the maximum. key-column name : {0}
[Cause]
The length of the key-column name exceeds the maximum.
[Action]
Specify a column name that is 64 or less characters.
0: Column name
-
KNAE06319-E
The key-column name is invalid. key-column name : {0}
[Cause]
The key-column name is invalid.
[Action]
Check the product manual and then specify a valid column name.
0: Column name
-
KNAE06320-E
The length of the name of the data acquisition-target column exceeds the maximum. column name : {0}
[Cause]
The length of the name of the data acquisition-target column exceeds the maximum.
[Action]
Specify a column name that is 64 or less characters.
0: Column name
-
KNAE06321-E
The name of the data acquisition-target column is invalid. column name : {0}
[Cause]
The name of the data acquisition-target column is invalid.
[Action]
Check the product manual and then specify a valid column name.
0: Column name
-
KNAE06322-E
The key value is invalid. key value : {0}
[Cause]
The key value is invalid.
[Action]
Check the product manual and then specify a valid key value.
0: Key value
-
KNAE06323-E
No column has the specified name. column name : {0}
[Cause]
The column with the specified name does not exist.
[Action]
Specify the existing column name.
0: Column name
-
KNAE06324-E
The same MAC address is specified for more than one virtual network adapter. mac address : {0}
[Cause]
The same MAC address is specified for multiple virtual network adapters.
[Action]
Use a unique value when specifying a MAC address.
0: MAC address
-
KNAE06325-E
A virtual server cannot be shut down. virtual server name : {0}, shutdown state : {1}
[Cause]
A virtual server cannot be shut down.
[Action]
Check the virtual server you specified and revise if necessary.
0: Virtual server name
1: Shutdown state
-
KNAE06326-W
Additional information about the data exchange service (KVP) was acquired. content : {0}
[Cause]
Additional information about the data exchange service (KVP) was acquired.
[Action]
Nothing.
0: Additional information about KVP state
-
KNAE06327-E
The version of Hyper-V integration services that is installed on the virtual server is different from the version that is installed on the Hyper-V server. virtual server name : {0}
[Cause]
The versions of the Hyper-V integration services installed on the virtual server are different from the versions that are installed on the Hyper-V server.
[Action]
Upgrade the Hyper-V integration services installed on the Hyper-V server.
0: Virtual server name
-
KNAE06328-E
The number of NICs connected to the virtual server exceeds the maximum number of NICs that can be set. Revise the number of NICs. maximum number of NICs : {0}
[Cause]
The number of NICs connected to the virtual server exceeds the maximum number of NICs that can be set.
[Action]
Reduce the number of NICs set to the virtual server to a number that is equal to or less than the maximum.
0: Maximum number of NICs
-
KNAE06329-E
The diskpart command could not be executed, because another process is executing it.
[Cause]
The diskpart command could not be executed because it was being executed by another process.
[Action]
Wait a while, and then try again.
-
KNAE06330-E
Could not identify the specified image. There are two or more images with the same name.
[Cause]
Could not identify the specified image. There are two or more images with the same name.
[Action]
Specify a different image or change the name of the image.
-
KNAE06331-E
Could not identify the specified instance type. There are two or more instance types with the same name.
[Cause]
Could not identify the specified instance type. There are two or more instance types with the same name.
[Action]
Specify a different instance type or change the name of the instance type.
-
KNAE06332-E
Could not identify the specified network. There are two or more networks with the same name.
[Cause]
Could not identify the specified network. There are two or more networks with the same name.
[Action]
Specify a different network or change the name of the network.
-
KNAE06333-E
Could not identify the specified volume. There are two or more volumes with the same name.
[Cause]
Could not identify the specified volume. There are two or more volumes with the same name.
[Action]
Specify a different volume or change the name of the volume.
-
KNAE06334-E
The specified instance name is already being used.
[Cause]
The specified instance name is already being used.
[Action]
Specify a different instance name.
-
KNAE06335-E
The instance did not finish starting up within the monitoring time.
[Cause]
The instance did not finish starting up within the monitoring time.
[Action]
Check the state of the instance. If you choose to execute the service again, revise the number of check times and check intervals.
-
KNAE06336-E
The specified floating IP address is already being used.
[Cause]
The specified floating IP address is already being used.
[Action]
Specify a different floating IP address.
-
KNAE06337-E
Could not obtain the specified floating IP address. The specified floating IP address does not exist in the IP address allocation pool.
[Cause]
Could not obtain the specified floating IP address. The specified floating IP address does not exist in the IP address allocation pool.
[Action]
Check the IP address allocation pool.
-
KNAE06338-E
There are no floating IP addresses available in the IP address allocation pool.
[Cause]
There are no floating IP addresses available in the IP address allocation pool.
[Action]
Check the IP address allocation pool.
-
KNAE06339-E
Failed to confirm the start of the instance.
[Cause]
Failed to confirm the start of the instance.
[Action]
Check the state of the instance. If you choose to execute the service again, revise the number of check times and check intervals.
-
KNAE06340-E
Failed to set the host name.
[Cause]
Failed to set the host name.
[Action]
Check the OS state.
-
KNAE06341-E
Failed to set the time zone.
[Cause]
Failed to set the time zone.
[Action]
Check the OS state.
-
KNAE06342-E
Failed to set the DNS suffix.
[Cause]
Failed to set the DNS suffix.
[Action]
Check the OS state.
-
KNAE06343-E
Failed to check for Windows updates.
[Cause]
Failed to check for Windows updates.
[Action]
Eliminate the cause of the problem by referring to the error code and the details of the error message.
-
KNAE06344-E
The Windows Update service is not running. As a result, the attempt to check for Windows updates failed.
[Cause]
The Windows Update service is not running.
[Action]
Make sure the Windows Update service is running.
If the Window Update service is not running, start the service and then check for updates again.
-
KNAE06345-E
Failed to download Windows updates.
[Cause]
Failed to download Windows updates.
[Action]
Eliminate the cause of the problem by referring to the error code and the details of the error message.
-
KNAE06346-E
Failed to install Windows updates.
[Cause]
Failed to install Windows updates.
[Action]
Eliminate the cause of the problem by referring to the error code and the details of the error message.
-
KNAE06347-E
The installation of Windows updates is now complete. However, there were some updates which could not be installed.
[Cause]
There were some Window updates which could not be installed.
[Action]
Eliminate the cause of the problem by referring to the error code and the details of the error message.
-
KNAE06348-I
There are no Windows updates available.
[Cause]
There are no Windows updates available.
[Action]
No action is necessary.
-
KNAE06349-I
Suppressed all the available Windows updates because they are specified in the exclusion list.
[Cause]
All the available windows updates are specified in the exclusion list.
[Action]
No action is necessary.
-
KNAE06350-I
Suppressed all the available Windows updates because they are specified in the exclusion list or require user intervention.
[Cause]
All the available Windows updates are specified in the exclusion list or require user intervention.
[Action]
Manually install Windows updates that require user intervention.
-
KNAE06351-W
Some Windows updates have not been fully downloaded.
[Cause]
Some Windows updates have not been fully downloaded.
[Action]
After automatic installation is complete, wait a while and then try to download the updates again.
-
KNAE06352-I
Successfully installed Windows updates.
[Cause]
Successfully installed Windows updates.
[Action]
No action is necessary.
-
KNAE06353-I
Collected information about the need for the reboot. Reboot:{0}
[Cause]
Collected information about the need for the reboot.
[Action]
Reboot: Necessary: The server needs to be restarted.
Reboot: Unnecessary: The server does not need to be restarted
0: Need for reboot
-
KNAE06354-E
Could not identify the specified image. The specified image does not exist.
[Cause]
Could not identify the specified image. The specified image does not exist.
[Action]
Specify a different image.
-
KNAE06355-E
Could not identify the specified instance type. The specified instance type does not exist.
[Cause]
Could not identify the specified instance type. The specified instance type does not exist.
[Action]
Specify a different instance type.
-
KNAE06356-E
Could not identify the specified network. The specified network does not exist.
[Cause]
Could not identify the specified network. The specified network does not exist.
[Action]
Specify a different network.
-
KNAE06357-E
Could not identify the specified volume. The specified volume does not exist.
[Cause]
Could not identify the specified volume. The specified volume does not exist.
[Action]
Specify a different volume.
-
KNAE06358-E
Could not identify the specified key pair. The specified key pair does not exist.
[Cause]
Could not identify the specified key pair. The specified key pair does not exist.
[Action]
Specify a different key pair.
-
KNAE06359-E
Could not identify the specified security group. The specified security group does not exist.
[Cause]
Could not identify the specified security group. The specified security group does not exist.
[Action]
Specify a different security group.
-
KNAE06360-I
There are Windows updates which have not been applied. Number of updates not applied: {0}
[Cause]
There are Windows updates which have not been applied.
[Action]
No action is necessary.
0: Number of updates which have not been applied
-
KNAE06361-E
The specified number of CPUs exceeds the maximum value. maximum value : {0}
[Cause]
The number of specified CPUs exceeds the maximum value.
[Action]
Revise the specified value for the number of CPUs.
0: Maximum number of CPUs of system
-
KNAE06362-E
The specified memory size is higher than the max size. max size : {0}
[Cause]
The specified amount of memory exceeds the maximum value.
[Action]
Revise the value specified for the amount of memory.
0: Maximum amount of memory of system
-
KNAE06363-E
Acquisition of theDataExchangeComponent object failed. virtual server name : {0}
[Cause]
An attempt to acquire the object failed.
[Action]
Contact the customer support center.
-
KNAE06364-E
Acquisition of the ShutdownComponent object failed. virtual server name : {0}
[Cause]
An attempt to acquire the object failed.
[Action]
Contact the customer support center.
-
KNAE06365-E
The version of Hyper-V is not supported.
-
KNAE06366-E
Acquisition of the Hyper-V Module failed.
-
KNAE06367-E
Acquisition of the exported virtual server failed.
-
KNAE06368-W
Replace target string was not found.
[Action]
Nothing.
-
KNAE06369-E
No IP address has been set for the specified virtual server. virtual server name : {0}
[Cause]
No IP address has been set for the specified virtual server.
[Action]
Check the IP address of the virtual server.
0: Virtual server name
-
KNAE06370-E
Could not specify a reservation value that exceeds the maximum value for virtual processor resources.
[Cause]
When reserving virtual processor resources, you cannot specify a reservation value that exceeds the maximum value for virtual processor resources.
[Action]
Check and, if necessary, revise the values you specified for the reservation and the maximum values for virtual processor resources.
-
KNAE06371-E
Some but not all CPU settings were changed. virtual server name : {0}
[Cause]
Some but not all CPU settings were changed.
[Action]
Check the CPU settings of the virtual server.
0: Virtual server name
-
KNAE06372-E
Could not identify the specified instance. There are two or more instances with the same name. instance name:{0}
[Cause]
Could not identify the specified instance. There are two or more instances with the same name. instance name:{0}
[Action]
Specify a different instance, or change the name of the instance.
0: Instance name
-
KNAE06373-E
Could not identify the specified instance. The specified instance does not exist. instance name:{0}
[Cause]
Could not identify the specified instance. The specified instance does not exist. instance name:{0}
[Action]
Specify a different instance.
0: Instance name
-
KNAE06374-E
Could not identify the specified volume type. The specified volume type does not exist. volume type:{0}
[Cause]
Could not identify the specified volume type. The specified volume type does not exist. volume type:{0}
[Action]
Specify a different volume type.
0: Volume type
-
KNAE06375-E
The specified volume name is already being used. volume name:{0}
[Cause]
The specified volume name is already being used. volume name:{0}
[Action]
Specify a different volume name.
0: Volume name
-
KNAE06376-E
Failed to confirm the create of the volume. volume state:{0}
[Cause]
Failed to confirm the create of the volume. volume state:{0}
[Action]
Check the status of the volume.
0: Volume state
-
KNAE06377-E
Creating the volume did not finish within the monitoring time.
[Cause]
Creating the volume did not finish within the monitoring time.
[Action]
Check the status of the volume. To execute the service again, revise the number of checks and the check intervals.
-
KNAE06378-E
The specified volume is already attached to the other instance.
[Cause]
The specified volume is already attached to the other instance.
[Action]
Specify a different volume name.
-
KNAE06379-E
Failed to confirm the attachment of the volume. volume state:{0}
[Cause]
Failed to confirm the attachment of the volume. volume state:{0}
[Action]
Check the status of the volume and the instance to which it is connected.
0: Volume state
-
KNAE06380-E
Attaching the volume did not finish within the monitoring time.
[Cause]
Attaching the volume did not finish within the monitoring time.
[Action]
Check the status of the volume and the instance to which it is connected. To execute the service again, revise the number of checks and the check intervals.
-
KNAE06381-E
Attaching the volume finished normally, but could not make be sure the attached instance.
[Cause]
Attaching the volume finished normally, but could not make be sure the attached instance.
[Action]
Check the status of the volume and the instance to which it is connected.
-
KNAE06382-E
Attaching the volume finished normally, but attached to the other instance.
[Cause]
Attaching the volume finished normally, but attached to the other instance.
[Action]
Check the status of the volume and the instance to which it is connected.
-
KNAE06383-E
The specified instance cannot be started. The state of the instance is incorrect. instance state:{0}
[Cause]
The specified instance cannot be started. The state of the instance is incorrect. instance state:{0}
[Action]
Check the status of the instance.
0: Instance state
-
KNAE06384-E
The specified volume number exceeds the maximum. volume number : {0}
[Cause]
The specified volume number exceeds the maximum. volume number : {0}
0: Volume number
-
KNAE06385-E
Could not identify the specified container. There are two or more containeres with the same name. container name:{0}
[Cause]
Could not identify the specified container. There are two or more containeres with the same name. container name:{0}
[Action]
Specify a different container. or change the name of the container.
0: Container name
-
KNAE06386-E
Could not identify the specified container. The specified container does not exist. container name:{0}
[Cause]
Could not identify the specified container. The specified container does not exist. container name:{0}
[Action]
Specify a different container.
0: Container name
-
KNAE06387-E
Failed to confirm the create of the temporary volume. volume id:{0}
[Cause]
Failed to confirm the create of the temporary volume. volume id:{0}
[Action]
Check the status of the volume.
0: Volume ID
-
KNAE06388-E
Creating the temporary volume did not finish within the monitoring time.
[Cause]
Creating the temporary volume did not finish within the monitoring time.
[Action]
Check the status of the volume. To execute the service again, revise the number of checks and the check intervals.
-
KNAE06389-E
Failed to confirm the backup of the volume. backup id:{0}
[Cause]
Failed to confirm the backup of the volume. backup id:{0}
[Action]
Check the status of the volume and of the container.
0: Backup ID
-
KNAE06390-E
Backing up the volume did not finish within the monitoring time.
[Cause]
Backing up the volume did not finish within the monitoring time.
[Action]
Check the status of the volume and of the container. To execute the service again, revise the number of checks and the check intervals.
-
KNAE06391-E
Failed to confirm the delete of the volume. volume id:{0}
[Cause]
Failed to confirm the delete of the volume. volume id:{0}
[Action]
Check the status of the volume.
0: Volume ID
-
KNAE06392-E
Deleting the volume did not finish within the monitoring time.
[Cause]
Deleting the volume did not finish within the monitoring time.
[Action]
Check the status of the volume. To execute the service again, revise the number of checks and the check intervals.
-
KNAE06393-E
The specified volume cannot be attached. The state of the volume is incorrect. volume state:{0}
[Cause]
The specified volume cannot be attached. The state of the volume is incorrect. volume state:{0}
[Action]
Check the status of the volume.
0: Volume state
-
KNAE06394-E
The specified volume is already attached, but could not make be sure the attached instance.
[Cause]
The specified volume is already attached, but could not make be sure the attached instance.
[Action]
Check the status of the volume.
-
KNAE06395-E
The source volume for the specified volume could not be found. volume name:{0}
[Cause]
The source volume for the specified volume could not be found. volume name:{0}
[Action]
Check the state of the volume.
0: Volume name
-
KNAE06396-E
The resource group name and the service name are assigned to the same extended text-data number.
[Cause]
The resource group name and the service name are assigned to the same extended text-data number.
[Action]
Make sure that the resource group name and the service name are assigned to different extended text-data numbers.
-
KNAE06397-E
The specified encoding type is not supported. encode type:{0}
0:Encoding type
-
KNAE06398-E
The specified query file is a folder. query file path:{0}
0:Query file path
-
KNAE06399-E
The specified query file does not exist. query file path:{0}
0:Query file path
-
KNAE06400-E
The specified path is not a folder. output folder path:{0}
0:Output folder path
-
KNAE06401-E
The specified output folder does not exist. output folder path:{0}
0:Output folder path
-
KNAE06402-E
Failed to open the specified file. query file:{0}, encoding type:{1}
0:Query file path
1:Encoding type
-
KNAE06403-E
The number of lines in the specified query file exceeds the limit. query file path:{0}, encoding type:{1}, limit:{2}
0:Query file path
1:Encoding type
2:Limit
-
KNAE06404-E
Failed to obtain an ODBC connection. connection string:{0}
0:Connection string
-
KNAE06405-E
Failed to open an ODBC connection with the database server. connection string:{0}
0:Connection string
-
KNAE06406-E
Failed to start a database transaction.
-
KNAE06407-E
Failed to generate an ODBC command. line:{0}
0:line number
-
KNAE06408-E
Failed to execute a specified SQL statement. line:{0}
0:line number
-
KNAE06409-E
Failed to open the file used for output. file path:{0}
0:Output file path
-
KNAE06410-E
The title line could not be created.
-
KNAE06411-E
Failed to write the result to a file. file path:{0}
0:Output file path
-
KNAE06412-E
The output data exceeded the maximum length. maximum length : {0}
[Cause]
The output data exceeded the maximum length.
[Action]
Check the input data if necessary.
0: Maximum length
-
KNAE06413-E
The created virtual disk file does not exist. virtual disk file path : {0}
-
KNAE06414-E
The extension "vhd" or "vhdx"" is missing in the specified virtual disk file name. virtual disk file name : {0}
-
KNAE06415-E
An existing file has the same name as a virtual disk storage folder path specified in the Hyper-V server. Hyper-V virtual disk folder path : {0}
-
KNAE06416-E
The extension "vhd" or "vhdx" is missing in the specified virtual disk file path. virtual disk file path : {0}
-
KNAE06417-E
The specified virtual disk file does not exist. virtual disk file path : {0}
-
KNAE06418-E
An attempt to create a directory failed because a file with the same name as the directory already exists. path: {0}
[Cause]
An attempt to create a directory failed because a file with the same name as the directory already exists.
[Action]
Specify another file name.
0: File path
-
KNAE06419-E
The specified property value is invalid. key : {0}, value : {1}
[Cause]
The specified property value is invalid.
[Action]
Check the property and revise if necessary.
0: Property key
1: Property value
-
KNAE06420-E
The combination of two properties is invalid. key1 : {0}, key2 : {1}
[Cause]
The combination of two properties is invalid. key1 : {0}, key2 : {1}
[Action]
Check the properties and revise if necessary.
0: Property key1
0: Property key2
-
KNAE06421-E
The specified file already exists. file path : {0}
[Cause]
The specified file already exists. file path : {0}
[Action]
Specify another file name.
0: File path
-
KNAE06422-E
The specified path is not an absolute path. path : {0}
[Cause]
The specified path is not an absolute pass : {0}
[Action]
Specify the absolute path.
0: File path
-
KNAE06423-E
A directory with the specified file name already exists. path: {0}
[Cause]
The directory of the name same as the specified file name exists.
[Action]
Specify an other file name.
0: File path
-
KNAE06424-E
A folder with the specified file name already exists. path: {0}
[Cause]
The folder of the name same as the specified file name exists.
[Action]
Specify an other file name.
0: File path
-
KNAE06425-E
The file path is not specified.
[Cause]
The file path is not specified.
[Action]
Check the properties and revise if necessary.
-
KNAE06426-E
The same file path was specified more than once. file path : {0}
[Cause]
The same file path was specified more than once. file path : {0}
[Action]
Use a unique value when specifying a file name.
0: File path