3.1.2 Messages KNAE01000 through KNAE01999
-
KNAE01009-W
Cannot delete the file or folder while the service template manager was starting (path: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the file or folder.
(2) Another program is using the file or folder.
[Action]
Revise the status of the file or folder before you start the service again.
If another error message was output before this one, take action according to the instructions in that message.
0: File or folder path
-
KNAE01010-E
A database access error occurred while starting the service template manager.
[Cause]
The database is not running properly.
[Action]
Take the following actions:
(1) Restart the services.
(2) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01011-W
A file read error occurred while starting the service template manager.
[Cause]
Possible causes are as follows:
(1) The file or folder does not exist.
(2) The user does not have the correct permissions for the file or folder.
(3) The file contains an error.
[Action]
Take action according to the error message displayed before this one.
-
KNAE01012-W
Cannot read the email notification definition file (path: {0}).
[Cause]
Possible causes are as follows:
(1) The email notification definition file contains an error.
(2) The user does not have the correct permissions for the email notification definition file.
(3) Another program is using the email notification definition file.
[Action]
Confirm the details of the cause, and then restart the services.
0: File path
-
KNAE01101-E
The service creation has failed.
[Cause]
A database error occurred during an attempt to add a service.
[Action]
Take the following actions:
(1) Collect the log information, and then contact you system administrator.
(2) Make sure that the services are running.
(3) If the services are running, restart the services, and then try again.
-
KNAE01102-E
Cannot create a service.
[Cause]
The service template might have been deleted from a management interface open in another browser window.
[Action]
Import the service template again, and then re-execute it.
-
KNAE01103-E
Cannot create a service.
[Cause]
The specified service name already exists in the resource group.
[Action]
Specify a service name that is unique within the resource group, and then retry the operation.
-
KNAE01105-E
Cannot create a service.
[Cause]
The user does not have the permission to perform create operation for the service.
[Action]
Assign the Modify or greater permission for the resource group associated with the service, and then retry the operation.
-
KNAE01106-E
You have already added maximum number of service templates.
[Action]
Delete one or more service templates, and then attempt the import again.
-
KNAE01107-E
The file extension of a service template or service template set is invalid (file name: {0}).
[Action]
Specify a service template or service template set with the file extension .zip or .st, and then retry the operation.
0: File name
-
KNAE01108-E
Cannot read a service template(s) (path: {0}).
[Action]
Confirm the access permissions for the folder, and then retry the operation.
0: File path
-
KNAE01109-E
Cannot create a temporary folder to decompress a service template (folder: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the folder.
(2) There is not enough free space on the disk.
[Action]
Confirm the following, and then retry the operation:
(1) The access permissions for the folder
(2) The free space available on the disk
0: Folder path
-
KNAE01110-E
Decompression of a specified service template set has failed (service template set: {0}, destination folder: {1}).
[Cause]
Possible causes are as follows:
(1) The service template set is not a valid ZIP file.
(2) The user does not have the correct permissions for the file or folder.
(3) There is not enough free space on the disk.
[Action]
Confirm the following, and then try again:
(1) The integrity of the zip file
(2) The access permissions for the destination folder
(3) The free space on the disk
0: File name
1: Folder path
-
KNAE01112-E
Cannot access a temporary folder (folder: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the temporary folder to decompress the service template set.
(2) There is not enough free space on the disk.
[Action]
Confirm the following, and then retry the operation:
(1) The access permissions for the file or folder
(2) The free space on the disk
0: Folder path
-
KNAE01113-E
Reading of service template file names from a service template set failed (file name: {0}).
[Cause]
The user does not have the correct permissions for the file or folder.
[Action]
Confirm the access permissions for the file or folder, and then retry the operation.
0: File name
-
KNAE01114-W
Cannot delete temporary folder to decompress a service template set (folder: {0}).
[Cause]
Either the user does not have the correct permissions for the folder, or the folder has already been deleted.
[Action]
Delete the folder manually.
0: Folder path
-
KNAE01115-E
Creation of a temporary folder to decompress a service template has failed (folder: {0}).
[Cause]
The user does not have the correct permissions for the folder.
[Action]
Confirm the access permissions for the folder, and then import the service template again.
0: Folder path
-
KNAE01116-E
Cannot decompress a service template (service template: {0}, destination folder: {1}).
[Cause]
Possible causes are as follows:
(1) There is not enough free space on the disk.
(2) The file contains an error.
[Action]
Confirm the free space on the disk, and then import the service template again. If the problem persists, collect log information, and then contact your system administrator.
0: File name
1: Folder path
-
KNAE01117-E
Cannot read a service template (path: {0}).
[Cause]
The file cannot be accessed.
[Action]
Confirm the access permissions for the file, and then import the service template again.
0: File path
-
KNAE01118-E
Cannot access a temporary folder necessary to decompress a service template (folder: {0}).
[Cause]
The specified temporary folder cannot be accessed.
[Action]
Confirm the access permissions for the folder, and then import the service template again.
0: Folder path
-
KNAE01119-E
The content in the service template is invalid (file name: {0}, error details: {1}).
[Cause]
The service template contains an error.
[Action]
Revise the service template according to the error details, and then package the service template again.
0: File name
1: Error details
-
KNAE01120-W
Cannot delete a temporary folder to decompress a service template (folder: {0}).
[Cause]
Another program is using the folder.
[Action]
Temporary folders are automatically deleted when the service starts. Confirm the access permissions for the folder before starting the service again.
0: Folder path
-
KNAE01121-E
The plug-in definition file is invalid (file: {0}, error details: {1}).
[Cause]
The plug-in definition file contains an error.
[Action]
Revise the plug-in definition file according to the error details, and then package the service template again.
0: File path
1: Error details
-
KNAE01123-E
Cannot read the plug-in (vendor ID: {0}, plug-in ID: {1}, version: {2}).
[Cause]
The database is not running properly.
[Action]
Import the service template again.
0: Vendor ID
1: Plug-in ID
2: Version
-
KNAE01124-E
Cannot import a plug-in because a database access error occurred.
[Cause]
The database is not running properly.
[Action]
Perform the following actions:
(1) Restart the services, and then import the service template again.
(2) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01125-E
Cannot delete an imported plug-in definition file (folder: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the folder.
(2) Another program is using the folder or files under the folder.
[Action]
Delete the folder, and then import the service template again.
0: Folder path
-
KNAE01126-E
Cannot copy the plug-in definition file (destination folder: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the folder.
(2) Another program is using the folder or files under the folder.
(3) There is not enough free space on the disk.
[Action]
Confirm the details of the cause, and then import the service template again.
0: Folder path
-
KNAE01127-E
Cannot access the folder containing the plug-in definition file (folder: {0}).
[Cause]
The user cannot access the folder that contains the plug-in definition file.
[Action]
Confirm the access permissions for the folder, and then import the service template again.
0: Folder path
-
KNAE01128-E
The service definition file is invalid (file: {0}, error details: {1}).
[Cause]
The service definition file contains an error.
[Action]
Revise the service definition file according to the error details, and then package the service template again.
0: File path
1: Error details
-
KNAE01130-E
Cannot read the service template (vendor ID: {0}, service template ID: {1}, version: {2}).
[Cause]
The service template contains an error.
[Action]
Import the service template again.
0: Vendor ID
1: Service template ID
2: Version
-
KNAE01131-E
Cannot import a service template because a database access error occurred.
[Cause]
The database is not running properly.
[Action]
Take the following actions:
(1) Restart the services, and then import the service template again.
(2) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01132-E
Cannot delete an imported service definition file (folder: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the folder.
(2) Another program is using the folder or files under the specified folder.
[Action]
Delete the folder, and then import the service template again.
0: Folder path
-
KNAE01133-E
Cannot copy the service definition file (destination folder: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the folder.
(2) Another program is using the folder or files under the folder.
(3) There is not enough free space on the disk.
[Action]
Confirm the details of the cause, and then import the service template again.
0: Folder path
-
KNAE01134-E
Cannot access the folder containing the service definition file (folder: {0}).
[Cause]
The user cannot access the folder that contains the service definition file.
[Action]
Confirm the access permission for the folder, and then import the service template again.
0: Folder path
-
KNAE01135-E
Cannot delete the service template.
[Cause]
An existing service was created from the service template that the user attempted to delete.
[Action]
Delete the services that were created using the template you want to delete, and then retry the operation.
-
KNAE01136-E
Cannot delete the service template.
[Cause]
A database error occurred during an attempt to delete a service template.
[Action]
Perform the following:
(1) Collect log information, and then contact your system administrator.
(2) Make sure that the services are running.
(3) If the services are running, restart the services, and then retry the operation.
-
KNAE01137-W
Cannot delete the service template (path: {0}).
[Cause]
A file access error occurred during an attempt to delete the service template.
[Action]
Manually delete files from the specified folder.
0: File path
-
KNAE01138-E
Cannot create a service.
[Cause]
The maximum number of services has already been created.
[Action]
Delete unnecessary services, and then create service again.
-
KNAE01139-E
Cannot edit the service.
[Cause]
A database error occurred during an attempt to edit the service.
[Action]
Confirm the following actions:
(1) Collect log information, and then contact your system administrator.
(2) Make sure that the services are running.
(3) If the services are running, restart the services, and then try again.
-
KNAE01140-E
Cannot edit the service.
[Cause]
The service might have been deleted from a management interface open in another browser window.
[Action]
Make sure that the service template has not been deleted.
-
KNAE01141-E
Cannot edit the service.
[Cause]
A service with the same name already exists in the resource group.
[Action]
Specify a service name that is unique within the resource group.
-
KNAE01143-E
Cannot edit the service.
[Cause]
The user does not have the edit permission for the service.
[Action]
Assign the Modify or greater permission level to the resource group associated with the service, and then retry the operation.
-
KNAE01144-E
Cannot delete the service.
[Cause]
A database error occurred during an attempt to delete a service.
[Action]
Take the following actions:
(1) Collect log information, and then contact a system administrator.
(2) Make sure that the services are running.
(3) If the services are running, restart the services, and then try again.
-
KNAE01145-E
Cannot delete the service.
[Cause]
There is an existing task associated to the service that the user attempted to delete.
[Action]
Archive the tasks that were created using the service you want to delete, and then retry again.
-
KNAE01146-E
Cannot delete a folder containing an imported custom UI folder (folder: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the folder.
(2) Another program is using the folder or files under the folder.
[Action]
Delete the folder, and then import the service template again.
0: Folder path
-
KNAE01147-E
Cannot copy a custom UI folder (destination folder: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the folder.
(2) Another program is using the folder or files under the folder.
(3) There is not enough free space on the disk.
[Action]
Confirm the details of the cause, and then import the service template again.
0: Folder path
-
KNAE01150-E
Cannot read the schema definition file (file: {0}, error details: {1}).
[Cause]
The schema definition file contains an error.
[Action]
Reinstall the product. If the problem persists, collect log information, and then contact a system administrator.
0: File path
1: Error details
-
KNAE01151-E
Cannot access the service because the user does not have the access permission for the service.
[Cause]
The user does not have the view permission for the service.
[Action]
Assign Submit or the required access permission to the resource group associated with the service, and then retry the operation.
-
KNAE01152-E
Cannot delete the service because the user does not have the edit permission for the service.
[Cause]
The user does not have the edit permission for the service.
[Action]
Assign Modify or the required edit permission to the resource group associated with the service, and then retry the operation.
-
KNAE01154-E
Cannot import a service template.
[Cause]
The specified service template has already been imported.
[Action]
Make sure that the specified service template was created correctly, and then retry the operation.
-
KNAE01155-E
Cannot import a plug-in.
[Cause]
The plug-in has already been imported.
[Action]
Make sure that the plug-in was created correctly, and then retry the operation.
-
KNAE01156-E
Cannot execute the overwrite-import of a service template (vendor ID: {0}, service Template ID: {1}, version: {2}).
[Cause]
The service template with the specified vendor ID, service template ID, and version was not imported properly.
[Action]
Make sure that the service template was created correctly, and then try again.
0: Vendor ID
1: Service template ID
2: Version
-
KNAE01157-E
Cannot execute the overwrite-import of a plug-in (vendor ID: {0}, plug-in ID: {1}, version: {2}).
[Cause]
The plug-in with the specified vendor ID, plug-in ID, and version was not imported.
[Action]
Make sure that the plug-in was created correctly, and then try again.
0: Vendor ID
1: Plug-in ID
2: Version
-
KNAE01159-E
The property scope cannot be changed (property key: {0}).
[Cause]
A property with a different scope has already been imported.
[Action]
Make sure that the service template was created correctly, and then try again.
0: Property key
-
KNAE01160-I
The overwrite-import of the plug-in will now start (vendor ID: {0}, plug-in ID: {1}, version: {2}).
0: Vendor ID
1: Plug-in ID
2: Version
-
KNAE01161-I
The overwrite-import of the service template will now start (vendor ID: {0}, service template ID: {1}, version: {2}).
0: Vendor ID
1: Service template ID
2: Version
-
KNAE01162-E
The property data type cannot be changed (property key: {0}).
[Cause]
A property with a different data type has already been imported.
[Action]
Make sure that the service template was created correctly, and then try again.
0: Property key
-
KNAE01163-E
The reading of a preset property definition file has failed (file: {0}).
[Cause]
The file cannot be accessed.
[Action]
Revise the file access permissions, and then package the service template again.
0: File path
-
KNAE01164-E
The preset property definition file is invalid (file: {0}, error details: {1}).
[Cause]
The preset property definition file contains an error.
[Action]
Revise the preset property definition file according to the error details, and then package the service template again.
0: File path
1: Error details
-
KNAE01165-E
The property definition is invalid (property key: {0}, element: {1}, old value: {2}, new value: {3}).
[Cause]
A property that has a different definition from the imported Service Share Property cannot be imported.
[Action]
Revise the property definition, re-create the service template, and then try again.
0: Property key
1: Element Name
2: Old value
3: New value
-
KNAE01166-E
The file size of a preset property definition file in an added preset folder exceeds an upper limit (vendor ID: {0}, service template ID: {1}, version: {2}, file: {3}, maximum-size: {4} KB).
[Action]
Revise the definition so that the file size is at or below the maximum size, and then try again.
0: Vendor ID
1: Service template ID
2: Version
3: File name
4: Maximum size
-
KNAE01167-E
Cannot read the preset property definition file in an added preset folder (vendor ID: {0}, service template ID: {1}, version: {2}, file: {3}).
[Cause]
Cannot access file.
[Action]
Verify the file access permissions, and then try again.
0: Vendor ID
1: Service template ID
2: Version
3: File name
-
KNAE01168-E
The preset property definition file in an added preset folder is invalid (vendor ID: {0}, service template ID: {1}, version: {2}, file: {3}, error details: {4}).
[Cause]
The preset property definition file contains an error.
[Action]
Revise the preset property definition file according to the error details, and then try again.
0: Vendor ID
1: Service template ID
2: Version
3: File name
4: Error details
-
KNAE01169-E
Cannot delete a folder containing a custom UI file (folder: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the folder.
(2) Another program is using the folder or files under the folder.
[Action]
Delete the folder, and then restart the product.
0: Folder path
-
KNAE01170-E
Cannot copy a custom UI file (destination folder: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the folder.
(2) Another program is using the folder or files under the folder.
(3) There is not enough free space on the disk.
[Action]
Confirm the details of the cause, and then restart the product.
0: Folder path
-
KNAE01171-E
The service template cannot use the basic plug-in (vendor ID: {0}, service template ID: {1}, version: {2}).
[Cause]
The current version of the service template does not support the basic plug-in.
[Action]
Use the version of the service template that includes the basic plug-in.
0: Vendor ID
1: Service template ID
2: Version
-
KNAE01172-E
Cannot create the service template.
[Cause]
A value in the service resource file, which is referenced by the service definition file, exceeded the maximum number of characters.
[Action]
Revise the value in the service resource file, which is referenced by a following element in the service definition file, so that the value is within the maximum number of characters for the element, and then package the service template again:
- displayName element
- shortDescription element
-
KNAE01173-E
Cannot import the service template.
[Cause]
A value in the service resource file, which is referenced by the service definition file, exceeded the maximum number of characters.
[Action]
Revise the value in the service resource file, which is referenced by a following element in the service definition file, so that the value is within the maximum number of characters for the element, and then package the service template again:
- displayName element of the service share property
- description element of the service share property
-
KNAE01174-E
Cannot load the basic plug-in (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
[Cause]
The basic plug-in contains an error.
[Action]
Reinstall the product. If the problem persists, collect the log information, and then contact the system administrator.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
-
KNAE01175-E
Cannot import the service template (vendor ID: {0}, service template ID: {1}, service template version: {2}).
[Cause]
An identical development service template already exists.
[Action]
Verify the development service templates.
0: Vendor ID
1: Service template ID
2: Service template version
-
KNAE01176-E
Cannot import the plug-in included in the service template (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
[Cause]
An identical development plug-in already exists.
[Action]
Verify the development plug-ins.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
-
KNAE01177-E
The maximum number of importable plug-ins has been reached.
[Action]
Delete any unnecessary plug-ins.
-
KNAE01200-E
Execution of a service failed.
[Cause]
The specified service has already been deleted.
[Action]
Re-create the service, and then execute it again.
-
KNAE01201-E
Cannot execute a service template because a property is invalid (property key: {0}).
[Cause]
A property, specified during service setup or execution, is invalid.
[Action]
Verify the value of the property.
0: Key of invalid property
-
KNAE01202-E
The execution of a service has failed.
[Cause]
The user does not have the execute permission for the service.
[Action]
Assign the Submit permission or greater to the resource group associated with the service, and then try again.
-
KNAE01203-E
The execution of a service has failed.
[Cause]
A database error occurred during an attempt to execute the service.
[Action]
Confirm the following actions:
(1) Make sure that the database service is running.
(2) If the database service is running, restart it, and then retry the operation.
(3) If the problem persists, collect log information, and then contact a system administrator.
-
KNAE01204-E
The execution of a service failed because a file access error occurred (path: {0}).
[Cause]
Possible causes are as follows:
(1) The user does not have the correct permissions for the file or folder.
(2) There is not enough free space on the disk.
[Action]
Confirm the following, and then try again:
(1) The access permissions for the file or folder
(2) Free space on the disk
0: File path
-
KNAE01205-W
Cannot delete a file during service execution (path: {0}).
[Cause]
The user does not have the correct permissions for the file or folder.
[Action]
Check the access permissions for the file or folder, and then retry the operation.
0: File path
-
KNAE01206-E
The execution of a service has failed (error code: {0}).
[Cause]
Possible causes are as follows:
(1) The task processing engine is not running.
(2) A user authentication error occurred while processing the task engine.
[Action]
Confirm the following, and then try again:
(1) Make sure that all services are running, and then retry the operation.
(2) Make sure that user name and password for the task processing engine are correct, and then retry the operation.
(3) If the problem persists, collect log information, and then contact your system administrator.
0: Task-processing engine return value
-
KNAE01207-E
The execution of a service has failed.
[Cause]
A date specified is either in the past or is out of range for the scheduled execution start date.
[Action]
Confirm the scheduled execution start date, and then retry the operation.
-
KNAE01208-E
The maximum number of services has been reached.
[Action]
Archive one or more tasks, and then retry the operation.
-
KNAE01301-E
A task operation has failed.
[Cause]
The user does not have the execute permission for the task.
[Action]
Assign the Submit or a greater permission level to the resource group associated with the service, and then retry the operation.
-
KNAE01302-E
A task operation has failed.
[Cause]
A database error occurred during a task operation.
[Action]
Confirm the following, and then try again:
(1) Make sure that the database service is running.
(2) If the database service is running, restart it, and then try again.
(3) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01303-E
A task operation has failed (error code: {0}).
[Cause]
Possible causes are as follows:
(1) The task-processing engine is not running.
(2) A user authentication error occurred in relation to the task-processing engine.
[Action]
Perform one of the following operations:
(1) Make sure that all services are running, and then try again.
(2) Make sure that user name and password for the task processing engine are correct, and then try again.
(3) If the problem persists, collect log information, and then contact your system administrator.
0: Task-processing engine return value
-
KNAE01304-E
Cannot suspend a task schedule.
[Cause]
The status of the task does not allow it to be suspended.
[Action]
Make sure that the task status is in Waiting status, and then retry the operation.
-
KNAE01305-E
Cannot resume a task schedule.
[Cause]
The status of the task does not allow it to be resumed.
[Action]
Make sure that the task is in suspended status, and then retry the operation.
-
KNAE01306-E
Cannot stop a task schedule.
[Cause]
The status of the task does not allow its schedule to be stopped.
[Action]
Make sure that the task status is in waiting or suspended status, and then retry the operation.
-
KNAE01307-E
The task cannot be stopped.
[Cause]
The status of the task does not allow its execution to be stopped.
[Action]
Make sure that the task status is In Progress, Waiting Response, or Abnormal Detection status, and then try again.
-
KNAE01308-E
The task details cannot be displayed.
[Cause]
The user does not have the view permission for the task.
[Action]
Assign the Submit or a greater permission level to the resource group associated with the service, and then retry the operation.
-
KNAE01309-E
The task details cannot be displayed.
[Cause]
A database error occurred during an attempt to display task details.
[Action]
Take the following actions:
(1) Make sure that the database service is running.
(2) If the database service is running, restart it, and then retry the operation.
(3) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01310-E
The task details cannot be displayed (error code: {0}).
[Cause]
Possible causes are as follows:
(1) The task-processing engine is not running.
(2) A user authentication error occurred in relation to the task-processing engine.
[Action]
Take the following actions:
(1) Make sure that all services are running, and then retry the operation.
(2) Make sure that user name and password for the task processing engine are correct, and then try again.
(3) If the problem persists, collect log information, and then contact the system administrator.
0: Task-processing engine return value
-
KNAE01311-E
The monitoring of the task processing engine has failed.
[Cause]
Possible causes are as follows:
(1) The task-processing engine is not running.
(2) An attempt to access the database failed.
[Action]
Take the following actions:
(1) Make sure that the database service is running.
(2) If the database service is running, restart it, and then try again.
(3) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01312-E
The monitoring of the task processing engine has failed.
[Cause]
Possible causes are as follows:
(1) The task-processing engine is not running.
(2) A user authentication error occurred in relation to the task-processing engine.
(3) The maximum number of task exceeds the upper limit.
[Action]
Perform one of the following operations:
(1) Make sure that all services are running, and then try again.
(2) Make sure that user name and password for the task processing engine are correct, and then try again.
(3) Archive one or more tasks.
(4) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01315-I
The task completed successfully (task name: {0}).
0: Task name
-
KNAE01317-I
The task is waiting for a response (task name: {0}).
0: Task name
-
KNAE01318-E
The task execution has failed (task name: {0}).
0: Task name
-
KNAE01321-E
A database error occurred (error details: {0}).
0: Err detail
-
KNAE01322-I
The task schedule is canceled (task name: {0}).
0: Task name
-
KNAE01323-E
An error occurred in the task-processing engine (error details: {0}).
0: Err detail
-
KNAE01324-I
The task archival will now start.
-
KNAE01325-I
One or more tasks are archived (archived task names: {0}, archived task IDs: {1}).
0: Archived task names
1: Archived task IDs
-
KNAE01326-E
The task cannot be archived.
[Cause]
A database error occurred during an attempt to archive tasks.
[Action]
Take the following actions:
(1) Make sure that the database service is running.
(2) If the database service is running, restart it, and then try again.
(3) If the problem persists, collect log information, and then contact a system administrator.
-
KNAE01327-E
An error occurred in the task-processing engine (flow name: {0}, error code: {1}).
[Cause]
Possible causes are as follows:
(1) The task-processing engine is not running.
(2) A user authentication error occurred in relation to the task-processing engine.
(3) Another program is using the task.
[Action]
Take the following actions:
(1) Make sure that all services are running.
(2) Make sure that the user name and password for the task processing engine are correct, and then try again.
(3) Stop any other programs using the task.
(4) If the problem persists, collect log information, and then contact the system administrator.
0: Flow name
1: Error code
-
KNAE01328-E
Cannot archive a task.
[Cause]
The status of the task does not allow it to be archived.
[Action]
Wait until the task has finished, or cancel the task, and then retry the operation.
-
KNAE01329-I
The task histories will now be deleted.
-
KNAE01330-I
The task histories are deleted (deleted task history name: {0}, deleted task history ID: {1}).
0: Deleted history name
1: Deleted task history ID
-
KNAE01331-E
The task cannot be archived (task name: {0}).
[Cause]
The user does not have the archive permission for the task.
[Action]
Assign Modify or a greater permission level to the resource group associated with the service, and then retry the operation.
0: Task name
-
KNAE01332-E
The task histories cannot be deleted (task name: {0}).
[Cause]
A database error occurred during an attempt to delete task histories.
[Action]
Take the following actions:
(1) Make sure that the database service is running.
(2) If the database service is running, restart it, and then try again.
(3) If the problem persists, collect log information, and then contact a system administrator.
0: Task name
-
KNAE01333-E
The specified task does not exist.
[Cause]
The specified task has already been deleted.
[Action]
Make sure that the task exists, and then retry the operation.
-
KNAE01334-E
The specified task history does not exist.
[Cause]
The specified history has already been deleted.
[Action]
Make sure that the history exists, and then retry the operation.
-
KNAE01335-E
Cannot delete task histories (task name: {0}).
[Cause]
The user does not have the delete permission for the task history.
[Action]
Assign Modify or a greater permission level to the resource group associated with the service, and then retry the operation.
0: Task name
-
KNAE01336-I
Automatic archiving of tasks and automatic deletion of debug tasks will now start.
-
KNAE01337-I
Automatic archiving of tasks and automatic deletion of debug tasks finished.
-
KNAE01338-I
Automatic deletion of task histories will now start.
-
KNAE01339-I
Automatic deletion of task histories is complete.
-
KNAE01340-E
A database access error occurred.
[Cause]
An attempt to access the database has failed.
[Action]
Take the following actions:
(1) Make sure that the database service is running.
(2) If the database service is running, restart it.
(3) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01341-I
Execution of the task was stopped (user ID: {0}, task ID: {1}, task name: {2}).
0: User ID
1: Task ID
2: Task name
-
KNAE01342-I
The task was forcibly stopped (user ID: {0}, task ID: {1}, task name: {2}).
0: User ID
1: Task ID
2: Task name
-
KNAE01343-I
The task was retried from the failed step (user ID: {0}, task ID: {1}, task name: {2}).
0: User ID
1: Task ID
2: Task name
-
KNAE01344-I
The task was retried from the step after the failed step (user ID: {0}, task ID: {1}, task name: {2}).
0: User ID
1: Task ID
2: Task name
-
KNAE01345-I
Execution of the debug task started (task ID: {0}, task name: {1}, resource group name: {2}, stop setting: {3}).
0: Task ID
1: Task name
2: Resource group name
3: Stop setting
-
KNAE01346-I
The debug task was deleted (task name of deleted task: {0}, task ID of deleted task: {1}).
0: Deleted debug task names
1: Deleted debug task IDs
-
KNAE01347-I
The task completed successfully (task ID: {0}, task name: {1}, start time: {2}, end time: {3}).
0: Task ID
1: Task name
2: Start time
3: End time
-
KNAE01348-I
The task execution has failed (task ID: {0}, task name: {1}, start time: {2}, end time: {3}).
0: Task ID
1: Task name
2: Start time
3: End time
-
KNAE01349-I
The task schedule is canceled (task ID: {0}, task name: {1}).
0: Task ID
1: Task name
-
KNAE01350-I
The task is waiting for a response (task ID: {0}, task name: {1}).
0: Task ID
1: Task name
-
KNAE01501-E
Issuing of a JP1 event failed.
[Cause]
An attempt to access the database has failed.
[Action]
Take the following actions:
(1) Make sure that the database service is running.
(2) If the database service is running, restart it, and then try again.
(3) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01502-E
Issuing of a JP1 event failed (task name: {0}).
[Cause]
Possible causes are as follows:
(1) The task has already been archived.
(2) An attempt to access the database has failed.
0: Task name
-
KNAE01511-E
Cannot send an email.
[Cause]
An attempt to access the database has failed.
[Action]
Take the following actions:
(1) Make sure that the database service is running.
(2) If the database service is running, restart it, and then try again.
(3) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01512-E
Cannot send an email.
[Cause]
Possible causes are as follows:
(1) The task has already been archived.
(2) An attempt to access the database has failed.
0: Task name
-
KNAE01514-E
Cannot send an email.
[Cause]
Possible causes are as follows:
(1) The Service Share Property contains an error.
(2) An attempt to connect to the SMTP server failed.
[Action]
Confirm the following:
(1) The Service Share Property settings for your SMTP server
(2) If the SMTP server is working properly.
-
KNAE01601-E
Common Component was not found.
[Cause]
The system could not acquire the Common Component installation folder.
[Action]
Collect log information, and then contact your system administrator.
-
KNAE01602-E
The task-processing engine installation folder was not found.
[Cause]
The system could not acquire the installation folder for the task-processing engine.
[Action]
Make sure that the installation path of the task processing engine specified in the user configuration property file is correct. If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01603-E
An unexpected error has occurred.
[Action]
Collect the log information, and then contact your system administrator (maintenance information: {0}).
0: Maintenance information
-
KNAE01604-E
A database access error occurred.
[Cause]
The database is not running properly.
[Action]
Take the following actions:
(1) Make sure that the database service is running.
(2) If the database service is running, restart it, and then retry the operation.
(3) If the problem persists, collect log information, and then contact your system administrator.
-
KNAE01605-E
Command execution has failed (path: {0}).
[Cause]
The user attempted to execute a command that does not exist.
[Action]
Take the following actions:
(1) Make sure that install path of the task processing engine specified in the user configuration property file is correct.
(2) Make sure that the command exists.
(3) If the problem persists, collect log information, and then contact your system administrator.
0: File path
-
KNAE01606-E
An unexpected error has occurred.
[Action]
Collect the log information, and then contact your system administrator (maintenance information: {0}).
0: Maintenance information
-
KNAE01607-E
Cannot access a file or folder.
[Action]
Check the access permissions allowed on the specified file or folder, and then retry the operation.
-
KNAE01608-E
The connection destination definition cannot be created.
[Cause]
The IP address format is not valid.
[Action]
Revise the IP address format.
-
KNAE01609-E
The connection destination definition cannot be created.
[Cause]
The user does not have the correct permission for the connection destination definition.
[Action]
Assign the Admin permission to the resource group associated with the connection destination definition, and then retry the operation.
-
KNAE01610-E
The resource group cannot be accessed.
[Cause]
The user does not have the correct permission for the resource group.
[Action]
Check the following:
- Check whether the user can access the resource group.
- Assign the appropriate permission required to access the resource group.
-
KNAE01611-E
The connection destination definition cannot be deleted.
[Cause]
The user does not have the correct permission required to delete the connection destination definition.
[Action]
Assign the Admin permission to the resource group associated with the connection destination definition, and then retry the operation.
-
KNAE01612-E
The connection destination definition cannot be deleted.
[Cause]
The maximum number of connection destination definitions has already been created.
[Action]
Delete unnecessary connection destination definitions, and retry the operation.
-
KNAE01614-E
The connection destination definition cannot be deleted.
[Cause]
The host format does not match the regular expression.
[Action]
Revise the host format.
-
KNAE01615-E
Cannot apply the URL query parameter (vendor ID: {0}, service template ID: {1}, version: {2}, error details: {3}).
[Cause]
The URL query parameter is invalid.
[Action]
Revise the URL query parameter according to the error details, and then try again.
0: Vendor ID
1: Service template ID
2: Version
3: Error details
-
KNAE01635-E
The operation was stopped because the server is not running.
[Action]
Start the server, and then try the operation again.
-
KNAE01701-E
The specified plug-in does not exist (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
[Action]
Verify that the specified plug-in exists. If the problem persists, collect log information, and then contact the system administrator.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
-
KNAE01702-E
Cannot add plug-in (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
[Cause]
An identical plug-in already exists.
[Action]
Change the vendor ID, plug-in ID, or plug-in version, and then try again.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
-
KNAE01703-E
Cannot add plug-in (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
[Cause]
Too many plug-ins.
[Action]
Delete any unnecessary plug-ins.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
-
KNAE01704-E
Cannot delete plug-in (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
[Cause]
The specified plug-in was already deleted.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
-
KNAE01705-E
The specified plug-in cannot be deleted, because it is used by a service template (vendor ID of the plug-in: {0}, plug-in ID: {1}, plug-in version: {2}, vendor ID of the service template: {3}, service template ID: {4}, service template version: {5}).
[Action]
Make sure that the plug-in is not used by any service template, and then try again.
0: The vendor ID of the plug-in
1: The plug-in ID
2: The plug-in version
3: The vendor ID of the service template
4: The service template ID
5: The service template version
-
KNAE01706-W
A plug-in name displayed in the editor exceeds the maximum number of characters and was truncated (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, locale: {3}, maximum number of characters: {4}, number of characters before truncating: {5}, value before truncating: {6}).
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Locale
4: Maximum number of characters
5: Number of characters before truncating
6: Value before truncating
-
KNAE01707-W
A plug-in vendor name displayed in the editor exceeds the maximum number of characters and was truncated (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, locale: {3}, maximum number of characters: {4}, number of characters before truncating: {5}, value before truncating: {6}).
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Locale
4: Maximum number of characters
5: Number of characters before truncating
6: Value before truncating
-
KNAE01708-W
A plug-in description displayed in the editor exceeds the maximum number of characters and was truncated (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, locale: {3}, maximum number of characters: {4}, number of characters before truncating: {5}, value before truncating: {6}).
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Locale
4: Maximum number of characters
5: Number of characters before truncating
6: Value before truncating
-
KNAE01709-E
Cannot save the plug-in (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
[Cause]
The script file may have been renamed or deleted (platform: {3}, file name: {4}).
[Action]
Check the script file settings, and then try again.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Platform
4: File name
-
KNAE01710-E
Cannot save the plug-in (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
[Cause]
The icon file may have been deleted (file name: {3}).
[Action]
Check the icon file settings, and then try again.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: File name
-
KNAE01711-I
The plug-in was added (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
0: Vendor ID
1: Plug-in ID
2: Plug-in version
-
KNAE01712-I
The plug-in was saved (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
0: Vendor ID
1: Plug-in ID
2: Plug-in version
-
KNAE01713-I
The plug-in was duplicated (source vendor ID: {0}, source plug-in ID: {1}, source plug-in version: {2}, destination vendor ID: {3}, destination plug-in ID: {4}, destination plug-in version: {5}).
0: Source vendor ID
1: Source plug-in ID
2: Source plug-in version
3: Destination vendor ID
4: Destination plug-in ID
5: Destination plug-in version
-
KNAE01714-I
The plug-in was deleted (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}).
0: Vendor ID
1: Plug-in ID
2: Plug-in version
-
KNAE01715-I
The plug-in resource file was saved (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, language: {3}).
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Language code
-
KNAE01751-E
The specified service template does not exist (vendor ID: {0}, service template ID: {1}, service template version: {2}).
[Action]
Verify that the specified service template exists, and then try again. If the problem persists, collect log information, and then contact the system administrator.
0: Vendor ID
1: Service template ID
2: Service template version
-
KNAE01752-E
Cannot add the service template (vendor ID: {0}, service template ID: {1}, service template version: {2}).
[Cause]
An identical service template already exists.
[Action]
Change the vendor ID, service template ID, or service template version, and then try again.
0: Vendor ID
1: Service template ID
2: Service template version
-
KNAE01753-E
Cannot add the service template (vendor ID: {0}, service template ID: {1}, service template version: {2}).
[Cause]
Too many service templates.
[Action]
Delete any unnecessary service templates, and then try again.
0: Service template vendor ID
1: Service template ID
2: Service template version
-
KNAE01754-E
Cannot delete a service template (vendor ID: {0}, service template ID: {1}, service template version: {2}).
[Cause]
The specified service template was already deleted.
0: Vendor ID
1: Service template ID
2: Service template version
-
KNAE01755-W
A service template name displayed in the editor exceeds the maximum number of characters and was truncated (locale: {0}, maximum number of characters: {1}, number of characters before truncating: {2}, value before truncating: {3}).
0: Locale
1: Maximum number of characters
2: Number of characters before truncating
3: Value before truncating
-
KNAE01756-W
The vendor name displayed in the editor exceeds the maximum number of characters and was truncated (locale: {0}, maximum number of characters: {1}, number of characters before truncating: {2}, value before truncating: {3}).
0: Locale
1: Maximum number of characters
2: Number of characters before truncating
3: Value before truncating
-
KNAE01757-W
A service template description displayed in the editor exceeds the maximum number of characters and was truncated (locale: {0}, maximum number of characters: {1}, number of characters before truncating: {2}, value before truncating: {3}).
0: Locale
1: Maximum number of characters
2: Number of characters before truncating
3: Value before truncating
-
KNAE01758-W
A service template name displayed in the editor exceeds the maximum number of characters and was truncated (vendor ID: {0}, service template ID: {1}, service template version: {2}, locale: {3}, maximum number of characters: {4}, number of characters before truncating: {5}, value before truncating: {6}).
0: Vendor ID
1: Service template ID
2: Service template version
3: Locale
4: Maximum number of characters
5: Number of characters before truncating
6: Value before truncating
-
KNAE01759-W
The vendor name for a service template displayed in the editor exceeds the maximum number of characters and was truncated (vendor ID: {0}, service template ID: {1}, service template version: {2}, locale: {3}, maximum number of characters: {4}, number of characters before truncating: {5}, value before truncating: {6}).
0: Vendor ID
1: Service template ID
2: Service template version
3: Locale
4: Maximum number of characters
5: Number of characters before truncating
6: Value before truncating
-
KNAE01760-W
The service template description displayed in the editor exceeds the maximum number of characters and was truncated (vendor ID: {0}, service template ID: {1}, service template version: {2}, locale: {3}, maximum number of characters: {4}, number of characters before truncating: {5}, value before truncating: {6}).
0: Vendor ID
1: Service template ID
2: Service template version
3: Locale
4: Maximum number of characters
5: Number of characters before truncating
6: Value before truncating
-
KNAE01761-E
Cannot save the service template (vendor ID: {0}, service template ID: {1}, service template version: {2}).
[Cause]
The custom file name may have been changed or deleted (platform: {3}, file name: {4}).
[Action]
Verify the custom file settings, and then try again.
0: Vendor ID
1: Service-template ID
2: Service-template version
3: File name
-
KNAE01762-I
The service template was added (vendor ID: {0}, service template ID: {1}, service template version: {2}).
0: Vendor ID
1: Service-template ID
2: Service-template version
-
KNAE01763-I
The service template was saved (vendor ID: {0}, service template ID: {1}, service template version: {2}).
0: Vendor ID
1: Service-template ID
2: Service-template version
-
KNAE01764-I
The service template was duplicated (source vendor ID: {0}, source service template ID: {1}, source service template version: {2}, destination vendor ID: {3}, destination service template ID: {4}, destination service template version: {5}).
0: Source vendor ID
1: Source service-template ID
2: Source service-template version
3: Destination vendor ID
4: Destination service-template ID
5: Destination service-template version
-
KNAE01765-I
The service template was deleted (vendor ID: {0}, service template ID: {1}, service template version: {2}).
0: Vendor ID
1: Service-template ID
2: Service-template version
-
KNAE01766-I
The service resource file was saved (vendor ID: {0}, service template ID: {1}, service template version: {2}, language: {3}).
0: Vendor ID
1: Service-template ID
2: Service-template version
3: Language code
-
KNAE01767-I
The service template flow includes a setting that cannot be converted. The value of this setting will be passed on when the service template is built or released (vendor ID: {0}, service template ID: {1}, service template version: {2}, step name: {3}, element: {4}, value of setting: {5}).
0: Vendor ID
1: Service-template ID
2: Service-template version
3: Language code
-
KNAE01768-I
The service template flow includes a setting that cannot be converted. The value of this setting will be ignored (vendor ID: {0}, service template ID: {1}, service template version: {2}, step name: {3}, element: {4}, value of setting: {5}).
0: Vendor ID
1: Service-template ID
2: Service-template version
3: Step name
4: Element
5: Value of setting
-
KNAE01801-E
The step mapping definition is invalid (step name: {0}).
[Cause]
The properties of the step do not match those of the plug-in.
[Action]
Revise the properties of the step and plug-in as necessary.
0: Step name
-
KNAE01804-E
The step mapping definition is invalid (step name: {0}).
[Action]
Specify mapping parameters for the required properties (step property name: {1}).
0: Step name
1: Step property name
-
KNAE01805-E
The step mapping definition is invalid (step name: {0}).
[Action]
Revise the I/O type of the reserved property set for the mapping parameter so that it matches the I/O type of the step property (step property name: {1}, mapping parameter: {2}, reserved property: {3}, I/O type: {4}).
0: Step name
1: Step property name
2: Mapping parameter
3: Reserved property name
4: I/O type of reserved property
-
KNAE01806-E
The step mapping definition is invalid (step name: {0}).
[Action]
Use the reserved property set for the mapping parameter at the step in the flow executed by the Repeated Execution Plug-in (step property name: {1}, mapping parameter: {2}, reserved property name: {3}).
0: Step name
1: Step property name
2: Mapping parameter
3: Reserved property name
-
KNAE01807-E
The step mapping definition is invalid (step name: {0}).
[Action]
Specify a service property set for the mapping parameter (step property name: {1}, mapping parameter: {2}, service property key: {3}).
0: Step name
1: Step property name
2: Mapping parameter
3: Service property key
-
KNAE01808-E
The step mapping definition is invalid (step name: {0}).
[Action]
Revise the I/O type of the service property set for the mapping parameter so that it matches the I/O type of the step property (step property name: {1}, mapping parameter: {2}, reserved property: {3}, I/O type: {4}).
0: Step name
1: Step property name
2: Mapping parameter
3: Service property name
4: I/O type of service property
-
KNAE01809-E
A custom file is invalid (file name: {0}).
[Action]
Verify that the service details window file exists among the archived files (file path: {1}).
0: File name of the custom file
1: Relative path of the service details window file
-
KNAE01811-E
The definition of a service property is invalid (service property key: {0}).
[Action]
Revise the data type of the specified shared service property so that it matches that of the registered shared service property (specified data type: {1}, registered data type: {2}).
0: Service property key
1: Specified data type
2: Registered data type
-
KNAE01812-E
The definition of a service property is invalid (service property key: {0}).
[Action]
Revise the I/O type of the specified shared service property so that it matches that of the registered shared service property (specified I/O type: {1}, registered I/O type: {2}).
0: Service property key
1: Specified I/O type
2: Registered I/O type
-
KNAE01813-E
The definition of a service property is invalid (service property key: {0}).
[Action]
Revise the visibility of the specified shared service property so that it matches that of the registered shared service property (specified visibility: {1}, registered visibility: {2}).
0: Service property key
1: Specified visibility
2: Registered visibility
-
KNAE01814-E
The definition of a service property is invalid (service property key: {0}).
[Action]
Revise the mandatory section of the specified shared service property so that it matches that of the registered shared service property (specified mandatory section: {1}, registered mandatory section: {2}).
0: Service property key
1: Specified mandatory section
2: Registered mandatory section
-
KNAE01815-E
The definition of a service property is invalid (service property key: {0}).
[Action]
Revise the minimum length of the specified shared service property so that it matches that of the registered shared service property (specified minimum length: {1}, registered minimum length: {2}).
0: Service property key
1: Specified minimum length
2: Registered minimum length
-
KNAE01816-E
The definition of a service property is invalid (service property key: {0}).
[Action]
Revise the maximum length of the specified shared service property so that it matches that of the registered shared service property (specified maximum length: {1}, registered maximum length: {2}).
0: Service property key
1: Specified maximum length
2: Registered maximum length
-
KNAE01817-E
The definition of a service property is invalid (service property key: {0}).
[Action]
Revise the minimum value of the specified shared service property and so that it matches the registered shared service property (specified minimum value: {1}, registered minimum value: {2}).
0: Service property key
1: Specified minimum value
2: Registered minimum value
-
KNAE01818-E
The definition of a service property is invalid (service property key: {0}).
[Action]
Revise the maximum value of the specified shared service property so that it matches that of the registered shared service property (specified maximum value: {1}, registered maximum value: {2}).
0: Service property key
1: Specified maximum value
2: Registered maximum value
-
KNAE01819-E
The definition of a service property is invalid (service property key: {0}).
[Action]
Revise the input character restriction of the specified shared service property so that it matches the registered shared service property (specified input character restriction: {1}, registered input character restriction: {2}).
0: Service property key
1: Specified input character restriction
2: Registered input character restriction
-
KNAE01820-E
The definition of a service property is invalid (service property key: {0}).
[Action]
Revise the list items of the specified shared service property so that they match those of the registered shared service property (specified list items: {1}, registered list items: {2}).
0: Service property key
1: Specified list items
2: Registered list items
-
KNAE01821-E
The message output process stopped because the maximum number of error messages for the release results was exceeded (maximum number of error messages: {0}).
[Action]
Take action according to the instructions in the message output prior to this message.
0: Maximum number of error messages
-
KNAE01822-E
A custom file is invalid (file name: {0}).
[Action]
Change the format or re-create the archived file.
0: File name
-
KNAE01823-E
A script file is invalid (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, platform: {3}, file name: {4}).
[Action]
Change the format or re-create the archived file.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Platform
4: File name
-
KNAE01824-I
Starting the service template build.
-
KNAE01825-I
Completed the service template build (vendor ID: {0}, service template ID: {1}, service template version: {2}).
0: Vendor ID
1: Service template ID
2: Service template version
-
KNAE01826-E
Cannot build the service template (vendor ID: {0}, service template ID: {1}, service template version: {2}).
[Action]
Take action according to the instructions in the message output prior to this message.
0: Vendor ID
1: Service template ID
2: Service template version
-
KNAE01827-I
Starting the service template release.
-
KNAE01828-I
Completed the service template release (vendor ID: {0}, service template ID: {1}, service template version: {2}).
0: Vendor ID
1: Service template ID
2: Service template version
-
KNAE01829-E
Cannot release the service template (vendor ID: {0}, service template ID: {1}, service template version: {2}).
[Action]
Take action according to the instructions in the message output prior to this message.
0: Vendor ID
1: Service template ID
2: Service template version
-
KNAE01830-I
A service template package was created (file name: {0}).
0: Service-template file name
-
KNAE01831-E
A custom file is invalid (file name: {0}).
[Cause]
Multi-byte characters are included in a folder or file name in the archived file (file path: {1}).
[Action]
Change the folder or file name to remove the multi-byte characters.
0: Custom file name
1: File path in the archived file
-
KNAE01832-E
A script file is invalid (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, platform: {3}, file name: {4}).
[Cause]
Multi-byte characters are included in a folder or file name in the archived file (file path: {1}).
[Action]
Change the folder or file name to remove the multi-byte characters.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Platform
4: Script file name
5: File path in the archived file
-
KNAE01833-E
The contents of the service resource file are invalid (file name: {0}).
[Cause]
Control characters are included in a value specified in the service resource file referenced from the service definition (property key: {1}).
[Action]
Remove the control characters from the specified value.
0: Service resource file name
1: Property key
-
KNAE01834-E
The contents of the service resource file are invalid (file name: {0}).
[Cause]
Surrogate pair characters are included in a value specified in the service resource file referenced from the service definition (property key: {1}).
[Action]
Remove the surrogate pair characters from the specified value.
0: Service resource file name
1: Property key
-
KNAE01835-E
The contents of the service resource file are invalid (file name: {0}).
[Cause]
Too many characters for a value specified in the service resource file referenced from the service definition (property key: {1}, maximum number of characters: {2}, number of characters in the specified value: {3}, specified value: {4}).
[Action]
Reduce the length of the specified value.
0: Service resource file name
1: Property key
2: Maximum number of characters
3: Number of characters in the specified value
4: Specified value
-
KNAE01836-E
The contents of a plug-in resource file are invalid (file name: {0}).
[Cause]
Control characters are included in a value specified in the plug-in resource file referenced from the plug-in definition (property key: {1}).
[Action]
Remove the control characters from the specified value.
0: Plug-in resource file name
1: Property key
-
KNAE01837-E
The contents of a plug-in resource file are invalid (file name: {0}).
[Cause]
Surrogate pair characters are included in a value specified in the plug-in resource file referenced from the plug-in definition (property key: {1}).
[Action]
Remove the surrogate pair characters from the specified value.
0: Plug-in resource file name
1: Property key
-
KNAE01838-E
The contents of a plug-in resource file are invalid (file name: {0}).
[Cause]
Too many characters for a value specified in the plug-in resource file referenced from the plug-in definition (property key: {1}, maximum number of characters: {2}, number of characters in the specified value: {3}, specified value: {4}).
[Action]
Reduce the length of the specified value.
0: Plug-in resource file name
1: Property key
2: Maximum number of characters
3: Number of characters in the specified value
4: Specified value
-
KNAE01839-E
The contents of a plug-in resource file are invalid (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, file name: {3}).
[Cause]
Control characters are included in a value specified in the plug-in resource file referenced from the plug-in definition (property key: {1}).
[Action]
Remove the control characters from the specified value.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Plug-in resource file name
4: Property key
-
KNAE01840-E
The contents of a plug-in resource file are invalid (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, file name: {3}).
[Cause]
Surrogate pair characters are included in a value specified in the plug-in resource file referenced from the plug-in definition (property key: {1}).
[Action]
Remove the surrogate pair characters from the specified value.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Plug-in resource file name
4: Property key
-
KNAE01841-E
The contents of a plug-in resource file are invalid (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, file name: {3}).
[Cause]
Too many characters for a value specified in the plug-in resource file referenced from the plug-in definition (property key: {4}, maximum number of characters: {5}, number of characters in the specified value: {6}, specified value: {7}).
[Action]
Reduce the length of the specified value.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Plug-in resource file name
4: Property key
5: Maximum number of character
6: Number of characters of setting value
7: Setting value
-
KNAE01842-E
The contents of a service resource file are invalid (file name: {0}).
[Action]
Define the property keys and values of the requred items in the service definition (property key: {1}).
0: Service resource file name
1: Property key
-
KNAE01843-E
The contents of a plug-in resource file are invalid (file name: {0}).
[Action]
Define the property keys and values of the required items in the plug-in definition (property key: {1}).
0: Plug-in resource file name
1: Property key
-
KNAE01844-E
The contents of a plug-in resource file are invalid (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, file name: {3}).
[Action]
Define the property keys and values of the required items in the plug-in definition (property key: {4}).
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Plug-in resource file name
4: Property key
-
KNAE01845-E
The step mapping definition is invalid (step name: {0}).
[Action]
Specify values so that the judgment condition is consistent (judgment condition: {1}, condition value 1: {2}, condition value 2: {3}).
0: Step name
1: Judgment condition
2: Condition value 1
3: Condition value 2
-
KNAE01846-E
A custom file is invalid (file name: {0}).
[Action]
Remove the multi-byte characters from the file name.
0: Custom file name
-
KNAE01847-E
A script file is invalid (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, platform: {3}, file name: {4}).
[Action]
Remove the multi-byte characters from the file name.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Platform
4: Script file name
-
KNAE01848-E
A custom file is invalid (file name: {0}).
[Cause]
The file name is too long (maximum number of characters: {0}, current number of characters: {2}).
[Action]
Reduce the length of the file name.
0: Window custom file name
1: Maximum number of characters
2: Current number of characters
-
KNAE01849-E
A script file is invalid (vendor ID: {0}, plug-in version: {1}, product version: {2}, platform: {3}, file name: {4}).
[Cause]
A file name is too long (maximum number of characters: {5}, current number of characters: {6}).
[Action]
Reduce the length of the file name.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Platform
4: Script file name
5: Maximum number of characters
6: Current number of characters
-
KNAE01850-E
A custom file is invalid (file name: {0}).
[Cause]
A path within the archive file is too long (path: {1}, maximum number of characters: {2}, current number of characters: {3}).
[Action]
Change the folder name or file name.
0: Window custom file name
1: Path within the archive file
2: Maximum number of characters
3: Current number of characters
-
KNAE01851-E
A script file is invalid (vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, platform: {3}, file name: {4}).
[Cause]
A path within the archive file is too long (path: {5}, maximum number of characters: {6}, current number of characters: {7}).
[Action]
Change the folder name or file name.
0: Vendor ID
1: Plug-in ID
2: Plug-in version
3: Platform
4: Script file name
5: Path within the archive file
6: Maximum number of characters
7: Current number of characters
-
KNAE01852-E
The combination of the plug-in vendor ID, plug-in ID, and script file name is invalid (plug-in vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, platform: {3}, file name: {4}).
[Cause]
The combined length of the plug-in vendor ID, plug-in ID, and script file name is too long (maximum number of characters: {5}, current total number of characters: {6}).
[Action]
Either change the script file name, or duplicate the plug-in and then change the vendor ID and plug-in ID.
0: Plug-in vendor ID
1: Plug-in ID
2: Plug-in version
3: Platform
4: Script file name
5: Maximum number of characters
6: Current total number of characters
-
KNAE01853-E
The combination of the plug-in vendor ID, plug-in ID, and script file name is invalid (plug-in vendor ID: {0}, plug-in ID: {1}, plug-in version: {2}, platform: {3}, file name: {4}, path: {5}).
[Cause]
The combined length of the plug-in vendor ID, the plug-in ID, and the script file path within the archive file is too long (maximum number of characters: {5}, current total number of characters: {6}).
[Action]
Either change the folder name or script file name within the archive file, or duplicate the plug-in and then change the vendor ID and plug-in ID.
0: Plug-in vendor ID
1: Plug-in ID
2: Plug-in version
3: Platform
4: Script file name
5: Path within the archive file
6: Maximum number of characters
7: Current total number of characters
-
KNAE01854-E
The combination of the service template vendor ID, service template ID, and window custom file name is invalid.
[Cause]
The combined length of the service template vendor ID, the service template ID, and the custom file name is too long (service template vendor ID: {0}, service template ID: {1}, file name: {2}, maximum number of characters: {3}, current total number of characters {4}).
[Action]
Either change the custom file name, or duplicate the service template and then change the vendor ID and service template ID.
0: Service-template vendor ID
1: Service-template ID
2: Window custom file name
3: Maximum number of characters
4: Current total number of characters
-
KNAE01855-E
The combination of the service template vendor ID, service template ID, and custom file name is invalid.
[Cause]
The combined length of the service template vendor ID, the service template ID, and the custom file name within the archive file is too long (service template vendor ID: {0}, service template ID: {1}, file name: {2}, maximum number of characters: {3}, current total number of characters: {4}).
[Action]
Either change the folder name or the custom file name within the archive file, or duplicate the service template and then change the vendor ID and service template ID.
0: Service-template vendor ID
1: Service-template ID
2: Window custom file name
3: Path within the archive file
4: Maximum number of characters
5: Current total number of characters