3.1.1 Messages KNAE00001 through KNAE00999 : Job Management Partner 1/Automatic Operation Messages

KNAE00001-E

Login failed.

[Cause]

You did not enter a correct user ID and password.

[Action]

Enter a valid user ID and password.

KNAE00002-E

Login failed.

[Cause]

You did not enter a correct user ID.

[Action]

Enter a valid user ID.

KNAE00003-E

Login failed.

[Cause]

You did not enter a password.

[Action]

Enter a password.

KNAE00004-E

Login failed.

[Cause]

User authentication failed or the user does not have the required permission to access the specified resource group.

[Action]

Check the following:

- Make sure that the user ID and password are correct.

- Make sure that the permissions to access the resource group are set correctly.

KNAE00005-E

Register a license key.

KNAE00006-E

Cannot register a license key.

[Cause]

The specified license key is invalid or already registered.

[Action]

Register a valid license key.

KNAE00008-Q

Do you want to quit the application?

KNAE00009-Q

Are you sure you want to log out?

KNAE00010-E

Your session is invalid.

[Cause]

You have already logged out.

[Action]

Log in again.

KNAE00011-E

Cannot authenticate user.

[Cause]

Cannot authenticate user or cannot connect with the authentication server.

[Action]

Check the followings:

- Verify that the user ID and password are correct.

- Verify that the authentication server is running and accessible.

KNAE00012-E

Cannot connect to an external authentication server.

[Cause]

The connection to an external authentication server has timed out.

[Action]

Make sure that the external authentication server is running and accessible.

KNAE00014-E

Your license key is invalid.

[Action]

Register a valid license.

KNAE00015-E

Cannot display the specified screen.

[Cause]

Possible causes are:

- The specified service has been deleted.

- The task has been archived or deleted.

- If a response entry window cannot be displayed, a response might have already been received or the task might have timed out while waiting for a response.

[Action]

Check the following:

- Make sure that the specified service exists.

- Make sure that the task exists.

- Check the most recent status of the task.

KNAE00016-E

Login failed.

[Cause]

The trial period has expired. You have exceeded the trial period of the product.

KNAE00017-I

Enter a valid license key.

KNAE00018-E

The server failed to start.

[Action]

Stop and restart the product services, and then refresh the Login window. Try the operation again. If the problem persists, use the data collection tool to collect the necessary data, and contact your system administrator.

KNAE00019-I

The server is starting.

[Action]

Wait a few minutes.

KNAE00020-E

The JP1/Automatic Operation window cannot be displayed.

[Cause]

Adobe Flash Player is not installed, you are using an old version of Flash Player, or your browser is configured in a way that prevents Flash Player from working.

[Action]

Install the prerequisite version of Flash Player as indicated in the release notes, and make sure your browser is configured to allow Flash Player to operate.

KNAE00021-E

Cannot access the specified URL.

[Cause]

Possible causes are:

- A URL query parameter contains a surrogate pair character, or a control character.

- A URL query parameter key contains an invalid character.

- The length of a URL query parameter exceeds 1,024 characters.

[Action]

Make sure that the URL query parameters are valid, and then try again.

KNAE00050-Q

Are you sure you want to log out?

Changes to the service template that you are currently editing will be lost. If necessary, save the service template before logging out.

KNAE00051-Q

Are you sure you want to log out?

The task that is being debugged will be forcibly stopped.

KNAE00109-I

The service has been added. You can now configure the service.

KNAE00111-Q

A required property value was omitted.

This will prevent the service from executing.

Do you want to exit without registering the service?

KNAE00115-E

The service cannot be added.

[Cause]

The service template has not been imported.

[Action]

Import the service template and try again.

KNAE00116-E

The specified service operation failed.

[Cause]

The specified service might have been deleted from the list of services.

[Action]

Make sure that the specified service exists.

KNAE00117-E

Cannot add the specified service.

[Cause]

The number of services {0} added exceeds the number allowed.

[Action]

Delete unnecessary services and try again.

0: Maximum number of services

KNAE00122-E

Cannot delete the service.

[Cause]

A task generated from the specified service {0} exists.

[Action]

Archive all the tasks, and then delete the service.

0: Name of service for deletion

KNAE00123-I

The service was deleted.

KNAE00124-E

The service template information cannot be displayed.

[Cause]

Cannot acquire service template information.

[Action]

Use the data collection tool to collect the necessary data, and then contact the system administrator.

KNAE00125-E

Cannot add a service.

[Cause]

The specified service name is already in use (service name: {0}).

[Action]

Use another service name.

0: Specified service name

KNAE00126-I

The service was registered.

KNAE00128-E

Cannot access the specified service template.

[Cause]

The specified service template might have been deleted from the list of service templates.

[Action]

Open the screen again and look for the specified service template.

KNAE00129-Q

The value of the service share property ({0}) was changed.

If you change the value of the service share property, the new value applies to every service that uses that property.

Are you sure you want to continue?

0: Service share property name

KNAE00130-I

The preset property value was applied.

KNAE00131-E

The preset property could not be applied (preset name: {0}).

[Cause]

The specified service or preset property definition file might have been deleted.

[Action]

Cancel the operation and make sure that the specified service or property definition file exists, and then retry the operation.

0: Preset name

KNAE00132-E

The preset property could not be applied (preset name: {0}).

[Cause]

The preset property definition file is invalid.

[Action]

Contact the system administrator and make sure that the preset property definition file is valid.

0: Preset name

KNAE00133-E

Cannot apply the URL query parameter (query parameter: {0}). The service defaults were applied to all values.

[Cause]

Possible causes are:

- A value is not specified.

- The number of characters exceeds the maximum.

- The input value contains a control character.

- An invalid value is specified.

- An invalid property key is specified.

[Action]

Verify that the URL query parameters are valid, and then try again.

0: Query parameter

KNAE00201-I

The Task was archived ({0}).

- Automatic archiving:

0: Auto

- Manual archiving:

0: Manual

KNAE00203-I

The Task was stopped.

KNAE00204-I

Task scheduling was suspended.

KNAE00205-I

Task scheduling was resumed.

KNAE00206-E

Cannot enter a response for the task.

[Cause]

The specified task is not in Waiting for Response status. A response might already have been received, or the task might have timed out while waiting for response.

[Action]

Check the most recent status of the task.

KNAE00207-I

A response was received.

KNAE00208-Q

Are you sure you want to end the operation without responding to the task?

KNAE00210-E

Cannot stop task execution.

[Cause]

The task is not in progress or Waiting for Response, or Abnormal Detection status.

[Action]

Make sure that the task is in progress or Waiting for Response or Abnormal Detection status and then retry the operation.

KNAE00211-E

Cannot suspend the task schedule.

[Cause]

The status of the task is not waiting.

[Action]

Make sure that the task is in Waiting status and then retry the operation.

KNAE00212-E

Cannot resume the task schedule.

[Cause]

The status of the task is not holding.

[Action]

Make sure that the task is in Holding status and then retry the operation.

KNAE00214-E

Cannot cancel the task schedule.

[Cause]

The task is not in Waiting or Holding status.

[Action]

Make sure that the task is in Waiting or Holding status and then retry the operation.

KNAE00215-I

Task scheduling was canceled.

KNAE00216-E

Task log acquisition failed.

[Cause]

Possible causes are:

(1) The specified task log storage location does not exist or cannot be accessed.

(2) There is not enough disk capacity at the specified task log storage location.

(3) The task log does not exist or cannot be accessed.

[Action]

Address the cause of the problem, and then retry the operation.

If the problem persists, use the data collection tool to collect the necessary data, and then contact a system administrator.

KNAE00217-E

The task operation has failed.

[Cause]

The task has already been archived or deleted.

[Action]

Select a node in the service category tree and refresh the screen.

KNAE00218-E

Cannot execute any more services.

[Cause]

The maximum number of tasks ({0}) has reached.

[Action]

Archive unnecessary tasks, and then try again.

0: Maximum number of tasks

KNAE00219-E

Cannot retry from the failed step.

[Cause]

The status of the task is not failed.

[Action]

Make sure that the task is in failed status and then retry the operation.

KNAE00220-E

Cannot retry from the step after the failed step.

[Cause]

The status of the task is not failed.

[Action]

Make sure that the task is in failed status and then retry the operation.

KNAE00221-E

Cannot forcibly stop task execution.

[Cause]

The task is not in progress or Waiting for Response or Abnormal Detection, or Terminated status.

[Action]

Make sure that the task is in progress or Waiting for Response or Abnormal Detection or Terminated status and then retry the operation.

KNAE00223-Q

Are you sure you want to retry the selected task from the failed step?

KNAE00224-Q

Are you sure you want to retry the selected task from step after the failed step?

KNAE00225-I

The task was forcibly stopped.

KNAE00226-I

The task was retried from the failed step.

KNAE00227-I

The task was retried from the step after the failed step.

KNAE00228-E

Cannot delete the task.

[Cause]

Processing for the task is not finished.

[Action]

Check the task status.

KNAE00229-W

The task cannot be displayed, because it is a restored task.

KNAE00230-E

Cannot retry from the failed step.

[Cause]

Submit the service to try again.

[Action]

Execute the service to try again.

KNAE00231-E

Cannot retry from the step after the failed step.

[Cause]

Submit the service to try again.

[Action]

Execute the service to try again.

KNAE00281-I

The task history was deleted ({0}).

- Automatic deletion:

0: Auto

- Manual deletion:

0: Manual

KNAE00301-I

The user group was deleted.

KNAE00306-I

The specified user group has been assigned (user ID: {0}).

0: User ID assigned the user group

KNAE00307-I

The resource group was deleted.

KNAE00308-E

The specified resource group name already exists (resource group name: {0}).

[Action]

Use another resource group name.

0: Specified resource group name

KNAE00310-I

The connection destination was deleted.

KNAE00315-I

The service share property was registered.

KNAE00316-E

Cannot delete the user group (user group name: {0}).

[Cause]

The user group is associated with resource groups from another product.

[Action]

Check the resource groups assigned to the user group.

0: User group name

KNAE00317-E

Cannot obtain the user group information.

[Cause]

An error occurred while performing user management operation.

[Action]

Use the data collection tool to collect the necessary data, and then display the screen again. If the same error occurs, contact your system administrator.

KNAE00318-E

The specified user group was not found.

[Cause]

The specified user group might have been deleted from the user group list.

[Action]

Select the User Groups tab, refresh the User Groups pane, and then retry the operation.

KNAE00319-E

Cannot delete the user group (user group name: {0}).

[Cause]

An error occurred while performing user management operation.

[Action]

Use the data collection tool to collect the necessary data, and then retry the operation. If the same error occurs, contact your system administrator.

0: User group name

KNAE00320-E

A user group with the same name already exists (user group name: {0}).

[Action]

Use another user group name.

0: User group name

KNAE00321-E

Cannot create a user group (user group name: {0}).

[Cause]

An error occurred while performing user management operation.

[Action]

Use the data collection tool to collect the necessary data and then retry the operation. If the same error occurs, contact your system administrator (maintenance information: {1}).

0: User group name

1: Maintenance information

KNAE00322-E

Cannot assign the user to the user group (user group name: {0}).

[Cause]

An error occurred while performing user management operation.

[Action]

Use the data collection tool to collect data. Then, open the edit user group dialog box and try assigning the user to the user group again. If the same error occurs, use the data collection tool to collect the necessary data, and then contact your system administrator (maintenance information: {1}).

0: User group name

1: Maintenance information

KNAE00323-E

Cannot assign the resource group and role to the user group (user group name: {0}).

[Cause]

An error occurred while performing user management operation.

[Action]

Use the data collection tool to collect data and then retry the operation. If the same error occurs, use the data collection tool to collect the necessary data, and then contact a system administrator (maintenance information: {1}).

0: User group name

1: Maintenance information

KNAE00324-E

Cannot assign the resource group and role to the user group (user group name: {0}).

[Cause]

The specified user group or resource group might have been deleted.

[Action]

Cancel the operation and make sure the user group and resource group exist and then retry the operation.

0: User group name

KNAE00325-E

Cannot edit the user group name or description (user group name: {0}).

[Cause]

An error occurred while performing user management operation.

[Action]

Use the data collection tool to collect data and then retry the operation. If the same error occurs, use the data collection tool to collect the necessary data, and then contact your system administrator (maintenance information: {1}).

0: User group name

1: Maintenance information

KNAE00326-E

Cannot assign the user group (user ID: {0}).

[Cause]

An error occurred while performing user management operation.

[Action]

Use the data collection tool to collect data and then retry the operation. If the same error occurs, use the data collection tool to collect the necessary data, and then contact a system administrator (maintenance information: {1}).

0: User ID

1: Maintenance information

KNAE00327-E

Cannot find the specified user information (user ID: {0}).

[Cause]

The user might have been deleted.

[Action]

Select the Users and Permissions window from the Users and Permissions pane of the Administration tab, and then check whether the specified user exists.

0: User ID

KNAE00328-E

Cannot assign the user group (user ID: {0}).

[Cause]

The user group or user might have been deleted.

[Action]

Check whether the specified user group or user exist, and then retry the operation.

0: User ID

KNAE00329-E

Cannot assign or remove a resource group or role to or from the user group (user group name: {0}).

[Cause]

An error occurred while performing user management operation.

[Action]

Use the data collection tool to collect data. From the Administration tab, select User Groups and open the edit user group dialog box and try assigning the resource group to the user group again. If the same error occurs, use the data collection tool to collect the necessary data, and then contact your system administrator (maintenance information: {1}).

0: User group name

1: Maintenance information

KNAE00330-E

Cannot assign or remove a resource group or role to or from the user group (user group name: {0}).

[Cause]

The user group or resource group might have been deleted.

[Action]

Check whether the user group and resource group exist, and then retry the operation.

0: User group name

KNAE00331-E

Cannot assign or remove users to or from the user group (user group name: {0}).

[Cause]

The user group or user might have been deleted.

[Action]

Check whether the user group and user exist, and then try the operation again.

If the same error occurs, use the data collection tool to collect data, and then contact a system administrator (maintenance information: {1}).

0: User group name

1: Maintenance information

KNAE00332-E

Cannot assign users to the specified user group (user group name: {0}).

[Cause]

The user group or user might have been deleted.

[Action]

Check whether the specified user group and user exist, and then try the operation again.

0: User group name

KNAE00334-E

Cannot obtain the relationship information between user groups and resource groups or roles.

[Cause]

An error occurred in a user management operation.

[Action]

Use the data collection tool to collect data. Then, try the operation again. If the same error occurs, use the data collection tool to collect data, and then contact a system administrator.

KNAE00336-E

Cannot obtain the user group information (user group ID: {0}).

[Cause]

An error occurred in a user management operation.

[Action]

Use the data collection tool to collect data and then retry the operation. If the same error occurs, use the data collection tool to collect the necessary data, and then contact your system administrator.

0: User group ID

KNAE00337-E

Cannot obtain the user information.

[Cause]

An error occurred in a user management operation.

[Action]

Use the data collection tool to collect data and then retry the operation. If the same error occurs, use the data collection tool to collect the necessary data, and then contact your system administrator.

KNAE00338-E

Cannot obtain the user information (user group name: {0}).

[Cause]

An error occurred in a user management operation.

[Action]

Use the data collection tool to collect data and then retry the operation. If the same error occurs, use the data collection tool to collect the necessary data, and then contact your system administrator.

0: User group name

KNAE00340-E

Cannot obtain the user group information (user ID: {0}).

[Cause]

An error occurred in a user management operation.

[Action]

Use the data collection tool to collect data and then retry the operation. If the same error occurs, use the data collection tool to collect the necessary data, and then contact your system administrator.

0: User ID

KNAE00341-E

Cannot create a resource group.

[Cause]

An error occurred in a user management operation.

[Action]

Use the data collection tool to collect data and then retry the operation. If the same error occurs, use the data collection tool to collect the necessary data, and then contact your system administrator (maintenance information: {0}).

0: Maintenance information

KNAE00342-E

The resource group was not found.

[Cause]

The resource group might have been deleted.

[Action]

From Administration tab and select the Resource Groups pane, and then refresh the Resource Groups pane.

KNAE00344-E

Cannot delete the resource group (resource group name: {0}).

[Cause]

The specified resource group might contain a service, a task history or connection destination information.

[Action]

Delete any services, task histories and connection destinations currently assigned to the specified resource group.

0: Resource group name

KNAE00345-I

The user group was created (user group name: {0}).

0: Name of created user group

KNAE00346-I

The user group was edited (user group name: {0}).

0: Name of edited user group

KNAE00347-I

The resource group was created.

KNAE00348-I

The resource group was edited.

KNAE00349-I

The connection destination was created.

KNAE00350-I

The connection destination was edited.

KNAE00351-E

The specified connection destination was not found.

[Cause]

The connection destination might have been deleted.

[Action]

From Administration tab, click Connection Destinations to refresh the Connection Destinations pane and check whether the connection destination exists.

KNAE00357-E

Cannot perform the service share property operation.

[Cause]

The specified service share property might have been deleted.

[Action]

From the Administration tab, click Service Share Properties to refresh the Service Share Properties pane and check whether the service share property exists.

KNAE00359-E

Cannot assign the resource group to the connection destination (resource group name: {0}).

[Cause]

The resource group might have been deleted.

[Action]

Check whether the specified resource group exists.

0: Resource group name

KNAE00361-E

You have exceeded the maximum number of connection destination registration.

[Cause]

The maximum number of connection destinations ({0}) has already been registered.

[Action]

Delete unnecessary connection destinations, and then try again.

0: Maximum number of connection destinations

KNAE00363-E

Cannot edit the resource group.

[Cause]

An error occurred in a user management operation.

[Action]

Use the data collection tool to collect data, and then retry the operation. If the same error occurs, use the data collection tool to collect the necessary data, and contact your system administrator (maintenance information: {0}).

0: Maintenance information

KNAE00365-E

Cannot initialize the resource group information.

[Cause]

The database error occurred at the time of initialization of resource group information.

[Action]

Use the data collection tool to collect data, and then restart the product services. Then, retry the operation.

KNAE00366-E

Cannot initialize the resource group information (resource group name: {0}).

[Cause]

A resource group already exists in a database.

[Action]

Check the state of the resource group and retry the operation.

0: Resource group name

KNAE00367-E

Cannot initialize the resource group information.

[Cause]

The error occurred at the time of initialization of resource group information.

[Action]

Use the data collection tool to collect the necessary data, and then restart the product services. If the problem persists, contact your system administrator.

KNAE00368-E

The specified user group name is already in use (user group name: {0}).

[Action]

Specify another user group name.

0: User group name

KNAE00400-E

Cannot execute a step operation.

[Action]

Verify that the plug-in has been deleted.

KNAE00401-Q

No plug-in for selected version exists. Do you want to display a plug-in from a different version?

KNAE00402-Q

Are you sure you want to clear the mapping parameter of the selected property?

KNAE00403-I

The vendor ID and vendor name were deleted because the {0} on the copy source is using the reserved vendor ID.

- For plug-ins:

0: plug-in

- For service templates:

0: service template

KNAE00404-E

Cannot perform the plug-in operation.

[Cause]

The total number of characters in the plug-in ID and the vendor ID exceeds the maximum number of allowed characters (maximum length: {0}, current total number of characters: {1}).

[Action]

Revise the plug-in ID or vendor ID, or both.

0: Maximum number of characters

1: Current total number of characters

KNAE00405-E

Cannot perform the service template operation.

[Cause]

The total number of characters in the service template ID and the vendor ID exceeds the maximum number of allowed characters (maximum length: {0}, current total number of characters: {1}).

[Action]

Revise the service template ID, or vendor ID, or both.

0: Maximum number of characters

1: Current total number of characters

KNAE00406-Q

Are you sure you want to import the definition information from {0}? After importing the definition information, all definition information except for the attachment file will be overwritten, and the attachment file will become empty.

0: The platform

KNAE00410-E

Cannot {0} the plug-in.

[Cause]

The same combination of plug-in ID, plug-in version, and vendor ID has already been registered. Note that alphabetic characters are not case sensitive.

[Action]

Specify a different combination of plug-in ID, plug-in version, and vendor ID.

- Create:

0: create

- Copy:

0: copy

KNAE00411-E

Cannot {0} the plug-in.

[Cause]

Too many plug-ins (maximum {1}).

[Action]

Delete any unnecessary plug-ins.

- Create:

0: create

- Copy:

0: copy

1: Maximum number of plug-ins

KNAE00412-E

Cannot perform the plug-in operation.

[Action]

Verify that the plug-in exists and has not been deleted.

KNAE00413-E

Cannot delete the plug-in.

[Cause]

This plug-in is used as a step in a service template (vendor ID: {0}, service template ID: {1}, service template version: {2}).

[Action]

Delete from all service templates any steps using this plug-in. If a debug version service template has been imported, try the build operation again. To check service templates using this plug-in, see the log file (Server[n].log).

0: Vendor ID

1: Service template ID

2: Service template version

KNAE00414-E

Cannot perform the plug-in operation.

[Action]

Verify that the plug-in has been released.

KNAE00415-E

Cannot perform the plug-in operation.

[Cause]

An icon file may have been deleted.

[Action]

Re-open the Edit Plug-in dialog box to show the latest information.

KNAE00416-E

Cannot perform the plug-in operation.

[Cause]

A script file may have been deleted or the file name may have been changed (platform: {0}, file name: {1}).

[Action]

Re-open the Edit Plug-in dialog box to show the latest information.

0: Platform

1: File name

KNAE00420-E

Cannot perform the service template operation.

[Action]

Re-open the dialog box and verify that the service template has been deleted.

KNAE00421-E

Cannot {0} the service template.

[Cause]

The same combination of service template ID, service template version, and vendor ID has already been registered. Note that alphabetic characters are not case sensitive.

[Action]

Specify a different combination of service template ID, service template version, and vendor ID.

- Create:

0: create

- Copy:

0: copy

KNAE00422-E

Cannot {0} the service template.

[Cause]

Too many service templates (maximum {1}).

[Action]

Delete any unnecessary service templates.

- Create:

0: create

- Copy:

0: copy

1: Maximum number of service templates

KNAE00423-E

Cannot delete the service template.

[Cause]

A debug version task is running (task ID: {0}).

[Action]

Wait for the task to finish, and then try again.

0: Task ID

KNAE00424-E

Cannot perform the service template operation.

[Action]

Make sure that there are sufficient access permissions to perform the operation.

KNAE00425-E

The value entered for {0} is invalid.

[Action]

Revise the syntax of the regular expression.

0: Item name

KNAE00426-E

The default value is invalid.

[Action]

Specify only valid characters.

KNAE00427-E

A step is using a plug-in that may not exist (step name: {0}).

[Action]

Verify that the plug-in has been deleted.

0: Step name (absolute path, starting from the root)

KNAE00428-E

Cannot perform the service template operation.

[Action]

Verify that the service template has been released.

KNAE00429-E

Cannot perform the service template operation.

[Cause]

Custom files may have been deleted or the file name may have been changed (file name: {0}).

[Action]

Re-open the service template editing view to show the latest information.

0: File name

KNAE00431-E

Cannot build the service template at this time.

[Cause]

A task is running (task ID: {0}).

[Action]

Wait for the task to finish, and then try again.

0: Task ID

KNAE00432-E

Cannot release the service template at this time.

[Cause]

A task is running (task ID: {0}).

[Action]

Wait for the task to finish, and then try again.

0: Task ID

KNAE00438-E

Cannot release the service template.

[Action]

Verify that the service template has been released.

KNAE00439-E

Cannot build the service template.

[Action]

Verify that the service template has been released.

KNAE00440-E

The default value is invalid.

[Action]

Specify a numerical value in the range from {0} to {1}.

0: Minimum Value

1: Maximum Value

KNAE00441-E

The default value is invalid.

[Action]

Specify the string in the specify list items.

KNAE00442-E

The values entered for {0} and {1} are invalid.

[Action]

Specify a value for {0} that does not exceed {1}.

0: Minimum Length, or Minimum Value

1: Maximum Length, or Maximum Value

KNAE00443-Q

If you change the Credential Type, the reserved plug-in properties will be removed (properties: {0}). Are you sure you want to change the Credential Type?

0: Property name list

KNAE00444-E

The Credential Type cannot be changed.

[Action]

Reduce the number of properties to {0} orless.

0: Maximum number of properties

KNAE00445-E

The plug-in cannot be saved.

[Action]

Set one or more remote commands.

KNAE00446-E

The default value is invalid.

[Action]

Specify a string that has {0} to {1} characters.

0: Minimum Length

1: Maximum Length

KNAE00447-Q

Are you sure you want to remove the selected {0}?

- For input properties:

0: Input Property

- For output properties:

0: Output Property

- For environment variables:

0: Environment Variable

- For property groups:

0: Property Group

- For variables:

0: Variable

KNAE00448-Q

Are you sure you want to remove the selected {0}?

0: Custom Files

KNAE00449-E

A line in the script exceeds the maximum length of {0} characters.

[Action]

Make sure that no line exceeds the maximum length.

0: Maximum length of a line in the script

KNAE00450-E

A file cannot be uploaded (file name: {0}).

[Action]

Check whether the file to upload exists and whether you have permission to access the file.

0: File name

KNAE00451-E

A file cannot be uploaded (file name: {0}).

[Cause]

Either an empty file was specified, or the file is too big (maximum size: {1} MB).

[Action]

Revise the file.

0: File name

1: Maximum file size

KNAE00452-E

A file cannot be uploaded (file name: {0}).

[Action]

Remove the surrogate pair characters from the file name.

0: File name

KNAE00453-E

A file cannot be downloaded (file name: {0}).

[Cause]

Possible causes are:

(1) Cannot access or find the destination file location.

(2) The destination file location has insufficient free space.

(3) Cannot access or find the source file.

[Action]

Verify the file and the location you are trying to save the file to, and remove the cause of the problem.

0: File name

KNAE00454-Q

If you display the resource settings, the service template will be overwritten. Are you sure you want to open the Set the Service Resources dialog box?

KNAE00455-Q

Are you sure you want to use the selected file to update the resource?

KNAE00456-I

The resource was updated.

KNAE00457-E

The default value is invalid.

[Action]

Specify a date in the range from {0} to {1}.

0: Minimum Value

1: Maximum Value

KNAE00458-E

The file name is invalid.

[Action]

Change the file name to {0}.

0: Resource file name

KNAE00460-I

The plug-in was copied. Next, edit the plug-in.

KNAE00461-Q

Are you sure you want to stop editing the service template? Changes to the service template that you are currently editing will be lost. Save the service template if necessary.

KNAE00462-I

The plug-in was saved.

KNAE00463-E

The size of an icon file is invalid (file name: {0}).

[Cause]

Either an empty file was specified, or the file is too big (maximum size: {1} MB).

[Action]

Revise the icon file.

0: File name

1: Maximum file size

KNAE00464-E

Cannot read an icon file (file name: {0}).

[Cause]

Possible causes are:

(1) The file does not exist.

(2) You do not have permission to access the folder.

(3) Another program is using the folder or the file in the folder.

(4) An invalid icon file was specified.

[Action]

Verify the file and the folder, and remove the cause of the problem.

0: File name

KNAE00465-E

A property that has the same key is already registered (property key: {0}).

[Action]

Change the key of the plug-in's input or output property.

0: Property key specified more than once

KNAE00466-E

An environment variable that has the same name is already registered (variable name: {0}).

[Action]

Change the name of the environment variable.

0: Variable name specified more than once

KNAE00467-Q

Are you sure you want to delete the selected plug-in?

KNAE00468-I

The plug-in was deleted.

KNAE00469-W

At least one input property could not be inserted.

[Cause]

Command line is too long (maximum length: {0}).

[Action]

Make sure that the command line does not exceed the maximum length.

0: Maximum length of the command line

KNAE00470-I

The service template was {0}. Proceed to edit the service template.

- Create:

0: created

- Copy:

0: copied

KNAE00471-E

A step cannot be placed here.

[Action]

Place the step so that the flow view size does not exceed the maximum.

KNAE00472-E

A property with the same key already exists (property key: {0}).

[Action]

Change the key of the service template's input property, output property, variable.

0: Property key specified more than once

KNAE00473-E

A property group with the same property group ID already exists (property group ID: {0}).

[Action]

Change the property group ID.

0: Property group ID specified more than once

KNAE00474-I

The service template was saved.

KNAE00475-Q

Are you sure you want to delete the selected service template?

If you do so, the following processing will be carried out:

- Services added from the debug version of the service template will be deleted, and the tasks executed from those services will be archived.

- The debug task executed from the debug version of the service template will be deleted.

KNAE00476-I

The service template was deleted.

KNAE00477-E

Cannot build the service template.

[Cause]

A mapping parameter is required in an input property.

[Action]

Specify a mapping parameter for the step where the warning appears.

KNAE00478-E

Cannot release the service template.

[Cause]

A mapping parameter is required in an input property.

[Action]

Specify a mapping parameter for the step where the warning appears.

KNAE00479-I

When the file is uploaded, the file name will change to {0}.

0: File name after change

KNAE00480-E

A step cannot be placed here.

[Cause]

A repeated-execution plug-in cannot be specified within a repeated-execution plug-in.

KNAE00481-E

A step cannot be placed here.

[Cause]

Too many steps in the service template (maximum number of steps: {0}).

[Action]

Reduce the number of steps in the service template.

0: Maximum number of steps

KNAE00482-E

A step cannot be placed here.

[Cause]

Too many tiers in the flow (maximum number of tiers: {0}).

[Action]

Reduce the number of tiers in the flow.

0: Maximum number of tiers

KNAE00483-Q

Are you sure you want to delete the selected steps?

KNAE00484-E

A step with the same step ID already exists (property key: {0}).

[Action]

Change the step ID.

0: Step ID specified more than once

KNAE00485-I

The list of properties was updated because the properties of the plug-in to be used were changed.

KNAE00486-E

You cannot specify a value for the warning level that is higher than the value for the judgment level.

[Action]

Revise the warning level and the judgment level.

KNAE00488-E

A step cannot be placed here.

[Cause]

Too many steps in one tier (maximum number of tiers: {0}).

[Action]

Reduce the number of steps in one tier.

0: Maximum number of steps

KNAE00491-Q

Are you sure you want to release the service template?

If you do so, the following processing will be carried out:

- Services added from the debug version of the service template will be deleted, and tasks executed from the service will be archived.

- The debug task executed from the debug version of the service template will be deleted.

- The debug version of the service template will be deleted.

- The release version of the service template will be imported.

- The service template that you are currently editing will be deleted.

After this, you will be unable to edit the service template.

KNAE00492-Q

Are you sure you want to build the service template?

If you do so, the following processing will be carried out:

- Services added from the debug version of the service template will be deleted, and tasks executed from the service will be archived.

- The debug task executed from the debug version of the service template will be deleted.

- The debug version of the imported service template will be deleted and then re-imported.

If building ends normally, you can debug the service template.

KNAE00493-I

The service template editor will close, and the service template editor home view will be displayed.

KNAE00494-E

Cannot upload file (file name: {0}).

[Cause]

The file name contains multi-byte characters.

[Action]

Remove the multi-byte characters from the file name.

0: File name

KNAE00495-E

The size of the image in an icon file is invalid (file name: {0}).

[Action]

Change the size of the image in the icon file to {2}x{1}.

0: File name

1: Vertical size

2: Horizontal size

KNAE00496-E

A file name is invalid.

[Cause]

The file name contains multi-byte characters (file name: {0}).

[Action]

Remove the multi-byte characters from the file name.

0: File name

KNAE00497-E

An input property does not have a property group specified (property name: {0}).

[Action]

If you use a property group in a service template, verify that a property group is set for all input properties.

0: Property name

KNAE00498-E

A property group is not specified in any input properties (property group: {0}).

[Action]

Remove the property group, or set the property group to an input property.

0: Property group name

KNAE00499-E

A file cannot be uploaded (file name: {0}).

[Cause]

The file name is too long (maximum length: {1}).

[Action]

Reduce the length of the file name.

0: File name

1: Maximum file-name length

KNAE00503-E

The specified task operation failed.

[Cause]

The task might have already been deleted.

[Action]

Open the window again.

KNAE00505-E

Cannot submit the debug task.

[Cause]

The specified service template might have been deleted from the list of service templates.

[Action]

After the operation ends, make sure that the service template exists, and then try the operation again.

KNAE00506-E

Cannot submit the debug task.

[Cause]

The specified resource group might have already been deleted.

[Action]

After the operation ends, make sure that the resource group exists, and then try the operation again.

KNAE00507-E

Cannot resume the step.

[Cause]

The task is not Paused or Paused (After Execution) status.

[Action]

Make sure that the task is Paused or Paused (After Execution) status and then retry the operation.

KNAE00508-E

The specified task cannot be resubmitted.

[Cause]

The specified task is the debug task.

KNAE00509-E

Cannot display the specified window.

[Cause]

The specified service is a service for the debug task.

[Action]

Check and, if necessary, revise the query parameter of the URL.

KNAE00510-E

Cannot submit the debug task.

[Cause]

The number of services {0} added exceeds the number allowed.

[Action]

Delete unnecessary services and unnecessary debug tasks, and then try again.

0: Maximum number of services

KNAE00511-E

Cannot submit the debug task.

[Cause]

The specified service name is already being used (service name: {0}).

[Action]

Specify a different service name.

0: The service name that I appointed

KNAE00512-E

Cannot submit the debug task.

[Cause]

The maximum number of tasks was exceeded ({0}).

[Action]

Archive unnecessary tasks and delete unnecessary debug tasks, and then try again.

0: The number of the upper limits of the task

KNAE00513-E

Cannot submit the debug task.

[Cause]

The debug task of the service template for which the operation is to be performed is currently running.

[Action]

Wait for the debug task of the service template for which the operation is to be performed to finish, and then try again.

KNAE00514-E

Cannot submit the debug task.

[Cause]

The service template for which the operation is to be performed was built by another user.

[Action]

End the operation, rebuild the service template, and then try the operation again.

KNAE00554-Q

Are you sure you want to end debugging?

The debug task will be forcibly stopped.

KNAE00555-Q

Are you sure you want to {0} the selected task?

- Forcibly stop task:

0: Forcibly Stop Task

KNAE00556-I

The task was deleted.

KNAE00557-I

The debug window will close, and the service template editor home view will appear.

KNAE00901-E

Cannot obtain the database information.

[Cause]

The database is not running properly.

[Action]

Use the data collection tool to collect data, and then restart the product services. After that, retry the operation. If the problem persists, contact your system administrator (maintenance information: {0}).

0: Exception

KNAE00903-E

Cannot connect to the server.

[Cause]

Possible causes are:

(1) The session is not valid.

(2) The server is not running.

(3) There are not enough resources.

(4) There is a problem with the network.

[Action]

Login again. If you cannot login, restart the server, and then login. If the problem persists, use the data collection tool to collect the necessary data, and then contact your system administrator.

KNAE00904-E

Cannot connect to the server.

[Cause]

Possible causes are:

(1) There is a problem with the network.

(2) The server is overloaded temporarily.

(3) The server is not running.

[Action]

Wait a few minutes and try again.

If the error still occurs, make sure that the server is running.

KNAE00907-E

An unexpected error occurred.

[Action]

Use the data collection tool to collect the necessary data, wait a while, and then try again. If the same error occurs, contact a system administrator (maintenance information: {0}).

0: Maintenance information

KNAE00910-E

A file I/O error occurred.

[Action]

Try the operation again. If the error occurs repeatedly,use the Data Collection Tool to collect the necessary data,and contact your system administrator (maintenance information: {0}).

0: Maintenance information

KNAE00950-I

The online help is not available.

[Action]

Install the help as described in the documentation and then retry the operation.