C.1 Port numbers for JP1/IM
The tables below list the port numbers that JP1/IM uses.
For communication, JP1/IM also uses the port numbers in the range from 1025/tcp to 65535/tcp, which are automatically assigned by the OS. The range of automatically assigned port numbers, however, might vary depending on the OS.
|
Service name |
Port number |
IM-V |
IM-M |
Description |
|---|---|---|---|---|
|
jp1imevtcon |
20115/tcp |
Y |
Y |
Used to connect to JP1/IM - Manager (event console service) from JP1/IM - View |
|
jp1imcmda |
20238/tcp |
Y |
-- |
Used to execute commands from JP1/IM - View |
|
jp1imcss |
20305/tcp |
Y |
Y |
Used to connect to JP1/IM - Manager (Central Scope service) from JP1/IM - View |
|
JP1/IM-Manager DB Server |
20700/tcp# |
-- |
Y |
Used for internal processing by JP1/IM - Manager (IM database) |
|
jp1imcf |
20702/tcp |
Y |
Y |
Used to connect to JP1/IM - Manager (IM Configuration Management service) from JP1/IM - View |
|
jp1imfcs |
20701/tcp |
-- |
Y |
Used for internal processing by JP1/IM - Manager (event base service) |
|
jp1imegs |
20383/tcp |
-- |
Y |
Used for internal processing by JP1/IM - Manager (event generation service) |
|
jp1rmregistry |
20380/tcp |
Y |
-- |
Used to connect to JP1/IM - Rule Operation from JP1/IM - View |
|
jp1rmobject |
20381/tcp |
Y |
-- |
- Legend:
-
IM-V: JP1/IM - View
IM-M: JP1/IM - Manager
Y: Registered in the services file at installation.
--: Not registered in the services file at installation (and does not need to be set).
#: The port number used by the JP1/IM-Manager DB Server is not registered in the services file. The port number increases with each logical host configured in the system. The default is 20700/tcp. The port number of the IM database is set in the setup information file. For details, see Setup information file (jimdbsetupinfo.conf) in 2. Definition Files in the manual Job Management Partner 1/Integrated Management - Manager Command and Definition File Reference.
The Web-based JP1/IM - View uses the port numbers shown in the following table.
|
Service name |
Port number |
Description |
|---|---|---|
|
http |
80/tcp# |
Used to connect to the Web server (to download console.html from JP1/IM - Manager) |
|
jp1imevtcon |
20115/tcp |
Used to connect to JP1/IM - Manager (event console service) from the Web-based JP1/IM - View (through a Web browser) |
#: The port number may differ depending on the Web server settings.
Remotely monitored hosts use the port numbers shown in the following table.
|
Remotely monitored host |
Port number |
|---|---|
|
Remote-monitoring log file trap (SSH connection) |
Port number specified in the System Common Settings window of IM Configuration Management |
|
Remote-monitoring log file trap (NetBIOS [NetBIOS over TCP/IP]) connection |
137/udp, 137/tcp, 138/udp, 139/tcp |
|
Remote-monitoring log file trap (WMI connection) |
135/tcp and dynamic port numbers that are automatically assigned as needed# |
#: WMI uses DCOM, and DCOM uses dynamic port allocation. Therefore, set the ports to be used by DCOM so that the lines connected to the ports pass through a firewall.
Standard ranges of the port numbers that are assigned by individual OSs are as follows:
-
Windows Server 2003: 1025 to 5000
-
Windows Server 2008 or Windows Server 2012: 49152 to 65535