![[Contents]](FIGURE/CONTENT.GIF)
Job Management Partner 1/Software Distribution Description and Planning Guide
![[Glossary]](FIGURE/GLOSS.GIF)
![[Index]](FIGURE/INDEX.GIF)
![[Back]](FIGURE/FRONT.GIF)
![[Next]](FIGURE/AFTER.GIF)
The system configuration required for using the remote control facility consists of the local system (Remote Control Manager) and the remote system (Remote Control Agent).
You can install the Remote Control Manager and Remote Control Agent on a PC on which other JP1/Software Distribution facilities, such as a client or a managing server, are installed. You can also install the Remote Control Manager on a PC that is not used as the managing server or a relay manager/system. If you are using the remote control facility only, you can use JP1/Remote Control.
The following table lists the operating environment for remote control.
Table 1-2 Operating environment for remote control
| Program | Remote Control Manager | Remote Control Agent | Operating environment |
|---|---|---|---|
| JP1/Software Distribution Manager (central manager) | Y | N |
|
| JP1/Software Distribution Manager (relay manager) | Y | Y |
|
| JP1/Software Distribution Client (relay system) | N | Y |
|
| JP1/Software Distribution Client (client) | N | Y | Windows |
The following figure shows the system configuration required for using the remote control facility.
Figure 1-26 System configuration required for using the remote control facility
![[Figure]](FIGURE/GAI0230.GIF)
All Rights Reserved. Copyright (C) 2009, 2013, Hitachi, Ltd.
Copyright, patent, trademark, and other intellectual property rights related to the "TMEng.dll" file are owned exclusively by Trend Micro Incorporated.