Job Management Partner 1/Automatic Job Management System 3 System Design (Configuration) Guide

4.3.4 Environment settings for JP1/AJS3 Console

This subsection describes the environment settings related to JP1/AJS3 - Console.

For details about performing these settings, see 4.2 Environment setting parameter settings in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for Windows systems) or 13.2 Environment setting parameter settings in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for UNIX systems).

For details about specific settings (environment setting parameters), see 2.8 Setting up the JP1/AJS3 Console environment in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.

Determine the environment settings for JP1/AJS3 - Console, referring to the recommended values and setting criteria given in the following tables.

Organization of this subsection

(1) Environment settings for JP1/AJS3 Console Manager

(2) Environment settings for JP1/AJS3 Console Agent

(1) Environment settings for JP1/AJS3 Console Manager

Set values in the JP1/AJS3 Console Manager environment definition file (ajs2cm.conf).

Table 4-10 JP1/AJS3 Console Manager settings (ajs2cm.conf)

Setting description and parameter Criterion for changing the setting Recommended value When the setting takes effect

Maximum session count

MAXSESSION

If the maximum number of connections from JP1/AJS3 Console View is likely to exceed 16, increase the value accordingly. If there are resource constraints and you need to limit JP1/AJS3 - Console View connections, reduce the value. Use the default (16). When the JP1/AJS3 Console Manager service is restarted

Timeout for remote communication

IPC_TIMEOUT

Specify a non-zero value if you want to explicitly specify a timeout period different from the OS timeout (unit: seconds). Use the default (0). When the JP1/AJS3 Console Manager service is restarted

Retry interval

IPCRETRYINTERVAL

Change this parameter, and the retry count value, according to the communication error status (unit: seconds). Use the default (1). When the JP1/AJS3 Console Manager service is restarted

Retry count

IPCRETRYCOUNT

Change this parameter, and the retry interval value, according to the communication error status. Use the default (3). When the JP1/AJS3 Console Manager service is restarted

Connection timeout

SESSIONTIMEOUT

No particular criteria (unit: minutes). Use the default (120). When the JP1/AJS3 Console Manager service is restarted

Severity level of messages output to the integrated trace log

HNTRLOGLEVEL

Specify this parameter if you want to output more detailed information to the integrated trace log. Use the default. When the JP1/AJS3 Console Manager service is restarted

Data directory name

DATADIRECTORY

Specify this parameter if you want to store definition data in a directory other than the default directory. Use the default. When the JP1/AJS3 Console Manager service is restarted

Retry interval for connection to JP1/AJS3 Console Agent

RECONNECTINTERVAL

Specify this parameter if you want to change the retry interval for connecting to the JP1/AJS3 Console Agent to be monitored (unit: seconds). Use the default (300). When the JP1/AJS3 Console Manager service is restarted

Name of the trace log file

TRACELOGFILE

No particular criteria. Use the default. When the JP1/AJS3 Console Manager service is restarted

Timeout for remote connection

IPC_CONNECTTIMEOUT

No particular criteria (seconds). Use the default (20). When the JP1/AJS3 Console Manager service is restarted

Setting description and parameter	Criterion for changing the setting	Recommended value	When the setting takes effect
Maximum session count MAXSESSION	If the maximum number of connections from JP1/AJS3 Console View is likely to exceed 16, increase the value accordingly. If there are resource constraints and you need to limit JP1/AJS3 - Console View connections, reduce the value.	Use the default (16).	When the JP1/AJS3 Console Manager service is restarted
Timeout for remote communication IPC_TIMEOUT	Specify a non-zero value if you want to explicitly specify a timeout period different from the OS timeout (unit: seconds).	Use the default (0).	When the JP1/AJS3 Console Manager service is restarted
Retry interval IPCRETRYINTERVAL	Change this parameter, and the retry count value, according to the communication error status (unit: seconds).	Use the default (1).	When the JP1/AJS3 Console Manager service is restarted
Retry count IPCRETRYCOUNT	Change this parameter, and the retry interval value, according to the communication error status.	Use the default (3).	When the JP1/AJS3 Console Manager service is restarted
Connection timeout SESSIONTIMEOUT	No particular criteria (unit: minutes).	Use the default (120).	When the JP1/AJS3 Console Manager service is restarted
Severity level of messages output to the integrated trace log HNTRLOGLEVEL	Specify this parameter if you want to output more detailed information to the integrated trace log.	Use the default.	When the JP1/AJS3 Console Manager service is restarted
Data directory name DATADIRECTORY	Specify this parameter if you want to store definition data in a directory other than the default directory.	Use the default.	When the JP1/AJS3 Console Manager service is restarted
Retry interval for connection to JP1/AJS3 Console Agent RECONNECTINTERVAL	Specify this parameter if you want to change the retry interval for connecting to the JP1/AJS3 Console Agent to be monitored (unit: seconds).	Use the default (300).	When the JP1/AJS3 Console Manager service is restarted
Name of the trace log file TRACELOGFILE	No particular criteria.	Use the default.	When the JP1/AJS3 Console Manager service is restarted
Timeout for remote connection IPC_CONNECTTIMEOUT	No particular criteria (seconds).	Use the default (20).	When the JP1/AJS3 Console Manager service is restarted

(2) Environment settings for JP1/AJS3 Console Agent

Set values in the JP1/AJS3 Console Agent-environment setting file (ajs2ca.conf).

Table 4-11 JP1/AJS3 Console Agent settings (ajs2ca.conf)

Setting description and parameter Criterion for changing the setting Recommended value When the setting takes effect

Maximum session count

MAXSESSION

If the maximum number of connections from JP1/AJS3 Console Manager is likely to exceed 16, increase the value accordingly. If there are resource constraints and you need to limit JP1/AJS3 - Console Manager connections, reduce the value. Use the default (16). When the JP1/AJS3 Console Agent service is restarted

Severity level of messages output to the integrated trace log

HNTRLOGLEVEL

Specify this parameter if you want to output more detailed information to the integrated trace log. Use the default. When the JP1/AJS3 Console Agent service is restarted

Name of the trace log file

TRACELOGFILE

No particular criteria. Use the default. When the JP1/AJS3 Console Agent service is restarted

Enabling operations from JP1/AJS3 Console View

ENABLEOPERATION

Specify no if you do not want operations on jobnets in the connected host to be performed from JP1/AJS3 Console View. Use the default (yes). When the JP1/AJS3 Console Agent service is restarted

Setting description and parameter	Criterion for changing the setting	Recommended value	When the setting takes effect
Maximum session count MAXSESSION	If the maximum number of connections from JP1/AJS3 Console Manager is likely to exceed 16, increase the value accordingly. If there are resource constraints and you need to limit JP1/AJS3 - Console Manager connections, reduce the value.	Use the default (16).	When the JP1/AJS3 Console Agent service is restarted
Severity level of messages output to the integrated trace log HNTRLOGLEVEL	Specify this parameter if you want to output more detailed information to the integrated trace log.	Use the default.	When the JP1/AJS3 Console Agent service is restarted
Name of the trace log file TRACELOGFILE	No particular criteria.	Use the default.	When the JP1/AJS3 Console Agent service is restarted
Enabling operations from JP1/AJS3 Console View ENABLEOPERATION	Specify no if you do not want operations on jobnets in the connected host to be performed from JP1/AJS3 Console View.	Use the default (yes).	When the JP1/AJS3 Console Agent service is restarted

[Contents][Back][Next]

[Trademarks]