Job Management Partner 1/Base User's Guide

Appendix J.1 Settings for individual products that use JP1/SES events

This section describes how to link JP1/Base with individual products that use JP1/SES events.

Organization of this subsection

(1) Using the JP1/OJE or VOSK data linkage function of VOS1/VOSK

(2) Using VOS3/MVS JP1/OJE

(3) Using HiRDB

(4) Using the ajsevput command

(5) Using the ajsevget command

(1) Using the JP1/OJE or VOSK data linkage function of VOS1/VOSK

(a) Using other clients' products

To use another client's product with the JP1/OJE or VOSK data linkage function on a host running JP1/Base, you must perform the following:
Delete the options v5-unused parameter in the event server settings file (conf). This parameter inhibits V5 compatibility.
Specify a TCP port for the service JP1AutoJob in the services file.
For details on how to do this, see C.1 Port numbers for JP1/Base.
Examples are shown below:
 
JP1AutoJob  5001/tcp  # JP1/AutoJob Event Service
Specify the same number (5001) for the port and the destination.
(b) Using the event sending function

To send events from JP1/OJE on VOS1/VOSK to a host running JP1/Base, specify the same settings as described in (a) Using other clients' products. For a UNIX client, use jesrd as the service specified in the services file.

(c) Using the event receiving function

For JP1/OJE on VOS1/VOSK to receive events from a host running JP1/Base, you must perform the following on the JP1/Base host:

Delete the options v5-unused parameter in the event server settings file (conf). This parameter inhibits V5 compatibility.

In the event server settings file (conf), specify the host name of VOS1/VOSK as the event server name, ses as the communication type for the remote-server parameter.

In the services file, specify a TCP port for the service JP1AutoJob or jesrd.
For details on how to do this, see C.1 Port numbers for JP1/Base.
Examples are shown below:
In Windows:
JP1AutoJob 5001/tcp # JP1/AutoJob Event Service
In UNIX:
jesrd 5001/tcp # JP1/SES remote management server
Specify the same number (5001) for the port and destination.

(2) Using VOS3/MVS JP1/OJE

(a) Using SES communication protocol with products from other clients

When you want to use a JP1/OJE client product on a host running JP1/Base, if the JP1/OJE is specified for SES communication protocol on the VOS3/MVS host that uses the job execution function for the event sending and receiving function, you must specify the same settings as described in (a) Using other clients' products of (1) Using the JP1/OJE or VOSK data linkage function of VOS1/VOSK. These settings are not necessary if the JP1/OJE is specified for IM communication protocol on the VOS3/MVS host, or if the batch job linkage function is used.

V5 compatibility might be discontinued in the future. We recommend migrating to an environment that uses the IM communication protocol, or an environment that uses the batch job linkage function.

(b) Using the event sending function

When you want to send events from JP1/OJE on a VOS3/MVS host to a host running JP1/Base, if the JP1/OJE is specified for SES communication protocol on the VOS3/MVS host, you must specify the same settings as described in (b) Using the event sending function of (1) Using the JP1/OJE or VOSK data linkage function of VOS1/VOSK. These settings are not necessary if the JP1/OJE is specified for the IM communication protocol on the VOS3/MVS host.

V5 compatibility might be discontinued in the future. We recommend migrating to an environment that uses the IM communication protocol.

(c) Using the event receiving function

When you want JP1/OJE on a VOS3/MVS host to receive events from a host running JP1/Base, if JP1/OJE is specified for SES communication protocol on the VOS3/MVS host, you must specify the same settings as described in (c) Using the event receiving function of (1) Using the JP1/OJE or VOSK data linkage function of VOS1/VOSK. These settings are not necessary if the JP1/OJE is specified for IM communication protocol on the VOS3/MVS host.

V5 compatibility might be discontinued in the future. We recommend migrating to an environment that uses the IM communication protocol.

(3) Using HiRDB

(a) Using the event notification function

If the pd_jp1_event_level operand is set to 1, specify the same settings as described in (a) Using other clients' products of (1) Using the JP1/OJE or VOSK data linkage function of VOS1/VOSK. If the pd_jp1_event_level operand is set to 2, these settings are not necessary.

V5 compatibility might be discontinued in the future. If the environment permits it, we recommend setting the pd_jp1_event_level operand to be set to 2.

(4) Using the ajsevput command

Specify the same settings as described in (a) Using other clients' products of (1) Using the JP1/OJE or VOSK data linkage function of VOS1/VOSK.

The ajsevput command might be discontinued in the future. We recommend migrating to an environment that uses the JP1/Base jevsend or jevsendd command.

(5) Using the ajsevget command

Specify the same settings as described in (a) Using other clients' products of (1) Using the JP1/OJE or VOSK data linkage function of VOS1/VOSK.

The ajsevget command might be discontinued in the future. We recommend migrating to an environment utilizing a user program that uses the JP1/Base event acquisition function.

[Contents][Back][Next]

[Trademarks]