Job Management Partner 1/Base User's Guide
Use the ps command in UNIX to check the operation status of a desired process. The system displays the following process names when the processes are operating normally. The value in parentheses in the table indicates the number of processes that can be executed simultaneously.
Parent process name Function Child process name Function hntr2mon (1) Hitachi Network Objectplaza Trace Library (HNTRLib2) -- -- jbs_spmd (1) Process management#1 jbssessionmgr (1)#2 Authentication server#1#5
This process exists only on the host that is set as the authentication server.
The displayed name is jbssessionmgr when the jbs_spmd_status command is executed.jbsroute (1 to 9)#2 Configuration management#1#5
The displayed name is jbsroute when the jbs_spmd_status command is executed.jcocmd (1)#2
jcocmdexe (1)
jcocmdapi (Execute Command window count#3 + 1 (when JP1/IM - Manager is installed))
jcocmdcmc (0 to the command count#4)
jcocmdcom (1)#10Command execution#1#5
The displayed name is jcocmd when the jbs_spmd_status command is executed.jbsplugind (1)#2, #7 Plug-in service#1#5
The displayed name is jbsplugin when the jbs_spmd_status command is executed.jbshcd (1) Health check (for local host monitoring)#1#5
The displayed name is jbshcd when the jbs_spmd_status command is executed.jbshchostd (1) Health check (for remote host monitoring)#1#5
The displayed name is jbshchostd when the jbs_spmd_status command is executed.jbssrvmgr (1) Service management control function#1#5
The displayed name is jbssrvmgr when the jbs_spmd_status command is executed.jbslcact (1) Local action function#1#5
The displayed name is jbslcact when the jbs_spmd_status command is executed.jbscomd.exe (1)
jbscomd_api.exe (1 to 9,999)
jbscomd_ses.exe (1)
jbscomd_snd.exe (1)
jbscomd_rcv.exe (1)Inter-process communication#1#5
The displayed name is jbscomd when the jbs_spmd_status command is executed.jevservice (1) Event service#1#6 jevservice (6 to 9,999)#11 Event service#6 jesdmain (1)#8, #9 For compatibility with JP1/SES#6
This process is generated only on physical hosts.jesrd (6 to 9,999)#9 For compatibility with JP1/SES#6
This process is generated only on physical hosts.jevlogd (1) Log file trap jelparentim
(0 to the number of times the jevlogstart command is executed)Log file trapping
The jelchildim process is generated for each file to be monitored for each jelparentim. When the jevlogstop command is executed, the jelparentim process disappears.imevtgw (1) SNMP trap converter -- SNMP trap converter
This process is generated only when the SNMP trap converter is used.
- Legend:
- --: None
#1: The maximum number of processes that can be executed simultaneously with the indicated process is the calculation result of the following format when multiple logical hosts operate on one physical host in the cluster system or when one logical host and one physical host are started at the same time: (number-of-logical-hosts + 1) x number-of-processes
#2: These processes are important and are the core of JP1/Base. For abnormal termination of these processes, JP1/Base has functionality that automatically restarts the processes if they end abnormally. JP1/Base has other functionality that issues a JP1 event when it detects that a process is abnormal. We recommend that you set up this functionality to minimize the effect on your work if a process stops. For details, see 2.4.2 Setup for handling possible errors in JP1/Base.
#3: The number of Execute Command windows opened by the connected JP1/IM - View. The number of processes increases as the number of open windows increases. When you close an Execute Command window, the corresponding process disappears.
#4: This value is the number of remote commands or automated actions that are executed by JP1/IM. A process is generated for each command. When processing finishes, the process disappears. If you execute commands successively, multiple processes might be generated.
#5: You can use the jbs_spmd_status command to check the status of these processes. If the processes have started normally, the jbs_spmd_status command returns the following information.
- If an authentication server has been set:
jbssessionmgr
jbsroute
jcocmd
jbsplugin
jbshcd
jbshchostd
jbssrvmgr
jbslcact
jbscomd
- If an authentication server has not been set:
jbsroute
jcocmd
jbsplugin
jbshcd
jbshchostd
jbssrvmgr
jbslcact
jbscomd
#6: The status of these processes can be checked with the jevstat command. Executing the jevstat command when the processes are running normally displays the following string:
jevservice
#7: The process name displayed by the ps-el command is jbsplugin.
#8: The process name displayed when you execute the ps command is /var/opt/jp1base/sys/tmp/event/servers/default/jpevent.conf.
#9: This process is started from jevservice, but there is no parent-child relationship between the processes.
#10: This process was added in version 07-51.
#11: If v5-unused is specified for the options parameter in the environment settings file (conf) of the event server, the value is from 5 to 9,999. If v5-unused is not specified, the value is from 6 to 9,999.
All Rights Reserved. Copyright (C) 2009, Hitachi, Ltd.