Job Management Partner 1/Base User's Guide

Preface

This manual describes the functionality and operation of Job Management Partner 1/Base. Note that this is a common manual for each OS. If there are OS-specific differences in usage, the differences are specified in the text. In this manual, Job Management Partner 1 is abbreviated to JP1.

Intended readers

This manual is intended for:

• System administrators who are responsible for introducing, building, and running a system that uses JP1 product that requires JP1/Base such as JP1/Integrated Management, JP1/Automatic Job Management System 2 or 3, or JP1/Power Monitor.
• System administrators who are responsible for introducing and running JP1/Base, such as JP1/Integrated Management, JP1/Automatic Job Management System 2 or 3, JP1/Power Monitor.

Organization of this manual

This manual is organized into the following parts:

PART 1: Overview

This part gives an overview and describes the functionality of JP1/Base.

PART 2: Installation and Setup

This part describes how to install and set up JP1/Base. This part also describes how to operate JP1/Base in a cluster system, or how to set up to operate JP1/Base in multiple networks.

PART 3: Installation and Operation

This part describes how to set up and operate JP1/Base functionality.

PART 4: Reference

This part describes the commands used in JP1/Base, JP1/Base definition files, and events output by JP1/Base.

PART 5: Troubleshooting

This part describes the cause and what to do if a problem occurs while you are using JP1/Base.

Related publications

This manual is part of a related set of manuals. The manuals in the set are listed below (with the manual numbers):

• Job Management Partner 1/Base Messages (3020-3-R72(E))
• Job Management Partner 1/Base Function Reference (3020-3-R73(E))
• Job Management Partner 1/Integrated Management - Manager Quick Reference (3020-3-R75(E))
• Job Management Partner 1/Integrated Management - Manager Overview and System Design Guide (3020-3-R76(E))
• Job Management Partner 1/Integrated Management - Manager Configuration Guide (3020-3-R77(E))
• Job Management Partner 1/Integrated Management - Manager Administration Guide (3020-3-R78(E))
• Job Management Partner 1/Integrated Management - Manager GUI Reference (3020-3-R79(E))
• Job Management Partner 1/Integrated Management - Manager Command and Definition file Reference (3020-3-R80(E))
• Job Management Partner 1/Integrated Management - Manager Messages (3020-3-R81(E))
• Job Management Partner 1/Integrated Management - Rule Operation System Configuration and User's Guide (3020-3-K10(E))
• Job Management Partner 1/Integrated Management - Rule Operation GUI Reference (3020-3-K11(E))
• Job Management Partner 1/Automatic Job Management System 3 Overview (3020-3-S02(E))
• Job Management Partner 1/Automatic Job Management System 3 System Design (Configuration) Guide (3020-3-S03(E))
• Job Management Partner 1/Automatic Job Management System 3 System Design (Work Tasks) Guide (3020-3-S04(E))
• Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (3020-3-S05(E))
• Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 2 (3020-3-S06(E))
• Job Management Partner 1/Automatic Job Management System 3 Administration Guide (3020-3-S07(E))
• Job Management Partner 1/Automatic Job Management System 3 Troubleshooting (3020-3-S08(E))
• Job Management Partner 1/Automatic Job Management System 3 Operator's Guide (3020-3-S09(E))
• Job Management Partner 1/Automatic Job Management System 3 Command Reference 1 (3020-3-S10(E))
• Job Management Partner 1/Automatic Job Management System 3 Command Reference 2 (3020-3-S11(E))
• Job Management Partner 1/Automatic Job Management System 3 Linkage Guide (3020-3-S12(E))
• Job Management Partner 1/Automatic Job Management System 3 Messages 1 (3020-3-S13(E))
• Job Management Partner 1/Automatic Job Management System 3 Messages 2 (3020-3-S14(E))
• Job Management Partner 1/Software Distribution Description and Planning Guide (3020-3-S79(E)), for Windows systems
• Job Management Partner 1/Software Distribution Setup Guide (3020-3-S80(E)), for Windows systems
• Job Management Partner 1/Software Distribution Administrator's Guide Volume 1 (3020-3-S81(E)), for Windows systems
• Job Management Partner 1/Software Distribution Administrator's Guide Volume 2 (3020-3-S82(E)), for Windows systems
• Job Management Partner 1/Software Distribution Client Description and User's Guide (3020-3-S85(E)), for UNIX systems
• Job Management Partner 1/Automatic Job Management System 2 Description (3020-3-K21(E))
• Job Management Partner 1/Automatic Job Management System 2 Planning and Administration Guide (3020-3-K22(E))
• Job Management Partner 1/Automatic Job Management System 2 Setup Guide (3020-3-K23(E))
• Job Management Partner 1/Automatic Job Management System 2 Operator's Guide (3020-3-K24(E))
• Job Management Partner 1/Automatic Job Management System 2 Command Reference (3020-3-K25(E))
• Job Management Partner 1/Automatic Job Management System 2 Linkage Guide (3020-3-K27(E))
• Job Management Partner 1/Automatic Job Management System 2 Messages (3020-3-K28(E))
• Job Management Partner 1/Power Monitor Description, User's Guide and Reference (3020-3-K54(E))
• Job Management Partner 1/Software Distribution Manager Description and Administrator's Guide (3000-3-841(E))
• Job Management Partner 1/Software Distribution SubManager Description and Administrator's Guide (3020-3-L42(E)), for UNIX systems
• Job Management Partner 1/Performance Management/SNMP System Observer Description, Operator's Guide and Reference (3020-3-F69(E))
• VOS3 Job Management Partner 1/Open Job Entry (6190-3-365(E))
• MVS Job Management Partner 1/Open Job Entry Description, User's Guide and Reference (9000-3-365(E))
• OSIV/MSP Job Management Partner 1/Open Job Entry Description, User's Guide and Reference (9000-3-366(E))

JP1/Base manual organization

The JP1/Base documentation is divided into three manuals. Read the manual appropriate to your goals, referring to the content of each manual shown in the following table.

Manual	Content
Job Management Partner 1/Base User's Guide	Overview of JP1/Base functionality Setup of each function Commands, definition files, JP1 events Troubleshooting Processes, port numbers, operational logs
Job Management Partner 1/Base Messages	Messages
Job Management Partner 1/Base Function Reference	Methods for issuing or acquiring JP1 events by using user applications or JP1 programs. Functions

Conventions: Abbreviations

This manual uses the following abbreviations for product names:

Abbreviation		Full name or meaning
AIX	AIX 5L	AIX 5L V5.3
	AIX	AIX V6.1
HNTRLib2		Hitachi Network Objectplaza Trace Library 2
HP-UX	HP-UX (IPF)	HP-UX 11i V2 (IPF)
		HP-UX 11i V3 (IPF)
JP1/AJS	JP1/AJS	Job Management Partner 1/Automatic Job Scheduler
	JP1/AJS - Agent	Job Management Partner 1/Automatic Job Management System 2 - Agent
		Job Management Partner 1/Automatic Job Management System 3 - Agent
	JP1/AJS - Manager	Job Management Partner 1/Automatic Job Management System 2 - Manager
		Job Management Partner 1/Automatic Job Management System 3 - Manager
	JP1/AJS - View	Job Management Partner 1/Automatic Job Management System 2 - View
		Job Management Partner 1/Automatic Job Management System 3 - View
JP1/AJS2 for Mainframe	JP1/AJS2 - Agent for Mainframe	Job Management Partner 1/Automatic Job Management System 2 - Agent for Mainframe
	JP1/AJS2 - Manager for Mainframe	Job Management Partner 1/Automatic Job Management System 2 - Manager for Mainframe
	JP1/AJS2 - View for Mainframe	Job Management Partner 1/Automatic Job Management System 2 - View for Mainframe
JP1/AJS - EE		Job Management Partner 1/Automatic Job Scheduler - Enterprise Edition
JP1/AOM		Job Management Partner 1/Automatic Operation Monitor
JP1/AOM - EE		Job Management Partner 1/Automatic Operation Monitor - Enterprise Edition
JP1/Base		Job Management Partner 1/Base
JP1/Cm2/OAA		Job Management Partner 1/Cm2/Operations Assist Agent
JP1/Cm2/OAM		Job Management Partner 1/Cm2/Operations Assist Manager
JP1/Integrated Management or JP1/IM	Products after version 8
	JP1/IM - Manager	Job Management Partner 1/Integrated Management - Manager
	JP1/IM - Rule Operation	Job Management Partner 1/Integrated Management - Rule Operation
	JP1/IM - View	Job Management Partner 1/Integrated Management - View
	Version 7 and earlier products
	JP1/IM - Central Console	Job Management Partner 1/Integrated Manager - Central Console
	JP1/IM - Central Scope	Job Management Partner 1/Integrated Manager - Central Scope
	JP1/IM - View	Job Management Partner 1/Integrated Manager - View
JP1/OJE		Job Management Partner 1/Open Job Entry
JP1/PFM/SSO		Job Management Partner 1/Performance Management/SNMP System Observer
JP1/SES		Job Management Partner 1/System Event Service
JP1/Software Distribution		Job Management Partner 1/Software Distribution Client
		Job Management Partner 1/Software Distribution Manager
Microsoft Cluster Server		Microsoft(R) Cluster Server
Microsoft Internet Explorer		Microsoft(R) Internet Explorer(R)
NNM	HP NNM	HP Network Node Manager Starter Edition software version 7.5
Solaris	Solaris (SPARC)	Solaris 9/10 (SPARC)
Visual C++		Microsoft(R) Visual C++(R)
Windows NT		Microsoft(R) Windows NT(R) Server Network Operating System Version 4.0
		Microsoft(R) Windows NT(R) Server Enterprise Edition Version 4.0
		Microsoft(R) Windows NT(R) Workstation Operating System Version 4.0
Windows Server 2003	Windows Server 2003	Microsoft(R) Windows Server(R) 2003, Enterprise Edition
		Microsoft(R) Windows Server(R) 2003, Standard Edition
	Windows Server 2003 (x64)	Microsoft(R) Windows Server(R) 2003, Datacenter x64 Edition
		Microsoft(R) Windows Server(R) 2003, Enterprise x64 Edition
		Microsoft(R) Windows Server(R) 2003, Standard x64 Edition
Windows Server 2008	Windows Server 2008 Enterprise	Microsoft(R) Windows Server(R) 2008 Enterprise
		Microsoft(R) Windows Server(R) 2008 Enterprise without Hyper-V
	Windows Server 2008 Standard	Microsoft(R) Windows Server(R) 2008 Standard
		Microsoft(R) Windows Server(R) 2008 Standard without Hyper-V
Windows Vista		Microsoft(R) Windows Vista(R) Business
		Microsoft(R) Windows Vista(R) Enterprise
		Microsoft(R) Windows Vista(R) Ultimate
Windows XP	Windows XP Professional	Microsoft(R) Windows(R) XP Professional Operating System

• Windows is sometimes used generically, referring to Windows Server 2003, Windows Server 2008, Windows Vista, and Windows XP Professional.
• UNIX is sometimes used generically, referring to AIX, HP-UX, and Solaris.
• Note that executing program products might display or output the abbreviations, such as in messages, rather than the full name of a program product.

This manual also uses the following abbreviations:

Abbreviation	Full name or meaning
AMD	Advanced Micro Devices
API	Application Programming Interface
CSV	Comma Separated Value
DB	Database
DNS	Domain Name System
EUC	Extended Unix Code
FD	Floppy Disk
FQDN	Fully Qualified Domain Name
FTP	File Transfer Protocol
GUI	Graphical User Interface
HTML	Hyper Text Markup Language
IP	Internet Protocol
IPF	Itanium(R) Processor Family
ISAM	Indexed Sequential Access Method
JIS	Japanese Industrial Standards
LAN	Local Area Network
LDAP	Lightweight Directory Access Protocol
NAT	Network Address Translator
NIC	Network Interface Card
NTP	Network Time Protocol
OS	Operating System
OU	Organization Unit
POSIX	Portable Operating System Interface for UNIX
RFC	Request For Comments
SNMP	Simple Network Management Protocol
SSL	Secure Socket Layer
TCP/IP	Transmission Control Protocol/Internet Protocol
UAC	User Account Control
UTC	Universal Time Coordinated
UTF	UCS Transformation Format
WWW	World Wide Web

Conventions: "Administrators permissions" as used in this manual

In this manual, Administrators permissions refers to Administrators permissions for the local PC. The local user, domain user, or user of the Active Directory environment can perform tasks requiring Administrators permissions if granted Administrators permissions for the local PC.

Conventions: Diagrams

This manual uses the following conventions in diagrams:

Conventions: Directory names

HP-UX directory names are used in this manual as a general rule. The directory names have symbolic links, so that users of UNIX OSs other than HP-UX can use the same directory names.

When HP-UX uses a different directory name from another flavor of UNIX, both directory names are given.

Conventions: Fonts and symbols

Font and symbol conventions are classified as:

• General font conventions
• Conventions in syntax explanations
• Conventions for mathematical expressions

These conventions are described below.

General font conventions

The following table lists the general font conventions:

Font	Convention
Bold	Bold type indicates text on a window, other than the window title. Such text includes menus, menu options, buttons, radio box options, or explanatory labels. For example, bold is used in sentences such as the following: From the File menu, choose Open. Click the Cancel button. In the Enter name entry box, type your name.
Italics	Italics are used to indicate a placeholder for some actual text provided by the user or system. Italics are also used for emphasis. For example: Write the command as follows: copy source-file target-file Do not delete the configuration file.
Code font	A code font indicates text that the user enters without change, or text (such as messages) output by the system. For example: At the prompt, enter dir. Use the send command to send mail. The following message is displayed: The password is incorrect.

Examples of coding and messages appear as follows (although there may be some exceptions, such as when coding is included in a diagram):

MakeDatabase
...
StoreDatabase temp DB32

In examples of coding, an ellipsis (...) indicates that one or more lines of coding are not shown for purposes of brevity.

Conventions in syntax explanations

Syntax definitions appear as follows:

StoreDatabase [temp|perm] (database-name ...)

The following table lists the conventions used in syntax explanations:

Example font or symbol	Convention
StoreDatabase	Code-font characters must be entered exactly as shown.
database-name	This font style marks a placeholder that indicates where appropriate characters are to be entered in an actual command.
SD	Bold code-font characters indicate the abbreviation for a command.
perm	Underlined characters indicate the default value.
[ ]	Square brackets enclose an item or set of items whose specification is optional.
|	Only one of the options separated by a vertical bar can be specified at the same time.
...	An ellipsis (...) indicates that the item or items enclosed in ( ) or [ ] immediately preceding the ellipsis may be specified as many times as necessary.
()	Parentheses indicate the range of items to which the vertical bar (|) or ellipsis (...) is applicable.
{}	One of the items enclosed in curly brackets must be specified.
	This symbol is used to explicitly indicate a space. 0: Enter one or more spaces, or none (a space is optional). 1: Enter one or more spaces (a space is mandatory).

Conventions for mathematical expressions

This manual uses the following symbols in mathematical expressions:

Symbol	Meaning
x	Multiplication sign
/	Division sign
	Total sign

Conventions: JP1/Base installation folder

This manual uses the following expressions for JP1/Base installation folder:

Product name	Installation folder	Default installation folder#
JP1/Base	installation-folder	system-drive:\Program Files\HITACHI\JP1Base

#: Shows the installation folder when each product is installed as default.

For Windows Server 2008 and Windows Vista, the manual uses the expression system-drive:\ProgramData. The actual value is determined by the OS environment variable when the program is installed. The installation destination may differ depending on the environment.

Conventions: KB, MB, GB, and TB

This manual uses the following conventions:

• 1 KB (kilobyte) is 1,024 bytes.
• 1 MB (megabyte) is 1,024² bytes.
• 1 GB (gigabyte) is 1,024³ bytes.
• 1 TB (terabyte) is 1,024⁴ bytes.

Conventions: Version numbers

The version numbers of Hitachi program products are usually written as two sets of two digits each, separated by a hyphen. For example:

• Version 1.00 (or 1.0) is written as 01-00.
• Version 2.05 is written as 02-05.
• Version 2.50 (or 2.5) is written as 02-50.
• Version 12.25 is written as 12-25.

The version number might be shown on the spine of a manual as Ver. 2.00, but the same version number would be written in the program as 02-00.

[Contents][Back][Next]

All Rights Reserved. Copyright (C) 2009, Hitachi, Ltd.