Job Management Partner 1/Performance Management - Remote Monitor for Platform Description, User's Guide and Reference

Page Faults

Overview

The Page Faults alarm monitors the memory load status.

Main settings

Table 4-12 Alarm property settings in PFM - Web Console (Page Faults)

Alarm properties in PFM - Web Console Setting

Item Details

Main Information Product RM Platform

Message Page fault is %CVS/sec

Enable alarm Selected

Monitoring time range Always monitor

Report alarm when the following damping condition is reached Selected

Interval(s) 3

occurrence(s) during 2

Action Email --

Command --

SNMP Abnormal, Warning, Normal

Conditional expression Record System Summary (PI)

Field Page Fault Counts/sec

Abnormal condition Page Fault Counts/sec >= 5

Warning condition Page Fault Counts/sec >= 4

Legend:

--: The setting is always ignored.

Alarm properties in PFM - Web Console	Setting
Item	Details
Main Information	Product	RM Platform
Message	Page fault is %CVS/sec
Enable alarm	Selected
Monitoring time range	Always monitor
Report alarm when the following damping condition is reached	Selected
Interval(s)	3
occurrence(s) during	2
Action	Email	--
Command	--
SNMP	Abnormal, Warning, Normal
Conditional expression	Record	System Summary (PI)
Field	Page Fault Counts/sec
Abnormal condition	Page Fault Counts/sec >= 5
Warning condition	Page Fault Counts/sec >= 4

Alarm table

PFM RM Platform Template Alarms 09.00

Related reports

Reports/RM Platform/Troubleshooting/Real-Time/System Overview

Note

Do not use this alarm when the OS of the monitored host is HP-UX or Linux.

[Contents][Back][Next]

[Trademarks]