Job Management Partner 1/Performance Management - Remote Monitor for Platform Description, User's Guide and Reference

Network Received

Overview

The Network Received alarm monitors for reception of data that exceeds the bandwidth of the network interface card.

Main settings

Table 4-11 Alarm property settings in PFM - Web Console (Network Received)

Alarm properties in PFM - Web Console		Setting
Item	Details
Main Information	Product	RM Platform
	Message	Received is %CVS bytes/sec
	Enable alarm	Selected
	Monitoring time range	Always monitor
	Report alarm when the following damping condition is reached	Selected
	Interval(s)	5
	occurrence(s) during	3
Action	Email	--
	Command	--
	SNMP	Abnormal, Warning, Normal
Conditional expression	Record	Network Interface Overview (PI_NET)
	Field	Rcvd Bytes/sec
	Abnormal condition	Rcvd Bytes/sec >= 50000#1
	Warning condition	Rcvd Bytes/sec >= 50000#2

Legend:

--: The setting is always ignored.

#1

A guideline for the value to be set is about 70% of the NIC bandwidth.

#2

A guideline for the value to be set is about 50% of the NIC bandwidth.

Alarm table

PFM RM Platform Template Alarms 09.00

Related reports

Reports/RM Platform/Troubleshooting/Real-Time/Network Data

Note

• Do not use this alarm when the OS of the monitored host is UNIX.
• 50000 is set as the value for this alarm for both abnormal and warning conditions. To use this alarm, change the values for abnormal and warning conditions as appropriate to the user's environment.

[Contents][Back][Next]

All Rights Reserved. Copyright (C) 2009, Hitachi, Ltd.