Job Management Partner 1/Performance Management User's Guide

[Contents][Glossary][Index][Back][Next]

1.2.2 Starting services on the monitoring console server

This subsection describes how to start the PFM - Web Console services on the monitoring console server.

Note:
Check that the PFM - Manager services that you want to connect PFM - Web Console are operating before starting the PFM - Web Console services.
Organization of this subsection
(1) Starting services manually
(2) Starting services automatically

(1) Starting services manually

The following two methods can be used to start the PFM - Web Console services on the monitoring console server. Note that the instructions for starting services from the Control Panel apply only to Windows systems.

The following describes each procedure.

(a) Starting by using a command

Use the jpcwstart command to start services. With the jpcwstart command, you can start the services only on the host to which you have logged on. You cannot start the services of the Performance Management programs on the remote host.

To start services by using a command:

  1. Log on to the monitoring console server (the host that has PFM - Web Console installed).

  2. Execute the jpcwstart command.
    The jpcwstart command is stored in the following folder:
    • In Windows:
      PFM-Web-Console-installation-folder\tools
    • In UNIX:
      /opt/jp1pcwebcon/tools
    Execute the command to start the PFM - Web Service and PFM - Web Console services.

(b) Starting from the Control Panel

To start services from the Control Panel:

  1. Log on to the monitoring console server (the host that has PFM - Web Console installed).

  2. From the Start menu of Windows, choose Settings, Control Panel, Administrative Tool, and then Services.
    The Services dialog box appears.

  3. Right-click the PFM - Web Console service, and from the pulldown menu choose Start.

  4. Right-click the PFM - Web Service service, and from the pulldown menu choose Start.

(2) Starting services automatically

(a) In Windows

With the default installation settings, the PFM - Web Console services are set to start automatically when the system starts. For this reason, no operation is necessary after starting the system.

Reference note: How to cancel or reset the automatic start:
To cancel or reset the automatic start:
  1. Log on to the monitoring console server (the host that has PFM - Web Console installed).
  2. From the Start menu of Windows, choose Settings, Control Panel, Administrative Tool, and then Services.
    The Services dialog box appears.
  3. Choose the PFM - Web Console service, and from the pulldown menu choose Properties.
    The Properties dialog box of the PFM - Web Console service appears.
  4. Set the startup type.
    To cancel the automatic start, select Manual.
    To reset the automatic start, select Automatic.
  5. Click the OK button.
    The Properties dialog box of the PFM - Web Console service is closed.
  6. Choose the PFM - Web Service service, and from the pulldown menu choose Properties.
    The Properties dialog box of the PFM - Web Service appears.
  7. Set the startup type.
    To cancel the automatic start, select Manual.
    To reset the automatic start, select Automatic.
  8. Click the OK button.

Notes:
  • Make sure that the startup types of the PFM - Web Console services and the PFM - Web Service services are the same.
  • Do not change the settings of the service account. Changing the settings might cause service operation errors.

(b) In UNIX

To automatically start services at system startup, use the service automatic start script file for the PFM - Web Console service.

To set up automatic starting of services:

  1. Log on to the host where you want to start services automatically.

  2. Execute the following command to move to the /opt/jp1pcwebcon directory:
    cd /opt/jp1pcwebcon

  3. Set the service automatic start script file for PFM - Web Console.
    The names of the .model file of the service automatic start script and the service automatic start script file are as follows:
    • Name of the .model file of the service automatic start script: jpcw_start.model
    • Name of the service automatic start script file: jpcw_start
    Copy the .model file of the service automatic start script as the service automatic start script file, and add execution permission. Execute the commands as follows:
    cp -p jpcw_start.model jpcw_start
    chmod 555 jpcw_start

[Contents][Back][Next]

[Trademarks]

All Rights Reserved. Copyright (C) 2009, Hitachi, Ltd.