Job Management Partner 1/Performance Management Planning and Configuration Guide

Appendix H.4 Monitoring template (report)

Organization of this subsection

(1) Format of report explanations

(2) Organization of report folders

(3) List of reports

(4) System Overview (Historical)

(5) System Overview (Real-Time)

(6) System Overview (Status Change)

(7) System Summary (4.0)

(8) Agent Overview (Historical)

(9) Agent Overview (Status Change)

(10) Host Availability (4.0)

(11) Hosts Availability (4.0)

(12) Hosts Status (Real-Time) (4.0)

(13) Agent Detail (Historical)

(14) Agent Detail (Real-Time)

(1) Format of report explanations

Reports are listed in alphabetical order and described under the following headings.

Report name

Shows the name of the report in the monitoring template.

Synopsis

Provides a summary of the information that can be viewed in the report.

Location

Shows the location of the report.

Records

Shows the type of performance data records on which the report is based. Before you can display a historical report, you must set up the Performance Management to collect the records indicated here. Before displaying the report, display the agent properties in the Agents page of PFM - Web Console, and make sure that Log = Yes is set for these records. This setting is not required for the records in a real-time report.

Fields

Shows a table of the fields used in the report.

Drilldown reports (field level)

Shows a table of the reports in the monitoring template that are associated with the fields in the report. You can display these drilldown reports by clicking a graph, list, or table in the report window of PFM - Web Console. By displaying a drilldown report from a time item in a historical report, you can narrow down the time period of the data in the report. Only some reports have drilldown reports.

For details on drilldown reports, see the chapter that explains creation of reports for operation analysis in the Job Management Partner 1/Performance Management User's Guide.

(2) Organization of report folders

The health check agent report folders are organized as follows. The items in angle brackets are folder names.
<HealthCheck>
 +-- <Monthly Trend>
         +-- System Summary (4.0)
         +-- Hosts Availability (4.0)
             +-- <Drilldown Only>
                   +-- Host Availability (4.0)
 +-- <Status Reporting>
                   +-- System Overview (Historical)
                   +-- System Overview (Status Change)
                   +-- System Summary (4.0)
                   +-- Hosts Availability (4.0)
                   +-- <Drilldown Only>
                         +-- Host Availability (4.0)
 +-- <Troubleshooting>
         +-- <Real-Time>
                   +-- System Overview (Real-Time)
                   +-- Hosts Status (Real-Time) (4.0)
             +-- <Drilldown Only>
                   +-- Agent Detail (Real-Time)
                   +-- 
         +-- <Recent Past>
                   +-- System Overview (Historical)
                   +-- System Overview (Status Change)
             +-- <Drilldown Only>
                   +-- Agent Detail (Historical)
                   +-- Agent Overview (Historical)
                   +-- Agent Overview (Status Change)
 
The folder contents are as follows.

Status Reporting folder
Folder for reports with data aggregated every day or week, used for surveying general system trends.

Troubleshooting folder
Folder for reports with troubleshooting data, used for identifying the cause of problems that occur in the system.

Real-Time folder
Folder for real-time reports used to check the current system status.

Recent Past folder
Folder for historical reports with data aggregated for each minute of the past hour.

These folders might contain some of the following subfolders. Which of these folders appears depends on the parent folder. The subfolders are as follows:

Advanced folder
Folder for reports that use records for which the default setting of Log = No is set in the agent properties. To display the reports in this folder, you need to set Log = Yes for these records in PFM - Web Console.

Drilldown Only folder
Folder for reports displayed as drilldown report (field level) reports. These reports are used to display detailed information about fields in the parent report.

(3) List of reports

The following table lists the reports defined in the monitoring template in alphabetical order.

Table H-2 List of reports

Report name Displayed information

Agent Detail (Historical) Detailed health check results

Agent Detail (Real-Time) Detailed health check results

Agent Overview (Historical) Summary of health check results

Agent Overview (Status Change) Summary of health check results

Host Availability (4.0) Information such as running time and rate of hosts that make up the system (drilldown report)

Hosts Availability (4.0) Information such as running time and rate of hosts that make up the system

Hosts Status (Real-Time) (4.0) Operating status of hosts that make up the system

System Overview (Historical) Summary of health check results

System Overview (Real-Time) Summary of health check results

System Overview (Status Change) Summary of health check results

System Summary (4.0) Operating status of hosts that make up the system

Report name	Displayed information
Agent Detail (Historical)	Detailed health check results
Agent Detail (Real-Time)	Detailed health check results
Agent Overview (Historical)	Summary of health check results
Agent Overview (Status Change)	Summary of health check results
Host Availability (4.0)	Information such as running time and rate of hosts that make up the system (drilldown report)
Hosts Availability (4.0)	Information such as running time and rate of hosts that make up the system
Hosts Status (Real-Time) (4.0)	Operating status of hosts that make up the system
System Overview (Historical)	Summary of health check results
System Overview (Real-Time)	Summary of health check results
System Overview (Status Change)	Summary of health check results
System Summary (4.0)	Operating status of hosts that make up the system

(4) System Overview (Historical)

Synopsis

The System Overview (Historical) report displays an overview of the health check results. You can use this report to check the operating status of each agent in table format, or view a line graph that shows how the status of each agent has changed over time. Because higher numerical values in the graph represent higher severity levels, you can visually check the source of any problems that may occur. By drilling down to another report, you can concentrate on a specific agent or host, or switch to a detailed report that describes the operating status of a specific agent.

Location

Reports/HealthCheck/Status Reporting/Daily Trend

Reports/HealthCheck/Troubleshooting/Recent Past

Records

Health Check Detail (PD_HC)

Fields

Field name Description

Polling Date and Time Polling time

Agent PFM - Agent or PFM - RM name

Host PFM - Agent or PFM - RM host name

Agent Op Status Operating status of the agent

Message Text Detailed information about the agent operating status

Drilldown reports (field level)

Report name Description

Agent Overview (Historical) Shows the operating status of the selected agent in detail. Display this report by clicking the Agent or Host field.

Agent Detail (Historical) Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status or Agent Op Status by Num field.

Field name	Description
Polling Date and Time	Polling time
Agent	PFM - Agent or PFM - RM name
Host	PFM - Agent or PFM - RM host name
Agent Op Status	Operating status of the agent
Message Text	Detailed information about the agent operating status

Report name	Description
Agent Overview (Historical)	Shows the operating status of the selected agent in detail. Display this report by clicking the Agent or Host field.
Agent Detail (Historical)	Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status or Agent Op Status by Num field.

(5) System Overview (Real-Time)

Outline

The System Overview (Real-Time) report displays an overview of the latest health check results. You can use this report to check the operating status of each agent in table format, or drill down to a detailed report that describes the operating status of a specific agent.

Location

Reports/HealthCheck/Troubleshooting/Real-Time

Records

Health Check Detail (PD_HC)

Field

Field name Description

Polling Date and Time Polling time

Agent PFM - Agent or PFM - RM name

Host PFM - Agent or PFM - RM host name

Agent Op Status Operating status of the agent

Message Text Detailed information about the agent operating status

Drilldown reports (field level)

Report name Description

Agent Detail (Real-Time) Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status field.

Field name	Description
Polling Date and Time	Polling time
Agent	PFM - Agent or PFM - RM name
Host	PFM - Agent or PFM - RM host name
Agent Op Status	Operating status of the agent
Message Text	Detailed information about the agent operating status

Report name	Description
Agent Detail (Real-Time)	Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status field.

(6) System Overview (Status Change)

Synopsis

The System Overview (Status Change) report displays an overview of the health check results. The information in this report is the same as the System Overview (Historical) report, with the exception that the System Overview (Status Change) report only displays fields that have changed. It does not contain a graph. By drilling down to another report, you can concentrate on a specific agent or host, or switch to a detailed report that describes the operating status of a specific agent.

Location

Reports/HealthCheck/Status Reporting/Daily Trend

Reports/HealthCheck/Troubleshooting/Recent Past

Records

Health Check Detail (PD_HC)

Fields

Field name Description

Polling Date and Time Polling time

Agent PFM - Agent or PFM - RM name

Host PFM - Agent or PFM - RM host name

Agent Op Status Operating status of the agent

Message Text Detailed information about the agent operating status

Drilldown reports (field level)

Report name Description

Agent Overview (Status Change) Shows the operating status of the selected agent in detail. Display this report by clicking the Agent or Host field.

Agent Detail (Historical) Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status field.

Field name	Description
Polling Date and Time	Polling time
Agent	PFM - Agent or PFM - RM name
Host	PFM - Agent or PFM - RM host name
Agent Op Status	Operating status of the agent
Message Text	Detailed information about the agent operating status

Report name	Description
Agent Overview (Status Change)	Shows the operating status of the selected agent in detail. Display this report by clicking the Agent or Host field.
Agent Detail (Historical)	Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status field.

(7) System Summary (4.0)

Outline

The System Summary (4.0) report shows the operating status of hosts that make up the system, based on the results of the health check. You can use this report to confirm the operating status of each host in table format, or view a line graph that shows how the total number of hosts and the number of running hosts has changed over time.

Note

Depending on when a host starts or stops operating, the number of operating hosts might have changed, even if Num of Available Hosts (Max) and Num of Available Hosts (Min) have not changed.

Location

Reports/HealthCheck/Monthly Trend

Reports/HealthCheck/Status Reporting/Daily Trend

Records

System Overview (PI_SYS)

Field

Field name Description

Num of Hosts (Max) Total number of hosts in the system (maximum)

Num of Available Hosts (Max) Total number of running hosts in the system (maximum)

Num of Available Hosts (Min) Total number of running hosts in the system (minimum)

% Available Hosts Running rate of hosts (%) in the system

Field name	Description
Num of Hosts (Max)	Total number of hosts in the system (maximum)
Num of Available Hosts (Max)	Total number of running hosts in the system (maximum)
Num of Available Hosts (Min)	Total number of running hosts in the system (minimum)
% Available Hosts	Running rate of hosts (%) in the system

(8) Agent Overview (Historical)

Synopsis

The Agent Overview (Historical) report displays an overview of the health check results. You can use this report to check the operating status of each agent in table format, or view a line graph that shows how the status of each agent has changed over time. Because higher numerical values in the graph represent higher severity levels, you can visually check the source of any problems that may occur. You can also drill down to a detailed report that describes the operating status of a specific agent.

Location

Reports/HealthCheck/Troubleshooting/Recent Past/Drilldown Only

Records

Health Check Detail (PD_HC)

Fields

Field name Description

Polling Date and Time Polling time

Agent PFM - Agent or PFM - RM name

Host PFM - Agent or PFM - RM host name

Agent Op Status Operating status of the agent

Message Text Detailed information about the agent operating status

Drilldown reports (field level)

Report name Description

Agent Detail (Historical) Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status or Agent Op Status by Num field.

Field name	Description
Polling Date and Time	Polling time
Agent	PFM - Agent or PFM - RM name
Host	PFM - Agent or PFM - RM host name
Agent Op Status	Operating status of the agent
Message Text	Detailed information about the agent operating status

Report name	Description
Agent Detail (Historical)	Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status or Agent Op Status by Num field.

(9) Agent Overview (Status Change)

Synopsis

The Agent Overview (Status Change) report displays an overview of the health check results. The information in this report is the same as the Agent Overview (Historical) report, with the exception that the Agent Overview (Status Change) report only displays fields that have changed. It does not contain a graph. You can also drill down from this report to a detailed report that describes the operating status of a specific agent. This report is available as a drilldown report from the System Overview (Status Change) report.

Location

Reports/HealthCheck/Troubleshooting/Recent Past/Drilldown Only

Records

Health Check Detail (PD_HC)

Fields

Field name Description

Polling Date and Time Polling time

Agent PFM - Agent or PFM - RM name

Host PFM - Agent or PFM - RM host name

Agent Op Status Operating status of the agent

Message Text Detailed information about the agent operating status

Drilldown reports (field level)

Report name Description

Agent Detail (Historical) Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status field.

Field name	Description
Polling Date and Time	Polling time
Agent	PFM - Agent or PFM - RM name
Host	PFM - Agent or PFM - RM host name
Agent Op Status	Operating status of the agent
Message Text	Detailed information about the agent operating status

Report name	Description
Agent Detail (Historical)	Shows the operating status of the selected agent in detail. Display this report by clicking the Agent Op Status field.

(10) Host Availability (4.0)

Outline

The Host Availability (4.0) report shows information such as the running time and rate of hosts that make up the system, based on the results of the health check. You can use this report to confirm the operating status of each host in table format, or view a line graph that shows how the running rate of each host has changed over time. This report is available as a drilldown report from the Hosts Availability (4.0) report.

Location

Reports/HealthCheck/Monthly Trend/Drilldown Only

Reports/HealthCheck/Status Reporting/Daily Trend/Drilldown Only

Records

Host Availability (PI_HAVL)

Field

Field name Description

Host Host name

Availability Running rate (%)

Total Available Time Running time within the monitoring time (second)

Total Monitoring Time Monitoring time (second)

Field name	Description
Host	Host name
Availability	Running rate (%)
Total Available Time	Running time within the monitoring time (second)
Total Monitoring Time	Monitoring time (second)

(11) Hosts Availability (4.0)

Outline

The Hosts Availability (4.0) report shows information such as the available time and availability of hosts that make up the system, based on the results of the health check. You can use this report to confirm the operating status of each host in table format, or view a line graph that shows how the running rate of each host has changed over time. You can drilldown to concentrate on a detailed report for a specific host.

Location

Reports/HealthCheck/Monthly Trend

Reports/HealthCheck/Status Reporting/Daily Trend

Records

Host Availability (PI_HAVL)

Field

Field name Description

Host Host name

Availability Running rate (%)

Total Available Time Running time within the monitoring time (second)

Total Monitoring Time Monitoring time (second)

Field name	Description
Host	Host name
Availability	Running rate (%)
Total Available Time	Running time within the monitoring time (second)
Total Monitoring Time	Monitoring time (second)

(12) Hosts Status (Real-Time) (4.0)

Outline

The Hosts Status (Real-Time) (4.0) report displays the health check result, consolidating the hosts that make up the system.

Location

Reports/HealthCheck/Troubleshooting/Real-Time

Records

Host Detail (PD_HOST)

Field

Field name Description

Polling Date and Time Date and time of polling

Host Host name

Status Host status

Field name	Description
Polling Date and Time	Date and time of polling
Host	Host name
Status	Host status

(13) Agent Detail (Historical)

Synopsis

The Agent Detail (Historical) report displays detailed health check results. This report displays the detailed operating status of agents in list format. You can use this report to view detailed information about a specific agent.

This report is available as a drilldown report from the System Overview (Historical / Status Change) and Agent Overview (Historical / Status Change) reports.

Location

Reports/HealthCheck/Troubleshooting/Recent Past/Drilldown Only

Records

Health Check Detail (PD_HC)

Fields

Field name Description

Polling Date and Time Polling time

Agent PFM - Agent or PFM - RM name

Host PFM - Agent or PFM - RM host name

Agent Op Status Operating status of the agent

Collector Op Status Operating status of Agent Collector and Remote Monitor Collector services

Collector Op Status Last-Updated Time when the operating status of Agent Collector and Remote Monitor Collector services were last updated

Store Op Status Operating status of Agent Store and Remote Monitor Store services

Store Op Status Last-Updated Time when the operating status of Agent Store and Remote Monitor Store services were last updated

AH Op Status Operating status of the Action Handler service

AH Op Status Last-Updated Time when the operating status of the Action Handler service was last updated

Message Text Detailed information about the agent operating status

Field name	Description
Polling Date and Time	Polling time
Agent	PFM - Agent or PFM - RM name
Host	PFM - Agent or PFM - RM host name
Agent Op Status	Operating status of the agent
Collector Op Status	Operating status of Agent Collector and Remote Monitor Collector services
Collector Op Status Last-Updated	Time when the operating status of Agent Collector and Remote Monitor Collector services were last updated
Store Op Status	Operating status of Agent Store and Remote Monitor Store services
Store Op Status Last-Updated	Time when the operating status of Agent Store and Remote Monitor Store services were last updated
AH Op Status	Operating status of the Action Handler service
AH Op Status Last-Updated	Time when the operating status of the Action Handler service was last updated
Message Text	Detailed information about the agent operating status

(14) Agent Detail (Real-Time)

Synopsis

The Agent Detail (Real-Time) report displays detailed health check results. This report displays the detailed operating status of agents in list format. You can use this report to view detailed information about a specific agent. This report is available as a drilldown report from the System Overview (Real-Time) report.

Location

Reports/HealthCheck/Troubleshooting/Real-Time/Drilldown Only

Records

Health Check Detail (PD_HC)

Fields

Field name Description

Polling Date and Time Polling time

Agent PFM - Agent or PFM - RM name

Host PFM - Agent or PFM - RM host name

Agent Op Status Operating status of the agent

Collector Op Status Operating status of Agent Collector and Remote Monitor Collector services

Collector Op Status Last-Updated Time when the operating status of Agent Collector and Remote Monitor Collector services was last updated

Store Op Status Operating status of Agent Store and Remote Monitor Store services

Store Op Status Last-Updated Time when the operating status of Agent Store and Remote Monitor Store services was last updated

AH Op Status Operating status of the Action Handler service

AH Op Status Last-Updated Time when the operating status of the Action Handler service was last updated

Message Text Detailed information about the agent operating status

Field name	Description
Polling Date and Time	Polling time
Agent	PFM - Agent or PFM - RM name
Host	PFM - Agent or PFM - RM host name
Agent Op Status	Operating status of the agent
Collector Op Status	Operating status of Agent Collector and Remote Monitor Collector services
Collector Op Status Last-Updated	Time when the operating status of Agent Collector and Remote Monitor Collector services was last updated
Store Op Status	Operating status of Agent Store and Remote Monitor Store services
Store Op Status Last-Updated	Time when the operating status of Agent Store and Remote Monitor Store services was last updated
AH Op Status	Operating status of the Action Handler service
AH Op Status Last-Updated	Time when the operating status of the Action Handler service was last updated
Message Text	Detailed information about the agent operating status

[Contents][Back][Next]

[Trademarks]