Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 2

[Contents][Glossary][Index][Back][Next]

2.4 Setting up the event/action control environment

The environment for starting event jobs requires different settings in the manager environment (JP1/AJS3 - Manager) and the agent environment (JP1/AJS3 - Agent).

The table below lists the environment setting parameters to be used to set event/action control in the manager environment (JP1/AJS3 - Manager) and the agent environment (JP1/AJS3 - Agent).

To determine whether an environment setting parameter is to be set in Windows or UNIX, see the Applicable OS column. To determine whether an environment setting parameter is to be set in the manager environment (JP1/AJS3 - Manager) or the agent environment (JP1/AJS3 - Agent), see the Applicable product column.

Table 2-4 Environment setting parameters (event action control)

No. Definition key Environment setting parameter Definition Applicable OS Applicable product
1 [{JP1_DEFAULT|logical-host-name}\JP1AOMMANAGER]#1 "WaitInfFileOutDir"= Name of the directory to which the wait information file (settings for the manager process) is output Windows
UNIX		 M
2 [JP1_DEFAULT\JP1AOMMANAGER]#2 "_AgentStartStopResolveMode"= Name resolution option for an agent host Windows
UNIX		 M
3
  • For scheduler service (common)
    [{JP1_DEFAULT|logical-host-name}\JP1AJS2\SCHEDULER\EV\MANAGER]#1
  • For the compatible ISAM configuration
    [{JP1_DEFAULT|logical-host-name}\JP1AOMMANAGER]#1
 "FileWriteMode"= File update mode Windows
UNIX		 M
4 "MacVarDQuotation"= Option for enabling double quotation marks (") in passing information Windows
UNIX		 M
5 "DNSEstablish"= Definition for running JP1/AJS3 in FQDN format for DNS operation that uses event jobs Windows
UNIX		 M
6 "FixedHostnameForAgent"= Option for ensuring that a fixed manager host name is used Windows
UNIX		 M
7
  • For scheduler service (common)
    [{JP1_DEFAULT|logical-host-name}\JP1AJS2\SCHEDULER\EV\MANAGER]#1
  • For scheduler service (individual)
    [{JP1_DEFAULT|logical-host-name}\JP1AJSMANAGER\scheduler-service-name\EV\MANAGER]#1
  • For the compatible ISAM configuration
    [{JP1_DEFAULT|logical-host-name}\JP1AOMMANAGER]#1

 "EvJobExecContinue"= Option to continue execution of active event jobs Windows
UNIX		 M
8 "BlockadeTimeoutInterval"= Period of time for monitoring an event job in the blocked status Windows
UNIX		 M
9 "NotificationConstantRetry"= Option for ensuring that the sending of unreported information is retried at regular intervals Windows
UNIX		 M
10 "NotificationRetryInterval"= Interval for sending unreported information Windows
UNIX		 M
11 "NotificationRetryCount"= Maximum number of retries for sending unreported information Windows
UNIX		 M
12
  • For scheduler service (common)
    [{JP1_DEFAULT|logical-host-name}\JP1AJS2\SCHEDULER\EV\MANAGER]#1
  • For the event/action control agent
    [{JP1_DEFAULT|logical-host-name}\JP1AOMAGENT]#1
  • For the compatible ISAM configuration
    [{JP1_DEFAULT|logical-host-name}\JP1AOMMANAGER]#1
 "ClientBindFlag"= Behavior of the send binding method Windows
UNIX		 M, A
13 [{JP1_DEFAULT|logical-host-name}\JP1AOMAGENT]#1 "WaitInfFileOutDir"= Name of the directory to which the wait information file (settings for the agent process) is output Windows
UNIX		 M, A
14 "EvjobInfFile"= Name of directory in which inherited event job information is saved Windows
UNIX		 M, A
15 "HowUseInfWhenHA"= Information inheritance when a failover occurs Windows
UNIX		 M, A
16 "InformationWhenShutDown"= How information is inherited at system shutdown Windows
UNIX		 M, A
17 "FilewatchinfContinue"= How information of the file monitoring job is in inherited Windows
UNIX		 M, A
18 "FileWriteMode"= File update mode Windows
UNIX		 M, A
19 "EVProcessHA"= Option used when a detail process terminates Windows
UNIX		 M, A
20 "EventSequential"= Event order option Windows
UNIX		 M, A
21 "RetryAgtStartNotification"= Definition for resending the startup notification if sending of a startup notification has failed Windows
UNIX		 M, A
22 "ClientConnectTimeout"= Time out value for the connection between the event/action control manager and the event/action control agent for communication Windows
UNIX		 M, A
23 "NotificationRetryInterval"= Interval for sending unreported information Windows
UNIX		 M, A
24 "NotificationRetryCount"= Maximum number of retries for sending unreported information Windows
UNIX		 M, A
25 [JP1_DEFAULT\JP1AOMAGENT]#2 "RecvTimeout"= Whether to set a timeout for receiving data in event job socket communication Windows
UNIX		 M, A

Legend:
M: JP1/AJS3 - Manager
A: JP1/AJS3 - Agent

#1
Specify JP1_DEFAULT for the physical host. For logical-host-name, specify the name of a logical host.

#2
The setting of this parameter is valid for the physical and all logical hosts.

The following describes each of the environment setting parameters.

Parameters that are not described here are used for maintenance purposes. Do not change their values.

The default value is used whenever a value is not specified for an environment setting parameter.

Organization of this section
(1) "WaitInfFileOutDir"="name-of-directory-to-which-the-wait-information-file-is-output" (setting for the manager process)
(2) "_AgentStartStopResolveMode"="{optimized|normal}"
(3) "FileWriteMode"="{sync|nosync}" (setting for the manager process)
(4) "MacVarDQuotation"="{Y|N}"
(5) "DNSEstablish"="{Y|N}"
(6) "FixedHostnameForAgent"="{Y|N}"
(7) "EvJobExecContinue"="{Y|N}"
(8) "BlockadeTimeoutInterval"=dword:time-for-monitoring-event-jobs-in-blocked-status
(9) "NotificationConstantRetry"="{Y|N}"
(10) "NotificationRetryInterval"=dword:retry-interval-for-sending-unreported-information-from-the-manager-host-to-the-agent-host
(11) "NotificationRetryCount"=dword:maximum-number-of-retries-for-sending-unreported-information-from-the-manager-host-to-the-agent-host
(12) "ClientBindFlag"=dword:behavior-of-the-send-binding-method
(13) "WaitInfFileOutDir"="name-of-directory-to-which-the-wait-information-file-is-output" (setting for the agent process)
(14) "EvjobInfFile"="name-of-directory-for-inheriting-event-or-job-information"
(15) "HowUseInfWhenHA"="{Y|N}"
(16) "InformationWhenShutDown"="{K|B}"
(17) "FilewatchinfContinue"="{Y|N}"
(18) "FileWriteMode"="{sync|nosync}" (setting for agent processes)
(19) "EVProcessHA"="{Y|N}"
(20) "EventSequential"="{Y|N}"
(21) "RetryAgtStartNotification"="{Y|N}"
(22) "ClientConnectTimeout"=dword:connection-timeout-for-communication-between-the-event/action-control-manager-and-the-event/action-control-agent
(23) "NotificationRetryInterval"=dword:retry-interval-for-sending-unreported-information-from-the-agent-host-to-the-manager-host
(24) "NotificationRetryCount"=dword:maximum-number-of-retries-for-sending-unreported-information-from-the-agent-host-to-the-manager-host
(25) "RecvTimeout"="{Y|N}"

(1) "WaitInfFileOutDir"="name-of-directory-to-which-the-wait-information-file-is-output" (setting for the manager process)

Use this parameter to specify the name of the directory to which detailed information about event jobs and information about the receive status of events monitored by the start condition (wait information) is output. Specify a full path name.

Note that you need to specify this directory only if you want to change the default directory.

Specify this parameter if you want to output the wait information to a folder that is not specified by default or to support a cluster configuration.

The wait information is output to the directory you specify in this parameter or to the following folder in the assumed directory.

This parameter is valid only for a manager process in an ISAM configuration, which ensures compatibility, or for a manager process started from host-service management in a standard configuration.

Specifiable values
A character string of no more than 180 bytes

Default value
  • In Windows:
    JP1/AJS3-Manager-installation-folder
  • In UNIX:
    /var/opt/jp1ajs2

Recommended value
  • For a physical host:
    Blank
  • For a logical host:
    directory-name-of-a-common-disk

When the setting takes effect
The next time the JP1/AJS3 service is started

(2) "_AgentStartStopResolveMode"="{optimized|normal}"

Use this parameter to specify whether to optimize the name resolution processing of an agent host.

This parameter is valid only for the compatible ISAM configuration.

Specifiable values

optimized
Specify this value to optimize the name resolution processing of an agent host name.
Only the name of the agent host that runs event jobs or jobnets with start conditions is resolved.

normal
Specify this value if you do not want to optimize name resolution processing of the agent host name.

Default value
normal

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service is started

(3) "FileWriteMode"="{sync|nosync}" (setting for the manager process)

Use this parameter to specify whether to perform synchronous writing when the wait information file is updated.

Select the writing method appropriate for performance, reliability, and method of operation.

Specifiable values

sync
Synchronous writing is always performed when a file is updated. This writing mode improves reliability, but reduces performance.
Select this method when reliability is more important, as in a cluster environment.

nosync
Data is written to a disk in response to OS buffering. There is no synchronization with JP1/AJS3 processing. This mode provides better performance than sync, but a system failure will lead to inconsistent information, sometimes causing an event to disappear.

Default value
nosync

Recommended value
  • For a physical host:
    nosync (asynchronous)
  • For cluster use:
    sync (synchronous)

When the setting takes effect
The next time the JP1/AJS3 service is started

Cautionary note
Specify the same parameter value in the manager process (definition key JP1AJSMANAGER\SCHEDULER\EV\MANAGER) and the agent process (definition key JP1AOMAGENT). If you specify nosync for the manager process and sync for agent process, JPJ/AJS3 slows down dramatically. This could happen if a jobnet using an event job or a jobnet with a start condition is registered for execution or is killed, or if an OR job preceded by many event jobs is executed. For the same reason, specify the same setting for the manager and the agents in the manager-agent system.

(4) "MacVarDQuotation"="{Y|N}"

Use this parameter to specify whether to use the option for enabling double quotation marks (") in passing information.

Specifiable values

Y
The option is used.

N
The option is not used.

Default value

N
During a new installation and setup of JP1/AJS3, Y is set.

Recommended value
Y

When the setting takes effect
The next time the JP1/AJS3 service is started

(5) "DNSEstablish"="{Y|N}"

Use this parameter to specify whether to use an FQDN host name when DNS is used.

Specifiable values

Y
An FQDN host name is used when DNS is used.

N
An FQDN host name is not used when DNS is used. The manager sends a host name to agents instead of an FQDN host name.

Default value
N

Recommended value
Set the value appropriate for the operating environment.

When the setting takes effect
The next time the JP1/AJS3 service is started

(6) "FixedHostnameForAgent"="{Y|N}"

Use this parameter to specify whether lower case is always used for alphabetic characters in the manager host name for communication between event/action control processes.

For details, in Windows, see 6.3.16 Settings for ensuring that a fixed manager host name is used when event jobs are executed in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1. In UNIX, see 14.3.17 Settings for ensuring that a fixed manager host name is used when event jobs are executed in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1.

Specifiable values

Y
The host name obtained on the manager host is used for communication for event/action control after case conversion is performed so that all letters are lower case.

N
The host name obtained on the manager host is used for communication for event/action control without case conversion.

Default value
N

Recommended value
Y

When the setting takes effect
The next time the JP1/AJS3 service starts

(7) "EvJobExecContinue"="{Y|N}"

Use this parameter to specify whether to continue execution of an event job when you restart the JP1/AJS3 service on an execution.

For details, see 6.3.6 Resuming event jobs that stopped when the JP1/AJS3 service stopped in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for Windows) or 14.3.6 Resuming event jobs that stopped when the JP1/AJS3 service stopped in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for UNIX).

Specifiable values

Y
Execution of the event job is continued.

N
Execution of the event job ends.

Default value
N

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service is started

Cautionary notes
  • If the version of JP1/AJS2 - Manager is 08-50 and earlier, the option to continue execution of active event jobs cannot be used.
  • Set the option to continue execution of active event jobs for each manager of a physical host and a logical host.

(8) "BlockadeTimeoutInterval"=dword:time-for-monitoring-event-jobs-in-blocked-status

Use this parameter to specify the period of time until an event job in blocked status or a jobnet with start conditions is killed.

For details, see 6.3.10 Setting the period of time for monitoring event jobs in the blocked status in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for Windows) or 14.3.10 Setting the period of time for monitoring event jobs in the blocked status in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for UNIX).

Specifiable values
A hexadecimal value (in hours) from 00000018 to 000002D0 (24 to 720 in decimal)

Default value
dword:000002D0 (720 in decimal)

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service is started

(9) "NotificationConstantRetry"="{Y|N}"

Use this parameter to specify whether to use the regular or gradually increasing retry interval if the connection for communication from the manager host to the agent host fails because of a network error caused by a timeout.

For details, see 6.3.12 Settings for ensuring that the sending of unreported information is retried at regular intervals in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for Windows) or 14.3.13 Settings for ensuring that the sending of unreported information is retried at regular intervals in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for UNIX).

Specifiable values

Y
If a network error caused by a timeout occurs, sending is retried at regular intervals.

N
If a network error caused by a timeout occurs, sending is retried at gradually increasing intervals.

Default value
N

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service starts

(10) "NotificationRetryInterval"=dword:retry-interval-for-sending-unreported-information-from-the-manager-host-to-the-agent-host

Use this parameter to specify the retry interval for sending unreported information from the manager host to the agent host.

For details, see 6.3.13 Changing the send retry interval and the number of retries for sending unreported information in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for Windows) or 14.3.14 Changing the send retry interval and the number of retries for sending unreported information in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for UNIX).

Specifiable values
A hexadecimal value (in seconds) from 00000001 to 00015180 (1 to 86,400 in decimal)

Default value
dword:0000001E (30 in decimal)

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service starts

(11) "NotificationRetryCount"=dword:maximum-number-of-retries-for-sending-unreported-information-from-the-manager-host-to-the-agent-host

Use this parameter to specify the maximum number of retries for sending unreported information from the manager host to the agent host.

For details, see 6.3.13 Changing the send retry interval and the number of retries for sending unreported information in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for Windows) or 14.3.14 Changing the send retry interval and the number of retries for sending unreported information in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for UNIX).

Specifiable values
A hexadecimal value (number of times) from 00000001 to 00015180 (1 to 86,400 in decimal)

Default value
dword:00000B40 (2,880 in decimal)

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service starts

(12) "ClientBindFlag"=dword:behavior-of-the-send-binding-method

Use this parameter to specify whether to match the send binding method used for communication when an event job is executed to the receive binding method.

For details, see 6.3.11 Setting the binding method applied to the outgoing communication used in the execution of event jobs in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for Windows) or 14.3.11 Setting the binding method applied to the outgoing communication used in the execution of event jobs in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for UNIX).

Specifiable values

0
The setting for the send binding method used for communication when an event job is executed is canceled.

1
The send binding method used for communication when an event job is executed is matched to the receive binding method.

Default value
dword:00000000 (0 in decimal)

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service is started

(13) "WaitInfFileOutDir"="name-of-directory-to-which-the-wait-information-file-is-output" (setting for the agent process)

Use this parameter to specify the name of the directory to which information such as the event-generation status of the event job and receive status of events monitored by the start condition (wait information) is output. Specify a full path name. Note that you need to specify this directory only if you want to change the default directory.

Specify this parameter if you want to output the wait information to a folder that is not specified by default or to support a cluster configuration.

The wait information is output to the directory you specify here or to the following directory in the assumed directory.

Specifiable values
A character string of no more than 180 bytes

Default value
  • In Windows:
    JP1/AJS3 - Manager: JP1/AJS3-Manager-installation-folder
    JP1/AJS3 - Agent: JP1/AJS3-Agent-installation-folder
  • In UNIX:
    /var/opt/jp1ajs2

Recommended value
  • For JP1/AJS3 - Manager:
    Physical hosts: Blank
    Logical hosts: directory-name-of-a-common-disk
  • For JP1/AJS3 - Agent:
    Blank

When the setting takes effect
The next time the JP1/AJS3 service is started

(14) "EvjobInfFile"="name-of-directory-for-inheriting-event-or-job-information"

Use this parameter to specify the name of the directory in which the file inheriting the information received in the email reception monitoring jobs and message-queue-reception monitoring jobs is saved. Specify a full path name. Note that you need to specify this directory only if you want to change the default directory.

Specify this parameter if you want to output the information to a folder that is not specified by default or to support a cluster configuration.

Specifiable values
A character string of no more than 180 bytes

Default value
  • In Windows Server 2008:
    %ALLUSERSPROFILE%\HITACHI\JP1\JP1_DEFAULT\JP1AJS2\tmp\infodir (The default value of %ALLUSERSPROFILE% is system-drive\ProgramData.)
  • In Windows Server 2003:
    JP1/AJS3-Manager-installation-folder\tmp\infodir
  • In UNIX:
    /var/opt/jp1ajs2/sys/infoagt/tmp/infodir

Recommended value
  • For JP1/AJS3 - Manager:
    Physical hosts: Blank
    Logical hosts: directory-name-of-a-common-disk
  • For JP1/AJS3 - Agent:
    Blank

When the setting takes effect
The next time the JP1/AJS3 service is started

Cautionary note
JP1/AJS3 does not use the file saved in this directory. Also, because the file is not automatically deleted, delete it when it is no longer needed.

(15) "HowUseInfWhenHA"="{Y|N}"

Use this parameter to specify, in the case of a failover, whether information is to be inherited by the new JP1/AJS3 - Manager or JP1/AJS3 - Agent from the current JP1/AJS3 - Manager or JP1/AJS3 - Agent.

Change the parameter value to discard events generated before the failover if those events include events that could not be reported to JP1/AJS3 - Manager and the failover does not require a shutdown.

Specifiable values

Y
The status existing at failover is inherited by the new JP1/AJS3 - Manager or JP1/AJS3 - Agent. For example, after the switchover, an event that could not be reported to JP1/AJS3 - Manager before the failover occurred will be resent.

N
The status existing at failover is not inherited by the new JP1/AJS3 - Manager or JP1/AJS3 - Agent. For example, an event that could not be reported to JP1/AJS3 - Manager before the failover occurred will be discarded.
Specify Y for normal operation. Also specify Y if cluster operation is not used.

Default value
Y

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service is started

(16) "InformationWhenShutDown"="{K|B}"

Use this parameter to specify whether to report events that could not be reported to JP1/AJS3 - Manager when either the JP1/AJS3 - Manager host or JP1/AJS3 - Agent host was shut down (end with stop processing).

Change the parameter value to discard any such unreported events at the next restart.

Specifiable values

K
When JP1/AJS3 - Manager or JP1/AJS3 - Agent is started after the previous shutdown, the system reports the events that could not be reported to JP1/AJS3 - Manager before the shutdown. For example, when you start the terminated host, events generated before shutdown are reported to JP1/AJS3 - Manager (unless their periods of validity have expired).

B
When JP1/AJS3 - Manager or JP1/AJS3 - Agent is started after the previous shutdown, the system does not report the events that could not be reported to JP1/AJS3 - Manager before the shutdown. That is any such events are discarded. Specify this value if you want information to be inherited only when a power failure occurs.
Specify K for normal operation.

Default value
K

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service is started

(17) "FilewatchinfContinue"="{Y|N}"

Use this parameter to specify whether the information for a file-monitoring job existing at the last shutdown is inherited when JP1/AJS3 - Manager or JP1/AJS3 - Agent is shut down (end with stop processing) during execution of the file-monitoring job.

Change the parameter value in the following case: if the shut-down file-monitoring job is defined in the start conditions and is to be restarted, you do not want the monitoring status to be inherited.

Specifiable values

Y
The JP1/AJS3 - Manager or JP1/AJS3 - Agent started after the shutdown inherits the pre-shutdown monitoring status of a file-monitoring job.

N
The JP1/AJS3 - Manager or JP1/AJS3 - Agent started after shutdown doe not inherit the pre-shutdown monitoring status of a file-monitoring job.

Default value
N
During a new installation and setup of JP1/AJS3, Y is set.

Recommended value
Set the value appropriate for the operating environment.

When the setting takes effect
The next time the JP1/AJS3 service is started

(18) "FileWriteMode"="{sync|nosync}" (setting for agent processes)

Use this parameter to specify whether to permit synchronous writing when the event or job information and wait information file are updated.

Select the writing method appropriate for performance, reliability, and method of operation.

Specifiable values

sync
Synchronous writing is always performed when a file is updated. This writing mode improves reliability, but reduces the performance.
Select this method when reliability is more important, as in a cluster environment.

nosync
Data is written to a disk in response to OS buffering. There is no synchronization with the JP1/AJS3 processing. This mode provides better performance than sync, but a system failure will lead to inconsistent information, sometimes causing an event to disappear.

Default value
nosync

Recommended value
  • For a physical host:
    nosync (asynchronous)
  • For a cluster use:
    sync (synchronous)

When the setting takes effect
The next time the JP1/AJS3 service is started

Cautionary note
Specify the same parameter value in the manager process (definition key JP1AJSMANAGER\scheduler-service-name\EV\MANAGER) and the agent process (definition key JP1AOMAGENT). If you specify nosync for the manager process and sync for the agent process, JPJ/AJS3 operation slows down dramatically. This might happen if a jobnet using an event job or a jobnet with a start condition is registered for execution or is killed, or if an OR job preceded by many event jobs is executed. For the same reason, specify the same setting for the manager and the agents in the manager-agent system.

(19) "EVProcessHA"="{Y|N}"

When event/action control detail processes are terminated with a signal, specify whether to operate at a reduced level without terminating the event/action control agent process, or whether to terminate the processing after stopping all detail processes.

Specifiable values

Y
All the detail processes are stopped, after which the event/action control agent process terminates.

N
Operation continues at a reduced level. The event/action control agent process is not terminated. If some of the detail processes are terminated for a reason such as a signal, you will be able to use only the remaining event jobs that are not affected by those detail processes that have been terminated.

Default value
  • For JP1/AJS3 - Manager:
    If you omit this parameter, Y is assumed.
  • For JP1/AJS3 - Agent:
    If you omit this parameter, N is assumed.
During a new installation and setup of JP1/AJS3, Y is set.

Recommended value
Set the value appropriate for the operating environment.

When the setting takes effect
The next time the JP1/AJS3 service is started

Cautionary notes
  • If you specify Y for the parameter value and then set restarting of the abnormally terminated JP1/AJS3 processes, the agent and detail processes are restarted when the JP1/AJS3 process is restarted. For details about how to restart the abnormally terminated JP1/AJS3 processes, see 7.3.1 Restarting an abnormally terminated JP1/AJS3 process in the Job Management Partner 1/Automatic Job Management System 3 Administration Guide.
  • In UNIX, if you specify N for the parameter value and disable the detail process termination option, registering for execution a job related to an abnormally terminated detail process# causes the job to terminate abnormally.
    #: For example, run the file-monitoring job when the jpocwtflMain process has terminated abnormally.

(20) "EventSequential"="{Y|N}"

Use this parameter to specify whether to use the event order option.

Specifiable values

Y
Specify this value to use the event order option.

N
Specify this value if you do not use the event order option.

Default value
N

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service is started

(21) "RetryAgtStartNotification"="{Y|N}"

Use this parameter to specify whether to resend the startup notification if sending the startup notification has failed.

Specifiable values

Y
The startup notification is resent.

N
The startup notification is not resent.

Default value
N

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service is started

(22) "ClientConnectTimeout"=dword:connection-timeout-for-communication-between-the-event/action-control-manager-and-the-event/action-control-agent

Use this parameter to specify how long to wait for a connection if a connection request for a TCP/IP socket does not immediately result in either success or failure.

If the connection request is not completed within the specified time, the request is canceled as a timeout.

For details about setting this environment setting parameter in the manager environment, see 2.6(1) ClientConnectTimeout.

Specifiable values
A hexadecimal value (in milliseconds) from 000003E8 to 000927C0 (1,000 to 600,000 in decimal)

Default value
  • In Windows:
    dword:00007530 (30,000 in decimal)
  • In UNIX:
    dword:000003E8 (1,000 in decimal)

Recommended value
Set the value appropriate for the operating environment.

When the setting takes effect
The next time the JP1/AJS3 service starts

Cautionary notes
  • If the TCP/IP connection timeout value set in the OS is less than the value set in this environment setting parameter, the timeout value set in the OS overrides the value of the environment setting parameter.
  • If this environment setting parameter is omitted, the default value is used.
  • If a value that cannot be specified for event/action control is specified in this parameter, the default value is used.

(23) "NotificationRetryInterval"=dword:retry-interval-for-sending-unreported-information-from-the-agent-host-to-the-manager-host

Use this parameter to specify the retry interval for sending unreported information from the agent host to the manager host.

For details, see 6.3.13 Changing the send retry interval and the number of retries for sending unreported information in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for Windows) or 14.3.14 Changing the send retry interval and the number of retries for sending unreported information in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for UNIX).

Specifiable values
A hexadecimal value (in seconds) from 00000001 to 00015180 (1 to 86,400 in decimal)

Default value
dword:0000000A (10 in decimal)

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service starts

(24) "NotificationRetryCount"=dword:maximum-number-of-retries-for-sending-unreported-information-from-the-agent-host-to-the-manager-host

Use this parameter to specify the maximum number of retries for sending unreported information from the agent host to the manager host.

For details, see 6.3.13 Changing the send retry interval and the number of retries for sending unreported information in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for Windows) or 14.3.14 Changing the send retry interval and the number of retries for sending unreported information in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 1 (for UNIX).

Specifiable values
A hexadecimal value (number of times) from 00000001 to 00015180 (1 to 86,400 in decimal)

Default value
dword:000021C0 (8,640 in decimal)

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service starts

(25) "RecvTimeout"="{Y|N}"

In interprocess communication for event/action control, if data is not delivered to the receiver for some reason, use this parameter to specify whether to terminate the attempt to receive the data so that the system can proceed to other processing.

Specify this parameter when the communication environment is unstable. For normal operation, specification is not necessary.

Specifiable values

Y
If data is not received within the specified period of time, the data receive processing times out.

N
The system waits for data to arrive.

Default value
N

Recommended value
Default value

When the setting takes effect
The next time the JP1/AJS3 service is started

[Contents][Back][Next]

[Trademarks]

Copyright (C) 2009, 2010, Hitachi, Ltd.
Copyright (C) 2009, 2010, Hitachi Solutions, Ltd.