Job Management Partner 1/Integrated Management - Manager Messages

2.6 Messages related to Central Scope - View (KAVB6001 to KAVB6999)

KAVB6006-E
Please enter input-information.

A required item has not been input in the window.

S:

Waits for re-entry of information.

O:

Enter the required item.

KAVB6007-I
processing
Please wait a while...

processing is being executed.

S:

Processing is executed until it finishes.

O:

Wait until processing finishes.

KAVB6011-I
Do you want to exit (logout)?

Confirms that it is OK to log out.

S:

When the Yes button is clicked, the system logs out. When the No button is clicked, the system does not log out.

KAVB6013-I
Do you want to change the status of all child monitoring nodes to status-or-monitoring-status?

Confirms that you want to change all child monitoring nodes to status-or-monitoring-status.

S:

When the Yes button is clicked, the system changes the statuses of the child monitoring nodes to status-or-monitoring-status. When the No button is clicked, the system does not change the statuses of the child monitoring nodes.

KAVB6014-I
Do you want to change the status of monitoring-node-and-all-child-monitoring-nodes to status-or-monitoring-status?

Confirms that you want to change monitoring-node-and-all-child-monitoring-nodes to status-or-monitoring-status.

S:

When the Yes button is clicked, the system changes monitoring-node-and-all-child-monitoring-nodes to status-or-monitoring-status. When the No button is clicked, the system does not change the monitoring node status.

KAVB6015-I
data with the same name already exists on the server. Do you want to overwrite it?

Confirms that you want to overwrite server data.

S:

When the Yes button is clicked, the system overwrites data. When the No button is clicked, the system does not overwrite data.

KAVB6016-E
The input number for input-information exceeds the maximum input number (number-of-items).

The number of items for input-information exceeds the maximum input number.

S:

Waits for re-entry of information.

O:

Enter the correct number of items.

KAVB6018-I
Do you want to delete data?

Confirms that you want to delete the selected data.

S:

When the Yes button is clicked, the system deletes the selected data from the display area. When the No button is clicked, the system does not delete the selected data from the display area.

KAVB6019-E
An attempt to start the application has failed.
Startup command: start-command
Details: detailed-information

An error occurred during application startup.

S:

Aborts startup of the application.

O:

Confirm that the executed application is still at the location where it was installed.

KAVB6020-I
Do you want to change the status of monitoring-node to status?

Confirms that you want to change the status of the selected monitoring node to status.

S:

When the Yes button is clicked, the system changes the status of the selected monitoring node to status. When the No button is clicked, the system does not change the status of the selected monitoring node.

KAVB6021-I
Updated data has not been saved to the server. Do you want to continue?

Confirms that you want to exit without saving the updated data to the server.

S:

When the Yes button is clicked, the system closes the window without saving the updated data. When the No button is clicked, the system does not close the window.

KAVB6022-E
The file-type was not found.
file-name

There is no local file.

S:

Continues all processing possible without the identified file.

O:

Confirm that file-type exists.

KAVB6023-I
Do you want to update the server's data?

Confirms that you want to save updated data on the server.

S:

When the Yes button is clicked, the system saves updated data on the server. When the No button is clicked, the system does not save updated data.

KAVB6024-E
The file is not supported. Please see online Help.

An attempt to perform preview processing failed because an image file in an unsupported format was specified for a visual icon.

S:

Suspends preview processing.

O:

Check the following items to determine if a specified file is supported as a visual icon, and then correct the specification.

File format is *.gif, *.jpg, or *.png.

Size is between 24 x 24 pixels and 2,048 x 2,048 pixels.

File name (including path) does not exceed 260 bytes.

KAVB6025-W
A visual icon is invalid.
file-name

An image file file-name in an unsupported format was specified for a visual icon.

If there are multiple monitoring nodes configured with invalid visual icons in the same window, only the first invalid file name will be displayed in the dialog box. All invalid file names are output to the integrated trace log.

S:

Uses the icon selected in the Icon (normal) field of the Properties window and continues processing.

O:

Check the following items to determine if a specified file is supported as a visual icon, and then correct the specification.

File format is *.gif, *.jpg, or *.png.

Size is between 24 x 24 pixels and 2,048 x 2,048 pixels.

File name (including path) does not exceed 260 bytes.

KAVB6029-I
Do you want to clear the background image?

Confirms that you want to clear the setting for the background image.

S:

When the Yes button is clicked, the system clears the background image. When the No button is clicked, the system does not change the background image.

KAVB6030-I
The Apply button has not been clicked. Do you want to continue?

Configuration data is enabled when the Apply button is clicked. You are attempting to close a window without clicking the Apply button. This message confirms that you want to close the window without saving the configuration data.

S:

When the Yes button is clicked, the system closes the window without saving the configuration data. When the No button is clicked, the system does not close the window.

KAVB6031-I
Do you want to read "file-name"?

Confirms that you want to read a local file.

S:

When the Yes button is clicked, the system reads the file. When the No button is clicked, the system does not read the file.

KAVB6032-I
Do you want to save "file-name"?

Confirms that you want to save a local file.

S:

When the Yes button is clicked, the system saves the file. When the No button is clicked, the system does not save the file.

KAVB6033-I
Do you want to replace "file-name"?

Confirms that you want to overwrite a local file.

S:

When the Yes button is clicked, the system overwrites and saves the local file. When the No button is clicked, the system does not overwrite and save the file.

KAVB6034-E
An I/O error has occurred during analysis of the "data" file.

An I/O error occurred during analysis of a local definition file.

S:

Continues all processing possible without the identified file.

O:

Determine whether the data definition file was modified.

KAVB6036-I
Do you want to replace the tree configuration information being edited?

Confirms that you want to read new tree configuration information without saving the tree configuration information currently being modified on the server.

S:

When the Yes button is clicked, the system replaces the existing tree configuration information with new tree configuration information. When the No button is clicked, the system returns to the startup window without making any changes.

KAVB6041-E
A system error occurred while startup-processing.

An error was detected during startup-processing.

S:

Aborts processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6042-E
A memory shortage occurred while startup-processing.

Processing could not continue due to a memory shortage during startup-processing.

S:

Aborts processing.

O:

Close all windows that can be closed, and then retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6043-E
The monitoring node cannot be moved to itself.

A monitoring group was dragged to the identical monitoring group in the tree area. A monitoring node on a monitoring tree cannot be moved to itself.

S:

Aborts processing.

O:

Perform the operation again properly.

KAVB6044-E
The monitoring group cannot be moved to its own child monitoring group.

A monitoring group on a tree cannot be moved to its own child monitoring group.

S:

Aborts processing.

O:

Perform the operation again properly.

KAVB6046-E
The user (user) does not have permission necessary for operations.

The user does not have permission necessary for the operation.

S:

Aborts processing.

O:

Log in as a user who has permission.

If this message is displayed when saving changes made in the Monitoring Tree (Editing) window, see 9.5(10) Actions to take when an earlier version of JP1/IM - Central Scope or JP1/IM - View is being used in the manual Job Management Partner 1/Integrated Management - Manager Administration Guide.

KAVB6052-I
The latest status will be acquired because the configuration of the monitoring tree has changed.
If any properties are being displayed, please close them after closing this message.

Reports that the monitoring tree configuration will be updated. When the monitoring tree's monitoring range setting is enabled, this message is also displayed when the connection destination server restarts.

S:

When OK is clicked, acquires the latest status of the monitoring tree.

KAVB6053-E
The regular expression specification is incorrect.

The regular expression specification is incorrect.

S:

Waits for re-entry of information.

O:

Check the regular expressions that can be used, reconfigure the conditions, and then retry the operation.

KAVB6054-E
The same monitoring node attribute name is already registered.

Duplicate conditions cannot be entered because extended attributes are input with an AND condition.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6056-I
The visual monitoring data in the Visual Monitoring window has changed.
The latest status will now be acquired.

The visual monitoring data in the Visual Monitoring window will be updated.

S:

When OK is clicked, acquires the latest status of the visual monitoring data.

KAVB6057-I
Do you want to replace the tree configuration being edited?

Confirms that you want to read new visual monitoring data without saving the visual monitoring data being modified on the server.

S:

When the Yes button is clicked, the system replaces the displayed visual monitoring data with new visual monitoring data. When the No button is clicked, the system returns to the startup window without making any changes.

KAVB6058-I
Do you want to close this window, and then logout?

Confirms that you want to log out.

S:

When the Yes button is clicked, the system logs out. When the No button is clicked, the system does not log out.

KAVB6059-I
A corresponding event was not found.

There was no status change event in the monitoring target specified in the status change event search.

S:

Ignores the operation.

O:

Specify a monitoring target that has a status change event, and then execute the operation.

KAVB6060-E
The connection destination server did not respond.

The connection destination server did not respond.

S:

Suspends processing.

O:

Check the version of the connection destination server.

If this message is displayed when saving changes made in the Monitoring Tree (Editing) window, see 9.5(10) Actions to take when an earlier version of JP1/IM - Central Scope or JP1/IM - View is being used in the manual Job Management Partner 1/Integrated Management - Manager Administration Guide.

KAVB6063-E
Undo processing has failed.

An error occurred in processing to undo a monitoring tree editing operation.

S:

Ignores the operation.

O:

Retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6064-E
Redo processing has failed.

An error occurred in processing that cancels processing to undo a monitoring tree editing operation.

S:

Ignores the operation.

O:

Retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6065-E
An attempt to open the file-type file has failed.
file-name

An attempt to open a CSV file while writing or reading failed.

S:

Ignores the operation.

O:

Check the following items:

If reading, does the file to be read exist?

If saving, does the file to be written have a read-only attribute?

If saving, has another program opened the file?

If saving, does file-name contain a character that the system cannot use?

KAVB6066-E
The monitoring node can be copied or moved only to a monitoring group.

Monitoring nodes on a monitoring tree can only be copied or moved to monitoring groups.

S:

Ignores the operation.

O:

Make sure that the destination of the move is a monitoring group.

KAVB6067-I
This operation cannot be undone. Do you want to continue?

Confirms that you want to perform an operation that cannot be undone.

S:

When the Yes button is clicked, the system performs the operation. When the No button is clicked, the system does not perform the operation.

KAVB6068-E
The number of data setup exceeds the maximum value (value).

No new data can be registered because the number of data items that have been specified has reached the maximum.

S:

Ignores the operation.

O:

Delete unnecessary data from the existing data, and then perform the operation again.

KAVB6069-E
An attempt to close the file-type file has failed.
file-name

An attempt to close a CSV file while writing or reading failed.

S:

Continues processing.

O:

Determine whether another program is using the file being read or written.

KAVB6070-E
The number of window running exceeds the maximum value (value).

No new instance of window can be started because the instances of window that are running has reached the maximum.

S:

Ignores the operation.

O:

Close any unnecessary window that is running, and then perform the operation again.

KAVB6071-E
Performing this copy operation might take several minutes. Do you want to continue?

Copying with large numbers of monitoring nodes take time. This message confirms that you want to perform the copy.

S:

When the Yes button is clicked, the system performs the copy. When the No button is clicked, the system does not perform the copy.

KAVB6072-E
The following file is not supported:
file-name

The file file-name that was specified as a background image is an image file in an unsupported format or an image file that exceeds the maximum size (2,048 x 2,048 pixels).

S:

Ignores the operation.

O:

Change the background image selection to an image in a supported format (*.gif, *.jpg, or *.png) no larger than the maximum size (2,048 x 2,048 pixels).

KAVB6073-E
The background image file is invalid.
file-name

The file file-name that was specified as a background image is an image file in an unsupported format or an image file that exceeds the maximum size (2,048 x 2,048 pixels).

S:

Continues processing without displaying the background image.

O:

Change the background image selection to an image in a supported format (*.gif, *.jpg, or *.png) no larger than the maximum size (2,048 x 2,048 pixels).

KAVB6078-I
Do you want to change all child monitoring nodes to monitoring-or-not-monitoring?

Confirms that you want to change all child monitoring nodes to monitoring-or-not-monitoring.

S:

When the Yes button is clicked, the system updates the displayed properties and changes the statuses of the child monitoring nodes to monitoring-or-not-monitoring. When the No button is clicked, the system updates the open properties and does not change the statuses of the child monitoring nodes. When the Cancel button is clicked, the system does not update the properties and returns processing to the Properties window.

KAVB6079-I
Do you want to change monitoring-node and all child monitoring nodes to monitoring-or-not-monitoring?

Confirms that you want to change monitoring-node and all child monitoring nodes to monitoring-or-not-monitoring.

S:

When the Yes button is clicked, the system updates the displayed properties and changes the statuses of monitoring-node and all of its child monitoring nodes to monitoring-or-not-monitoring. When the No button is clicked, the system updates the statuses of the open properties other than the monitoring status, and does not change the monitoring status. When the Cancel button is clicked, the system does not update the properties and returns processing to the Properties window.

KAVB6082-E
A maximum of maximum-number event issue conditions can be specified.

The number of event issue conditions specified exceeds the maximum.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6083-W
If this operation is continued, the monitoring node type will become monitoring-node-type.
Do you want to continue?

Confirms that you want to change the monitoring node type to monitoring-node-type by performing the operation.

S:

When the Yes button is clicked, the system changes the monitoring node type to monitoring-node-type and continues the operation. When the No button is clicked, the system does not change the monitoring node type and does not continue the operation.

KAVB6085-E
The monitoring node name has not been entered.

The monitoring node name, which is a required item, has not been entered.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6086-E
Invalid individual conditions were specified.
Cause: comparison-condition condition for identical attribute already exists.

Invalid individual conditions were specified.

S:

Waits for re-entry of information.

O:

Correct the individual conditions as needed, and then re-enter them.

KAVB6087-E
data has not been entered.

The required item data has not been entered.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6088-E
The same condition-name has already been registered.

Duplicate conditions cannot be entered because condition-name is entered with an AND condition.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6090-E
condition-name is not specified correctly. The usable characters are usable-characters
The name must start with an upper-case character.

The specified condition-name contains an error.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6091-E
A status change condition with the same condition name is already registered.

Multiple status change conditions with the same condition name cannot be specified.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6092-W
Common conditions cannot be restored once deleted. Do you want delete the common condition common-condition-name?

Confirms that you want to delete the specified common condition.

S:

When the Yes button is clicked, the system deletes the common condition. When the No button is clicked, the system does not delete the common condition.

KAVB6093-E
The input range for condition-name is from minimum-value to maximum-value.

Values smaller than minimum-value or larger than maximum-value cannot be specified for condition-name.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6096-E
Please set the conditions of condition-name.

No conditions are specified for condition-name.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6097-E
value of condition-name allows up to maximum characters in total.

The total of value for condition-name exceeds maximum characters.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6099-E
A backslash (\) is entered alone. To specify a backslash, please enter two backslashes (\\).

A single backslash (\) is entered within a condition.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6100-E
More than maximum-number-of-items items of Visual Monitoring window information have been acquired.
Items beyond maximum-number-of-items+1 will not be displayed.

More than maximum-number-of-items items of Visual Monitoring window information have been acquired.

S:

Displays up to maximum-number-of-items and continues processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6101-W
In the central console, processing cannot be performed during an event search.
Please wait until the event search finished.

processing cannot be performed because JP1/IM - Manager is executing an event search.

S:

Displays the Event Console window as the top window.

O:

Wait until the event search has finished.

KAVB6102-W
In the central console view, processing cannot be performed while saving the display event.

During output processing of a CSV file, a logout was executed by Central Scope - View, or a status change event search is running.

The following values are displayed in processing.

Logout

Status change event search

S:

Suspends processing of the logout or status change event search.

O:

Terminate the CSV output processing, and then retry the operation.

KAVB6103-E
Common condition of the selected status change condition is not found. Acquire the latest status.

Monitoring window
A common condition with the selected status change event could not be acquired. Another possibility is that the character string bold is not displayed.

Editing window
The latest definitions have not been acquired, or a common condition with the selected status change event could not be acquired.

S:

Cancels selection of common conditions and opens a window for setting status change conditions.

O:

Monitoring window
Use the data collection tool to collect data, and then contact a system administrator.

Editing window
Acquire the latest definitions. If the same message is displayed after acquiring the latest definitions, use the data collection tool to collect data, and then contact a system administrator.

KAVB6104-E
A system error occurred during a search.

A system error occurred during search processing.

S:

Suspends search processing.

O:

Retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6105-E
Property acquisition has failed.

An attempt to acquire a property failed because an error occurred at an unforeseen location.

S:

Suspends processing.

O:

Retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6106-E
An attempt to acquire the Visual Monitoring window has failed.

An attempt to acquire the Visual Monitoring window failed because an error occurred at an unforeseen location.

S:

Suspends processing.

O:

Retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6107-E
Guide acquisition has failed.

An attempt to acquire the guide failed because an error occurred at an unforeseen location.

S:

Suspends processing.

O:

Retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6108-W
There are 0 common conditions in the server.

Processing was executed to acquire a list of common conditions, but no common conditions were acquired from the server.

S:

Continues processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6109-W
There are 0 common conditions in the server.

After registering common conditions, processing was executed to acquire a list of common conditions, but no common conditions were acquired from the server.

S:

Continues processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6110-W
There are 0 common conditions in the server.

After deleting common conditions, processing was executed to acquire a list of common conditions, but no common conditions were acquired from the server.

S:

Continues processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6111-E
An attempt to acquire common conditions has failed.

An attempt to acquire common conditions failed.

S:

Suspends processing.

O:

Retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6112-E
A search cannot be performed from search-target (node-ID).

The search-target (node-ID) that you tried to start a search for may have been deleted.

S:

Cancels search processing.

O:

Specify the search start location again, and then search again.

KAVB6113-E
A common condition with the same common condition name is already registered.

The same common condition name cannot be specified again.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6114-W
Icons cannot be displayed because the selected monitoring group has more than number-of-child-nodes child nodes.
Details will be displayed.
This message will not displayed until the next startup.

Icons cannot be displayed because the number of child nodes must be less than number-of-child-nodes to display icons.

S:

Displays details. However, the system can display icons if a monitoring group with less than number-of-child-nodes child nodes is selected.

O:

Reduce the number of monitoring nodes in the monitoring group to less than number-of-child-nodes.

KAVB6120-E
Operations cannot be performed because another user is using CSV-file-name.

The file operation cannot be performed because another user is using CSV-file-name.

S:

Suspends the CSV file operation.

O:

Determine whether another user is using the CSV file, and then perform the operation again

KAVB6121-W
CSV-file-name cannot be locked.

An attempt to create a local file failed.

S:

Continues the CSV file operation.

O:

Confirm that you have permission to write to the target folder.

KAVB6193-E
The input range for condition-name is from minimum-value to maximum-value.
condition-name: invalid-input-value

Input exceeded the input range for condition-name.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6194-E
The condition-name condition is duplicated.
condition-name: invalid-input-value

The condition-name condition is duplicated.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6195-E
condition-name is not specified correctly.
Please set an 8-digit hexadecimal number.
condition-name: invalid-input-value

A condition name that is not an 8-digit hexadecimal number was specified.

S:

Waits for re-entry of information.

O:

Reconfigure the condition, and then retry the operation.

KAVB6196-E
A common event monitoring condition cannot be deleted because it is in use.

An attempt to delete a common event monitoring condition failed because the condition is in use.

S:

Cancels the requested operation and continues to accept requests.

O:

Make sure that the common event monitoring condition you tried to delete is not in use as a user monitoring object in a tree, and then retry the operation.

KAVB6210-E
A communication error occurred while attempting to establish a connection.
Host name: connecting-host
Port number: connection-port-number
Details: detailed-information

An attempt to connect to the specified host failed.

Detailed information:

N100: No connection host name was specified.

N101: A message that the ICMP port is unreachable was received at a connected datagram.

N104: Socket communication is not allowed by the security manager.

N105: Another communication error of unknown cause occurred.

N106: An attempt to log in after connection failed.

S:

Suspends processing to connect to the host.

O:

Check the following items, and then perform the operation again.

Was the correct connection host name entered?

Can the port number be used?

Is the connection host running?

Is there a problem communicating with the connection host?

You can also use the jco_smpd_status command to confirm that that the connection host is running.

KAVB6211-E
An error occurred at input stream creation while attempting to establish a connection.
Host name: connecting-host
Port number: connection-port-number

An attempt to connect to the specified host failed.

S:

Suspends processing to connect to the host.

O:

Perform the operation again.

KAVB6212-E
An error occurred in creation of the output stream while attempting to establish a connection.
Host name: connecting-host
Port number: connection-port-number

An attempt to connect to the specified host failed.

S:

Suspends processing to connect to the host.

O:

Perform the operation again.

KAVB6213-E
A communication error occurred while attempting to establish a connection. The host name cannot be converted to an IP address.
Please confirm the host name.
Host name: connecting-host
Port number: connection-port-number
Details: detailed-information

An attempt to connect to the specified host failed.

Detailed information:

N102: The host IP address could not be identified.

N103: The IP address could not be resolved from the host name.

S:

Suspends processing to connect to the host.

O:

Check the following items, and then retry the operation.

Was the correct connection host name entered?

Can the port number be used?

Is the connection host running?

Is there a problem communicating with the connection host?

You can also use the jco_smpd_status command to confirm that the connection host is running.

KAVB6214-E
A TCP communication error occurred while attempting to establish a connection.
Host name: connecting-host
Port number: connection-port-number

An attempt to connect to the specified host failed.

S:

Suspends processing to connect to the host.

O:

Check the following items, and then retry the operation.

Was the correct connection host name entered?

Can the port number be used?

Is the connection host running?

Is there a problem communicating with the connection host?

You can also use the jco_smpd_status command to confirm that the connection host is running.

KAVB6215-E
A communication error occurred while attempting to establish a connection.
Host name: connecting-host
Port number: connection-port-number

An attempt to connect to the specified host failed.

S:

Suspends processing to connect to the host.

O:

Check the following items, and then retry the operation.

Was the correct connection host name entered?

Can the port number be used?

Is the connection host running?

Is there a problem communicating with the connection host?

You can also use the jco_smpd_status command to confirm that the connection host is running.

KAVB6216-E
A communication error occurred while attempting to establish a connection.
Please confirm that the server has started up.
Port number: connection-port-number
Details: detailed-information

An attempt to connect to the specified host failed.

S:

Suspends processing to connect to the host.

O:

Check the following items, and then retry the operation.

Was the correct connection host name entered?

Can the port number be used?

Is the connection host running?

Is there a problem communicating with the connection host?

You can also use the jco_smpd_status command to confirm that the connection host is running.

KAVB6218-E
An error occurred at socket creation while attempting to establish a connection.
Host name: connecting-host
Port number: connection-port-number

An attempt to connect to the specified host failed.

S:

Suspends processing to connect to the host.

O:

Check the following items, and then retry the operation.

Was the correct connection host name entered?

Can the port number be used?

Is the connection host running?

Is there a problem communicating with the connection host?

You can also use the jco_smpd_status command to confirm that the connection host is running.

KAVB6219-E
An I/O error occurred at socket creation while attempting to establish a connection.
Host name: connecting-host
Port number: connection-port-number

An attempt to connect to the specified host failed.

S:

Suspends processing to connect to the host.

O:

Check the following items, and then retry the operation.

Was the correct connection host name entered?

Can the port number be used?

Is the connection host running?

Is there a problem communicating with the connection host?

You can also use the jco_smpd_status command to confirm that the connection host is running.

KAVB6220-E
An error occurred at timeout value setup while attempting to establish a connection.
Host name: connecting-host
Port number: connection-port-number

An attempt to connect to the specified host failed.

S:

Suspends processing to connect to the host.

O:

Collect data, and then contact a network administrator.

KAVB6240-E
An error occurred during data transmission.
Host name: connecting-host
Port number: connection-port-number
Details: detailed-information

Transmission processing failed during communications.

The possible causes are as follows:

Detailed information:

N201: No transmission data

N202: Generation of transmission data failed.

N203: Acquisition of transmission data failed.

N204: No output stream

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6241-E
A communication error occurred during transmission.
Host name: connecting-host
Port number: connection-port-number

A communication error occurred during transmission.

S:

Suspends processing.

O:

Check the following items, and then retry the operation.

Is the connection host running?

Is there a problem communicating with the connection host?

You can also use the jco_smpd_status command to confirm that the connection host is running.

KAVB6250-E
An error occurred while receiving data.
Host name: connecting-host
Port number: connection-port-number
Details: detailed-information

Reception processing failed during communications.

The possible causes are as follows:

Detailed information:

N300: An invalid datagram was received.

N301: Acquisition of reception data failed.

N302: No input stream

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6251-E
A communication error occurred while receiving data.
Host name: connecting-host
Port number: connection-port-number

A communication error occurred while receiving data.

S:

Suspends processing.

O:

Check the following items, and then retry the operation.

Is the connection host running?

Is there a problem communicating with the connection host?

Has the upper limit for the number of instances of JP1/IM - View connected to the connection host been reached?

You can also use the jco_smpd_status command to confirm that the connection host is running.

KAVB6252-E
A timeout occurred while receiving data.
Host name: connecting-host
Port number: connection-port-number

A time-out occurred while receiving data.

S:

Suspends processing.

O:

Check the following items, and then retry the operation.

Is the connection host running?

Is there a problem communicating with the connection host?

Is there an OS problem in the CPU and memory usage status?

Did a large disk I/O operation occur?

Alternatively, contact a network administrator.

You can also use the jco_smpd_status command to confirm that the connection host is running.

KAVB6299-E
A memory shortage occurred while receiving data.

A memory shortage occurred during communications.

S:

Suspends processing.

O:

Close all windows that can be closed, and then retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6300-E
CSV format is incorrect.
Details: detailed-information.
File name: file-name.
Error occurrence location: line-number line column-number

Processing could not continue due to an error in the CSV format.

S:

Suspends processing.

O:

Correct the file as instructed in the detailed information, and then retry the operation.

KAVB6301-E
A memory shortage occurred during CSV I/O processing.
File name: file-name

Processing could not continue due to a memory shortage during CSV I/O processing.

S:

Suspends processing.

O:

Close all windows that can be closed, and then retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6302-E
An I/O error occurred while parsing a CSV file.
File name: file-name

An I/O error occurred during analysis of a CSV file.

S:

Suspends processing.

O:

Make sure that the CSV file is closed, and then retry the operation.

KAVB6305-E
An attempt to reference common change conditions has failed.

An attempt to reference common change conditions failed.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6306-E
A system error occurred while configuring the Visual Monitoring window.

An attempt to configure the Visual Monitoring window failed due to an error.

S:

Suspends processing.

O:

Close the Visual Monitoring window, and then display it again. If the same message appears, use the data collection tool to collect data, and then contact a system administrator.

KAVB6307-W
Icons not linked with monitoring nodes was extracted.
Visual Monitoring window name: Visual-Monitoring-window-title

Monitoring nodes that are not linked to a monitoring tree were detected in the Visual Monitoring window information that was read.

S:

Continues processing.

O:

Use a Visual Monitoring window compatible with the current monitoring tree or use the original monitoring tree that created the Visual Monitoring window.

KAVB6308-E
A common change condition cannot be set.

An attempt to set common change conditions failed.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6309-E
The specified Visual Monitoring window information cannot be referenced.
Visual Monitoring window ID: Visual-Monitoring-window-ID

An attempt to reference Visual Monitoring window information (ID: Visual-Monitoring-window-ID) failed.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6310-E
Tree information cannot be set.

An attempt to set tree information failed.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6311-E
Tree information cannot be referenced.
TreeID: tree-ID

An attempt to reference tree information (ID: tree-ID) failed.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6312-E
Information that cannot be used in the connection destination server is included in the tree information.
For details, please refer to the log file.
File name: log-file-name

Processing could not continue because information that cannot be used in the connection destination server was included in the tree information.

The possible causes are as follows:

If the detail code is 0A, a background image was set up.

If the detail code is 0B, icon coordinates were set up.

If the detail code is 0C, the number of status change conditions exceeds the maximum of 4.

If the detail code is 0D, a condition other than Match was set in individual conditions for the status change conditions.

If the detail code 0E, a common condition that does not exist in the status change conditions was set up.

S:

Suspends processing.

O:

Correct the tree according to the detailed information below.

If the detail code 0A, in the Property window click Background Image Setting, and in the window that is displayed click No background image.

If the detail code 0B, select the parent monitoring node, and then click Set in Equal Intervals.

If the detail code 0C, set the number of status change conditions to 4.

If the detail code 0D, change the individual conditions of the status change conditions to Match.

If the detail code 0E, acquire the latest definitions. Alternatively, reset the common conditions.

KAVB6401-E
An exception (exception-class-name) occurred and message construction failed.

An exception occurred, but an attempt to construct a message failed.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6441-E
An error occurred while creating the log file "log-file-name".

An attempt to create a log file failed.

S:

Suspends creation of the log file and continues processing.

O:

Make sure that the file system or device to be written to has sufficient free space and that the log file has access permission, and then contact a system administrator.

KAVB6442-E
An error occurred while outputting to the log file "log-file-name".

An attempt to write to a log file failed.

S:

Suspends write processing to the log file and continues processing.

O:

Make sure that the file system or device to be written to has sufficient free space and that the log file has access permission, and then contact a system administrator.

KAVB6500-E
A system error occurred during internal processing.

A system error occurred during data processing.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6501-E
A memory shortage occurred during internal processing.

A memory shortage occurred during data processing.

S:

Suspends processing.

O:

Close all windows that can be closed, and then retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6502-E
A system error occurred during internal processing.

A system error occurred during data processing.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6503-E
A memory shortage occurred during internal processing.

A memory shortage occurred during data processing.

S:

Suspends processing.

O:

Close all windows that can be closed, and then retry the operation. If the same message is displayed, use the data collection tool to collect data, and then contact a system administrator.

KAVB6504-E
An error occurred while sending data.
Details: detailed-information

An error occurred while creating a transmission datagram.

Detailed information:

Datagram type

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6505-E
An error occurred while receiving data.
Details: detailed-information

An error occurred while parsing a received datagram.

Detailed information:

Datagram type

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6506-E
An error occurred while receiving data.
Details: detailed-information-1
Details: detailed-information-2

An error occurred while parsing a received datagram.

Detailed information:

Datagram type

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6507-E
An error occurred while receiving error messages.
Details: detailed-information

An error occurred while parsing an error message datagram.

Detailed information:

Datagram type

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6508-E
An irrecoverable system error occurred. Please log in again.

An unrecoverable system error occurred. Log in again.

S:

Suspends processing.

O:

Restart JP1/IM - Manager.

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6509-E
A monitoring node was not found. Please acquire the latest monitoring tree.

A monitoring node may have been deleted from the monitoring tree.

S:

Suspends processing.

O:

Monitoring Tree window
On the menu bar, click Update Tree to Latest Status.

Monitoring Tree (Editing) window
Create a new tree.

KAVB6550-E
An error occurred when reading the system environment setup file.
Details: Row line-number

An error occurred while reading the system environment setup file.

Detailed information:

Line number where error occurred.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6551-E
An error occurred when reading the system environment setup file.
Details: item

An error occurred while reading the system environment setup file.

Detailed information:

Item where error occurred.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6560-E
An error occurred when reading the user environment setup file.
Details: Row line-number

An error occurred while reading the user environment setup file.

Detailed information:

Line number where error occurred.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6561-E
Error occurred when reading the setup file of user environment.
Details: item

An error occurred while reading the user environment setup file.

Detailed information:

Item where error occurred.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6570-E
An error occurred when reading the system monitoring object definition file.
Details: Row line-number

An error occurred while reading the system monitoring object definition file.

Detailed information:

Line number where error occurred.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

KAVB6571-E
An error occurred when reading the system monitoring object definition file.
Details: item

An error occurred while reading the system monitoring object definition file.

Detailed information:

Item where error occurred.

S:

Suspends processing.

O:

Use the data collection tool to collect data, and then contact a system administrator.

[Contents][Back][Next]

[Trademarks]