Job Management Partner 1/Integrated Management - Manager Messages

[Contents][Index][Back][Next]

2.5 Messages related to automated actions and changes in severity level (KAVB4001 to KAVB6000)

KAVB4001-W

Cannot open specified file (file-name). : system-error-message

The file cannot be opened. There may be no access permission for the specified file.

S:
Stops processing for the specified file.

O:
Take the corrective action given for the system error message.

KAVB4002-W

Event Server cannot be connected.

The event server is not running or has stopped.

S:
Attempts to reconnect to the event server.

O:
Restart the event server.

KAVB4003-I

Event Server is connected.

The event server is connected successfully.

KAVB4004-E

An invalid logical host name(logical-host-name) is specified.

The JP1_HOSTNAME environment variable or the logical host name specified by the -h option is incorrect.

S:
Aborts processing.

O:
Correct the JP1_HOSTNAME environment variable or the setting of the -h option of the command, and then retry the operation.

KAVB4005-W

No Logical Host Name is specified.

No logical host name is specified for the JP1_HOSTNAME environment variable.

S:
Continues processing using the default logical host name.

O:
If a logical host name must be specified, specify an environment variable, and then retry the operation.

KAVB4006-W

An illegal option(-option) was specified.

An invalid option was specified.

S:
Ignores the specified option value and continues processing.

O:
Correct the option setting, and then retry the operation.

KAVB4007-W

No value is specified for option (-option).

No value is specified for an option that requires a value.

S:
Aborts command processing.

O:
Correct the option setting, and then retry the operation.

KAVB4008-W

Extra argument(S) exist.

Extra argument(s) are specified.

S:
Aborts processing.

O:
Correct the argument(s), and then retry the operation.

KAVB4009-W

Invalid value for option(-specified-option).

There is an error in the value of the specified option.

S:
Aborts command processing.

O:
Correct the option value, and then retry the operation.

KAVB4010-W

Option(-specified-option) appears twice or more.

The same option is specified more than once.

S:
Ignores the specified option and continues processing.

O:
Correct the option value, and then retry the operation.

KAVB4011-W

An invalid option combination exists.

Options that cannot be specified at the same time are specified.

S:
Ignores the specified options and continues processing.

O:
Specify the options correctly.

KAVB4012-W

An invalid host name is specified for the JP1_HOSTNAME environment variable.

The logical host name specified for the JP1_HOSTNAME environment variable exceeds 255 bytes, or the logical host name is not specified in the command definition as a logical host.

S:
Aborts processing.

O:
Correct the JP1_HOSTNAME environment variable setting, and then retry the operation.

KAVB4013-I

Filtering will be performed according to the event acquisition filter.

Filtering is performed according to the event acquisition filter.

KAVB4014-I

The event acquisition filter definition file was read. The read definitions will be used for processing from the next received event. (filter name = filter-name, last received event = arrival-time, serial number in event DB = serial-number-in-event-DB)

The event acquisition condition definition file was read by the jcochfilter command or an operation from JP1/IM - View. For events subsequent to the event indicated by the displayed serial number in the event database, event acquisition processing is performed according to the read definition information. If the event infrastructure service has not received an event, hyphens (--) are displayed in place of the event arrival time and serial number.

KAVB4015-W

An essential option (essential-option) is not specified.

A required option is not specified.

S:
Terminates processing.

O:
Specify the option correctly, and then retry the operation.

KAVB4020-W

Failed to get Common Defined Information(information-name). : maintenance-information

An attempt to acquire the displayed common definition information failed.

S:
Continues processing using the default value.

O:
Correct the value of the common definition information, and then retry the operation.

KAVB4021-W

File name is too long.

The full name of the file is 256 bytes or longer because the installation path or the directory or file name specified in the command definition is too long.

S:
Assumes that there is no file and continues processing.

O:
Shorten the installation path, and then re-install JP1/IM - Manager, or shorten the specified value in the command definition.

KAVB4022-E

No executing permission

There is no permission to execute the command.

S:
Aborts processing.

O:
Log in as a user with execution permission, such as an administrator, and then retry the operation.

KAVB4023-W

An invalid value is specified for common definition information.(common-definition-name=value)

A common definition information setting is incorrect.

S:
Continues processing using the default value.

O:
Correct the common definition information value, and then retry the operation.

KAVB4024-I

regular-expression-method(unique-to-JP1-or-extended-normal-expression) will be used for the regular expression.

The regular expression method fetched as the command definition information will be output.

KAVB4050-I

Automatic Action was started. : logical-host-name

Automated action processing will start.

S:
Subsequent events are subject to automated action processing. However, subsequent events are not processed when the system switching function is used.

KAVB4051-I

Automatic Action was terminated. : logical-host-name

Automated action processing will end.

S:
Stops automated action processing.

KAVB4052-I

Reading Action Definition File(automated-action-definition-file-name).

The automated action definition file will be reloaded because the jcachange command was executed.

S:
Reloads the automated action definition file and operates according to the displayed automated action definition file information.

KAVB4053-I

Suspended Automatic Action.

Automated action is suspended due to the specification of the -n option of the jcachange command.

S:
Suspends execution of the automated action.

KAVB4054-E

Automatic Action was terminated abnormally. (Hostname : host-name)

The automated action of the host (host-name) ended abnormally due to an error that prevents the automated action from continuing.

O:
On the host where automated action ended abnormally, collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4055-I

The action definition file was read and the automatic action function status was changed to operating. The processing will be based on the definitions read from the subsequently received (arrival-time-of-most-recently-processed-event (YYYY/MM/DD HH:MM:SS)) events. (Definition=total-number-of-effective-definitions/total-number-of-definitions-in-file, SEQNO=serial-number-of-most-recently-processed-event)

The automated action definition file was read by the jcachange command, or the automated action function was placed in operating status. For events subsequent to the event indicated by the displayed serial number in the event database, action processing is performed according to the read action information.

If the automated action function has not received an event, hyphens (--) are displayed in place of the event arrival time and serial number.

KAVB4056-I

Automatic action was suspended. Automatic actions cannot be executed for the subsequently received (arrival-time-of-most-recently-processed-event (YYYY/MM/DD HH:MM:SS)) events. (SEQNO=serial-number-of-most-recently-processed-event)

Automated action is suspended due to the specification of the -n option of the jcachange command. For events subsequent to the event indicated by the displayed serial number in the event database, action processing is performed.

If the automated action function has not received an event, hyphens (--) are displayed in place of the event arrival time and serial number.

S:
Suspends execution of the automated action for subsequent events

KAVB4057-I

The event base service was connected.

Event Base Service was connected from Automatic Action Service.

KAVB4058-E

An attempt to connect to the event base service failed.

An attempt to connect to Automatic Action Service from Event Base Service failed.

S:
Stops waiting for a connection from Event Base Service and continues processing.

O:
Execute the jco_spmd_status command to determine whether Event Base Service is running. If it is running, Automatic Action Service may be waiting for a connection because startup processing of Event Base Service is taking a long time. Carefully review the retry setting of Event Base Service. If a connection cannot be made after the retry setting is changed, or if Event Base Service is not running, collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4059-I

The event base service was disconnected.

The Connection between Automatic Action Service and Event Base Service was ended.

S:
Does not accept further action requests from Event Base Service.

KAVB4060-E

An attempt to receive an action request from the event base service failed. :(Last SEQNO: serial-number-that-Automatic-Action-Service-most-recently-received-from-Event-Base-Service)

An attempt to receive an action request from Event Base Service failed.

S:
Ends the connection with Event Base Service and does not accept action requests until the next time Event Base Service is connected.

O:
Collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4101-W

Action Definition file (file-name) does not exist.

There is no automated action definition file.

S:
Suspends processing of the automated action definition file.

O:
Correct the error, and then retry the operation.

KAVB4120-W

Invalid Event AND condition. (line: line-number, file: file-name)

An event AND condition is specified at the beginning of the line or for an invalid action definition. Another possibility is that a blank space is missing following the description of the event AND condition.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4121-W

Action Definition file (file-name) ends with Continuation character.

The automated action definition file ends with a continuation character (\).

S:
Ignores the automated action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4122-W

Length of parameter exceeds maximum-length bytes. (line: line-number, file: file-name)

The length of the parameter (including the continuation character (\)) of the action definition exceeded the maximum length in bytes.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4123-W

Invalid Parameter Group Number. (line: line-number, file: file-name)

The parameter group number of the action definition is other than 0 to 9, or a blank space is missing after the description of the parameter group number.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4124-W

Cannot specify Event AND Condition when Parameter Group Number is specified. (line: line-number, file: file-name)

Both a parameter group number and an event AND condition are specified for the action definition.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4125-W

Invalid Event ID. (line: line-number, file: file-name)

There is no description of the event ID of an action definition, or the description is incorrect, or a blank space is missing after the description of the event ID.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4126-W

Invalid character specified. (line: line-number, file: file-name)

An invalid character is specified for the action definition.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4127-W

Invalid regular expression. (line: line-number, file: file-name)

There is an error in the description of the regular expression of the action definition.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4128-W

Punctuation mark(S) (:) not specified. (line: line-number, file: file-name)

The action cannot be checked because no colon (:) is specified.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4129-W

Action not specified. (line: line-number, file: file-name)

A user name, environment variable file name, or execution host or group name is specified, but an action is not specified.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4130-W

Invalid User Name. (line: line-number, file: file-name)

The description of the user name is incorrect.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4131-W

Invalid Environment File name. (line: line-number, file: file-name)

The description of the environment variable file name is incorrect.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4132-W

Invalid Execution Host or Group. (line: line-number, file: file-name)

The description of the execution host or group name is incorrect.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4133-W

More than 10 event AND conditions are specified in Action Definitions. (line: line-number, file: file-name)

An event AND condition is specified for more than 10 action definitions.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4134-W

There is no effective Action Definition for the Action Definition File. (file: file-name)

There is no effective action definition in the automated action definition file.

S:
Continues processing without setting the automated action definition.

O:
Correct the error, and then retry the operation.

KAVB4135-W

Invalid Severity of Event Extended Attribute. (line: line-number, file: file-name)

In an action definition, there is an error in the specification of the severity level of an extended event attribute.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4136-W

More than 100 Event Extended Attributes are specified. (line: line-number, file: file-name)

More than 100 extended event attributes are specified for one action definition.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4137-W

Invalid Event Extended Attribute Name. (line: line-number, file: file-name)

The specification of an extended event attribute name is incorrect.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4138-W

Invalid Event Extended Attribute Value. (line: line-number, file: file-name)

The specification of an extended event attribute name is incorrect.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4139-W

The version of the action definition file is invalid. (line: line-number, file: file-name)

The version information is incorrect.

S:
Assumes that the version of the automated action definition file is 2 and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4140-W

The location of the action status monitoring parameter is invalid. (line: line-number, file: file-name)

The location of the description of the automated action status monitoring parameter is incorrect.

S:
Ignores the automated action status monitoring parameter at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4141-W

The action status monitoring parameter is invalid. (line: line-number, file: file-name)

The description of the automated action status monitoring parameter is incorrect.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4142-W

The suppression time is invalid. (line: line-number, file: file-name)

The description of the suppression time is incorrect.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4143-W

The delay monitoring time is invalid. (line: line-number, file: file-name)

The description of the delay monitoring time is incorrect.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4144-W

The location of the action definition file version is invalid. (line: line-number, file: file-name)

The location of the description of the automated action definition file version is incorrect.

S:
Ignores the version of the automated action definition file at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4145-W

The Suppression Time cannot be specified because event AND conditions are specified. (line: line-number, file: file-name)

The suppression time is specified for the action definition where the event AND condition is specified.

S:
Ignores the action definition specified for the event AND condition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB4146-W

The length of Action parameter exceeds maximum-length bytes. (line: line-number, file: file-name)

The length of the action parameter of the action definition exceeds maximum-length bytes.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error in the relevant line in the action definition file.

KAVB4147-W

The length of the event monitoring condition parameter exceeds maximum-length bytes. (line = line-number, file = file-name)

The length of the parameter that can be specified for the event monitoring condition of the automated action definition parameter exceeds maximum-length bytes.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error in the relevant line in the action definition file.

KAVB4150-W

Failed to read data from Action Information file (file-name). : system-error-message

An attempt to acquire data from the action information file failed.

S:
Aborts processing of the action information file.

O:
Take the corrective action given for the system error message.

KAVB4151-W

Failed to write data to Action Information file (file-name). : system-error-message

An attempt to write data to the action information file failed.

S:
Aborts processing of the action information file.

O:
Take the corrective action given for the system error message.

KAVB4152-I

Information for an unfinished action was erased.

Data was overwritten because the capacity of the action information file reached the upper limit. The data for the unfinished action in the action information file prior to overwriting was deleted.

S:
Overwrites data. Actions for which information was deleted are not re-executed when system switching occurs.

O:
Carefully review the capacity of the action information file.

KAVB4153-E

Failed to open Action Information File(action-information-file-name). : system-error-message

An attempt to open the specified action information file failed.

S:
Terminates the process where the error occurred.

O:
Take the corrective action given for the system error message.

KAVB4154-E

Specified file(action-information-file-name) is not Action Information File.

The file specified by the argument of the common definition or the command is not an action information file, or the file is corrupted.

S:
Terminates the process where the error occurred.

O:
Specify the correct action information file, or re-create the action information file.

KAVB4180-W

Failed to open Action Host Name file (file-name). : system-error-message

An attempt to open the action host name file failed.

S:
Does not back up the action and host name to the action host name file.

O:
Take the corrective action given for the system error message.

KAVB4181-W

Failed to write data to Action Host Name file (file-name). : system-error-message

An attempt to write data to the action host name file failed.

S:
Aborts processing of the action host name file.

O:
Take the corrective action given for the system error message.

KAVB4182-W

Failed to read data from Action Host Name file (file-name). : system-error-message

An attempt to acquire data from the action host name file failed.

S:
Aborts processing of the action host name file.

O:
Take the corrective action given for the system error message.

KAVB4250-E

Cannot connect with Command Control because the logical host name could not be obtained. : maintenance-information

A connection could not be made to command control because the logical host name could not be obtained.

S:
Terminates the process where the error occurred.

O:
Specify the correct logical host name.

KAVB4251-E

Error that prevented processing occurred in Command Execution. : maintenance-information

Processing cannot continue because an error occurred while (re)connecting to command execution.

S:
Terminates the process where the error occurred.

O:
Check the status of command execution, and take the corrective action given.

KAVB4252-I

Established connection with Command Execution.

A connection with command execution has been made.

KAVB4253-W

Failed to connect with Command Execution. : maintenance-information

An attempt to connect to command execution failed.

S:
Attempts to reconnect to command execution.

O:
Check the status of command execution. If command execution is not running, start it.

KAVB4254-E

Failed to initialize communication Infrastructure. : maintenance-information

An attempt to initialize the communication infrastructure failed.

S:
Terminates the process where the error occurred.

O:
Check the settings file, and take the corrective action given.

KAVB4350-W

Error occurred in Environment File(environment-variable-file-name). : system-error-message

An error occurred during operation of the environment variable file when an attempt was made to execute an action related to transition.

S:
Does not execute the action and continues processing.

O:
Refer to the system error message to resolve the error.

KAVB4400-E

The run time of an action for an event exceeded the action delay monitoring time.(Event_ID=event-ID, SEQNO=serial-number-in-event-database, Execution Host=action-execution-host, Action Serial Number=action-serial-number) Delay monitoring notifications will not be sent until suppression of the function for sending notifications to the action delay monitor is canceled.

The monitoring time elapsed, but the monitored action did not end.

S:
Executes the notification function.

O:
Check the settings of the target action to determine whether the monitoring time for the action is appropriate.
If the monitoring time is not appropriate, specify an appropriate monitoring time.
If the monitoring time is appropriate, the action is delayed. Take corrective action.

KAVB4401-I

Suppression of the function for sending notifications to the action delay monitor was canceled.

Suppression of the function for sending notifications to the action delay monitor was canceled.

S:
Executes the notification function when the action monitoring time elapses.

KAVB4402-E

An event status is abnormal.(event ID = event-ID, event serial number = serial-number-in-event-database, execution host = action-execution-host, action serial number = action-serial-number) Status monitoring notifications will not be sent until suppression of the function for sending notifications to the action status monitor is canceled

The action was placed in Fail or Error status.

S:
Executes the notification function.

O:
The target action cannot be executed. Remove the cause of the problem, and then retry the action.

KAVB4403-I

Suppression of the function for sending notifications to the action status monitor was canceled.

Suppression of the function for sending notifications to the action status monitor was canceled.

S:
Executes the notification function when an action is placed in abnormal status.

KAVB4404-E

Although the run time of an action exceeded the action delay monitoring time, an action delay notification event could not be sent because no action information exists in the action information file.(action serial number = action-serial-number) Delay monitoring notifications will not be sent until suppression of the function for sending notifications to the action delay monitor is canceled.

An attempt was made to issue an action delay notification event, but the action delay notification event could not be issued because the action information file does not contain any action information.

S:
Continues processing.

O:
Determine whether the capacity of the action information file is sufficient. If it is not, re-estimate the required capacity of the action information file, and specify an appropriate capacity.

KAVB4405-E

Although an action status is abnormal, an action state notification event could not be sent because no action information exists in the action information file. Status monitoring notifications will not be sent until suppression of the function for sending notifications to the action status monitor is canceled.: maintenance-information

An attempt was made to issue an action error status notification event, but the action error status notification event could not be issued because no action information exists in the action information file.

S:
Continues processing.

O:
Determine whether the capacity of the action information file is sufficient. If it is not, re-estimate the required capacity of the action information file, and specify an appropriate capacity.

KAVB4406-W

Information about actions for delay monitoring have been overwritten in the action information file.

The monitored action was wrapped from the action information file. Therefore, notification could not be sent when the delay monitoring time elapsed.

S:
Reports that a monitored action was overwritten due to information being wrapped around the action information file.

O:
The monitored action was wrapped from the action information file. Notification cannot be sent even though this action is delayed. To check the execution status of this action, execute the jcocmdshow command.

KAVB4407-E

The definition file for automatic action notification(file-name) cannot be opened. : maintenance-information

The automatic action notification definition file cannot be opened.

S:
  • If starting JP1/IM - Manager, uses the default value for operation.
  • If executing the jco_spmd_reload command, takes over the current definition and continues processing.

O:
Check the following items, and then execute the jco_spmd_reload command.
  • Does the automatic action notification definition file exist?
  • Is access permission assigned correctly?

KAVB4408-E

There is an error in the definition file for automatic action notification(file-name). The default value will be used. (line line-number) : detailed-information

The default value is used for operation because an invalid value is specified in the automatic action notification definition file.

S:
  • If starting JP1/IM - Manager, uses the default value for operation.
  • If executing the jco_spmd_reload command, takes over the current definition and continues processing.

O:
Make sure that the definition file is defined correctly, and then execute the jco_spmd_reload command.

KAVB4409-E

The notification command (command) could not be executed.: maintenance-information

The notification command could not be executed.

S:
Continues processing.

O:
Make sure that the automatic action notification definition file is defined correctly, and then execute the jco_spmd_reload command.

KAVB4420-W

Cannot execute action because substrings could not be obtained. (line: line-number) : maintenance-information

The action corresponding to line-number in the automated action definition file could not be executed because an attempt to obtain substrings failed.

S:
Does not execute the action.

O:
Check the contents of the automated action definition file.

KAVB4421-W

Cannot execute action because command line is too long. (line: line-number) : maintenance-information

The action corresponding to line-number in the automated action definition file could not be executed because the command line was too long.

S:
Does not execute the action.

O:
Check the contents of the automated action definition file.

KAVB4422-W

Cannot execute action because the host name could not be obtained. (line: line-number) : maintenance-information

The action corresponding to line-number in the automated action definition file could not be executed because the host name assigned to execute the action could not be obtained.

S:
Does not execute the action.

O:
Check the contents of the automated action definition file.

KAVB4423-W

Cannot execute action because Command Execution is not running. (line: line-number, host: host-name) : maintenance-information

The action corresponding to line-number in the automated action definition file could not be executed on the host because command execution was not running.

S:
Does not execute the action.

O:
Check the contents of the automated action definition file.

KAVB4424-W

Cannot execute action. (line: line-number, host: host-name) : maintenance-information

The action corresponding to line-number in the automated action definition file could not be executed on the host.

S:
Does not execute the action.

O:
Check the contents of the automated action definition file.

KAVB4425-I

Expired AND events were abandoned. (number of events: number-of-events)

Expired events were discarded because the AND event storage period elapsed.

KAVB4426-W

Cannot execute action because Execution Host or Group name is too long. (line: line-number) : maintenance-information

The action corresponding to the line number in the automated action definition file could not be executed because the execution host name/group name after conversion to the information in the received event was too long.

S:
Does not execute the action.

O:
Check the automated action definition file and the event that triggered action execution.

KAVB4427-W

Cannot execute action because User Name is too long. (line: line-number) : maintenance-information

The action corresponding to the line number in the automated action definition file could not be executed because the user name after conversion to the information in the received event was too long.

S:
Does not execute the action.

O:
Check the automated action definition file and the event that triggered action execution.

KAVB4428-W

Cannot execute action because Environment Definition File name is too long. (line: line-number) : maintenance-information

The action corresponding to the line number in the automated action definition file could not be executed because the environment variable file name after conversion to the information in the received event was too long.

S:
Does not execute the action.

O:
Check the automated action definition file and the event that triggered action execution.

KAVB4429-W

The action could not be executed because a memory shortage occurred. (line = line-number) maintenance-information

The action corresponding to line-number in the automated action definition file could not be executed because a memory shortage occurred during conversion to the information in the received event.

S:
Does not execute the action.

O:
Make sure that sufficient system memory is allocated. Also make sure that the OS is operating normally.

KAVB4430-I

Execution of the action for an event was requested.(Event_ID=event-ID, SEQNO=serial-number-in-event-database)

The action execution request was registered in the command control queue.

KAVB4431-I

Execution of the action for an event ended normally.(EVENT_ID=event-ID, SEQNO=serial-number-in-event-database, Return_code=termination-code)

Execution completion notification for the action was received from command control. The status is action completed.

KAVB4432-E

Automatic action or command control of the action for an event ended abnormally.(EVENT_ID=event-ID, SEQNO=serial-number-in-event-database)

Automated action or command control of the action ended abnormally and the action was placed in Error or Fail status.

KAVB4433-I

Execution of the action for an action state notification event was requested.(Event_ID=event-ID, SEQNO=serial-number-in-event-database)

The execution request of an action was registered in the command control queue.

KAVB4434-I

Execution of the action for an action state notification event ended normally.(EVENT_ID=event-ID, SEQNO=serial-number-in-event-database, Return_code=termination-code)

The action was ended by an execution completion notification from command control.

KAVB4435-E

Automatic action or command control of the action for an action state notification event ended abnormally.(EVENT_ID=event-ID, SEQNO=serial-number-in-event-database)

Automated action or command control of the action ended abnormally and the action was placed in Error or Fail status.

KAVB4436-W

Although Execution of the action for an event was requested, an action state notification event could not be sent because no action information exists in the action information file. : maintenance-information

Execution of the action was requested, but an action state notification event could not be sent because the action information file does not contain any action information.

S:
Continues processing.

O:
Determine whether the capacity of the action information file is sufficient. If it is not, re-estimate the required capacity of the action information file, and specify an appropriate capacity.
If the capacity of the action information file is appropriate, there may have been a delay in execution of the action. Consider the following factors.
  • When more than one action is performed for one event, you can improve execution efficiency and reduce execution delay by placing those actions in one batch file (shell script) and executing the batch file.
  • If output to standard output or standard error that is not necessary for the action is performed, consider suppressing output. Suppressing output can improve execution efficiency and reduce execution delay.
  • When using the default setting to execute a command by automated action, an execution delay occurs because the next command is not executed until execution of the current command is completed. To reduce execution delay, see 11.4 Considerations for automated actions in the manual Job Management Partner 1/Integrated Management - Manager Overview and System Design Guide for the procedure to change the setting to parallel.

KAVB4437-W

Although Execution of the action for an event ended normally, an action state notification event could not be sent because no action information exists in the action information file. : maintenance-information

Execution of the action ended, but the action state notification event could not be sent because the action information file does not contain any action information.

S:
Continues processing.

O:
Determine whether the capacity of the action information file is sufficient. If it is not, re-estimate the required capacity of the action information file, and specify an appropriate capacity.
If the capacity of the action information file is appropriate, there may have been a delay in execution of the action. Consider the following factors.
  • When more than one action is performed for one event, you can improve execution efficiency and reduce execution delay by placing those actions in one batch file (shell script) and executing the batch file.
  • If output to standard output or standard error that is not necessary for the action is performed, consider suppressing output. Suppressing output can improve execution efficiency and reduce execution delay.
  • When using the default setting to execute a command by automated action, an execution delay occurs because the next command is not executed until execution of the current command is completed. To reduce execution delay, see 11.4 Considerations for automated actions in the manual Job Management Partner 1/Integrated Management - Manager Overview and System Design Guide for the procedure to change the setting to parallel.

KAVB4438-E

Although automatic action or command control of the action for an event ended abnormally, an action state notification event could not be sent because no action information exists in the action information file. : maintenance-information

Automated action or command control of the action ended abnormally, but an action state notification event could not be issued because the action information file does not contain any action information.

S:
Continues processing.

O:
Determine whether the capacity of the action information file is sufficient. If it is not, re-estimate the required capacity of the action information file, and specify an appropriate capacity.
If the capacity of the action information file is appropriate, there may have been a delay in execution of the action. Consider the following factors.
  • When more than one action is performed for one event, you can improve execution efficiency and reduce execution delay by placing those actions in one batch file (shell script) and executing the batch file.
  • If output to standard output or standard error that is not necessary for the action is performed, consider suppressing output. Suppressing output can improve execution efficiency and reduce execution delay.
  • When using the default setting to execute a command by automated action, an execution delay occurs because the next command is not executed until execution of the current command is completed. To reduce execution delay, see 11.4 Considerations for automated actions in the manual Job Management Partner 1/Integrated Management - Manager Overview and System Design Guide for the procedure to change the setting to parallel.

KAVB4439-E

An attempt to write data to the action re-execution file has failed. (action serial number = action-serial-number, detailed information = detailed-information)

An attempt to write data to the action re-execution file failed.

S:
Stops writing data to the action re-execution file of the action indicated by the action serial number. Continues processing.

O:
Check the execution results of the action indicated by the action serial number, and, if necessary, retry the operation.
Also check the following items:
  • Is sufficient disk space allocated?
  • Is sufficient system physical memory and virtual memory allocated?
  • Is access permission assigned for any of the folders (directories) in the paths below?

In Windows:
Physical host:
Console-path\log\action
Logical host:
shared-folder\jp1cons\log\action

In UNIX:
Physical host:
/var/opt/jp1cons/log/action
Logical host:
shared-directory/jp1cons/log/action
If the problem cannot be resolved, check the following OS log items to determine whether a shortage occurred with OS resources such as file descriptors.
  • In Windows: Windows event log
  • In UNIX: syslog
If a resource shortage did not occur, use the data collection tool to collect data, and then contact a system administrator.

KAVB4450-E

I/O error occurred. : maintenance-information

An I/O error occurred in Automatic Action Service or Event Base Service while defining an action or re-executing an action from JP1/IM - View or executing the jcastatus or jcachange command. When the above window operation or command is executed, a request for processing is sent to Automatic Action Service or Event Base Service. However, because more than one window operation or command execution occurred simultaneously, each service was unable to handle processing.

When sending of a request for processing failed, execution of the command was retried. All retries failed.

S:
Aborts processing.

O:
Wait awhile, and then re-execute the command.

KAVB4500-W

Duplicate pre-conversion characters have been specified in the configuration file for converting information during event succession. (line = line-number)

Pre-conversion characters specified in the configuration file for converting information are duplicated.

S:
Ignores duplicated definitions and continues processing.

O:
The line number indicated in the message is incorrect. Correct the error.

KAVB4501-W

An invalid pre-conversion character has been specified in the configuration file for converting information during event succession. (line = line-number)

A pre-conversion character specified in the configuration file for converting information is invalid.

S:
Ignores the invalid definition and continues processing.

O:
The line number indicated in the message is incorrect. Correct the error.

KAVB4502-W

An invalid post-conversion character string has been specified in the configuration file for converting information during event succession. (line = line-number)

A post-conversion character string specified in the configuration file for converting information is invalid.

S:
Ignores the invalid definition and continues processing.

O:
The line number indicated in the message is incorrect. Correct the error.

KAVB4503-W

The number of definitions specified in the configuration file for converting information during event succession has exceeded the maximum of maximum-number.

The number of definitions specified in the configuration file for converting information exceeds the maximum number allowed (maximum-number items).

S:
Ignores definitions beyond the maximum number allowed and continues processing.

O:
Carefully review and correct the number of definitions.

KAVB4504-W

The syntax of a definition, specified in the configuration file for converting event succession information, is invalid. (line = line-number)

A definition specified in the configuration file for converting information is invalid.

S:
Ignores the invalid definition and continues processing.

O:
The line number in the message indicates the location of the error. Correct the error.

KAVB4505-I

The configuration file for converting event succession information was read.

The configuration file for converting information was read.

KAVB4506-W

An attempt to read the configuration file for converting event succession information has failed. (cause = reason)

An attempt to read the configuration file for converting information failed.

S:
Stops reading of the configuration file for converting information and continues processing.

O:
Determine whether the configuration file for converting information can be read. If the file can be read, check the OS log to determine whether a shortage occurred with OS resources such as file descriptors.
  • In Windows: Windows event log
  • In UNIX: syslog
If a resource shortage did not occur, use the data collection tool to collect data, and then contact a system administrator.

KAVB4550-W

The item cannot be specified because a rule is specified for the action. (line = line-number, file = file-name)

If an action for rule startup request is specified, you cannot specify the user name, target host name or group name, and environment variable file name.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error in the corresponding line in the action definition file.

KAVB4551-E

The rule cannot be specified for the action. (line = line-number)

You cannot specify <RULE> for the action because it is an action for rule startup request.

S:
Suspends creation of the action definition.

O:
Correct the error in the corresponding line in the action definition file.

KAVB4600-I

The severity change definition has been read. Next, processing will be performed using the definition read from the received event. (arrival time of the last received event = arrival-time, serial number in the event database = serial-number-in-event-database)

The severity changing definition file was read. For events subsequent to the event indicated by the serial number in the event database, the severity will be changed according to the contents of the read definition.

KAVB4602-W

The version information for the severity changing definition file is invalid. (line = line-number, file = file-name)

The version information is invalid.

S:
Assumes that the version of the severity changing definition file is 1 and continues processing.

O:
Correct the error in the severity changing definition file, and then retry the operation.

KAVB4603-W

The location of the severity changing definition file version is invalid. (line = line-number, file = file-name)

The file version is not specified at the beginning of the severity changing definition file.

S:
Assumes the default file version and continues processing.

O:
Specify the file version at the beginning of the severity changing definition file.

KAVB4604-W

The name of a definition in the severity changing definition file exceeds the maximum length. (line = line-number, file = file-name)

The length of the definition block name of the severity changing definition file exceeds the maximum.

S:
Ignores the definition block and continues processing.

O:
Correct the error in the corresponding line in the severity changing definition file.

KAVB4605-W

No name has been defined for the severity changing definition file. (line = line-number, file = file-name)

The definition block name of the severity changing definition file is not specified.

S:
Ignores the definition block and continues processing.

O:
Correct the error in the corresponding line in the severity changing definition file.

KAVB4606-W

The name of a definition in the severity changing definition file has been duplicated. (definition name = definition-name, line = line-number, file = file-name)

The definition block name of the severity changing definition file is duplicated.

S:
Ignores the definition block that is read later and continues processing.

O:
Correct the error in the corresponding line in the severity changing definition file.

KAVB4607-W

The invalid parameter parameter-name has been specified. (line = line-number, file = file-name)

A parameter that cannot be used is specified in the severity changing definition file. Also, a parameter is specified outside the definition block.

S:
Ignores the corresponding line and continues processing.

O:
Correct the error in the corresponding line in the severity changing definition file.

KAVB4608-W

The syntax of a severity level change definition is invalid. cause (definition name = definition-name, line = line-number, file name = file-name)

There is an invalid definition in the condition block in the severity changing definition file.

S:
Ignores the definition block and continues processing.

O:
Correct the error in the corresponding line in the severity changing definition file.

KAVB4609-W

The syntax of a parameter is invalid. cause (definition name = definition-name, line = line-number, file name = file-name)

The severity description after modifying the severity changing definition file is invalid.

S:
Ignores the definition block and continues processing.

O:
Correct the error in the corresponding line in the severity changing definition file.

KAVB4610-E

An error occurred while reading the severity changing definition file (file-name): reason

An error occurred during reading of the severity changing definition file.

S:
Ignores the definition file and continues processing.

O:
Check the definition file according to the reason code in the message, and then restart JP1/IM - Manager.
Collect data, and then contact a system administrator.

KAVB4611-E

An error occurred during severity change definition processing. (serial number in the event database = serial-number-in-event-database, arrival time = arrival-time, cause = reason)

An error occurred during severity changing definition processing.

S:
Ignores the definition file and continues processing.

O:
Take the corrective action given for the reason code in the message.
000: Collect data, and then contact a system administrator.
001: A memory shortage occurred. Check memory usage, and then restart JP1/IM - Manager.
002: A severity that is not the severity of the given JP1 event was specified. Carefully review the method of issuing JP1 events.
003: The total size of the extended attribute values exceeds 10,000 bytes. Carefully review the method of issuing JP1 events.

KAVB4612-W

There is no "end-def" statement in the severity change definition block. (definition name = definition-name, line = line-number, file name = file-name)

The severity changing definition block has not been closed.

S:
Ignores the definition block and continues processing.

O:
Correct the error in the corresponding line in the severity changing definition file.

KAVB4613-W

"end-def" statement in the severity change definition block is invalid. (definition name = definition-name, line = line-number, file name = file-name)

The definition of the end of the severity changing definition block is invalid.

S:
Ignores the definition block and continues processing.

O:
Correct the error in the corresponding line in the severity changing definition file.

KAVB4614-W

The name of a definition in the severity changing definition file is invalid. (line =line-number, file name =file-name)

The definition of the definition name is invalid.

S:
Ignores the definition block and continues processing.

O:
Correct the error in the corresponding line in the severity changing definition file.

KAVB4615-E

The size of the severity changing definition file exceeds the upper limit. (file name = file-name, upper limit =maximum-size)

The size of the severity changing definition file exceeds the maximum value.

S:
Does not read the severity changing definition file and continues processing.

O:
Carefully review the severity changing definition file to determine whether it contains extra comments or redundant definitions, and reduce the file size so that it is no greater than the maximum value. After correcting the file size, restart or reload JP1/IM - Manager.

KAVB4616-E

The severity change definition was not found.

The severity changing definition file cannot be found.

S:
Does not change the severity of all JP1 events if this error occurs during startup of JP1/IM - Manager.
If the error occurs during execution of the jco_spmd_reload command, continues processing using the severity changing definition that was in effect prior to execution of the jco_spmd_reload command.

O:
Check the following items, and then restart JP1/IM - Manager or execute the jco_spmd_reload command.
  • Determine whether a severity changing definition file exists. If a severity changing definition file does not exist, create one.
  • Determine whether there is read permission for the severity changing definition file. If there is no read permission, assign read permission for the file.

KAVB4700-I

The event base service was started. : logical-host-name

Event Base Service was started.

KAVB4701-I

The event base service was terminated. : logical-host-name

Event Base Service was stopped.

S:
Stops executing automated action processing and event distribution processing.

KAVB4702-E

The event base service was terminated abnormally. (Hostname : host-name)

Event Base Service of the host (host-name) was stopped abnormally due to an error that prevents the service from continuing.

O:
Check the integrated trace log to see if a KAVB1847-E, KAVB8605-E, KAVB8606-E, or KAVB8607-E message was output. If a message was output, take the corrective action given for that message.
If no message was output, collect JP1/Base and JP1/IM data on the host where Event Base Service stopped abnormally, and then contact a system administrator.

KAVB4703-E

Failed to read the event acquisition filter definition file. (File name : file-name)

An attempt to read the event acquisition filter definition file during startup of JP1/IM - Manager failed.

S:
Terminates processing.

O:
Check the following items:
  • Is there a displayed file?
    If not, use the definition file creation procedure described below to create a file.
  • Does the displayed file have administrator (in Windows) or root (in UNIX) read and write permissions?
    If permissions are not assigned, assign them.
If the problem is other than the above, the definition file may be corrupted. Use the definition file creation procedure to create a file.
To create a definition file:
  1. Execute the jco_spmd_status command to determine whether JP1/IM - Manager has stopped.
  2. If the event acquisition filter definition file is backed up, restore the file, and then restart JP1/IM - Manager.
  3. If the event acquisition filter definition file is not backed up, use the following procedure to restore the event acquisition filter (the filter that acquires events other than JP1/SES events) to initial status. Then start JP1/IM - Manager, and reconfigure the definition of the event acquisition filter.
    To restore the event acquisition filter to initial status:
  • In Windows:
    copy Console-path\conf\console\filter\receive_filter.conf.model Console-path\conf\console\filter\receive_filter.conf
  • In UNIX:
    cp -p /etc/opt/jp1cons/conf/console/filter/receive_filter.conf.model /etc/opt/jp1cons/conf/console/filter/receive_filter.conf

KAVB4704-E

The event acquisition filter could not be created. :maintenance-information

An attempt to create the event acquisition filter failed.

S:
Terminates processing.

O:
The definition file may be corrupted.
  1. If the event acquisition filter definition file is backed up, restore the file, and then restart JP1/IM - Manager.
  2. If the event acquisition filter definition file is not backed up, use the following procedure to restore the event acquisition filter (the filter that acquires events other than JP1/SES events) to initial status. Then start JP1/IM - Manager, and reconfigure the definition of the event acquisition filter.
    To restore the event acquisition filter to initial status:
  • In Windows:
    cd Console-path\conf\console\filter
    copy Console-path\conf\console\filter\receive_filter.conf.model Console-path\conf\console\filter\receive_filter.conf
  • In UNIX:
    cd /etc/opt/jp1cons/conf/console/filter
    cp -p /etc/opt/jp1cons/conf/console/filter/receive_filter.conf.model /etc/opt/jp1cons/conf/console/filter/receive_filter.conf

KAVB4705-E

An attempt to write data to the action definition backup file has failed. (detailed information = detailed-information)

An attempt to write data to the action definition backup file failed. The execution results displayed by the -d option of the jcastatus command may become invalid.

S:
Stops writing data to the action definition backup file and continues processing.

O:
Check the following items, and then re-execute the jcachange command.
  • Is sufficient disk space allocated?
  • Is sufficient system physical memory and virtual memory allocated?
  • Is access permission assigned for any of the folders (directories) in the paths below?

In Windows:
Physical host:
Console-path\log\action
Logical host:
shared-folder\jp1cons\log\action

In UNIX:
Physical host:
/var/opt/jp1cons/log/action
Logical host:
shared-directory/jp1cons/log/action
If the problem cannot be resolved, check the following OS log items to determine whether a shortage occurred with OS resources such as file descriptors.
  • In Windows: Windows event log
  • In UNIX: syslog
If a resource shortage did not occur, use the data collection tool to collect data, and then contact a system administrator.

KAVB4750-I

The automatic action process was connected.

Automatic Action Service was connected from Event Base Service.

KAVB4751-E

An attempt to connect to the automatic action process failed.

An attempt to connect to Automatic Action Service from Event Base Service failed. The specified number of retries were attempted, but a connection could not be established.

S:
Stops connecting to Automatic Action Service and continues processing.

O:
Execute the jco_spmd_status command to determine whether Automatic Action Service is running. If Automatic Action Service is running, it is possible that a connection could not be established within the retry time and the specified number of retries because startup processing of Automatic Action Service is taking too much time. Carefully review the retry setting. If a connection still cannot be established after changing the retry setting, or if Automatic Action Service is not running, collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4752-I

Central Scope was connected.

Central Scope Service was connected from Event Base Service.

KAVB4753-E

An attempt to connect to Central Scope failed.

An attempt to connect to Central Scope Service from Event Base Service failed. The specified number of retries were attempted, but a connection could not be established.

S:
Stops connecting to Central Scope Service and continues processing.

O:
Execute the jco_spmd_status command to determine whether Central Scope Service is running. If Central Scope Service is running, it is possible that a connection could not be established within the retry time and the specified number of retries because startup processing of Central Scope Service is taking too much time. Carefully review the retry setting.
If a connection still cannot be established after changing the retry setting, or if Central Scope Service is not running, collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4754-I

Event Console Server was connected.

Event Console Service was connected from Event Base Service.

KAVB4755-E

An attempt to connect to Event Console Server failed.

An attempt to connect to Event Console Service from Event Base Service failed. The specified number of retries were attempted, but a connection could not be established.

S:
Stops connecting to Event Console Service and continues processing.

O:
Execute the jco_spmd_status command to determine whether Event Console Service is running. If Event Console Service is running, it is possible that a connection could not be established within the number of retries and the retry time because startup processing of Central Scope Service is taking too much time. Carefully review the retry setting. If a connection still cannot be established after changing the retry setting, or if Event Console Service is not running, collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4756-I

The automatic action process was disconnected.

The connection between Event Base Service and Automatic Action Service was ended.

S:
Stops sending automated action requests to Automatic Action Service.

KAVB4757-I

Central Scope was disconnected.

The connection between Event Base Service and Central Scope Service was ended.

S:
Stops sending events to Central Scope Service.

KAVB4758-I

Event Console Server was disconnected.

The connection between Event Base Service and Event Console Service was ended.

S:
Stops sending events to the event console.

KAVB4759-E

An attempt to request transmission to the automatic action process failed.:(SEQNO: serial-number-in-event-database-of-trigger-event-of-automated-action-that-failed-to-be-sent, Command: command-of-automated-action-that-failed-to-be-sent)

An attempt to send an action request to the automated action process failed. The specified number of retries were attempted, but failed.

S:
Does not send the action of the displayed event and continues processing.

O:
Collect JP1/Base and JP1/IM data, and then contact a system administrator. If you must execute the command, execute the displayed command manually.

KAVB4760-E

Event transmission to Central Scope failed.:(SEQNO: serial-number-in-event-database-of-trigger-event-of-automated-action-that-failed-to-be-sent)

An attempt to send an event to Central Scope Service failed. The specified number of retries were attempted, but failed.

S:
Does not send the displayed event and continues processing.

O:
Collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4761-E

Event transmission to Event Console Server failed.:(SEQNO: serial-number-in-event-database-of-trigger-event-of-automated-action-that-failed-to-be-sent)

An attempt to send an event to Event Console Server failed. The specified number of retries were attempted, but failed.

S:
Does not send the displayed event and continues processing.

O:
Collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4762-W

The response to the request timed out.

The response from the process to which a request was sent timed out.

S:
Ends the connection with the timed-out process and continues processing.

KAVB4764-W

An error occurred in acquiring an event from the event service. Please check if the event service is running or not. If not, recover the error by starting the event service.

An error occurred during acquisition of an event from Event Service. Event Service was unable to distribute the event to Event Console Service and Automatic Action Service.

S:
Continues processing.

O:
Determine whether Event Service is running. If Event Service is not running, start Event Service. If Event Service is running, collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4765-I

Event Flow Control Service detected the refused connection from the automatic action process. An attempt to request transmission to the automatic action process was stopped.:(SEQNO: serial-number-in-event-database-of-trigger-event-of-automated-action-that-failed-to-be-sent, Command: command-of-automated-action-that-failed-to-be-sent)

Event Base Service detected a disconnection of communication with Automatic Action Service.

S:
Does not send the action request to Automatic Action Service until connection is re-established.

KAVB4766-I

Event Flow Control Service detected the refused connection from Central Scope Server. Event transmission to Central Scope Server was stopped.:(SEQNO: serial-number-in-event-database)

Event Base Service detected a disconnection of communication with Central Scope Service.

S:
Does not distribute the event to Central Scope Service until connection is re-established.

KAVB4767-I

Event Flow Control Service detected the refused connection from Event Console Server. Event transmission to Event Console Server was stopped.:(SEQNO: serial-number-in-event-database)

Event Base Service detected disconnection of communication with Event Console Service.

S:
Does not distribute the event to Event Console Service until connection is re-established.

KAVB4768-E

An attempt to initialize communication processing has failed. (reason: reason)

An attempt to initialize communication processing of Event Base Service failed.

S:
Stops Event Base Service.

O:
The network setting may be incorrect. Check the integrated trace log or command message log, and take the corrective action given for the message that was output preceding this message. If the network setting is correct, use the data collection tool to collect data, and then contact a system administrator.

KAVB4769-E

An attempt to initialize communication processing for the event base service has failed. (IP address = IP-address, port number = port-number, reason = reason)

An attempt to initialize communication processing of Event Base Service failed.

S:
If a multiple LAN configuration is used, ignores the IP address where the error occurred and continues processing.
In configurations other than multiple LANs, stops Event Base Service.

O:
Make sure that the port number of service name jp1imfcs defined in the services file is not being used for other services. If the port number is duplicated, change the port number to a unique number. Also check the OS settings and log to determine whether the network is available.
If the problem is other than the above, use the data collection tool to collect data, and then contact a system administrator.

KAVB4770-W

An attempt at event acquisition processing from the specified event acquisition start location has failed. Acquisition will begin from the events (events after serial number serial-number-in-event-database in the event database) that are registered after JP1/IM - Central Console is started.(maintenance-information)

During startup of JP1/IM - Manager, an error occurred when Event Base Service attempted to acquire an event from Event Service at the specified event acquisition start location.

If the event to be registered after startup of JP1/IM - Manager is an event for internal communication for JP1/Base and JP1/IM - Manager, the event displayed in the message may not be acquired. Also, the event displayed in the message may be filtered by the event acquisition filter or user filter.

S:
After JP1/IM - Manager has started, begins acquiring events registered in Event Service.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KAVB4771-I

The event database has been switched, so the events from serial numbers serial-number-in-event-database-1-to-serial-number-in-event-database-2 cannot be acquired.

Events stored in the previous event database could not be acquired because the event database has been switched.

S:
Begins acquiring events from the beginning of the event database.

KAVB4772-I

Acquisition will be started from the events registered after JP1/IM - Central Console is started, because no event exists in the event database.

The event specified at the event acquisition start location could not be acquired because no event exists in the event database.

S:
After JP1/IM - Manager has started, begins acquiring events registered in Event Service.

KAVB4773-E

Connection to the Event Server is not possible because the permission was not set.

The event server could not be connected because permission to connect to the event server was not assigned.

S:
Stops JP1/IM - Manager because the event cannot be acquired.

O:
Set either *or SYSTEM (in Windows) or root (in UNIX) for the users parameter in the event server settings file of JP1/Base, and then restart JP1/Base or JP1/IM - Manager.

KAVB4774-W

Acquisition will now be started from the events (events after serial number serial-number-in-event-database in the event database) registered after JP1/IM - Central Console is started, because the event acquisition start location (serial number in the event database: serial-number-in-event-database) of control-name is invalid.

The control displayed in the message detected that the event acquisition start location is invalid. For the control name, automated action service, event console service, central scope service, or event generation function is displayed.

S:
After JP1/IM - Manager has started, the control displayed in the message begins acquiring events registered in the event server.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KAVB4775-I

The event database has been switched, so the event acquisition start location (serial number in the event database: serial-number-in-event-database) of control-name was not found. Acquisition will now start from the start of the event registered in the event database (serial number in the event database: serial-number-in-event-database).

The event acquisition start location of the control displayed in the message could not be found because the event database has been switched. For the control name, automated action service, event console service, central scope service, or event generation function is displayed.

If the event registered at the beginning of the event database is an event for internal communication for JP1/Base and JP1/IM - Manager, the event displayed in the message may not be acquired. Also, the event displayed in the message may be filtered by the event acquisition filter or user filter.

S:
The control displayed in the message begins acquiring events from the beginning of the event database.

KAVB4776-W

The event acquired from the event service will be ignored because the event contains invalid information. (event database serial number: serial-number-in-event-database, reason code = reason-code)

An event acquired from Event Service will be ignored because it contains invalid information.

S:
Ignores the event that contains invalid information and continues processing.

O:
Check the following items:
  • If the reason code is 3:
    The event arrival time is invalid. Use the manager to check the system time to determine whether the time is set correctly.
  • If the reason code is 4:
    The event registration time is invalid. On the host where the event was registered, check the system time to determine whether the time is set correctly.
If the problem is other than the above, use the data collection tool to collect data, and then contact a system administrator.

KAVB4777-E

An attempt to switch the event acquisition filter failed because the event database contains an invalid event.

An attempt to switch the event acquisition filter failed because the event database contained an invalid event.

S:
Continues processing using the event acquisition filter that was in use prior to switching.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KAVB4780-E

The Integrated Monitoring database is not set up.

The integrated monitoring database is not set up.

S:
Stops Event Base Service.

O:
Execute the jcodbsetup command to set up the integrated monitoring database, and then restart JP1/IM - Manager. If you are not using the integrated monitoring database, specify the -db option of the jcoimdef command to disable the event storage function, and then restart JP1/IM - Manager.

KAVB4785-E

An error occurred in the communication with process-name. (reason = reason)

An error occurred in socket communication between Event Base Service and the displayed process.

S:
Ends the connection with the displayed process and stops processing.

O:
Collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4786-E

Communication processing timed out because the process (process-name) did not respond.

Event Base Service accepted a processing request from the displayed process and attempted to send the results to the process, but a communication processing time-out occurred because the process did not respond.

S:
Event Base Service ends the connection with the displayed process and stops processing.

O:
Determine whether the manager host is in high load status. If it is not in high load status, use the data collection tool to collect data, and then contact a system administrator.

KAVB4787-E

An error occurred that prevented communication of the event base service from continuing. (reason = reason)

Socket communication of Event Base Service could not continue due to an error.

S:
If a multiple LAN configuration is used, stops socket communication where the error occurred and continues processing.
In configurations other than multiple LANs, stops Event Base Service if there is no socket available for communication.

O:
Collect JP1/Base and JP1/IM data, and then contact a system administrator.

KAVB4788-W

The port number of the service-name service could not be acquired. The default port number port-number will be used now and the system will run. Confirm the setting.

An attempt to acquire the port number failed during startup of JP1/IM - Manager.

S:
Uses the default port number and continues processing.

O:
Carefully review the port number setting.

KAVB4789-W

A definition could not be reflected in Event Console Service because a communication error occurred. (details = cause)

The following definition could not be applied in Event Console Service due to a communication error.

  • Enabling and disabling of memo entry setting function

S:
Continues reload processing.

O:
Check the following items, and then re-execute reload processing.
  • Is Event Console Service running?
  • Is the manager in high load status?
If the same message is displayed after re-execution of reload processing, use the data collection tool to collect data, and then contact a system administrator.

KAVB4901-E

I/O error occurred. : maintenance-information

An I/O error occurred in file input or output.

S:
Aborts processing where the error occurred.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KAVB4902-E

Insufficient memory. : maintenance-information

A memory shortage occurred.

S:
Aborts processing where the error occurred.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KAVB4903-E

System error occurred. : maintenance-information

A system error occurred.

S:
Aborts processing where the error occurred.

O:
Take the corrective action given for the system error message. If necessary, collect data, and then contact a system administrator.

KAVB4904-E

System error occurred. : maintenance-information

A system error occurred.

S:
Aborts processing where the error occurred.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KAVB4905-E

Failed to put message(message-ID). : maintenance-information

An attempt to output a message failed.

S:
Continues processing.

O:
Take corrective action according to the maintenance information.

KAVB4906-E

System file (file-name) is corrupt. : maintenance-information

The file managed by the system is corrupted or was deleted.

S:
Aborts processing where the error occurred.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KAVB4907-E

No more space in file (file-name).

There is no available space to which data can be written in the file system or device.

S:
Aborts processing where the error occurred.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KAVB4908-E

Error that prevented processing occurred in Event Server. : maintenance-information event-function-return-code

Unable to connect to the event server, register an event, or acquire an event due to an error.

S:
Aborts processing where the error occurred.

O:
Check the status of the event server, and take corrective action.

KAVB4909-E

An attempt to set locale information has failed.

An attempt to set locale information failed because a locale that is not supported by the OS was set.

S:
  • If the error message is output during startup of the manager, the system assumes that the locale is C and continues processing, but operation is inconsistent.
  • If the error message is output while opening the Action Parameter Definitions window or clicking the Apply button in the Action Parameter Definitions window, the system terminates the operation.
  • If the error message is output during execution of the jcamakea command, the system aborts processing.

O:
  • If the error message is output during startup of the manager, make sure that the LANG value in the jp1co_env.conf file is a value that can be specified, and then restart the manager.
  • If the error message is output while opening the Action Parameter Definitions window or clicking the Apply button in the Action Parameter Definitions window, check the environment variable value, restart, and then try the operation again.
  • If the error message is output during execution of the jcamakea command, make sure that the LANG environment variable value of the execution environment is a value that can be specified.
  • If the locale environment variable (LC_ALL, LC_COLLATE, LC_CTYPE, LC_MONETARY, LC_NUMERIC, LC_TIME, LC_MESSAGES) was specified, execute the unset command for the locale environment variable, and then retry the operation.
If the system is unable to recover after corrective action is taken, execute the locale -a command to determine whether the locale (the value of the LANG environment variable) was specified in the OS. If the locale was not specified, specify it.

KAVB5000-W

The Action Parameter Definitions window cannot be displayed because an item(item-name) not displayable by the connected IM-View is set. (line: line-number, file: file-name)

The Action Parameter Definitions window could not be displayed because an action definition that cannot be processed by the version of the connected JP1/IM - View was specified.

S:
Suspends reading of the action definition.

O:
Open the Action Parameter Definitions window using a version of JP1/IM - View that can display the required item(s).
  • Status monitoring can be displayed by JP1/IM - View version 07-01 or later.
  • Suppression time monitoring can be displayed by JP1/IM - View version 07-01 or later.
  • Delay monitoring time can be displayed by JP1/IM - View version 07-01 or later.
  • Rule can be displayed by JP1/IM - View version 08-00 or later when the JP1/IM - Rule Operation linkage function is enabled.

KAVB5001-E

The Action Parameter Definitions window could not be displayed because the version of the current automatic action definition is incompatible with the connected JP1/IM - View.

The Action Parameter Definitions window could not be displayed because the version of the action definition defined in JP1/IM - Console on the connected host is incompatible.

S:
Suspends reading of the automated action definition.

O:
Open the Action Parameter Definitions window using a version of JP1/IM - View that can display the currently defined automated action definition.
If the version of the automated action definition is 3, you can use JP1/IM - View version 09-00 or later to display the window.

KAVB5002-E

The Action Parameter Definitions window could not be updated because the version of the current automatic action definition is incompatible with the connected JP1/IM - View.

The automated action definition could not be updated because the version of the action definition defined in Central Console (JP1/IM - Console) on the connected host is incompatible.

S:
Suspends updating of the automated action definition.

O:
Open the Action Parameter Definitions window using a version of JP1/IM - View that can display the currently defined automated action definition, and then update the definition.
If the version of the automated action definition is 3, you can use JP1/IM - View version 09-00 or later to display the window.

KAVB5050-W

No Action Definition Information is specified.

The header information or action definition information of the action definition to be input is not specified.

S:
Suspends creation of the action definition.

O:
Re-enter the definition in the Action Parameter Detailed Definitions window.

KAVB5051-W

An invalid Parameter Group Number or an invalid event AND condition is specified. (line: line-number)

An event AND condition is specified at the starting action definition, or a value between 0 and 9 or a character other than & is specified for the parameter group in the Action Parameter Detailed Definitions window.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5052-W

An invalid Event ID is specified. (line: line-number)

The event ID in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5053-W

Invalid Message Text is specified. (line: line-number)

The regular expression specified in the message in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5054-W

Invalid Event Basic Information is specified. (line: line-number)

The regular expression specified for the basic event information in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5055-W

Invalid Event Detail Information is specified. (line: line-number)

The regular expression specified for the detailed event information in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Specify the action definition information correctly, and then re-open the Action Parameter Detailed Definitions window.

KAVB5056-W

An invalid severity for Event Expansion Information is specified. (line: line-number)

The value specified for the severity of the extended event information in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5057-W

An invalid User Name is specified. (line: line-number)

The executing user name specified in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5058-W

An invalid Environment Definition File is specified. (line: line-number)

The environment variable file name specified in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5059-W

An invalid Execution Host or Group is specified. (line: line-number)

The target host name specified in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5060-W

The length of one parameter exceeds maximum-length bytes. (line: line-number)

The length of the action definition parameter exceeds maximum-length bytes.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5061-W

More than 100 Event Extended Attributes are specified. (line: line-number)

More than 100 extended event attributes are specified for one action definition.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5062-W

An invalid Event Extended Attribute is specified. (line: line-number)

A regular expression of an extended event attribute specified in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5063-W

No action is specified. (line: line-number)

The user name, environment variable file name, or execution host or group name is specified, but the action is not specified.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB5064-W

More than 10 event AND conditions are specified in Action Definitions. (line: line-number)

Event AND conditions are specified for more than 10 action definitions.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB5065-W

Invalid Event Extended Attribute Name. (line: line-number)

An extended event attribute name specified in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Specify the action definition information correctly, and then re-open the Action Parameter Detailed Definitions window.

KAVB5066-W

An invalid Suppression Time is specified. (line: line-number)

The suppression time value specified in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Specify the action definition information correctly, and then re-open the Action Parameter Detailed Definitions window.

KAVB5067-W

An invalid Delay Monitoring Time is specified. (line: line-number)

The delay monitoring time value specified in the Action Parameter Detailed Definitions window is incorrect.

S:
Suspends creation of the action definition.

O:
Specify the action definition information correctly, and then re-open the Action Parameter Detailed Definitions window.

KAVB5068-W

The length of Action parameter exceeds maximum-length bytes. (line: line-number)

The length of the action parameter specified in the Action Parameter Detailed Definitions window exceeds maximum-length bytes.

S:
Suspends creation of the action definition.

O:
Specify the action definition information correctly, and then re-open the Action Parameter Detailed Definitions window.

KAVB5069-W

The length of the event monitoring condition parameter exceeds maximum-length bytes. (line: line-number)

The length of the parameter that can be specified for an event monitoring condition in the Action Parameter Detailed Definitions window exceeds maximum-length bytes.

S:
Suspends creation of the action definition.

O:
Re-enter the action definition information correctly in the Action Parameter Detailed Definitions window.

KAVB5070-E

An attempt to write data to the action definition file (file-name) has failed. (detailed information = detailed-information)

An attempt to write data to the automated action definition failed.

S:
Stops writing data to the automated action definition file and restores the previous status of the file. Continues processing without updating the settings in the manager.

O:
Reconfigure the automated action in the Action Parameter Definitions window.
Also check the following items:
  • Is sufficient disk space allocated?
  • Is sufficient system physical memory and virtual memory allocated?
  • Does a file with the same name, not a folder (directory), exist in the paths below?
  • Is access permission assigned for any of the folders (directories) in the paths below?

In Windows:
Physical host:
Console-path\conf\action
Console-path\conf\tmp
Logical host:
shared-folder\jp1cons\conf\action
shared-folder\jp1cons\conf\tmp

In UNIX:
Physical host:
/etc/opt/jp1cons/conf/action
/etc/opt/jp1cons/conf/tmp
Logical host:
shared-directory/jp1cons/conf/action
shared-directory/jp1cons/conf/tmp
If the problem cannot be resolved, check the following OS log items to determine if a shortage occurred with OS resources such as file descriptors.
  • In Windows: Windows event log
  • In UNIX: syslog
If a resource shortage did not occur, use the data collection tool to collect data, and then contact a system administrator.

KAVB5104-W

The Action Definition file includes an invalid parameter.

There is an inappropriate description in the automated action definition file.

S:
Aborts processing.

O:
Check the definition details of the automated action definition file, and then retry the operation.

KAVB5105-W

Failed to change the Action Definition file.

An attempt to modify the automated action definition file failed.

S:
Aborts processing.

O:
Make sure that the automated action definition file exists, and then retry the operation.

KAVB5106-E

Current Directory is too long.

The current directory is too long.

S:
Aborts processing.

O:
Shorten the current directory + file name to no more than 255 bytes, and then retry the operation.

KAVB5107-W

Cannot connect to Automatic Action process.

The automated daemon (service) could not be connected.

S:
Aborts processing.

O:
Make sure that the process is running and that it is not in busy status, and then retry the operation.

KAVB5108-W

Cannot receive response from Automatic Action process.

There is no response from the automated action daemon (service).

S:
Aborts processing.

O:
Make sure that the process is operating correctly, and then retry the operation.

KAVB5109-W

Cannot connect to Event Flow Control Service.

The event flow control service cannot be connected.

S:
Aborts processing.

O:
Make sure that the process is running and that it is not in busy status, and then retry the operation.

KAVB5110-W

Cannot receive response from the event base service.

This is no response from Event Base Service.

S:
Aborts processing.

O:
Make sure that the process is operating correctly, and then retry the operation

KAVB5111-W

The value for an option specified together with the -i option was invalid.

The value of the option specified together with the -i option could not be applied.

S:
Continues processing without applying the value of the option specified together with the -i option.

O:
If a KAVB4901-E or KAVB4789-W message is displayed in the integrated trace log, take the corrective action given for that error message.
If a message is not output, use the data collection tool to collect data, and then contact a system administrator.

KAVB5150-W

There is no applicable data in the Command Executed log file.

An attempt to acquire the command execution log failed because there is no applicable data.

S:
Ignores the inapplicable data and continues processing.

O:
If the error message is output when an action in wait status is canceled, no corrective action is needed because deletion processing by the automated action daemon (service) was completed before queuing the action execution request in JP1/Base at the command execution destination. If the error message is output in a circumstance other than the above, take appropriate corrective action such as increasing the size of the command execution log.

KAVB5151-W

Failed to get data from Command Executed log file. : maintenance-information

An attempt to acquire the command execution log of the automated action failed due to an error in operation of the command execution log file.

S:
Ignores the requested data and continues processing.

O:
Check the following items according to the reason code displayed in maintenance-information. maintenance-information is displayed as error-location-number-1 error-location-number-2 reason-code.
  • If the reason code is 1:
    The command execution file of the automated action is locked. Wait awhile, and then retry the operation.
  • If the reason code is 2:
    The number of opened files exceeds the maximum number allowed by the system. Allocate appropriate OS resources, and then retry the operation.
  • If the reason code is 4:
    The command execution log file of the automated action may be corrupted. For details about how to check the log file for damage and how to recover the command execution log file of the automated action, see Section 9.5(4) Actions to take when a command execution log file is damaged in the manual Job Management Partner 1/Integrated Management - Manager Administration Guide.
    If the command execution log file of the automated action is normal, execute the JP1/IM data collection tool, and then contact a system administrator.
  • If the reason code is 5:
    A memory shortage occurred. Allocate appropriate OS resources, and then retry the operation.

KAVB5152-W

An invalid response was received when the command was executed. (source host name = host-name, action serial number = action-serial-number, cid = cid, reason code = reason-code)

The time information in the response received from command control is invalid. The start time or end time of the automated action results may not be displayed.

S:
Ignores the invalid location and continues processing.

O:
Check the system time on the host where the action was executed to determine whether the time is set correctly.
If there is no error in the time, use the data collection tool to collect data, and then contact a system administrator.

KAVB5200-W

No Action Definition File is specified.

The automated action definition file name is not specified for the argument of the command.

S:
Aborts processing.

O:
Specify the automated action definition file, and then retry the operation.

KAVB5201-W

More than 100 Action Definition Files are specified.

More than 100 automated action definition files are specified for the argument of the command.

S:
Ignores file names specified after the 100th file name and continues processing.

O:
Use a text editor to reduce the number of files by consolidating automated action definition files, and then retry the operation. Alternatively, specify an automated action definition file that is created by merging up to 100 files and the 101st and subsequent automated action definition files, and then retry the operation.

KAVB5202-W

The specified Action Definition file (file-name) has no parameters.

There are no parameters to be checked in the specified automated action definition file. The file contains only blank spaces, linefeeds, and command lines.

S:
Suspends processing of the automated action definition file. If multiple files are specified, processes the next file.

O:
Correct the error, and then retry the operation.

KAVB5203-W

An invalid Action Definition exists. (line: line-number to line-number, file: file-name)

All action definitions specified for event AND conditions are invalid because there is an inappropriate action definition.

S:
Ignores the action definition at the relevant line and continues processing.

O:
Correct the error, and then retry the operation.

KAVB5250-W

Invalid Label name(label-name).

An inappropriate label name is specified.

S:
Aborts processing.

O:
Correct the error, and then retry the operation.

KAVB5251-W

Invalid value to Label name(label-name) is specified.

An inappropriate value is specified for the label name.

S:
Aborts processing.

O:
Correct the error, and then retry the operation.

KAVB5252-W

No value to Label name (label-name) is specified.

No value is specified for the label name.

S:
Aborts processing.

O:
Correct the error, and then retry the operation.

KAVB5253-W

No Label name is specified.

No label name is specified.

S:
Aborts processing.

O:
Correct the error, and then retry the operation.

KAVB5254-W

Failed to set value of Label name(label-name). : maintenance-information

An attempt to specify the value for the label name failed.

S:
Aborts processing.

O:
Determine whether the command definition settings were deleted.

KAVB5300-I

A request to re-execute an action was accepted.

A request to re-execute an action was accepted.

S:
Continues processing.

KAVB5301-W

There is no applicable data in the Action Information file.

An attempt to acquire action information from the action information file failed because there is no data.

S:
Aborts processing.

O:
Make sure that the capacity of the action information file is sufficient. If it is not, re-estimate the required capacity of the action information file, and specify an appropriate capacity. If the capacity of the action information file is sufficient, processing may have stopped (hung up) due to a deadlock or an infinite loop in Automatic Action Service (jcamain). If Automatic Action Service has stopped, collect data, and then restart JP1/IM - Manager.
Use the following method to determine whether Automatic Action Service has stopped.
  • To determine whether Automatic Action Service has stopped:
    Execute the jco_spmd_status command to see if Automatic Action Service is running. If Automatic Action Service is running, check the following items:
  • If the health check function is enabled:
    Refer to the event arrival time of the event displayed in the KAVB5301-W message, and see if a KAVB8060-E message was output in the integrated trace log file around the same time.
  • If the health check function is disabled:
    Determine whether action details are displayed correctly for events received prior to the event displayed in the KAVB5301-W message.

KAVB5302-W

A request to re-execute an action could not be accepted.

A request to re-execute an action failed because an action that was executed using JP1/IM - Console version 06-51 or earlier cannot be re-executed.

S:
Aborts processing.

O:
Check the contents of the action. If you wish to re-execute the action, execute it in the Execute Command window.

KAVB5303-W

The action's status does not allow re-execution.
Please click the "Update" button and check the status.

After re-execution of an action was requested, re-execution was requested again before clicking the Update button. It is also possible that the action could not be re-executed because there is no data for that action in the action information file.

S:
Aborts processing.

O:
Wait awhile, and then click the Update button in the List of Action Results window to check the latest status of the action.
If the same message is displayed, data for the action does not exist in the action information file. Increase the size of the action information file as needed.

KAVB5304-W

A request to re-execute an action failed.

An attempt to request re-execution of an action failed.

S:
Aborts processing.

O:
On the connected host of JP1/IM - View, make sure that JP1/Base is operating correctly.

KAVB5350-I

No displayable action definition exists because an automatic action process is in the automated-action-status (stop or pause) state.

No action definitions can be displayed because the automated action process is in stop or pause status.

S:
Aborts processing.

KAVB5400-E

Changing of the event distribution option was not possible.(Target file name: destination-file-name, Original file name: source-file-name): error-details

The event distribution option setting could not be changed because copying of the file failed.

S:
Does not change the event distribution option setting.

O:
Check the status of the destination and source files according to the displayed error information. If a file does not exist, contact a system administrator.

KAVB5401-E

Changing of the event distribution option was not possible. (file: file-name)

The event distribution option setting could not be changed.

S:
Does not change the event distribution option setting.

O:
Determine whether you can read from and write to the extended startup process definition file.

KAVB5403-E

An attempt to specify startup settings for the correlation event generation service has failed. (option = -egs-option-specification-value, reason = reason, file name = file-name)

An attempt to specify starting or not starting the event generation function upon starting JP1/IM - Manager failed.

S:
Restores the previous status.

O:
  • If reason is [I/O Error]: Determine whether you can read from and write to the file indicated by the file name.
  • If reason is [System Error]: Collect data, and then contact a system administrator.

KAVB5450-I

A request to cancel an action was received.

A request to cancel an action was accepted.

S:
Continues processing.

KAVB5451-I

Action cancellation processing has finished.

Action cancellation processing has finished.

S:
Terminates processing.

KAVB5452-I

Action cancellation processing has been canceled.

Action cancellation processing was suspended.

S:
Terminates processing.

KAVB5453-I

Cancellation processing was not performed because the action did not exist in the Execution Host.(Action Serial Number=action-serial-number, Execution Host=action-execution-host-name)

Cancellation processing was not executed because no action exists in the execution host.

S:
Terminates processing.

O:
Take corrective action according to the status of the canceled action.
  • If the status of the canceled action is Ended, cancellation processing cannot be performed because execution of the action is already completed.
  • If the status of the canceled action is other than End, make sure that the action execution host is running.

KAVB5454-E

Action cancellation processing has failed.

An attempt to perform cancellation processing of the action failed.

S:
Terminates processing.

O:
Check the following items, and then retry the operation.
  • Is the action execution host running?
  • Is JP1/IM - Manager that requested the action running?
  • Has a network error occurred?

KAVB5455-W

The Action Serial Number(action-serial-number) is specified more than once.

The action serial number is duplicated.

S:
Terminates processing.

O:
Eliminate duplication of the action serial number, and then retry the operation.

KAVB5456-W

A maximum of 20 Action Serial Numbers can be specified.

More than 20 action serial numbers are specified for the argument.

S:
Terminates processing.

O:
Reduce the specified action serial numbers to no more than 20, and then retry the operation.

KAVB5457-W

The action for the specified Action Serial Number(action-serial-number) does not exist.

The action serial number specified for the argument does not exist.

S:
Terminates processing.

O:
Specify the correct action serial number, and then retry the operation.

KAVB5458-W

An invalid Execution Host Name(action-execution-host-name) is specified.

The action execution host name specified for the argument is invalid.

S:
Terminates processing.

O:
Specify the correct action execution host name, and then retry the operation.

KAVB5459-W

Cancellation is not possible because the action with the specified Action Serial Number(action-serial-number) is not in a cancelable state.

Cancellation processing was not executed because it is not possible to cancel the action of the action serial number specified for the argument.

S:
Terminates processing.

O:
Specify an action that can be canceled, and then retry the operation.

KAVB5460-E

A request to cancel an action could not be processed by the Execution Host.
(Execution Host=action-execution-host-name, Action Serial Number=action-serial-number)

The action execution host could not process a request to cancel an action.

S:
Terminates processing.

O:
Check the following items:
  • Is the version of JP1/Base on the action execution host 07-00 or later?
  • Is the action execution host running?

KAVB5461-I

Any action will be cancelled. Is this OK? [Y or N]

Confirms that it is OK to cancel the specified action.

S:
Waits for input.

O:
Enter Y or y to cancel the action. Enter N or n not to cancel the action.

KAVB5500-E

The specified action definition file cannot be converted because its format is invalid.

The conversion cannot be performed because the format of the specified action definition file is incorrect.

S:
Terminates processing.

O:
Execute the jcamakea command to see if there is an error in the action definition file, correct the error, and then re-execute the jcadefcnv command.

KAVB5501-W

The action definition file cannot be converted because the specified value of DESC_VERSION is 3 or more.

An action definition file of DESC_VERSION 3 or later is specified for the action definition file to be converted.

S:
Terminates processing.

O:
Check the name of the action definition file to be converted, correct the error, and then re-execute the jcadefcnv command.

KAVB5502-E

The pre-conversion name of the action definition file matches its post-conversion name.

The pre-conversion action definition file name and post-conversion action definition file name are the same.

S:
Terminates processing.

O:
Change the name of the post-conversion action definition file.

KAVB5503-W

After conversion, the action definition file contains an item that is invalid in version 09-00 or later.

A definition item is invalid because the version of the output action definition file is 09-00 or later.

S:
Terminates processing.

O:
Correct the invalid item in the action definition file that was output as a version 09-00 format file. Then execute the jcamakea command to see if the definition file contains invalid items.

KAVB5504-E

The name of the post-conversion action definition file cannot be used because a file with that name already exists.

The action definition file cannot be converted because a file with the same name as the post-conversion action definition file already exists.

S:
Terminates processing.

O:
Change the name of the post-conversion action definition file, and then retry the operation.

KAVB5511-W

More than 10 AND conditions have been specified. (line = line-number, file = file-name)

More than 10 AND conditions are specified.

S:
Ignores the action block that contains the error and continues processing.

O:
Correct the error in the automated action definition file, and then retry the operation.

KAVB5512-W

An ampersand (&) cannot be specified for a parameter group of an action block at the front of an AND condition. (line = line-number, file = file-name)

You cannot specify an ampersand (&) for the parameter group of the action block at the beginning of an AND condition.

S:
Ignores the action block that contains the error and continues processing.

O:
Correct the error in the automated action definition file, and then retry the operation.

KAVB5513-W

More than 256 event conditions have been specified. (action = action-name, line = line-number, file = file-name)

More than 256 event conditions are specified.

S:
Ignores the action block that contains the invalid definition and continues processing.

O:
Correct the error in the automated action definition file, and then retry the operation.

KAVB5514-W

The parameter parameter-name cannot be specified because a rule has been specified for the action. (action = action-name, line = line-number, file = file-name)

If an action for starting a rule was specified, no user name, target host name/group name, or environment variable file name can be specified.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5515-W

The location of the version of the automatic action definition file is invalid. (line = line-number, file = file-name)

The version of the automated action definition file is defined at a location other than the start of the file.

S:
Ignores the version of the automated action definition file with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5516-W

The version information for the automatic action definition file is invalid. (line = line-number, file = file-name)

The version information is invalid.

S:
Assumes that the automated action definition file version number is 3 and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5517-W

The parameter parameter is missing. (action = action-name, line = line-number, file = file-name)

A parameter is not specified.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5518-W

The shared block has been duplicated. (line = line-number, file = file-name)

A shared block is duplicated.

S:
Ignores shared blocks with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5519-W

An invalid parameter is specified. (invalid parameter = parameter-name, line = line-number, file = file-name)

An invalid parameter is specified in the automated action definition file.

S:
Ignores the invalid parameter and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5520-W

An invalid parameter is specified in an action block. (action = action-name, invalid parameter = parameter-name, line = line-number, file = file-name)

An invalid parameter is specified in an action block.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5521-W

An action block does not end with an "end-act" statement. (action = action-name, line = line-number, file = file-name)

An action block has no end.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5522-W

An action name is not specified. (line = line-number, file = file-name)

No action name is specified.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5523-W

If an ampersand (&) is specified in a parameter group, an action name cannot be specified. (action = action-name, line = line-number, file = file-name)

If an ampersand (&) is specified in a parameter group, an action name cannot be specified.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5524-W

An action name is duplicated. (action = action-name, line = line-number, file = file-name)

An action name is duplicated.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5525-W

An action name exceeds the maximum length. (line = line-number, file = file-name)

An action name exceeds the maximum length.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5526-W

The parameter parameter-name is invalid. (action = action-name, line = line-number, file = file-name)

The specification for the indicated parameter is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5527-W

No value is specified for the parameter parameter-name. (action = action-name, line = line-number, file = file-name)

No value is specified after the indicated parameter.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5528-W

The parameter parameter-name is specified more than once. (action = action-name, line = line-number, file = file-name)

The indicated parameter is specified more than once.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5529-W

No value is specified for the parameter parameter-name. (action = action-name, line = line-number, file = file-name)

No value is specified after the parameter shown.

S:
Ignores the parameter with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5530-W

The parameter parameter-name is specified more than once. (action = action-name, line = line-number, file = file-name)

The indicated parameter is specified more than once.

S:
Ignores parameters with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5531-W

The number of characters (bytes) in the parameter parameter-name exceeds the maximum. (action = action-name, line = line-number, file = file-name)

The value of the indicated parameter exceeds the maximum number of bytes.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5532-W

The number of characters (bytes) in the parameter parameter-name exceeds the maximum. (action = action-name, line = line-number, file = file-name)

The value of the indicated parameter exceeds the maximum number of bytes.

S:
Specifies a valid character string of no more than the maximum byte count and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5533-W

An event condition block does not end with an "end-act" statement. (action = action-name, line = line-number, file = file-name)

An event condition block has no end.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5534-W

The event condition block is invalid. (action = action-name, line = line-number, file = file-name)

The description of an event condition is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5535-W

The event condition block attribute name is invalid. (attribute name = attribute-name, action = action-name, line = line-number, file = file-name)

The event condition attribute-name is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5536-W

The attribute name is not specifiable. (attribute name = attribute-name, action = action-name, line = line-number, file = file-name)

An attribute name that cannot be specified was specified.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5537-W

The comparison key word for the event conditions is invalid. (attribute name = attribute-name, comparison key word = comparison-keyword, action = action-name, line = line-number, file = file-name)

The event condition comparison-keyword is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5538-W

The comparison key word is not specifiable. (attribute name = attribute-name, comparison key word = comparison-keyword, action = action-name, line = line-number, file = file-name)

A comparison keyword that cannot be specified was specified.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5539-W

The number of event condition operands exceeds the maximum number. (attribute name = attribute-name, action = action-name, line = line-number, file = file-name)

The number of event condition operands exceeds the maximum.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5540-W

An event condition operand is duplicated. (attribute name = attribute-name, operand = operand, action = action-name, line = line-number, file = file-name)

An event condition operand is duplicated.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5541-W

An event ID operand is invalid. (operand = operand, action = action-name, line = line-number, file = file-name)

An event ID operand is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5542-W

A regular expression is invalid. (attribute name = attribute-name, operand = operand, action = action-name, line = line-number, file = file-name)

The specification of a regular expression is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5543-W

A critical operand is invalid. (operand = operand, action = action-name, line = line-number, file = file-name)

A critical operand is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5544-W

An operand is invalid. (attribute name = attribute-name, operand = operand, action = action-name, line = line-number, file = file-name)

An operand is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5545-W

The combination of comparison conditions among multiple event attributes that have the same name is invalid. (attribute = attribute-name, action = action-name, line = line-number, file = file-name)

The combination of comparison conditions among multiple specified event attributes that have the same name is invalid.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the invalid item in the action definition file output in version 09-00 format. After correcting it, use the jcamakea command to confirm that there are no invalid items in the definition file.

KAVB5546-W

The number of characters (bytes) in an operand exceeds the maximum. (attribute name = attribute-name, action = action-name, line = line-number, file = file-name)

An operand exceeds the maximum number of bytes.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5547-W

The total number of characters (bytes) in the operands exceeds the maximum. (action = action-name, line = line-number, file = file-name)

The total number of bytes in the operands exceeds the maximum.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5548-W

The specified value for the parameter parameter-name is outside the valid range. (specified value= specified-value, action = action-name, line = line-number, file = file-name)

The value specified for the indicated parameter is outside the valid range.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5549-W

If an ampersand (&) is specified in a parameter group, det cannot be specified. (action = action-name, line = line-number, file = file-name)

If an ampersand (&) is specified in a parameter group, det cannot be specified.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5550-W

Version information of an action definition file is specified more than once. (line = line-number, file = file-name)

The version information of an action definition file is specified more than once.

S:
Ignores version information with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5551-W

A shared block is specified after an action block. (line = line-number, file = file-name)

A shared block is specified after an action block.

S:
Ignores the shared block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5552-W

A shared block does not end with an "end-act" statement. (line = line-number, file = file-name)

A shared block has no end.

S:
Ignores the shared block with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5553-W

An invalid parameter is specified for a shared block. (invalid parameter = parameter-name, line = line-number, file = file-name)

An invalid parameter is specified for a shared block.

S:
Ignores the parameter with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5554-W

The parameter parameter-name is specified more than once. (line = line-number, file = file-name)

The indicated parameter is specified more than once.

S:
Ignores the parameter with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5555-W

No value is specified for the parameter parameter-name. (line = line-number, file = file-name)

No value is specified after the parameter shown.

S:
Ignores the parameter with the definition error and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5556-W

The parameter parameter-name is invalid. (line = line-number, file = file-name)

The description of the indicated parameter is invalid.

S:
Ignores parameters with definition errors and continues processing.

O:
Correct the automated action definition file error, and then retry the operation.

KAVB5557-W

An error occurred while reading an action definition file. (reason = reason, line = line-number, file = file-name)

An error occurred while reading a definition file.

S:
Ignores the affected action block or parameter and continues processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KAVB5558-E

The size of the action definition file exceeds the upper limit. (file name = file-name, upper limit = maximum-size)

The size of the action definition file exceeds the upper limit.

S:
Terminates processing without reading the action definition file.

O:
Carefully review the contents of the action definition file to see if it contains extraneous comments or redundant definitions, and correct the file so that its size does not exceed the upper limit. After correcting the file, use the jcamakea command to confirm that there are no errors in the definition file.

KAVB5711-W

More than 10 AND conditions have been specified. (line = line-number, file = file-name)

More than 10 AND conditions have been specified.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5712-W

An ampersand (&) cannot be specified for a parameter group of an action block at the front of an AND condition. (line = line-number, file = file-name)

An ampersand (&) cannot be specified for a parameter group of an action block at the beginning of an AND condition.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5713-W

More than 256 event conditions have been specified. (action = action-name, line = line-number, file = file-name)

More than 256 event conditions have been specified.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5714-W

The parameter parameter-name cannot be specified because a rule has been specified for the action. (action = action-name, line = line-number, file = file-name)

If an action for starting a rule is specified, no user name, target host name/group name, or environment variable file name can be specified.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5715-W

The location of the version of the automatic action definition file is invalid. (line = line-number, file = file-name)

The version of the automated action definition file is defined at a location other than the start of the file.

S:
Ignores the version of the automated action definition file with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5716-W

The version information for the automatic action definition file is invalid. (line = line-number, file = file-name)

The version information is invalid.

S:
Assumes that the automated action definition file version number is 3 and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5717-W

The parameter parameter is missing. (action = action-name, line = line-number, file = file-name)

A parameter is not specified.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5718-W

The shared block has been duplicated. (line = line-number, file = file-name)

A shared block is duplicated.

S:
Ignores the shared block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5719-W

An invalid parameter is specified. (invalid parameter = parameter-name, line = line-number, file = file-name)

An invalid parameter is specified in an automated action definition file.

S:
Ignores the invalid parameter and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5720-W

An invalid parameter is specified in an action block. (action = action-name, invalid parameter = parameter-name, line = line-number, file = file-name)

An invalid parameter is specified in an action block.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5721-W

An action block does not end with an "end-act" statement. (action = action-name, line = line-number, file = file-name)

An action block has no end.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5722-W

An action name is not specified. (line = line-number, file = file-name)

No action name is specified.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5723-W

If an ampersand (&) is specified in a parameter group, an action name cannot be specified. (action = action-name, line = line-number, file = file-name)

If an ampersand (&) is specified in a parameter group, an action name cannot be specified.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5724-W

An action name is duplicated. (action = action-name, line = line-number, file = file-name)

An action name is duplicated.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5725-W

An action name exceeds the maximum length. (line = line-number, file = file-name)

An action name exceeds the maximum length.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5726-W

The parameter parameter-name is invalid. (action = action-name, line = line-number, file = file-name)

The specification for the indicated parameter is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5727-W

No value is specified for the parameter parameter-name. (action = action-name, line = line-number, file = file-name)

No value is specified after the parameter shown.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5728-W

The parameter parameter-name is specified more than once. (action = action-name, line = line-number, file = file-name)

The indicated parameter is specified more than once.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5729-W

No value is specified for the parameter parameter-name. (action = action-name, line = line-number, file = file-name)

No value is specified after the parameter shown.

S:
Ignores the parameter with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5730-W

The parameter parameter-name is specified more than once. (action = action-name, line = line-number, file = file-name)

The indicated parameter is specified more than once.

S:
Ignores parameters with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5731-W

The number of characters (bytes) in the parameter parameter-name exceeds the maximum. (action = action-name, line = line-number, file = file-name)

The value of the indicated parameter exceeds the maximum number of bytes.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5732-W

The number of characters (bytes) in the parameter parameter-name exceeds the maximum. (action = action-name, line = line-number, file = file-name)

The value of the indicated parameter exceeds the maximum number of bytes.

S:
Treats a character string whose length is no greater than the maximum number of bytes as valid, and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5733-W

An event condition block does not end with an "end-act" statement. (action = action-name, line = line-number, file = file-name)

An event condition block does not have an end.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5734-W

The event condition block is invalid. (action = action-name, line = line-number, file = file-name)

The description of an event condition is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5735-W

The event condition block attribute name is invalid. (attribute name = attribute-name, action = action-name, line = line-number, file = file-name)

The event condition attribute-name is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5736-W

The attribute name is not specifiable. (attribute name = attribute-name, action = action-name, line = line-number, file = file-name)

An attribute name that cannot be specified is specified.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5737-W

The comparison key word for the event conditions is invalid. (attribute name = attribute-name, comparison key word = comparison-keyword, action = action-name, line = line-number, file = file-name)

The event condition comparison-keyword is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5738-W

The comparison key word is not specifiable. (attribute name = attribute-name, comparison key word = comparison-keyword, action = action-name, line = line-number, file = file-name)

A comparison keyword that cannot be specified is specified.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5739-W

The number of event condition operands exceeds the maximum number. (attribute name = attribute-name, action = action-name, line = line-number, file = file-name)

The number of event condition operands exceeds the maximum number.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5740-W

An event condition operand is duplicated. (attribute name = attribute-name, operand = operand, action = action-name, line = line-number, file = file-name)

An event condition operand is duplicated.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5741-W

An event ID operand is invalid. (operand = operand, action = action-name, line = line-number, file = file-name)

An event ID operand is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5742-W

A regular expression is invalid. (attribute name = attribute-name, operand = operand, action = action-name, line = line-number, file = file-name)

The specification of a regular expression is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5743-W

A critical operand is invalid. (operand = operand, action = action-name, line = line-number, file = file-name)

A critical operand is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5744-W

An operand is invalid. (attribute name = attribute-name, operand = operand, action = action-name, line = line-number, file = file-name)

An operand is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5745-W

The combination of comparison conditions among multiple event attributes that have the same name is invalid. (attribute = attribute-name, action = action-name, line = line-number, file = file-name)

The combination of comparison conditions among multiple specified event attributes that have the same name is invalid.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5746-W

The number of characters (bytes) in an operand exceeds the maximum. (attribute name = attribute-name, action = action-name, line = line-number, file = file-name)

The number of bytes in an operand exceeds the maximum.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5747-W

The total number of characters (bytes) in the operands exceeds the maximum. (action = action-name, line = line-number, file = file-name)

The total number of bytes in the operands exceeds the maximum.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5748-W

The specified value for the parameter parameter-name is outside the valid range. (specified value= specified-value, action = action-name, line = line-number, file = file-name)

The specified value for the indicated parameter is outside the valid range.

S:
Ignores the action block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5749-W

If an ampersand (&) is specified in a parameter group, det cannot be specified. (action = action-name, line = line-number, file = file-name)

If an ampersand (&) is specified in a parameter group, det cannot be specified.

S:
Ignores action blocks with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5750-W

Version information of an action definition file is specified more than once. (line = line-number, file = file-name)

The version information of an action definition file is specified more than once.

S:
Ignores version information with a definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5751-W

A shared block is specified after an action block. (line = line-number, file = file-name)

A shared block is specified after an action block.

S:
Ignores the shared block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5752-W

A shared block does not end with an "end-act" statement. (line = line-number, file = file-name)

A shared block has no end.

S:
Ignores the shared block with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5753-W

An invalid parameter is specified for a shared block. (invalid parameter = parameter-name, line = line-number, file = file-name)

An invalid parameter is specified for a shared block.

S:
Ignores the parameter with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5754-W

The parameter parameter-name is specified more than once. (line = line-number, file = file-name)

The indicated parameter is specified more than once.

S:
Ignores parameters with definition errors and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5755-W

No value is specified for the parameter parameter-name. (line = line-number, file = file-name)

No value is specified after the parameter shown.

S:
Ignores the parameter with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5756-W

The parameter parameter-name is invalid. (line = line-number, file = file-name)

The description of the indicated parameter is invalid.

S:
Ignores the parameter with the definition error and continues processing.

O:
Correct the error, and then read the automated action definition file again.

KAVB5757-W

An error occurred while reading an action definition file. (reason = reason, line = line-number, file = file-name)

An error occurred while reading a definition file.

S:
Ignores the affected action block or parameter and continues processing.

O:
Use the data collection tool to collect data, and then contact a system administrator.

KAVB5758-E

The size of the action definition file exceeds the upper limit. (file name = file-name, upper limit = maximum-size)

The size of the action definition file exceeds the upper limit.

S:
Continues processing without reading the action definition file.

O:
Carefully review the contents of the action definition file to see if it contains extraneous comments or redundant definitions, and correct the file so that its size does not exceed the upper limit. After correcting the file, restart JP1/IM - Manager or update the action definitions.

[Contents][Back][Next]

[Trademarks]

All Rights Reserved. Copyright (C) 2009, Hitachi, Ltd.