Job Management Partner 1/Integrated Management - Manager Messages

1.3.4 Detailed information about communications errors

Some messages may output detailed information in the message text. Of these messages, the following table lists the detailed information number displayed in communications error messages such as KAVB1200-E, as well as the cause and the corrective action to take when the message is displayed.

Table 1-17 Detailed information about communications error messages

Detailed information Cause Corrective action

B00 The manager host on which JP1/IM - Manager operates cannot be reached from JP1/IM - View. Check the network configuration.

B01 JP1/IM - Manager is not running. Check whether JP1/IM - Manager has started.

B04 The host name cannot be resolved. Check the network configuration.

B06 The host name cannot be resolved. Check the network configuration.

B32 A timeout occurred between JP1/IM - View and JP1/IM - Manager. Increase the value set to SO_TIMEOUT.

H00 The host name cannot be resolved. Check the network configuration.

H01 A connection cannot be established through the specified port. Check the port settings.

H02 A connection cannot be established to JP1/IM - Manager. Check whether the host on which JP1/IM - Manager operates has started.

H03 The manager host on which JP1/IM - Manager operates cannot be reached from JP1/IM - View. Check the network configuration.

Other than above -- For the displayed message, perform the action indicated under O.

Legend:

--: Not applicable

Detailed information	Cause	Corrective action
B00	The manager host on which JP1/IM - Manager operates cannot be reached from JP1/IM - View.	Check the network configuration.
B01	JP1/IM - Manager is not running.	Check whether JP1/IM - Manager has started.
B04	The host name cannot be resolved.	Check the network configuration.
B06	The host name cannot be resolved.	Check the network configuration.
B32	A timeout occurred between JP1/IM - View and JP1/IM - Manager.	Increase the value set to SO_TIMEOUT.
H00	The host name cannot be resolved.	Check the network configuration.
H01	A connection cannot be established through the specified port.	Check the port settings.
H02	A connection cannot be established to JP1/IM - Manager.	Check whether the host on which JP1/IM - Manager operates has started.
H03	The manager host on which JP1/IM - Manager operates cannot be reached from JP1/IM - View.	Check the network configuration.
Other than above	--	For the displayed message, perform the action indicated under O.

[Contents][Back][Next]

[Trademarks]