Job Management Partner 1/Integrated Management - Manager Command and Definition File Reference

List of definition files

The following table lists and describes the JP1/Integrated Management definition files.

Table 2-1 List of definition files

Product name Definition file name Description

JP1/Base Configuration definition file (jbs_route.conf) Defines the system hierarchy that is to be managed by JP1/IM.

Environment variable file Defines environment variables to be used when commands are executed at managed hosts in JP1/IM.

Host group definition file Defines a group of managed hosts in JP1/IM.

JP1/IM - Manager Central Console Automated action environment definition file (action.conf.update) Defines an execution environment for automated actions.

Automated action definition file (actdef.conf) Defines conditions for executing an automated action and the command to be executed as the action.

Automated action definition file (actdef.conf) (for conversion) Defines (for conversion) conditions for executing an automated action and the command to be executed as the action.

Automatic action notification definition file (actnotice.conf) Defines the automated action status notification function.

Extended startup process definition file (jp1co_service.conf) Defines process information for the functions that constitute JP1/IM - Manager.

IM parameter definition file (jp1co_param_V7.conf) Defines whether a JP1 event is to be issued when JP1/IM - Manager processes fail or when JP1/IM - Manager processes are recovered automatically from abnormal termination.

System profile (.system) Defines environment information for the basic operation of the event console.

User profile (defaultUser | profile_user-name) Defines environment information for how the Event Console window is displayed.

Communication environment definition file (console.conf.update) Defines communication processing (timeout period) among JP1/IM - Manager, the viewer, and the jcochstat command.

Health check definition file (jcohc.conf) Defines whether the health check function is to be enabled.

Web-based operation definition file (console.html) Defines the operation of Web-based JP1/IM - View.

Event guide information file (jco_guide.txt) Defines event guide information for JP1 events that occur in the system and create problems.

Status event definition file (processupdate.conf) Defines whether a JP1 event is to be issued when the action status changes.

Correlation event generation system profile (egs_system.conf) Defines the start and stop operations for the Event Generation Service.

Correlation event generation definition file Defines the JP1 event conditions that result in generation of correlation events and the correlation events that are generated when the JP1 event conditions are satisfied.

Correlation event generation environment definition file Defines the size and number of correlation event generation history files.

Severity changing definition file (jcochsev.conf) Defines conditions for changing the severity of JP1events and the new severity level.

File that defines which items are displayed for event conditions (attr_list.conf) Specifies the items to be displayed in the Attribute name field in the Action Parameter Detailed Definitions window.

Configuration file for converting information (event_info_replace.conf) Specifies the conversion rules for the automated action event inheriting function.

Item file Specifies the JP1 event attributes that are to be output during output of event reports.

Filter file Defines filter conditions to be applied during output of event reports.

Definition file for extended event attributes Defines extended attributes of JP1 events.

Definition file for object types Defines the object types of the extended attributes of JP1 events.

Central Scope Host information file (jcs_hosts) Defines the host information that is managed by JP1/IM - Manager (JP1/IM - Central Scope).

Guide information file (jcs_guide.txt)^#1 Defines guide information about the JP1 events that trigger a change in monitoring object status.

Settings file for the maximum number of status change events (evhist_warn_event_xxx.conf)^#2 Defines whether a JP1 event is to be issued when the number of status change events for a monitoring object exceeds a maximum value.

Settings file for the completed-action linkage function (action_complete_xxx.conf)^#2 Defines whether the completed-action linkage function is to be enabled.

Definition file for automatic delete mode of status change event Defines whether the function that automatically deletes the status change events when a JP1 event's status becomes Processed is to be enabled.

Definition file for monitoring object initialization mode Defines whether the function that initializes monitoring objects when a specific JP1 event is received is to be enabled.

Automatic backup and recovery settings file for the monitoring object database (auto_dbbackup_xxx.conf)^#2 Defines whether the function that protects the monitoring object database from corruption caused by OS shutdown or cluster system switching during monitoring tree update processing is to be enabled.

Definition file for on memory mode of status change condition Specifies whether the memory-resident status change condition function is to be enabled.

Definition file for opening monitor windows Defines settings for opening monitor windows.

IM Configuration Management Operation definition file for IM Configuration Management - View (jcfview.conf) Specifies the operation of IM Configuration Management - View.

IM database Setup information file (jimdbsetupinfo.conf) Specifies setup information, such as the size of the IM database and the directory for storing data for the IM database, when the integrated monitoring database and IM Configuration Management database are set up.

Cluster setup information file (jimdbclustersetupinfo.conf) Specifies setup information, such as the size of the IM database and the directory for storing data for the IM database, when the integrated monitoring database and IM Configuration Management database are set up in a cluster environment.

JP1/IM - View Communication environment definition file (view.conf.update) Defines timeout periods for communication between JP1/IM - View and JP1/IM - Manager (JP1/IM - Central Console).

Communication environment definition file (tree_view.conf.update) Defines timeout periods for communication between JP1/IM - View and JP1/IM - Manager (JP1/IM - Central Scope).

IM-View settings file (tuning.conf) Defines the operation of JP1/IM - View, such as the number of connected-host log entries in the Login window and the operation when the Event Console window is displayed.

Web page call definition file (hitachi_jp1_product-name.html) Used for calling another product's Web page from the Tool Launcher window.

Start program definition file (!JP1_CS_APP0.conf) Defines the start path for a program that is added to the toolbar in the Monitoring Tree window.

Toolbar definition file (!JP1_CS_FTOOL0.conf) Defines the order of programs that are added to the toolbar in the Monitoring Tree window.

Icon operation definition file (!JP1_CS_FTREE0.conf) Defines the operation of icons that are added to the toolbar in the Monitoring Tree window.

Configuration file for monitoring tree Defines the configuration of the monitoring tree that is displayed in the Monitoring Tree window.

Definition file for executing applications Defines the IDs and paths of applications that are executed by the viewer.

Definition file for the Tool Launcher window Defines the tree that is to be displayed in the Tool Launcher window.

#1: The guide information file used in the UNIX version of JP1/IM - Manager depends on the language used by the JP1/IM - Manager. The xxx part of the guide information file (jcs_guide.txt) is explained later in this chapter in the section on the guide information file.

#2: There are two settings files for the maximum number of status change events, two settings files for the completed-action linkage function, and two automatic backup and recovery settings files for the monitoring object database. Either on or off is set in xxx.

Product name	Definition file name	Description
JP1/Base	Configuration definition file (jbs_route.conf)	Defines the system hierarchy that is to be managed by JP1/IM.
Environment variable file	Defines environment variables to be used when commands are executed at managed hosts in JP1/IM.
Host group definition file	Defines a group of managed hosts in JP1/IM.
JP1/IM - Manager	Central Console	Automated action environment definition file (action.conf.update)	Defines an execution environment for automated actions.
Automated action definition file (actdef.conf)	Defines conditions for executing an automated action and the command to be executed as the action.
Automated action definition file (actdef.conf) (for conversion)	Defines (for conversion) conditions for executing an automated action and the command to be executed as the action.
Automatic action notification definition file (actnotice.conf)	Defines the automated action status notification function.
Extended startup process definition file (jp1co_service.conf)	Defines process information for the functions that constitute JP1/IM - Manager.
IM parameter definition file (jp1co_param_V7.conf)	Defines whether a JP1 event is to be issued when JP1/IM - Manager processes fail or when JP1/IM - Manager processes are recovered automatically from abnormal termination.
System profile (.system)	Defines environment information for the basic operation of the event console.
User profile (defaultUser \| profile_user-name)	Defines environment information for how the Event Console window is displayed.
Communication environment definition file (console.conf.update)	Defines communication processing (timeout period) among JP1/IM - Manager, the viewer, and the jcochstat command.
Health check definition file (jcohc.conf)	Defines whether the health check function is to be enabled.
Web-based operation definition file (console.html)	Defines the operation of Web-based JP1/IM - View.
Event guide information file (jco_guide.txt)	Defines event guide information for JP1 events that occur in the system and create problems.
Status event definition file (processupdate.conf)	Defines whether a JP1 event is to be issued when the action status changes.
Correlation event generation system profile (egs_system.conf)	Defines the start and stop operations for the Event Generation Service.
Correlation event generation definition file	Defines the JP1 event conditions that result in generation of correlation events and the correlation events that are generated when the JP1 event conditions are satisfied.
Correlation event generation environment definition file	Defines the size and number of correlation event generation history files.
Severity changing definition file (jcochsev.conf)	Defines conditions for changing the severity of JP1events and the new severity level.
File that defines which items are displayed for event conditions (attr_list.conf)	Specifies the items to be displayed in the Attribute name field in the Action Parameter Detailed Definitions window.
Configuration file for converting information (event_info_replace.conf)	Specifies the conversion rules for the automated action event inheriting function.
Item file	Specifies the JP1 event attributes that are to be output during output of event reports.
Filter file	Defines filter conditions to be applied during output of event reports.
Definition file for extended event attributes	Defines extended attributes of JP1 events.
Definition file for object types	Defines the object types of the extended attributes of JP1 events.
Central Scope	Host information file (jcs_hosts)	Defines the host information that is managed by JP1/IM - Manager (JP1/IM - Central Scope).
Guide information file (jcs_guide.txt)^#1	Defines guide information about the JP1 events that trigger a change in monitoring object status.
Settings file for the maximum number of status change events (evhist_warn_event_xxx.conf)^#2	Defines whether a JP1 event is to be issued when the number of status change events for a monitoring object exceeds a maximum value.
Settings file for the completed-action linkage function (action_complete_xxx.conf)^#2	Defines whether the completed-action linkage function is to be enabled.
Definition file for automatic delete mode of status change event	Defines whether the function that automatically deletes the status change events when a JP1 event's status becomes Processed is to be enabled.
Definition file for monitoring object initialization mode	Defines whether the function that initializes monitoring objects when a specific JP1 event is received is to be enabled.
Automatic backup and recovery settings file for the monitoring object database (auto_dbbackup_xxx.conf)^#2	Defines whether the function that protects the monitoring object database from corruption caused by OS shutdown or cluster system switching during monitoring tree update processing is to be enabled.
Definition file for on memory mode of status change condition	Specifies whether the memory-resident status change condition function is to be enabled.
Definition file for opening monitor windows	Defines settings for opening monitor windows.
IM Configuration Management	Operation definition file for IM Configuration Management - View (jcfview.conf)	Specifies the operation of IM Configuration Management - View.
IM database	Setup information file (jimdbsetupinfo.conf)	Specifies setup information, such as the size of the IM database and the directory for storing data for the IM database, when the integrated monitoring database and IM Configuration Management database are set up.
Cluster setup information file (jimdbclustersetupinfo.conf)	Specifies setup information, such as the size of the IM database and the directory for storing data for the IM database, when the integrated monitoring database and IM Configuration Management database are set up in a cluster environment.
JP1/IM - View	Communication environment definition file (view.conf.update)	Defines timeout periods for communication between JP1/IM - View and JP1/IM - Manager (JP1/IM - Central Console).
Communication environment definition file (tree_view.conf.update)	Defines timeout periods for communication between JP1/IM - View and JP1/IM - Manager (JP1/IM - Central Scope).
IM-View settings file (tuning.conf)	Defines the operation of JP1/IM - View, such as the number of connected-host log entries in the Login window and the operation when the Event Console window is displayed.
Web page call definition file (hitachi_jp1_product-name.html)	Used for calling another product's Web page from the Tool Launcher window.
Start program definition file (!JP1_CS_APP0.conf)	Defines the start path for a program that is added to the toolbar in the Monitoring Tree window.
Toolbar definition file (!JP1_CS_FTOOL0.conf)	Defines the order of programs that are added to the toolbar in the Monitoring Tree window.
Icon operation definition file (!JP1_CS_FTREE0.conf)	Defines the operation of icons that are added to the toolbar in the Monitoring Tree window.
Configuration file for monitoring tree	Defines the configuration of the monitoring tree that is displayed in the Monitoring Tree window.
Definition file for executing applications	Defines the IDs and paths of applications that are executed by the viewer.
Definition file for the Tool Launcher window	Defines the tree that is to be displayed in the Tool Launcher window.

[Contents][Back][Next]

[Trademarks]