Job Management Partner 1/Integrated Management - Manager Command and Definition File Reference

File that defines which items are displayed for event conditions (attr_list.conf)

Format

# comment-line
attribute-name
attribute-name
attribute-name
   .
   .
   .
attribute-name

File

attr_list.conf (file that defines which items are displayed for event conditions)

attr_list.conf.model (model file for the file that defines which items are displayed for event conditions

Storage directory

In Windows

Console-path\conf\action\attr_list
shared-folder\jp1cons\conf\action\attr_list

In UNIX

/etc/opt/jp1cons/conf/action/attr_list
shared-directory/jp1cons/conf/action/attr_list

Description

This file defines the items to be displayed in the Attribute name field in the Action Parameter Detailed Definitions window. The Action Parameter Detailed Definitions window displays the items in the Attribute name field in the order they are specified in this file.

When the definitions are applied

The file that defines which items are displayed for event conditions is loaded when Central Console is started or when the jco_spmd_reload command is executed. When JP1/IM - View displays the Action Parameter Definitions window, it acquires the contents of the file that defines the items and which was loaded by Central Console, and then applies the file's contents to the Action Parameter Detailed Definitions window.

Information that is specified

attribute-name

Specifies an item to be displayed in the Attribute name field of the Action Parameter Detailed Definitions window. Specify the attribute name of each item that is to be displayed with one item per line. You can specify from 0 to 256 items.

An attribute name is case sensitive. Any space or tab character immediately preceding or following the attribute name will be ignored.

The table below lists the attribute names that can be specified.

If you specify SEPARATOR, a horizontal line, such as --------------------, is displayed in the Attribute name field of the Action Parameter Detailed Definitions window. You can use SEPARATOR to separate the items that are used often from the items that are used infrequently.

If you specify only SEPARATOR, only a horizontal line is displayed in the Attribute name field. In such a case, no event condition can be set by selecting the separator line and then adding an event condition.

Table 2-15 List of items that can be displayed

No. Display item Attribute name

1 Source host B.SOURCESERVER

2 Event level E.SEVERITY

3 Object type E.OBJECT_TYPE

4 Object name E.OBJECT_NAME

5 Root object type E.ROOT_OBJECT_TYPE

6 Root object name E.ROOT_OBJECT_NAME

7 Occurrence E.OCCURRENCE

8 User name E.USER_NAME

9 Message B.MESSAGE

10 Product name E.PRODUCT_NAME

11 Event ID B.ID

12 Start time E.START_TIME

13 End time E.END_TIME

14 Registered time B.TIME

15 Arrived time B.ARRIVEDTIME

16 Program-specific extended attribute OTHER_EXTENDED_ATTRIBUTE

17 Reason for registration B.REASON

18 Source process ID B.PROCESSID

19 Source user name B.USERNAME

20 Source user ID B.USERID

21 Source group name B.GROUPNAME

22 Source group ID B.GROUPID

23 Source IP address B.SOURCEIPADDR

24 Object ID E.OBJECT_ID

25 Termination code E.RESULT_CODE

26 Basic event information B.BASIC

27 Detailed event information B.DETAIL

28 -------------------- SEPARATOR

Note:

If an attribute name has already been specified, subsequent specifications of the same name are ignored.

If a read error occurs in the file that defines the items to be displayed for event conditions such that there are no valid display items, the default values are displayed for Nos. 1 through 25 in the table above.

#comment-statement

A line beginning with a hash mark (#) is treated as a comment.

No.	Display item	Attribute name
1	Source host	B.SOURCESERVER
2	Event level	E.SEVERITY
3	Object type	E.OBJECT_TYPE
4	Object name	E.OBJECT_NAME
5	Root object type	E.ROOT_OBJECT_TYPE
6	Root object name	E.ROOT_OBJECT_NAME
7	Occurrence	E.OCCURRENCE
8	User name	E.USER_NAME
9	Message	B.MESSAGE
10	Product name	E.PRODUCT_NAME
11	Event ID	B.ID
12	Start time	E.START_TIME
13	End time	E.END_TIME
14	Registered time	B.TIME
15	Arrived time	B.ARRIVEDTIME
16	Program-specific extended attribute	OTHER_EXTENDED_ATTRIBUTE
17	Reason for registration	B.REASON
18	Source process ID	B.PROCESSID
19	Source user name	B.USERNAME
20	Source user ID	B.USERID
21	Source group name	B.GROUPNAME
22	Source group ID	B.GROUPID
23	Source IP address	B.SOURCEIPADDR
24	Object ID	E.OBJECT_ID
25	Termination code	E.RESULT_CODE
26	Basic event information	B.BASIC
27	Detailed event information	B.DETAIL
28	--------------------	SEPARATOR

Example definition

 
B.SOURCESERVER
E.SEVERITY
E.OBJECT_TYPE
E.OBJECT_NAME
E.ROOT_OBJECT_TYPE
E.ROOT_OBJECT_NAME
E.OCCURRENCE
E.USER_NAME
B.MESSAGE
E.PRODUCT_NAME
B.ID
E.START_TIME
E.END_TIME
B.TIME
B.ARRIVEDTIME
OTHER_EXTENDED_ATTRIBUTE
B.REASON
B.PROCESSID
B.USERNAME
B.USERID
B.GROUPNAME
B.GROUPID
B.SOURCEIPADDR
E.OBJECT_ID
E.RESULT_CODE

[Contents][Back][Next]

[Trademarks]