ハイブリッド方式の場合

スケーラブルデータベースサーバ　HiRDB Version 8 ディザスタリカバリシステム　構築・運用ガイド

付録A.1　ハイブリッド方式の場合

ハイブリッド方式のリアルタイムSANレプリケーションを使用する場合の，HiRDBのシステム定義，RAID Managerの構成定義，ならびにサーバマシンおよびディスク構成を次に示します。

＜この項の構成＞: (1)　システム共通定義の例; (2)　ユニット制御情報定義の例; (3)　シングルサーバ定義の例; (4)　RAID Managerの構成定義の例; (5)　サーバマシンおよびディスク構成

●メインサイト

# ALL RIGHTS RESERVED. COPYRIGHT (C) 1994, 2006, HITACHI, LTD.
# LICENSED MATERIAL OF HITACHI, LTD.
#*******************************************************************************
# pdsys : system common definition
#*******************************************************************************
set pd_system_id = HRD1         #HRD1:system-id(change your environment)
set pd_name_port = 22200        #22200:port-number(change your environment)
set pd_mode_conf = MANUAL2
set pd_max_users = 2
set pd_max_access_tables = 50
set pd_rise_use = Y
set pd_rise_pairvolume_combination = hybrid
set pd_rise_fence_level = data
set pd_rise_disaster_mode = normal
      :
pdunit -x HST1 -u unt1 -d /opt/HiRDB_S
pdstart -t SDS -s sds01 -x HST1
pdbuffer -a gbuf01 -n 20 -r rdmast,rddirt -w 20
pdbuffer -a gbuf02 -n 20 -r rddict -w 20
pdbuffer -a gbuf03 -n 100 -o -w 20
      :
putenv HORCMINST 10

●リモートサイト

# ALL RIGHTS RESERVED. COPYRIGHT (C) 1994, 2006, HITACHI, LTD.
# LICENSED MATERIAL OF HITACHI, LTD.
#*******************************************************************************
# pdsys : system common definition
#*******************************************************************************
set pd_system_id = HRD1         #HRD1:system-id(change your environment)
set pd_name_port = 22200        #22200:port-number(change your environment)
set pd_mode_conf = MANUAL2
set pd_max_users = 2
set pd_max_access_tables = 50
set pd_rise_use = Y
set pd_rise_pairvolume_combination = hybrid
set pd_rise_fence_level = data
set pd_rise_disaster_mode = normal
      :
pdunit -x HST2 -u unt1 -d /opt/HiRDB_S
pdstart -t SDS -s sds01 -x HST2
pdbuffer -a gbuf01 -n 20 -r rdmast,rddirt -w 20
pdbuffer -a gbuf02 -n 20 -r rddict -w 20
pdbuffer -a gbuf03 -n 100 -o -w 20
      :
putenv HORCMINST 10

(2)　ユニット制御情報定義の例

●メインサイト

# ALL RIGHTS RESERVED. COPYRIGHT (C) 1994, 2006, HITACHI, LTD.
# LICENSED MATERIAL OF HITACHI, LTD.
# example definition of HiRDB/single server
#*******************************************************************************
# pdutsys : unit control information definition
#*******************************************************************************
#-------------------------------------------------------------------------------
# set form
#
set pd_unit_id = unt1               #unt1:unit-name(change your environment)
set pd_hostname = HST1
set pd_syssts_file_name_1 = "utsts1",\
                   "/opt/HiRDB_S/rdsys01/utsts1a","/opt/HiRDB_S/rdsys02/utsts1b"
set pd_syssts_file_name_2 = "utsts2",\
                   "/opt/HiRDB_S/rdsys03/utsts2a","/opt/HiRDB_S/rdsys01/utsts2b"
set pd_syssts_file_name_3 = "utsts3",\
                   "/opt/HiRDB_S/rdsys02/utsts3a","/opt/HiRDB_S/rdsys03/utsts3b"
set pd_syssts_initial_error = stop
set pd_syssts_singleoperation = stop
#set pd_syssts_last_active_file = utsts1
#set pd_syssts_last_active_side = A

●リモートサイト

# ALL RIGHTS RESERVED. COPYRIGHT (C) 1994, 2006, HITACHI, LTD.
# LICENSED MATERIAL OF HITACHI, LTD.
# example definition of HiRDB/single server
#*******************************************************************************
# pdutsys : unit control information definition
#*******************************************************************************
#-------------------------------------------------------------------------------
# set form
#
set pd_unit_id = unt1               #unt1:unit-name(change your environment)
set pd_hostname = HST2
set pd_syssts_file_name_1 = "utsts1",\
                   "/opt/HiRDB_S/rdsys01/utsts1a","/opt/HiRDB_S/rdsys02/utsts1b"
set pd_syssts_file_name_2 = "utsts2",\
                   "/opt/HiRDB_S/rdsys03/utsts2a","/opt/HiRDB_S/rdsys01/utsts2b"
set pd_syssts_file_name_3 = "utsts3",\
                   "/opt/HiRDB_S/rdsys02/utsts3a","/opt/HiRDB_S/rdsys03/utsts3b"
set pd_syssts_initial_error = stop
set pd_syssts_singleoperation = stop
#set pd_syssts_last_active_file = utsts1
#set pd_syssts_last_active_side = A

(3)　シングルサーバ定義の例

●メインサイトおよびリモートサイト共通

# ALL RIGHTS RESERVED. COPYRIGHT (C) 1994, 2006, HITACHI, LTD.
# LICENSED MATERIAL OF HITACHI, LTD.
# example definition of HiRDB/single server
#*******************************************************************************
# sds01 : single server definition
#*******************************************************************************
      :
set pd_log_dual = Y
#set pd_log_singleoperation = N
set pd_sts_file_name_1 = "sts1",\
                "/opt/HiRDB_S/rdsys11/sts1a","/opt/HiRDB_S/rdsys12/sts1b"
set pd_sts_file_name_2 = "sts2",\
                "/opt/HiRDB_S/rdsys13/sts2a","/opt/HiRDB_S/rdsys11/sts2b"
set pd_sts_file_name_3 = "sts3",\
                "/opt/HiRDB_S/rdsys12/sts3a","/opt/HiRDB_S/rdsys13/sts3b"
set pd_sts_initial_error = stop
set pd_sts_singleoperation = stop
set pd_spd_dual = Y
      :
#   --- system log file ---
pdlogadfg -d sys -g log1 ONL
pdlogadfg -d sys -g log2 ONL
pdlogadfg -d sys -g log3 ONL
pdlogadfg -d sys -g log4 ONL
pdlogadfg -d sys -g log5 ONL
pdlogadfg -d sys -g log6 ONL
pdlogadpf -d sys -g log1 -a "/opt/HiRDB_S/rdsys21/log1a"\
                         -b "/opt/HiRDB_S/rdsys22/log1b"
pdlogadpf -d sys -g log2 -a "/opt/HiRDB_S/rdsys21/log2a"\
                         -b "/opt/HiRDB_S/rdsys22/log2b"
pdlogadpf -d sys -g log3 -a "/opt/HiRDB_S/rdsys21/log3a"\
                         -b "/opt/HiRDB_S/rdsys22/log3b"
pdlogadpf -d sys -g log4 -a "/opt/HiRDB_S/rdsys23/log4a"\
                         -b "/opt/HiRDB_S/rdsys24/log4b"
pdlogadpf -d sys -g log5 -a "/opt/HiRDB_S/rdsys23/log5a"\
                         -b "/opt/HiRDB_S/rdsys24/log5b"
pdlogadpf -d sys -g log6 -a "/opt/HiRDB_S/rdsys23/log6a"\
                         -b "/opt/HiRDB_S/rdsys24/log6b"
#   --- syncpoint dump file ---
pdlogadfg -d spd -g spd1 ONL
pdlogadfg -d spd -g spd2 ONL
pdlogadfg -d spd -g spd3 ONL
pdlogadpf -d spd -g spd1 -a "/opt/HiRDB_S/rdsys31/spd1a"\
                         -b "/opt/HiRDB_S/rdsys32/spd1b"
pdlogadpf -d spd -g spd2 -a "/opt/HiRDB_S/rdsys31/spd2a"\
                         -b "/opt/HiRDB_S/rdsys32/spd2b"
pdlogadpf -d spd -g spd3 -a "/opt/HiRDB_S/rdsys31/spd3a"\
                         -b "/opt/HiRDB_S/rdsys32/spd3b"

(4)　RAID Managerの構成定義の例

●メインサイト

HORCM_MON
#ip_address  service   poll(10ms)  timeout(10ms)
HST1         horcm          1000            3000
 
HORCM_CMD
#dev_name
/dev/rdsk/c0t0d1
 
HORCM_DEV
#dev_group           dev_name    port#  TargetID  LU#
HRD1_unt1_USTS       hitdev1     CL1-A         1    1
HRD1_unt1_USTS       hitdev2     CL1-A         1    2
HRD1_unt1_USTS       hitdev3     CL1-A         1    3
HRD1_sds01_SSTS      hitdev4     CL1-A         1    4
HRD1_sds01_SSTS      hitdev5     CL1-A         1    5
HRD1_sds01_SSTS      hitdev6     CL1-A         1    6
HRD1_sds01_LOG       hitdev7     CL1-A         1    7
HRD1_sds01_LOG       hitdev8     CL1-A         1    8
HRD1_sds01_LOG       hitdev9     CL1-A         1    9
HRD1_sds01_LOG       hitdev10    CL1-A         1   10
HRD1_sds01_SPD       hitdev11    CL1-A         1   11
HRD1_sds01_SPD       hitdev12    CL1-A         1   12
HRD1_sds01_DB        hitdev13    CL1-A         1   13
HRD1_sds01_DB        hitdev14    CL1-A         1   14
HRD1_sds01_DB        hitdev15    CL1-A         1   15
HRD1_sds01_DB        hitdev16    CL1-A         1   16
 
HORCM_INST#dev_group             ip_address  service
HRD1_unt1_USTS         HST2      horcm
HRD1_sds01_SSTS        HST2      horcm
HRD1_sds01_LOG         HST2      horcm
HRD1_sds01_SPD         HST2      horcm
HRD1_sds01_DB          HST2      horcm

●リモートサイト

HORCM_MON
#ip_address  service   poll(10ms)  timeout(10ms)
HST2         horcm          1000            3000
 
HORCM_CMD
#dev_name
/dev/rdsk/c0t0d1
 
HORCM_DEV
#dev_group           dev_name    port#  TargetID  LU#
HRD1_unt1_USTS       hitdev1     CL1-D         2    1
HRD1_unt1_USTS       hitdev2     CL1-D         2    2
HRD1_unt1_USTS       hitdev3     CL1-D         2    3
HRD1_sds01_SSTS      hitdev4     CL1-D         2    4
HRD1_sds01_SSTS      hitdev5     CL1-D         2    5
HRD1_sds01_SSTS      hitdev6     CL1-D         2    6
HRD1_sds01_LOG       hitdev7     CL1-D         2    7
HRD1_sds01_LOG       hitdev8     CL1-D         2    8
HRD1_sds01_LOG       hitdev9     CL1-D         2    9
HRD1_sds01_LOG       hitdev10    CL1-D         2   10
HRD1_sds01_SPD       hitdev11    CL1-D         2   11
HRD1_sds01_SPD       hitdev12    CL1-D         2   12
HRD1_sds01_DB        hitdev13    CL1-D         2   13
HRD1_sds01_DB        hitdev14    CL1-D         2   14
HRD1_sds01_DB        hitdev15    CL1-D         2   15
HRD1_sds01_DB        hitdev16    CL1-D         2   16
 
HORCM_INST
#dev_group  ip_address  service
#dev_group             ip_address  service
HRD1_unt1_USTS         HST1      horcm
HRD1_sds01_SSTS        HST1      horcm
HRD1_sds01_LOG         HST1      horcm
HRD1_sds01_SPD         HST1      horcm
HRD1_sds01_DB          HST1      horcm

付録A.1 ハイブリッド方式の場合

(1) システム共通定義の例

(2) ユニット制御情報定義の例

(3) シングルサーバ定義の例

(4) RAID Managerの構成定義の例

(5) サーバマシンおよびディスク構成

付録A.1　ハイブリッド方式の場合

(1)　システム共通定義の例

(2)　ユニット制御情報定義の例

(3)　シングルサーバ定義の例

(4)　RAID Managerの構成定義の例

(5)　サーバマシンおよびディスク構成