OpenTP1 Version 7 TP1/Client User's Guide TP1/Client/J
The following table lists and describes the TP1/Client/J environment definitions.
Table 5-1 List of TP1/Client/J environment definitions
No. | Operand | Description | Specification value |
---|---|---|---|
1 | dcnamuse | Specifies whether or not RPCs that use the name service are used | Y|<<N>> |
2 | dcnamport | Specifies the port number of the name service | <unsigned integer> ((5001-65535)) <<10000>> |
3 | dchost | Specifies the TP1/Server as a gateway | <character string> |
4 | dcwatchtim | Specifies the maximum time to wait for a response | <unsigned integer> ((0-65535)) <<180>> (seconds) |
5 | dccltinquiretime | Specifies the maximum time interval in permanent connection inquiry to another | <unsigned integer> ((0-1048575)) (seconds) |
6 | dcwatchtiminherit | Specifies whether or not the RAP-processing server inherits the CUP's maximum time to wait for a response when an RPC that uses the remote API facility is issued | Y|<<N>> |
7 | dcwatchtimrpcinherit | Specifies whether or not the TP1/Server inherits the CUP's maximum time to wait for a response | Y|<<N>> |
8 | dccltdelay | Specifies the maximum communication delay time | <unsigned integer> ((0-65535)) <<0>> (seconds) |
9 | dcselint | Specifies the reply message monitoring interval | <unsigned integer> ((1-65535)) <<100>> (milliseconds) |
10 | dccltextend | Specifies the facility extension level of TP1/Client/J | 00000000|00000001 |
11 | dccache | Specifies the maximum number of entries in the name cache | <unsigned integer> ((2-256)) <<8>> |
12 | dchostselect | Specifies whether or not to randomly select a TP1/Server as a gateway | Y|<<N>> |
13 | dcscddirect | Specifies whether or not RPCs that use the scheduler direct facility without querying information to the name service of TP1/Server are used | Y|<<N>> |
14 | dcscdport | Specifies the port number of the schedule service | <unsigned integer> ((5001-65535)) |
15 | dcscdloadpriority | Specifies whether or not the TP1/Server that accepts service requests as a gateway has priority for load-balance | Y|<<N>> |
16 | dcrapdirect | Specifies whether or not the facility for directly querying the RAP-processing listener without querying the information to the TP1/Server's name service (remote API facility) is used | <<Y>>|N |
17 | dcrapport | Specifies the port number of the RAP-processing listener | <unsigned integer> ((5001-65535)) |
18 | dcrapautoconnect | Specifies whether or not a permanent connection is established automatically between a CUP and a RAP-processing server | Y|<<N>> |
19 | dcerrtrace | Specifies whether or not the CUP collects an error trace | Y|<<N>> |
20 | dcerrtracepath | Specifies the directory for error trace files | <character string> |
21 | dcerrtracesize | Specifies the size of an error trace file | <unsigned integer> ((4096-1048576)) <<4096>> (bytes) |
22 | dcmethodtrace | Specifies whether or not the CUP collects a method trace | Y|<<N>> |
23 | dcmethodtracepath | Specifies the directory for method trace files | <character string> |
24 | dcmethodtracesize | Specifies the size of a method trace file | <unsigned integer> ((4096-1048576)) <<4096>> (bytes) |
25 | dcuaptrace | Specifies whether or not the CUP collects a UAP trace | Y|<<N>> |
26 | dcuaptracepath | Specifies the directory for UAP trace files | <character string> |
27 | dcuaptracesize | Specifies the size of a UAP trace file | <unsigned integer> ((4096-1048576)) <<4096>> (bytes) |
28 | dcdatatrace | Specifies whether or not the CUP collects a data trace | Y|<<N>> |
29 | dcdatatracepath | Specifies the directory for data trace files | <character string> |
30 | dcdatatracesize | Specifies the size of a data trace file | <unsigned integer> ((4096-1048576)) <<4096>> (bytes) |
31 | dcdatatracemaxsize | Specifies the maximum data size for a data trace | <unsigned integer> ((16-1048576)) <<128>> (bytes) |
32 | dcclttrstatisitem | Specifies the item of statistical information to be acquired for transaction branches | statistical-information-item[,statistical-information-item]... |
33 | dcclttroptiitem | Specifies the optimization items to be used to improve the performance of a global transaction that consists of multiple user servers | transaction-optimization-item[,transaction-optimization-item]... |
34 | dcclttrwatchtime | Specifies the maximum wait time for communications during transaction synchronization point processing | <unsigned integer> ((1-65535)) (seconds) |
35 | dcclttrrbinfo | Specifies whether or not information about the cause of the rollback is logged when a transaction branch rolls back | no|self|remote|all |
36 | dcclttrlimittime | Specifies the maximum executable time for a transaction branch | <unsigned integer> ((0-65535)) (seconds) |
37 | dcclttrrbrcv | Specifies whether or not a rollback completion report is received after sending a rollback instruction to RPC destination transaction branch | Y|N |
38 | dcclttrrecoverytype | Specifies the synchronization point processing method to use in the event of a UAP error | type1|type2|type3 |
39 | dcclttrexptm | Specifies the expiry time in a transaction branch | <unsigned integer> ((0-65535)) (seconds) |
40 | dcclttrcputm | Specifies the transaction branch CPU monitoring time | <unsigned integer> ((0-65535)) (seconds) |
41 | dcclttrexpsp | Specifies whether the monitoring time includes the time of subsequent types of processing when transaction branch processing is monitored | Y|N|F |
42 | dcsndrcvtype | Specifies the environment to initialize when the TCP/IP communication facility is used | DCCLT_ONEWAY_SND|DCCLT_ONEWAY_RCV|DCCLT_SNDRCV |
43 | dcrcvport | Specifies the port number of the receiving CUP | <unsigned integer> ((1-65535)) <<11000>> |
44 | dcsndhost | Specifies the host name of the node on which the MHP to be connected exists | <character string> |
45 | dcsndport | Specifies the port number of the MHP to be connected | <unsigned integer> ((1-65535)) <<12000>> |
46 | dcsockopenatrcv | Specifies the trigger for opening a reception socket (the trigger to start waiting to receive a connection from a remote computer) when sending and receiving is performed over a single connection while the TCP/IP communication facility is being used | Y|<<N>> |
47 | dcweburl | Specifies the URL of the TP1/Web whose service is requested | <path-name> |
48 | dccltdbgtrcfilecount | Specifies the maximum number of debug trace files | <unsigned integer> ((0-256)) <<0>> |
49 | dccltrpcmaxmsgsize | Specifies the maximum size of a message sent or received by RPC | <unsigned integer> ((1-8)) <<1>> (megabytes) |
50 | dcscdhostchange | Specifies whether or not to distribute to the RPCs the service request target schedulers specified in the dchost operand of the TP1/Client/J environment definition | Y|<<N>> |
51 | dccltloadbalance | Specifies whether or not to store in cache the information on the service request target scheduler with the smallest workload, from the information on multiple service request target schedulers obtained from the name server | Y|<<N>> |
52 | dccltcachetim | Specifies the cache expiration time | <unsigned integer> ((0-65535)) <<30>> (seconds) |
53 | dccltconnecttimeout | Specifies the maximum amount of length of time to wait until the connection is established | <unsigned integer> ((0-65535)) <<0>> (seconds) |
54 | dccltprftrace | Specifies whether or not to collect a performance analysis trace of the Cosminexus Application Server when TP1/Client/J is operated on a Cosminexus Application Server | <<Y>>|N |
55 | dccltprfinfosend | Specifies whether or not to add identification information in TP1/Client/J to the information that is output to the performance verification trace of OpenTP1, when an RPC that uses the name service or scheduler direct facility is issued to TP1/Server | <<Y>>|N |
56 | dccltnammlthost | Specifies whether or not to issue an RPC that uses the name service to a TP1/Server in the multi-homed host environment | Y|<<N>> |
57 | dccltdatacomp | Specifies whether or not the data compression facility is used | Y|<<N>> |
58 | dccltconnectinf | Specifies (in EBCDIK codes) the logical terminal name of the DCCM3 logical terminal as the terminal identification information | terminal-identification-information |
59 | dcscdmulti | Specifies whether or not the multi-scheduler facility is used | Y|<<N>> |
60 | dcscdmulticount | Specifies the number of processes for the multi-scheduler daemon | <unsigned integer> ((1-4096)) <<1>> |
61 | dccltcupsndhost | Specifies the CUP transmission source host | <character string> |
62 | dccltcuprcvport | Specifies the port number of the CUP that receives messages from the server | <unsigned integer> ((5001-65535)) |
63 | dcclttrcmplmttm | Specifies the maximum amount of time to allow for completion of a transaction | <unsigned integer> ((0-65535)) (seconds) |
All Rights Reserved. Copyright (C) 2006, 2009, Hitachi, Ltd.