mcftlsle (Display status of logical terminals)

-s MCF-communication-process-identifier~<numerals (0-9), a-f> ((01-ef))

Specifies the MCF communication process identifier of the MCF communication service controlling the target logical terminal. No more than one MCF communication process identifier can be specified.

If this option is omitted, the mcftlsle command is executed on all MCFs. This means that the overhead required to search for the MCF communication services is added to the processing load of the operation commands.

If you want to have a configuration that includes lots of MCF communication services or if you want to use many operation commands, use the -s option to specify an MCF communication process identifier.

-c connection-ID~<identifier, 1-8 characters>

Specifies the connection ID corresponding to a logical terminal whose status is to be displayed.

Neither more than one connection ID nor ID of a group of connections can be specified.

-l logical-terminal-name~<identifier, 1-8 characters>

Specifies the name of a logical terminal whose status is to be displayed.

If the -c option is specified, the logical terminal name corresponding to the specified connection ID must be specified.

A maximum of eight logical terminal names can be specified. When entering large amounts of inputs for the operation, specify more than one logical terminal or specify a group of logical terminals to increase the number of logical terminals to be processed in parallel by one command while reducing the number of commands to be entered.

To specify multiple logical terminal names, separate them by a space and enclose the entire string of logical terminal names in double quotation marks ("). The same logical terminal name cannot be duplicated when specified.

The asterisk (*) can be used in the specification to indicate a group of logical terminal names. The name of a group of logical terminals cannot coexist with the names of logical terminals for which no grouping is specified. A group name must be enclosed in double quotation marks (").

*: Specifies that the status of all logical terminals is to be displayed.

character-string*: Specifies leading characters of a logical terminal name when the status of all logical terminals with names beginning with the specified character string is to be displayed.

<Example of specifying more than one logical terminal>: To specify len1, len2, and len3, code: -l "len1len2len3"

<Example of specifying a group of logical terminals>: To specify all logical terminals beginning with len, code: -l "len*"

-q

Displays the held status of output queues for the specified logical terminal. When this option is omitted, the held status of output queues for the specified logical terminal is not displayed.

mmm llllllll sss [tttt]
    aaaaa bbbbbbbb
    SYNC xxxxxxxxxx yyyyyyyyyy zzzzzzzzzz
      IO     :        :        :
    PRIO     :        :        :
    NORM     :        :        :
    iii ooo

mmm: MCF identifier

llllllll: Logical terminal name

sss

Status of the logical terminal:

ACT: Shutdown released status

DCT: Shutdown status

tttt

Logical terminal test mode (displayed only when TP1/Message Control/Tester is used)

TEST: Test mode

(Blank) Non-test mode

aaaaa

Type of alternate sending (displayed when alternate sending is used)

ALT_F: Logical terminal of alternate origin

ALT_T: Logical terminal of alternate destination

bbbbbbbb: Logical terminal name (displayed only when alternate sending is used); If the applicable logical terminal is a terminal of alternate origin, the name of the logical terminal of alternate destination is displayed. In this case, ALT_T is displayed in aaaaa.

SYNC: Synchronous-type message

IO: Asynchronous-type inquiry-response message

PRIO: Asynchronous-type one-way sent message (priority)

NORM: Asynchronous-type one-way sent message (normal)

xxxxxxxxxx: Number of unsent messages (displayable up to the upper limit of unsigned short)

yyyyyyyyyy: Lowest serial number of unsent messages (displayable up to the upper limit of int)

zzzzzzzzzz: Highest serial number of unsent messages (displayable up to the upper limit of int)

iii

Held status of the input of output queues (displayed only when the -q option is specified)

NOH: Held status is released.

HLD: Held.

ooo

Held status of the scheduling of output queues (displayed only when the -q option is specified)

NOH: Held status is released.

HLD: Held.

Message ID	Description	Output destination
KFCA10350-I	mcftlsle command has been entered.	Standard output
KFCA10351-E	MCF startup processing is underway.	Standard error output
KFCA10352-E	MCF termination processing is underway.	Standard error output
KFCA10353-W	Input format is invalid.	Standard error output
KFCA10354-E	Memory is inadequate.	Standard error output
KFCA10355-W	Specification of an argument is invalid.	Standard error output
KFCA10356-E	Overtime occurred during process.	Standard error output
KFCA10357-E	Overtime occurred in MCF.	Standard error output
KFCA10358-E	Error occurred in an internal function.	Standard error output
KFCA10359-W	Response to mcftlsle command input source failed.	Message log file
KFCA10360-I	Status display has started.	Standard output
KFCA10364-I	See the output format section above.	Standard output
KFCA10365-I	See the output format section above.	Standard output
KFCA10369-I	Status display has terminated.	Standard output
KFCA10373-E	mcftlsle command terminated abnormally.	Standard error output
KFCA10380-E	Retrieval of remote process failed.	Standard error output
KFCA10381-E	A specified connection ID has not been cataloged.	Standard error output
KFCA10382-E	A specified logical terminal has not been cataloged.	Standard error output
KFCA10390-E	Correspondence between specified connection ID and logical terminal name is invalid.	Standard error output
KFCA10391-E	mcftlsle command is not supported.	Standard error output
KFCA10395-E	The name of an unconnected logical terminal is specified in specified connection.	Standard error output
KFCA10505-I	Help message	Standard output
KFCA16402-E	RPC error occurred during command processing.	Standard error output