OpenTP1の定義の記述例

OpenTP1の定義の記述例を次に示します。OpenTP1の定義については，「4.1.1　OpenTP1の定義」を参照してください。なお，ユーザサービス定義ファイルは，通信サーバシステム定義で指定する各SPPのユーザサーバ名と同じです。この関連の詳細については，マニュアル「Hitachi Multi Payment Network communications server for Biller」を参照してください。

システム環境定義（env）

set mode_conf                   = MANUAL1
set user_command_online         = /home/HMPN/bin/hmpnblstart
set start_scheduling_timing     = AFTER
set system_init_watch_time      = 600
 
putenv  HMPNDIR /home/HMPN
putenv  LIBPATH    /usr/lib:\
                   /opt/hitachi/common/lib:\
                   /home/OpenTP1/lib:\
                   /home/oracle/app/oracle/product/9.2.0/lib32:\
                   /home/HMPN/usrlib:\
                   /home/HMPN/lib
putenv  NLSPATH    /usr/lib/nls/msg/%L/%N:\
                   /usr/lib/nls/%l/%t/%c/%N:\
                   /home/HMPN/lib/msg/%L/%N
putenv  PATH       /usr/bin:\
                   /usr/mqm/bin:\
                   /home/OpenTP1/bin:\
                   /home/HMPN/bin
putenv  LANG     Ja_JP

システムサービス構成定義（sysconf）
set uap_conf = Y set ha_conf = Y
プロセスサービス定義（prc）
prcsvpath /home/OpenTP1/aplib

ユーザサービスデフォルト定義（usrrc）

putenv  HMPNDIR /home/HMPN
putenv  PATH       /usr/bin:\
                   /usr/mqm/bin:\
                   /home/OpenTP1/bin:\
                   /home/HMPN/bin
putenv  LIBPATH    /usr/lib:\
                   /opt/hitachi/common/lib:\
                   /home/OpenTP1/lib:\
                   /home/oracle/app/oracle/product/9.2.0/lib32:\
                   /home/HMPN/usrlib:\
                   /home/HMPN/lib
putenv  NLSPATH    /usr/lib/nls/msg/%L/%N:\
                   /usr/lib/nls/%l/%t/%c/%N:\
                   /home/HMPN/lib/msg/%L/%N

照会SPP用ユーザサービス定義（HMpnRef）

set module                  = "HMpnRef"
set service_group           = "hmpn_ref_srvgrp"
set service                 = "hmpn_ref_srv=hmpn_ref_srv"
set parallel_count          = 4
set type                    = other
set hold                    = N
set service_hold            = N
set term_watch_time         = 30
set hold_recovery           = N
set receive_from            = queue
set atomic_update           = N
set node_down_restart       = N
set server_type             = "betran"
set cancel_normal_terminate = N
set critical                = N

消込SPP用ユーザサービス定義（HMpnPay）

set module                  = "HMpnPay"
set service_group           = "hmpn_pay_srvgrp"
set service                 = "hmpn_pay_srv=hmpn_pay_srv"
set parallel_count          = 4
set type                    = other
set hold                    = N
set service_hold            = N
set term_watch_time         = 30
set hold_recovery           = N
set receive_from            = queue
set atomic_update           = N
set node_down_restart       = N
set server_type             = "betran"
set cancel_normal_terminate = N
set critical                = N

取消SPP用ユーザサービス定義（HMpnCan）

set module                  = "HMpnCan"
set service_group           = "hmpn_can_srvgrp"
set service                 = "hmpn_can_srv=hmpn_can_srv"
set parallel_count          = 2
set type                    = other
set hold                    = N
set service_hold            = N
set term_watch_time         = 30
set hold_recovery           = N
set receive_from            = queue
set atomic_update           = N
set node_down_restart       = N
set server_type             = "betran"
set cancel_normal_terminate = N
set critical                = N

再送確認SPP用ユーザサービス定義（HMpnRes）

set module                  = "HMpnRes"
set service_group           = "hmpn_res_srvgrp"
set service                 = "hmpn_res_srv=hmpn_res_srv"
set parallel_count          = 2
set type                    = other
set hold                    = N
set service_hold            = N
set term_watch_time         = 30
set hold_recovery           = N
set receive_from            = queue
set atomic_update           = N
set node_down_restart       = N
set server_type             = "betran"
set cancel_normal_terminate = N
set critical                = N

収納カウンタ情報取得SPP用ユーザサービス定義（HMpnCnt）

set module                  = "HMpnCnt"
set service_group           = "hmpn_cnt_srvgrp"
set service                 = "hmpn_cnt_srv=hmpn_cnt_srv", \
                              "hmpn_cnt_run=hmpn_cnt_run"
set parallel_count          = 1
set type                    = other
set hold                    = N
set service_hold            = N
set term_watch_time         = 30
set hold_recovery           = N
set receive_from            = queue
set atomic_update           = N
set node_down_restart       = N
set server_type             = "betran"
set cancel_normal_terminate = N
set critical                = N

収納業務受付SPP用ユーザサービス定義（HMpnRdb）

set module                  = "HMpnRdb"
set service_group           = "hmpn_rdb_srvgrp"
set service                 = "hmpn_npayins_srv=hmpn_npayins_srv", \
                              "hmpn_npayupd_srv=hmpn_npayupd_srv", \
                              "hmpn_npayref_srv=hmpn_npayref_srv", \
                              "hmpn_npaycan_srv=hmpn_npaycan_srv", \
                              "hmpn_demins_srv=hmpn_demins_srv", \
                              "hmpn_demupd_srv=hmpn_demupd_srv", \
                              "hmpn_demref_srv=hmpn_demref_srv", \
                              "hmpn_demcan_srv=hmpn_demcan_srv", \
                              "hmpn_kpayref_srv=hmpn_kpayref_srv", \
                              "hmpn_cpayref_srv=hmpn_cpayref_srv", \
                              "hmpn_cntref_srv=hmpn_cntref_srv", \
                              "hmpn_msgref_srv=hmpn_msgref_srv"
set parallel_count          = 6
set type                    = other
set hold                    = N
set service_hold            = N
set term_watch_time         = 30
set hold_recovery           = N
set receive_from            = queue
set atomic_update           = N
set node_down_restart       = N
set server_type             = "betran"
set cancel_normal_terminate = N
set critical                = N

4.3.1 OpenTP1の定義の記述例

4.3.1　OpenTP1の定義の記述例