2.11.11 List of parameters used with the set and get subcommands
This topic explains parameters that can be specified as the identifiers to be set for the set and get subcommands.
Resource relation
- Parameters starting with applications.application.application-name.module.module-name.resources
-
No.
Parameter name
Description
Range Value
Default Value
Initial Value
Example
1
connector-connection-pool.connector_connection_pool_name.hitachi-connection-sharing-component-enabled
Enables or disables connection sharing within components. This setting is made in the connector connection pool in the module scope.
true|false
No Default Value
false
asadmin set applications.application.myapplication.module.mymodule.resources.connector-connection-pool.myconnectorconnectionpool.hitachi-connection-sharing-component-enabled=false
2
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-connection-sharing-component-enabled
Enables or disables connection sharing within components. This setting is made in the JDBC connection pool in the module scope.
true|false
No Default Value
false
asadmin set applications.application.myapplication.module.mymodule.resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-connection-sharing-component-enabled=false
3
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-jdbc-transaction-rollback-enabled
Enables or disables rollback of JDBC transactions when a connection closes. This setting is made in the JDBC connection pool in the module scope.
true|false
No Default Value
true
asadmin set applications.application.myapplication.module.mymodule.resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-jdbc-transaction-rollback-enabled=true
4
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-validation-timeout
Specifies the timeout time in seconds for connection error detection. This setting is made in the JDBC connection pool in the module scope.
1 to 2147483647
No Default Value
5
asadmin set applications.application.myapplication.module.mymodule.resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-validation-timeout=5
5
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-validation-timeout-enabled
Enables or disables timeout for connection error detection. This setting is made in the JDBC connection pool in the module scope.
true|false
No Default Value
true
asadmin set applications.application.myapplication.module.mymodule.resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-validation-timeout-enabled=true
- Parameters starting with applications.application.application-name.resources
-
No.
Parameter name
Description
Range Value
Default Value
Initial Value
Example
1
connector-connection-pool.connector_connection_pool_name.hitachi-connection-sharing-component-enabled
Enables or disables connection sharing within components. This setting is made in the connector connection pool in the application scope.
true|false
No Default Value
false
asadmin set applications.application.myapplication.resources.connector-connection-pool.myconnectorconnectionpool.hitachi-connection-sharing-component-enabled=false
2
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-connection-sharing-component-enabled
Enables or disables connection sharing within components. This setting is made in the JDBC connection pool in the application scope.
true|false
No Default Value
false
asadmin set applications.application.myapplication.resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-connection-sharing-component-enabled=false
3
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-jdbc-transaction-rollback-enabled
Enables or disables rollback of JDBC transactions when a connection closes. This setting is made in the JDBC connection pool in the application scope.
true|false
No Default Value
true
asadmin set applications.application.myapplication.resources.jdbc-connection-pool.myjdbcconnectionpool. hitachi-jdbc-transaction-rollback-enabled=true
4
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-validation-timeout
Specifies the timeout time in seconds for connection error detection. This setting is made in the JDBC connection pool in the application scope.
1 to 2147483647
No Default Value
5
asadmin set applications.application.myapplication.resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-validation-timeout=5
5
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-validation-timeout-enabled
Enables or disables timeout for connection error detection. This setting is made in the JDBC connection pool in the application scope.
true|false
No Default Value
true
asadmin set applications.application.myapplication.resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-validation-timeout-enabled=true
- Parameters starting with resources
-
No.
Parameter name
Description
Range Value
Default Value
Initial Value
Example
1
connector-connection-pool.connector_connection_pool_name.hitachi-connection-sharing-component-enabled
Enables or disables connection sharing within components. This setting is made in the connector connection pool created in the domain.
true|false
No Default Value
false
asadmin set resources.connector-connection-pool.myconnectorconnectionpool.hitachi-connection-sharing-component-enabled=false
2
connector-connection-pool.connector_connection_pool_name.idle-timeout-in-seconds
Set the maximum time that a connection can remain idle in the pool.
1 to 2147483647
300
No Value Specified
asadmin set resources.connector-connection-pool.ConnectionPool1.idle-timeout-in-seconds=200
3
connector-connection-pool.connector_connection_pool_name.max-pool-size
Set the maximum number of connections that can be created to satisfy client requests.
1 to 2147483647
24
No Value Specified
asadmin set resources.connector-connection-pool.ConnectionPool1.max-pool-size=60
4
connector-connection-pool.connector_connection_pool_name.max-wait-time-in-millis
Set the amount of time, in milliseconds, that a caller must wait before a connection is created, if a connection is not available.
0 to 2147483647
60000
No Value Specified
asadmin set resources.connector-connection-pool.ConnectionPool1.max-wait-time-in-millis=700000
5
connector-connection-pool.connector_connection_pool_name.pool-resize-quantity
Set the quantity by which the pool will scale up or scale down the number of connections.
1 to 2147483647
2
No Value Specified
asadmin set resources.connector-connection-pool.ConnectionPool1.pool-resize-quantity=4
6
connector-connection-pool.connector_connection_pool_name.property.property_name
Set the optional attribute name/value pairs for configuring the pool.
Type: String
No Default Value
No Value Specified
asadmin set resources.connector-connection-pool.ConnectionPool1.property.User=User1
7
connector-connection-pool.connector_connection_pool_name.steady-pool-size
The minimum and initial number of connections maintained in the pool.
0 to 2147483647
24
No Value Specified
asadmin set resources.connector-connection-pool.ConnectionPool1.steady-pool-size=30
8
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-connection-sharing-component-enabled
Enables or disables connection sharing within components. This setting is made in the JDBC connection pool created in the domain.
true|false
No Default Value
false
asadmin set resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-connection-sharing-component-enabled=false
9
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-jdbc-transaction-rollback-enabled
Enables or disables rollback of JDBC transactions when a connection closes. This setting is made in the JDBC connection pool created in the domain.
true|false
No Default Value
true
asadmin set resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-jdbc-transaction-rollback-enabled=true
10
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-validation-timeout
Specifies the timeout time in seconds for connection error detection. This setting is made in the JDBC connection pool created in the domain.
1 to 2147483647
No Default Value
5
asadmin set resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-validation-timeout=5
11
jdbc-connection-pool.JDBC_connection_pool_name.hitachi-validation-timeout-enabled
Enables or disables timeout for connection error detection. This setting is made in the JDBC connection pool created in the domain.
true|false
No Default Value
true
asadmin set resources.jdbc-connection-pool.myjdbcconnectionpool.hitachi-validation-timeout-enabled=true
12
jdbc-connection-pool.JDBC_connection_pool_name.idle-timeout-in-seconds
Set the maximum time, in seconds, that a connection can remain idle in the pool.
This timeout value must be kept shorter than the database server side timeout value to prevent the accumulation of unusable connections in the application.
0 to 2147483647
300
No Value Specified
asadmin set resources.jdbc-connection-pool.ConnectionPool1.idle-timeout-in-seconds=200
13
jdbc-connection-pool.JDBC_connection_pool_name.max-pool-size
Set the maximum number of connections that can be created.
1 to 2147483647
24
No Value Specified
asadmin set resources.jdbc-connection-pool.ConnectionPool1.max-pool-size=60
14
jdbc-connection-pool.JDBC_connection_pool_name.max-wait-time-in-millis
Set the amount of time, in milliseconds, that a caller will wait before a JDBC connection timeout is sent.
A value of 0 forces the caller to wait indefinitely.
0 to 2147483647
60000
No Value Specified
asadmin set resources.jdbc-connection-pool.ConnectionPool1.max-wait-time-in-millis=70000
15
jdbc-connection-pool.JDBC_connection_pool_name.pool-resize-quantity
Set the number of connections to be removed when idle-timeout-in-seconds timer expires.
1 to 2147483647
2
No Value Specified
asadmin set resources.jdbc-connection-pool.ConnectionPool1.pool-resize-quantity=4
16
jdbc-connection-pool.JDBC_connection_pool_name.property.property_name
Set the optional attribute name/value pairs for configuring the pool.
Type: String
No Default Value
No Value Specified
asadmin set resources.jdbc-connection-pool.ConnectionPool1.property.User=User1
17
jdbc-connection-pool.JDBC_connection_pool_name.steady-pool-size
Set the minimum and initial number of connections maintained in the pool.
0 to 2147483647
24
No Value Specified
asadmin set resources.jdbc-connection-pool.ConnectionPool1.steady-pool-size=30
18
mail-resource.JavaMail_resource_name.property.property_name
Set the optional property name/value pairs for configuring the JavaMail resource.
Type: String
No Default Value
No Value Specified
asadmin set resources.mail-resource.mymailresource.property.mail-from=xyz@abc.com
PRF relation
- Parameters starting with hitachi-prfs.hitachi-prf.PRF-name.
-
No.
Parameter name
Description
Range Value
Default Value#
Initial Value
Example
1
property.ex_property
Specifies the name and the value of an extended property to be added to PRF. The property name must start with ex_.
The added extended property can be used as a replacement character string to be written in PRF server template files.
Type: String
Property deletion
No Value Specified
asadmin set hitachi-prfs.hitachi-prf.PRF01.property.ex_timeout=600
2
property.env_environment_variables_name
Specifies the environment variable to be set when PRF starts. If you want to specify more than one environment variable, you must specify this standard property more than once.
If the specified environment variable value includes ${apserver.home}, it will be replaced by Application Server installation directory.
The environment variable value will not be inherited even if this property value contains a setting such as %PATH%;C:\temp or ${PATH}:/temp, which indicates that the environment variable value should be inherited. If you wish to specify such a value, make sure that you specify it in one of the following:
-
System environment variable of the operating system on the node
-
asenv definition on the node
-
Startup batch or shell script for the server template
If you need to set characters that cannot be specified for this property to the server environment variable, you must set the environment variable as explained below.
-
To set the environment variable, create an extended property on the server and then make sure that the value to be set for the environment variable is assigned to this extended property.
An example of such an extended property is shown below.
Extended property name: ex_myenv
Extended property value: value-to-be-set-for-environment-variable
-
Add lines of code to the script that exists in the server template and starts the server. For the environment variable, these lines of code must set the value of the extended property.
The following is an example of lines of code to be added:
MY_ENV=${property.ex_myenv.value}
export MY_ENV
Type: String
Only single-byte alphanumeric characters and the following symbols can be specified: percent signs (%), at-signs (@), plus symbols (+), hyphens (-), underscores (_), commas (,), and periods (.).
Property deletion
No Value Specified
asadmin set hitachi-prfs.hitachi-prf.PRF01.property.env_TZ=JST-9
3
property.log-file-count
Specifies the number of log files to be output by PRF.
This property corresponds to the -PrfLogFileCount option of the PRF cprfstart command.
1 to 32
Property deletion
No Value Specified
asadmin set hitachi-prfs.hitachi-prf.PRF01.property.log-file-count=16
4
property.log-file-size
Specifies in megabytes the largest possible size of log files to be output by PRF.
This property corresponds to the -PrfLogFileSize option of the PRF cprfstart command.
1 to 100
Property deletion
No Value Specified
asadmin set hitachi-prfs.hitachi-prf.PRF01.property.log-file-size=20
5
property.log-shift-time
Specifies the shift time for log files to be output by PRF.
This property corresponds to the -PrfLogShiftTime option of the PRF cprfstart command.
HHMMSS(000000 to 235959)
Property deletion
No Value Specified
asadmin set hitachi-prfs.hitachi-prf.PRF01.property.log-shift-time=121530
6
property.prf-spool
Specifies the output directory for the PRF trace.
Type: String
Property deletion
No Value Specified
asadmin set hitachi-prfs.hitachi-prf.PRF01.property.prf-spool=C:\PRFSPOOL\PRF01
7
property.trace-buffer-size
Specifies in kilobytes the buffer size for PRF trace files, to be allocated to shared memory.
This property corresponds to the -PrfTraceBufferSize option of the PRF cprfstart command.
512 to 102400
Property deletion
No Value Specified
asadmin set hitachi-prfs.hitachi-prf.PRF01.property.trace-buffer-size=16384
8
property.trace-count
Specifies the number of PRF trace files.
This property corresponds to the -PrfTraceCount option of the PRF cprfstart command.
3 to 256
Property deletion
No Value Specified
asadmin set hitachi-prfs.hitachi-prf.PRF01.property.trace-count=8
9
property.trace-file-size
Specifies in kilobytes the maximum possible size of one PRF trace file.
This property corresponds to the -PrfTraceFileSize option of the PRF cprfstart command.
1024 to 1048576
Property deletion
No Value Specified
asadmin set hitachi-prfs.hitachi-prf.PRF01.property.trace-file-size=16384
10
property.trace-level
Specifies the level of obtaining the PRF trace by using a four-byte hexadecimal number (eight digits). You can add 0x to the beginning, but 0x will be ignored. You can specify multiple values by using commas (,) at the left to separate the level values of index numbers.
This property corresponds to the -PrfTraceLevel option of the PRF cprfstart command.
Four-byte hexadecimal number (eight digits)[,four-byte hexadecimal number (eight digits)...]
Property deletion
No Value Specified
asadmin set hitachi-prfs.hitachi-prf.PRF01.property.trace-level=0x44445555
11
hitachi-prf-config-ref
Specifies a PRF configuration element. This attribute value cannot be changed by the set subcommand.
PRF configuration name that exists in the domain
Cannot be changed
No Value Specified
Cannot be changed
- Legend:
-
#: If "Property deletion" is shown in the "Default Value" column, specifying an empty string for the parameter deletes the property itself.
-
- Parameters starting with hitachi-prf-configs.hitachi-prf-config.PRF-configuration-name
-
If a parameter whose name begins with property. is also defined by Parameters starting with hitachi-prfs.hitachi-prf.PRF-name, the value defined by Parameters starting with hitachi-prfs.hitachi-prf.PRF-name has priority.
No.
Parameter name
Description
Range Value
Default Value#
Initial Value
Example
1
hitachi-manage-info.construct-command
Specifies the relative path (without the extension) from the template directory of each server type to the build command to be executed by PRF.
Type: String
There is no command to be executed.
<empty string>
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.construct-command=create-prf
2
hitachi-manage-info.destruct-command
Specifies the relative path (without the extension) from the template directory of each server type to the deletion command to be executed by PRF.
Type: String
There is no command to be executed.
<empty string>
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.destruct-command=delete-prf
3
hitachi-manage-info.get-pid-command
Specifies the relative path (without the extension) from the template directory of each server type to the process ID acquisition command to be executed by PRF.
Type: String
Cannot be omitted
bin/getpid-prf
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.get-pid-command=getpid-prf
4
hitachi-manage-info.running-watch-interval-in-seconds
Specifies in seconds the interval at which PRF operations are verified.
1 to 86400
Cannot be omitted
10
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.running-watch-interval-in-seconds=20
5
hitachi-manage-info.start-command
Specifies the relative path (without the extension) from the template directory of each server type to the startup command to be executed by PRF.
Type: String
Cannot be omitted
bin/start-prf
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.start-command=start-prf
6
hitachi-manage-info.start-timeout-in-seconds
Specifies in seconds the time during which to monitor whether PRF is started. If 0 is specified, the monitoring will not be performed.
0 to 3600
Cannot be omitted
60
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.start-timeout-in-seconds=180
7
hitachi-manage-info.start-type
Specifies how to start PRF.
-
direct: Direct startup
direct
Cannot be omitted
direct
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.start-type=direct
8
hitachi-manage-info.starting-watch-interval-in-seconds
Specifies in seconds the interval for monitoring whether PRF is started.
1 to 86400
Cannot be omitted
1
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.starting-watch-interval-in-seconds=3
9
hitachi-manage-info.starting-watch-start-time-in-seconds
Specifies the time (in seconds) from executing the startup command by PRF until starting to check the operation.
0 to 86400
Cannot be omitted
0
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.starting-watch-start-time-in-seconds=10
10
hitachi-manage-info.stop-command
Specifies the relative path (without the extension) from the template directory of each server type to the stop command to be executed by PRF.
Type: String
Cannot be omitted
bin/stop-prf
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.stop-command=stop-prf
11
hitachi-manage-info.stop-timeout-in-seconds
Specifies in seconds the time during which to monitor whether PRF is stopped. If 0 is specified, the monitoring will not be performed.
0 to 1800
Cannot be omitted
60
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.stop-timeout-in-seconds=180
12
hitachi-manage-info.stopping-watch-interval-in-seconds
Specifies in seconds the interval for monitoring whether PRF is stopped.
1 to 86400
Cannot be omitted
1
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.stopping-watch-interval-in-seconds=3
13
hitachi-manage-info.template-path
Specifies the absolute path of the server template for PRF.
An existing directory path
Cannot be omitted
domain root directory/domain name/server_templates/server type
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.template-path=C:\temp\prf
14
hitachi-manage-info.working-dir
Specifies the absolute path to the current directory of each command to be executed by PRF.
Type: String
node-directory/server-name
<empty string>
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.hitachi-manage-info.working-dir=C:\temp\prf\command
15
property.ex_property
Specifies the name and the value of an extended property to be added to PRF. The property name must start with ex_.
The added extended property can be used as a replacement character string to be written in PRF server template files.
Type: String
Property deletion
No Value Specified
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.property.ex_timeout=600
16
property.env_environment_variables_name
Specifies the environment variable to be set when PRF starts. If you want to specify more than one environment variable, you must specify this standard property more than once.
If the specified environment variable value includes ${apserver.home}, it will be replaced by Application Server installation directory.
The environment variable value will not be inherited even if this property value contains a setting such as %PATH%;C:\temp or ${PATH}:/temp, which indicates that the environment variable value should be inherited. If you wish to specify such a value, make sure that you specify it in one of the following:
-
System environment variable of the operating system on the node
-
asenv definition on the node
-
Startup batch or shell script for the server template
If you need to set characters that cannot be specified for this property to the server environment variable, you must set the environment variable as explained below.
-
To set the environment variable, create an extended property on the server and then make sure that the value to be set to the environment variable is assigned to this extended property.
An example of such an extended property is shown below.
Extended property name: ex_myenv
Extended property value: value-to-be-set-to-environment-variable
-
Add lines of code to the script that exists in the server template and starts the server. These lines of code must set the value of the extended property to the environment variable.
The following is an example of lines of code to be added:
MY_ENV=${property.ex_myenv.value}
export MY_ENV
Type: String
Single-byte alphanumeric characters and the following symbols can only be specified: percent signs (%), at-signs (@), plus symbols (+), hyphens (-), underscores (_), commas (,), and periods (.).
Property deletion
No Value Specified
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.property.env_TZ=JST-9
17
property.log-file-count
Specifies the number of log files to be output by PRF.
This property corresponds to the -PrfLogFileCount option of the PRF cprfstart command.
1 to 32
Property deletion
8
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.property.log-file-count=16
18
property.log-file-size
Specifies in megabytes the largest possible size of log files to be output by PRF.
This property corresponds to the -PrfLogFileSize option of the PRF cprfstart command.
1 to 100
Property deletion
10
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.property.log-file-size=20
19
property.log-shift-time
Specifies the time to shift the log files output by PRF.
This property corresponds to the -PrfLogShiftTime option of the PRF cprfstart command.
HHMMSS(000000 to 235959)
Property deletion
000000
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.property.log-shift-time=121530
20
property.prf-spool
Specifies the output directory for the PRF trace.
Type: String
Property deletion
No Value Specified
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.property.prf-spool=C:\PRFSPOOL\PRF01
21
property.trace-buffer-size
Specifies in kilobytes the buffer size for PRF trace files, to be allocated to shared memory.
This property corresponds to the -PrfTraceBufferSize option of the PRF cprfstart command.
512 to 102400
Property deletion
8192
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.property.trace-buffer-size=16384
22
property.trace-count
Specifies the number of PRF trace files.
This property corresponds to the -PrfTraceCount option of the PRF cprfstart command.
3 to 256
Property deletion
4
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.property.trace-count=8
23
property.trace-file-size
Specifies in kilobytes the maximum possible size of one PRF trace file.
This property corresponds to the -PrfTraceFileSize option of the PRF cprfstart command.
1024 to 1048576
Property deletion
262144
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.property.trace-file-size=16384
24
property.trace-level
Specifies the level of obtaining the PRF trace by using a four-byte hexadecimal number (eight digits). You can add 0x to the beginning, but 0x will be ignored. You can specify multiple values by using commas (,) at the left to separate the level values of index numbers.
This property corresponds to the -PrfTraceLevel option of the PRF cprfstart command.
Four-byte hexadecimal number (eight digits)[,four-byte hexadecimal number (eight digits)...]
Property deletion
0
asadmin set hitachi-prf-configs.hitachi-prf-config.PRF01-config.property.trace-level=0x44445555
- Legend:
-
#: If "Property deletion" is shown in the "Default Value" column, specifying an empty string for the parameter deletes the property itself.
-
Web server relation
- Parameters starting with hitachi-webservers.hitachi-webserver.web-server-name
-
- Legend:
-
#: If "Property deletion" is shown in the "Default Value" column, specifying an empty string for the parameter deletes the property itself.
- Parameters starting with hitachi-webserver-configs.hitachi-webserver-config.web-server-configuration-name
-
If a parameter whose name begins with property. is also defined by Parameters starting with hitachi-webservers.hitachi-webserver.web-server-name, the value defined by Parameters starting with hitachi-webservers.hitachi-webserver.web-server-name has priority.
- Legend:
-
#: If "Property deletion" is shown in the "Default Value" column, specifying an empty string for the parameter deletes the property itself.
Server instance relation
- Parameters starting with servers.server.Java-EE-server-name
-
No.
Parameter name
Description
Range Value
Default Value#
Initial Value
Example
1
hitachi-relations.hitachi-relation-type-ref.hitachi-relation.relation_name.order
Specifies the sequence number of an inter-server relation.
0 to 65535
Cannot be omitted
No Value Specified
asadmin set servers.server.JavaEE01.hitachi-relations.redirect.hitachi-relation.redirect1.order=10
2
hitachi-relations.prf-relation.hitachi-relation.relation_name.property.ex_property
Specifies the name and the value of an extended property to be added to the Java-EE-server PRF relation. The property name must start with ex_.
The added extended property can be used as a replacement character string to be written in server template files for the Java EE server that is the source of the inter-server relation.
Type: String
Property deletion
No Value Specified
asadmin set servers.server.JavaEE01.hitachi-relations.prf-relation.hitachi-relation.prfref1.property.ex_timeout=600
3
hitachi-session-config.server-id
Specifies the server ID that identifies the Java EE server on which load balancing should be performed with Web Server.
The server ID specified in this property will be set to the 33rd and subsequent characters in the session ID.
Type : String
No Default Value
No Value Specified
asadmin set servers.server.JavaEE01.hitachi-session-config.server-id=server1
4
monitoring-service.module-monitoring-levels.hitachi-jvm-memory-extensions
Specifies the monitoring level for Java VM memory extension operation information.
LOW|HIGH|OFF
OFF
HIGH
asadmin set configs.config.JavaEE01-config.monitoring-service.module-monitoring-levels.hitachi-jvm-memory-extensions=OFF
5
property.ex_property
Specifies the name and the value of an extended property to be added to the Java EE server. The property name must start with ex_.
The added extended property can be used as a replacement character string to be written in server template files for the Java EE server.
Type: String
Property deletion
No Value Specified
asadmin set servers.server.JavaEE01.property.ex_timeout=600
6
property.balancer-member-root-id
Specifies the cookie ID to be used to perform redirection from the web server to this server via the cluster.
Type: String
Property deletion
No Value Specified
asadmin set servers.server.JavaEE01.property.balancer-member-root-id=route01
7
property.env_environment_variables_name
Specifies the environment variable to be set when the Java EE server starts. If you want to specify more than one environment variable, you must specify this standard property more than once.
If the specified environment variable value includes ${apserver.home}, it will be replaced by Application Server installation directory.
The environment variable value will not be inherited even if this property value contains a setting such as %PATH%;C:\temp or ${PATH}:/temp, which indicates that the environment variable value should be inherited. If you wish to specify such a value, make sure that you specify it in one of the following:
-
System environment variable of the operating system on the node
-
asenv definition on the node
Type: String
Property deletion
No Value Specified
asadmin set servers.server.JavaEE01.property.env_TZ=JST-9
- Legend:
-
#: If "Property deletion" is shown in the "Default Value" column, specifying an empty string for the parameter deletes the property itself.
-
- Parameters starting with configs.config.configuration-name-of-Java-EE-server
-
No.
Parameter name
Description
Range Value
Default Value#
Initial Value
Example
1
-config.java-config.native-library-path-prefix
Specifies a prefix for the native library path.
Path separator is ":".
After the change of this parameter is the need to restart the server.
Type: String
<empty string>
No Value Specified
asadmin set configs.config.instance1-config.java-config.native-library-path-prefix=D:\usr\nativelib
2
admin-service.jmx-connector.system.port
The network port for JMX.
On UNIX, creating sockets that listen on ports 1 - 1024 requires superuser privileges.
1 to 65535
No Default Value
8686<for DAS>
${JMX_SYSTEM_CONNECTOR_PORT}<for server instace>
asadmin set configs.config.server-config.admin-service.jmx-connector.system.port=8686
3
availability-service.availability-enabled
Used to enable availability for a specific cluster, or for a specific Web, EJB, or JMS container using asadmin set subcommands.
true|false
true
No Value Specified
asadmin set configs.config.JavaEE01-config.availability-service.availability-enabled=true
4
connector-service.shutdown-timeout-in-seconds
According to the Connector specification, while Application Server shuts down, all resource adapters should be stopped. A resource adapter might hang during shutdown, since shutdown is typically a resource intensive operation.
To avoid such a situation, you can set a timeout that aborts resource adapter shutdown if exceeded. The default timeout is 30 seconds per resource adapter module.
To configure this timeout: Use the following asadmin set command: asadmin set server.connector-service.shutdown-timeout-in-seconds="num-secs"
1 to 2147483647
30
No Value Specified
asadmin set configs.config.JavaEE01-config.connector-service.shutdown-timeout-in-seconds=60
5
ejb-container.max-cache-size
Specifies the maximum number of instances that can be cached.
0 to 2147483647
512
2000
asadmin set configs.config.JavaEE01-config.ejb-container.max-cache-size=1000
6
ejb-container.max-pool-size
Specifies a maximum size, a pool can grow to. A value of 0 implies an unbounded pool. Unbounded pools eventually shrink to the steady-pool-size, in steps defined by pool-resize-quantity.
0 to 2147483647
32
24
asadmin set configs.config.JavaEE01-config.ejb-container.max-pool-size=30
7
ejb-container.steady-pool-size
Specifies the number of bean instances normally maintained in pool.
0 to 2147483647
0
24
asadmin set configs.config.JavaEE01-config.ejb-container.steady-pool-size=20
8
group-management-service.group-discovery-timeout-in-millis
Indicates the amount of time (in milliseconds) an instance's GMS module will wait during instance startup for discovering other members of the group.
The group-discovery-timeout-in-millis timeout value should be set to the default or higher. The default is 5000.
1000 to 120000
5000
No Value Specified
asadmin set configs.config.JavaEE01-config.group-management-service.group-discovery-timeout-in-millis=8000
9
hitachi-eheap.httpsession-enabled
Specifies whether to apply explicit memory management to HTTP sessions.
true|false
true
true
asadmin set configs.config.JavaEE01-config.hitachi-eheap.httpsession-enabled=false
10
hitachi-jaxrs-config.connect-timeout
Specifies, in milliseconds, the initial value of jersey.config.client.connectTimeout of client configuration properties provided by Jersey.
Type : Integer
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.hitachi-jaxrs-config.connect-timeout=0
11
hitachi-jaxrs-config.read-timeout
Specifies, in milliseconds, the initial value of jersey.config.client.readTimeout of client configuration properties provided by Jersey.
Type : Integer
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.hitachi-jaxrs-config.read-timeout=0
12
hitachi-jaxws-config.connect-timeout
Specifies, in milliseconds, the initial value of the JAX-WS RI property com.sun.xml.ws.connect.timeout of JAX-WS BindingProvider properties.
Type : Integer
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.hitachi-jaxws-config.connect-timeout=60000
13
hitachi-jaxws-config.request-timeout
Specifies, in milliseconds, the initial value of the JAX-WS RI property com.sun.xml.ws.request.timeout of JAX-WS BindingProvider properties.
Type : Integer
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.hitachi-jaxws-config.request-timeout=300000
14
hitachi-jaxws-config.security-auth-password
Specifies the initial value of javax.xml.ws.security.auth.password of JAX-WS BindingProvider properties.
Type: String
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.hitachi-jaxws-config.security-auth-password=pass
15
hitachi-jaxws-config.security-auth-username
Specifies the initial value of javax.xml.ws.security.auth.username of JAX-WS BindingProvider properties.
Type: String
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.hitachi-jaxws-config.security-auth-username=user
16
hitachi-jaxws-config.session-maintain
Specifies, in milliseconds, the initial value of javax.xml.ws.session.maintain of JAX-WS BindingProvider properties.
true|false
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.hitachi-jaxws-config.session-maintain=true
17
hitachi-jca.connection-auto-close-enabled
Specifies whether to enable or disable automatic closing of connections.
If a connection is obtained through a thread generated with a servlet or JSP, the connection will not close automatically.
If connections obtained through callback methods of servlets and JSP (for example, the init method) or EJB (for example, the ejbCreate or PostConstruct method) are not explicitly closed, the connections might be automatically closed.
true|false
No Default Value
true
asadmin set configs.config.JavaEE01-config.hitachi-jca.connection-auto-close-enabled=true
18
hitachi-manage-info.get-pid-command
Specifies the command to obtain the ID of the process to be executed on the Java EE server. To specify a command, specify the relative path from the template directory for a server type. Do not specify the file extension.
Type: String
Cannot be omitted
bin/getpid-javaee
asadmin set configs.config.JavaEE01-config.hitachi-manage-info.get-pid-command=getpid-javaee
19
hitachi-manage-info.running-watch-interval-in-seconds
Specifies in seconds the interval at which Java EE server operations are verified.
1 to 86400
Cannot be omitted
10
asadmin set configs.config.JavaEE01-config.hitachi-manage-info.running-watch-interval-in-seconds=20
20
hitachi-manage-info.start-timeout-in-seconds
Specifies in seconds the time during which to monitor whether the Java EE server is started. If 0 is specified, the monitoring will not be performed.
0 to 3600
Cannot be omitted
60
asadmin set configs.config.JavaEE01-config.hitachi-manage-info.start-timeout-in-seconds=180
21
hitachi-manage-info.starting-watch-interval-in-seconds
Specifies in seconds the interval for monitoring whether the Java EE server is started.
1 to 86400
Cannot be omitted
1
asadmin set configs.config.JavaEE01-config.hitachi-manage-info.starting-watch-interval-in-seconds=3
22
hitachi-manage-info.starting-watch-start-time-in-seconds
Specifies, in seconds, the time from when a command is executed to start the Java EE server until when verification of operations is started.
0 to 86400
Cannot be omitted
0
asadmin set configs.config.JavaEE01-config.hitachi-manage-info.starting-watch-start-time-in-seconds=60
23
hitachi-manage-info.stop-timeout-in-seconds
Specifies in seconds the time during which to monitor whether the Java EE server is stopped. If 0 is specified, the monitoring will not be performed.
0 to 1800
Cannot be omitted
60
asadmin set configs.config.JavaEE01-config.hitachi-manage-info.stop-timeout-in-seconds=180
24
hitachi-manage-info.stopping-watch-interval-in-seconds
Specifies in seconds the interval for monitoring whether the Java EE server is stopped.
1 to 86400
Cannot be omitted
1
asadmin set configs.config.JavaEE01-config.hitachi-manage-info.stopping-watch-interval-in-seconds=3
25
hitachi-manage-info.template-path
Specifies the absolute path of the server template for the Java EE server.
An existing directory path
Cannot be omitted
domain-root-directory/domain-name/server_templates/server-type
asadmin set configs.config.JavaEE01-config.hitachi-manage-info.template-path=C:\temp\javaee
26
hitachi-monitoring.hitachi-statistics-files.base-time
Specifies the base time to switch operation information files. To specify the base time, specify how many minutes have elapsed since 00:00:00.
To set the base time to h:m, specify the minutes calculated by the following formula: h x 60 + m.
An integer from 0 to 1439 (from 0 to 23 hours and 59 minutes)
0
0
asadmin set configs.config.JavaEE01-config.hitachi-monitoring.hitachi-statistics-files.base-time=360
27
hitachi-monitoring.hitachi-statistics-files.hitachi-output-enabled.jvm-memory-extensions
Specifies whether to accumulate in files the Java VM memory extension operation information collected by the operation information collection function of Java EE Server.
true|false
true
true
asadmin set configs.config.JavaEE01-config.hitachi-monitoring.hitachi-statistics-files.hitachi-output-enabled.jvm-memory-extensions=true
28
hitachi-monitoring.hitachi-statistics-files.interval
Specifies in seconds the accumulation interval for operation information files.
An integer from 1 to 86400 (from one second to one day)
60
60
asadmin set configs.config.JavaEE01-config.hitachi-monitoring.hitachi-statistics-files.interval=300
29
hitachi-monitoring.hitachi-statistics-files.output-dir
Specify the absolute path of the output destination directory if you want to change the output destination of operation information files.
If the same output destination directory is specified for more than one server instance, the multiple server instances might output operation information to the same file. Therefore, specify different output directories for different server instance.
Single-byte alphanumeric characters, hyphens (-), underscores (_), colons (:), backslash (\), and forward slashes (/)
<empty string>
<empty string>
asadmin set configs.config.JavaEE01-config.hitachi-monitoring.hitachi-statistics-files.output-dir=D:/monitoring_dir
30
hitachi-monitoring.hitachi-statistics-files.num
Specifies the number of operation information files.
An integer from 2 to 168
8
8
asadmin set configs.config.JavaEE01-config.hitachi-monitoring.hitachi-statistics-files.num=14
31
hitachi-monitoring.hitachi-statistics-files.period
Specifies in hours the time for switching operation information files.
An integer from 1 to 744 (from 1 hour to 31 days)
24(1 day)
24(1 day)
asadmin set configs.config.JavaEE01-config.hitachi-monitoring.hitachi-statistics-files.period=1
32
http-service.virtual-server.id.property.errorReportValve.value
Specifies a fully qualified class name of a custom valve that produces default error pages for applications on this virtual server.
Specify org.apache.catalina.valves.ErrorReportValve to enable the default error page mechanism for this virtual server. Specify an empty string to disable the default error page mechanism for this virtual server.
-
org.apache.catalina.valves.ErrorReportValve
-
<empty string>
org.apache.catalina.valves.ErrorReportValve
<empty string>
-
To enable the default error page mechanism for the virtual server:
asadmin set configs.config.JavaEE01-config.http-service.virtual-server.server.property.errorReportValve.value=org.apache.catalina.valves.ErrorReportValve
-
To disable the default error page mechanism for the virtual server:
asadmin set configs.config.JavaEE01-config.http-service.virtual-server.server.property.errorReportValve.value=""
33
iiop-service.iiop-listener.id.port
This property indicates the IIOP port numbers.
Port number for the listener. Legal values are 1 - 65535.
On UNIX, creating sockets that listen on ports 1 - 1024 requires super user privileges.
1 to 65535
1072
3700 <for {name="server-config", id="orb-listener-1"}>
${IIOP_LISTENER_PORT}<for server instace>
asadmin set configs.config.JavaEE01-config.iiop-service.iiop-listener.orb-listener-1.port=9999
34
jms-service.jms-host.JMS host name.port
The network port for JMS Provider.
On UNIX, creating sockets that listen on ports 1 - 1024 requires superuser privileges.
1 to 65535
No Default Value
${JMS_PROVIDER_PORT}
asadmin set configs.config.server-config.jms-service.jms-host.default_JMS_host.port=7677
35
jms-service.reconnect-interval-in-seconds
You can change the default values for this timeout.
The number of seconds between reconnect attempts. This interval applies for attempts on each JMS host in the AddressList and for successive addresses in the list. If it is too short, this time interval does not give a JMS host time to recover. If it is too long, the reconnect might represent an unacceptable delay.
1 to 2147483647
5
No Value Specified
asadmin set configs.config.JavaEE01-config.jms-service.reconnect-interval-in-seconds=5
36
mdb-container.max-pool-size
Specifies the maximum number of connections that can be created to satisfy client requests.
0 to 2147483647
32
No Value Specified
asadmin set configs.config.JavaEE01-config.mdb-container.max-pool-size=20
37
monitoring-service.module-monitoring-levels.http-service
Enables and Disables monitoring for the HTTP service by setting the monitoring level.
Enables monitoring for the HTTP service by setting the monitoring level to HIGH/LOW. Disables monitoring for the HTTP service by setting the monitoring level to OFF.
-
OFF: No monitoring, no impact on performance.
-
LOW: Simple statistics, such as create count, byte count, and so on.
-
HIGH: Simple statistics plus method statistics, such as method count, duration, and so on.
OFF|LOW|HIGH
OFF
HIGH
asadmin set configs.config.JavaEE1-config.monitoring-service.module-monitoring-levels.http-service=HIGH
38
monitoring-service.module-monitoring-levels.jdbc-connection-pool
Enables and Disables monitoring for the JDBC connection pool by setting the monitoring level.
Enables monitoring for the JDBC connection pool by setting the monitoring level to HIGH/LOW. Disables monitoring for the JDBC connection pool by setting the monitoring level to OFF.
-
OFF: No monitoring, no impact on performance.
-
LOW: Simple statistics, such as create count, byte count, and so on.
-
HIGH: Simple statistics plus method statistics, such as method count, duration, and so on.
OFF|LOW|HIGH
OFF
HIGH
asadmin set configs.config.JavaEE1-config.monitoring-service.module-monitoring-levels.jdbc-connection-pool=HIGH
39
monitoring-service.module-monitoring-levels.web-container
Enables and Disables monitoring for the web container by setting the monitoring level.
Enables monitoring for the web container by setting the monitoring level to HIGH/LOW. Disables monitoring for the web container by setting the monitoring level to OFF.
-
OFF: No monitoring, no impact on performance.
-
LOW: Simple statistics, such as create count, byte count, and so on.
-
HIGH: Simple statistics plus method statistics, such as method count, duration, and so on.
OFF|LOW|HIGH
OFF
HIGH
asadmin set configs.config.JavaEE1-config.monitoring-service.module-monitoring-levels.web-container=HIGH
40
network-config.network-listeners.network-listener.name.enabled
Determines whether the listener is active.
true|false
true
No Value Specified
asadmin set configs.config.server-config.network-config.network-listeners.network-listener.http-listener-1.enabled=false
41
network-config.network-listeners.network-listener.name.port
The network port for network listener.
On UNIX, creating sockets that listen on ports 1 - 1024 requires superuser privileges.
1 to 65535
No Default Value
8080<for http-listener-1 of DAS>
8181<for http-listener-2 of DAS>
${HTTP_LISTENER_PORT}<for http-listener-1 of server instance>
${HTTP_SSL_LISTENER_PORT}<for http-listener-2 of server instance>
asadmin set configs.config.server-config.network-config.network-listeners.network-listener.http-listener-1.port=8080
42
network-config.protocols.protocol.admin-listener.http.request-timeout-seconds
Specifies time in seconds after which the request times out.
Request timeout occurs when request processing time (from the start of the request processing to completion) exceeds this parameter.
If 0 is specified, a timeout does not occur.
We do not recommend specifying 0 (timeout disabled) for the timeout value. If you specify 0 and the processing time for an admin-listener request becomes long, the command processing might occupy the threads for processing the asadmin subcommand and user requests.
0 to 2147483647
900
900
asadmin set configs.config.server-config.network-config.protocols.protocol.admin-listener.http.request-timeout-seconds=600
43
network-config.protocols.protocol.http-listener-1.http.max-connections
Specifies the maximum number of HTTP requests that can be pipelined until the connection is closed by the server.
Set this property to 1 to disable HTTP/1.0 keep-alive, as well as HTTP/1.1 keep-alive and pipelining.
1 to 2147483647
256
No Value Specified
asadmin set configs.config.server-config.network-config.protocols.protocol.http-listener-1.http.max-connections=120
44
network-config.protocols.protocol.http-listener-1.http.request-timeout-seconds
Specifies time in seconds after which the request times out.
Request timeout occurs when request processing time (from the start of the request processing to completion) exceeds this parameter.
If 0 is specified, a timeout does not occur.
0 to 2147483647
900
190
asadmin set configs.config.JavaEE01-config.network-config.protocols.protocol.http-listener-1.http.request-timeout-seconds=600
45
network-config.protocols.protocol.http-listener-1.http.timeout-seconds
Specifies max time a connection can be deemed as idle and kept in the keep-alive state.
A value of less than 0 means keep alive connections are kept open indefinitely.
-1 to 2147483647
30
-1
asadmin set configs.config.JavaEE01-config.network-config.protocols.protocol.http-listener-1.http.timeout-seconds=20
46
network-config.protocols.protocol.sec-admin-listener.http.request-timeout-seconds
Specifies time in seconds after which the request times out.
Request timeout occurs when request processing time (from the start of the request processing to completion) exceeds this parameter.
If 0 is specified, a timeout does not occur.
We do not recommend specifying 0 (timeout disabled) for the timeout value. If you specify 0 and the processing time for an admin-listener request becomes long, the command processing might occupy the threads for processing the asadmin subcommand and user requests.
0 to 2147483647
900
900
asadmin set configs.config.instance1-config.network-config.protocols.protocol.sec-admin-listener.http.request-timeout-seconds=600
47
property.ex_property
Specifies the name and the value of an extended property to be added to the Java EE server. The property name must start with ex_.
The added extended property can be used as a replacement character string to be written in server template files for the Java EE server.
Type: String
Property deletion
No Value Specified
asadmin set configs.config.JavaEE01-config.property.ex_timeout=600
48
property.balancer-member-root-id
Specifies the cookie ID to be used to perform redirection from the web server to this server via the cluster.
Type: String
Property deletion
No Value Specified
asadmin set configs.config.JavaEE01-config.property.balancer-member-root-id=route01
49
property.env_environment_variables_name
Specifies the environment variable to be set when the Java EE server starts. If you want to specify more than one environment variable, you must specify this standard property more than once.
If the specified environment variable value includes ${apserver.home}, it will be replaced by Application Server installation directory.
The environment variable value will not be inherited even if this property value contains a setting such as %PATH%;C:\temp or ${PATH}:/temp, which indicates that the environment variable value should be inherited. If you wish to specify such a value, make sure that you specify it in one of the following:
-
System environment variable of the operating system on the node
-
asenv definition on the node
Type: String
Property deletion
No Value Specified
asadmin set configs.config.JavaEE01-config.property.env_TZ=JST-9
50
security-service.activate-default-principal-to-role-mapping
Applies a default principal for role mapping to any application that does not have an application-specific mapping defined. Every role is mapped to an instance of a java.security.Principal implementation class defined by mapped-principal-class. This class has the same name as the role.
true|false
false
No Value Specified
asadmin set configs.config.JavaEE01-config.security-service.activate-default-principal-to-role-mapping=true
51
security-service.default-principal
Used as the identity of the default security context when necessary and when no principal is provided. This attribute need not be set for normal server operation.
Type: String
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.security-service.default-principal=dsmith
52
security-service.default-principal-password
The password of the default principal. This attribute need not be set for normal server operation.
Type: String
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.security-service.default-principal-password=secret
53
security-service.mapped-principal-class
Customizes the java.security.Principal implementation class used when activate-default-principal-to-role-mapping is set to true.
Type: String
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.security-service.mapped-principal-class=CustomPrincipalImplClass
54
thread-pools.thread-pool.name.idle-thread-timeout-seconds
Specifies the amount of time in seconds after which idle threads are removed from the pool.
1 to 2147483647
900
No Value Specified
asadmin set configs.config.instance1-config.thread-pools.thread-pool.thread-pool-1.idle-thread-timeout-seconds=1000
55
thread-pools.thread-pool.name.max-queue-size
The maxim number of tasks, which could be queued on the thread pool. -1 disables any maximum checks.
-
-1
-
1 to 2147483647
4096
80 <for http-thread-pool>
asadmin set configs.config.JavaEE01-config.thread-pools.thread-pool.thread-pool-1.max-queue-size=1000
56
thread-pools.thread-pool.name.max-thread-pool-size
Specifies the maximum number of threads the pool can contain. To optimize this thread pool for use with an iiop-listener, set this value to 200.
1 to 2147483647
5
200 <for thread-pool-1>
24 <for http-thread-pool>
asadmin set configs.config.JavaEE01-config.thread-pools.thread-pool.http-thread-pool.max-thread-pool-size=8
57
thread-pools.thread-pool.name.min-thread-pool-size
Minimum number of threads in the thread pool servicing requests in this queue. These are created up front when this thread pool is instantiated
1 to 2147483647
2
24 <for http-thread-pool>
asadmin set configs.config.JavaEE01-config.thread-pools.thread-pool.thread-pool-1.min-thread-pool-size=20
58
transaction-service.automatic-recovery
Pending transactions are completed upon server startup if automatic-recovery is set to true.
true|false
false
true
asadmin set configs.config.JavaEE01-config.transaction-service.automatic-recovery=false
59
transaction-service.heuristic-decision
If the outcome of a distributed transaction cannot be determined because other participants are unreachable, this property determines the outcome.
commit|rollback
rollback
No Value Specified
asadmin set configs.config.JavaEE01-config.transaction-service.heuristic-decision=rollback
60
transaction-service.keypoint-interval
Specifies the number of transactions between keypoint operations in the log. Keypoint operations reduce the size of the transaction log file by compressing it.
A larger value for this attribute results in a larger transaction log file, but fewer keypoint operations and potentially better performance. A smaller value results in smaller log files, but slightly reduced performance due to the greater frequency of keypoint operations.
0 to 2147483647
65536
No Value Specified
asadmin set configs.config.JavaEE01-config.transaction-service.keypoint-interval=2048
61
transaction-service.property.db-logging-resource
Used to configuring the transaction service. The db-logging-resource property does not have a default value. It is unset by default.
Type: String
No Default Value
No Value Specified
asadmin set configs.config.JavaEE01-config.transaction-service.property.db-logging-resource="jdbc/TxnDS"
62
transaction-service.property.oracle-xa-recovery-workaround
The XAResource.commit method also has some issues. To disable Java EE Server workaround, set the oracle-xa-recovery-workaround property value to false.
true|false
true
No Value Specified
asadmin set configs.config.JavaEE01-config.transaction-service.property.oracle-xa-recovery-workaround=true
63
transaction-service.property.pending-txn-cleanup-interval
Used to configuring the transaction service. The pending-txn-cleanup-interval default of -1 means the periodic recovery thread doesn't run. The units are seconds.
Periodic automatic recovery is performed by a background thread if the pending-txn-cleanup-interval property is set to a positive value.
-
-1
-
1 to 2147483647
No Default Value <60, if this property is present but value is empty>
No Value Specified
asadmin set configs.config.JavaEE01-config.transaction-service.property.pending-txn-cleanup-interval=-1
64
transaction-service.property.use-last-agent-optimization
Used to configuring the transaction service. The use-last-agent-optimization property is set to true by default.
If true, enables last agent optimization, which improves the throughput of transactions. If one non-XA resource is used with XA resources in the same transaction, the non XA resource is the last agent.
true|false
true
No Value Specified
asadmin set configs.config.JavaEE01-config.transaction-service.property.use-last-agent-optimization=true
65
transaction-service.property.wait-time-before-recovery-insec
Used to configuring the transaction service.
1 to 2147483647
60
No Value Specified
asadmin set configs.config.JavaEE01-config.transaction-service.property.wait-time-before-recovery-insec=60
66
transaction-service.property.xaresource-txn-timeout
Used to configuring the transaction service. The xaresource-txn-timeout default of 0 means there is no timeout. The units are seconds.
Changes the XAResource timeout. In some cases, the XAResource default timeout can cause transactions to be aborted, so it is desirable to change it.
0 to 2147483647
120 <depends on XAResource>
180
asadmin set configs.config.JavaEE01-config.transaction-service.property.xaresource-txn-timeout=0
67
transaction-service.retry-timeout-in-seconds
Determines the retry time in the following scenarios:
-
At the transaction recovery time, if resources are unreachable.
-
If there are any transient exceptions in the second phase of a two phase commit protocol.
-1 specifies infinite retries. A value of 0 (zero) specifies no retries.
A positive value indicates the time after which a retry is attempted.
-1 to 2147483647
600
No Value Specified
asadmin set configs.config.JavaEE01-config.transaction-service.retry-timeout-in-seconds=600
68
transaction-service.timeout-in-seconds
Specifies the amount of time after which the transaction is aborted. If set to 0, the transaction never times out.
0 to 2147483647
0
180
asadmin set configs.config.JavaEE01-config.transaction-service.timeout-in-seconds=0
69
web-container.session-config.session-manager.manager-properties.max-sessions
Specifies the maximum number of sessions that can be in cache, or -1 for no limit.
After this, an attempt to create a new session causes an IllegalStateException to be thrown.
-
-1
-
1 to 2147483647
-1
No Value Specified
asadmin set configs.config.instance1-config.web-container.session-config.session-manager.manager-properties.max-sessions=10
70
web-container.session-config.session-properties.timeout-in-seconds
Specifies the value in seconds after which session should be timed out.
0 to 2147483647
1800
7200
asadmin set configs.config.JavaEE01-config.web-container.session-config.session-properties.timeout-in-seconds=5000
- Legend:
-
#: If "Property deletion" is shown in the "Default Value" column, specifying an empty string for the parameter deletes the property itself.
-
Administration relation
- Administration relation
-
- Legend:
-
#: If "Property deletion" is shown in the "Default Value" column, specifying an empty string for the parameter deletes the property itself.