3.22.36 SMI-Sプロバイダのスタートアップ設定に関するトラブルシューティング
SMI-Sプロバイダのスタートアップ設定を実行したときにエラーが発生した場合は、エラーメッセージが表示されます。
表示されるエラーメッセージと対処方法について説明します。
エラーメッセージ |
原因と対策 |
---|---|
Both or either of the two parameters is not specified. Specify the serial number of the storage system and the startup type as parameters. |
パラメータが不足しています。 パラメータとして、ストレージシステムのシリアル番号とスタートアップの種類を指定してください。 |
The storage system with the specified serial number is not added to the Storage Device List. Verify the specified serial number. |
指定されたシリアル番号のストレージシステムは、Storage Device Listに登録されていません。 指定したシリアル番号を確認してください。 |
The specified startup type is not valid. Specify enable or disable for the startup type. |
指定されたスタートアップの種類が正しくありません。 スタートアップの種類には、enableまたはdisableを指定してください。 |
An internal error occurred. If this problem persists, contact customer support provided in the manual. |
内部エラーが発生しました。 この問題が再発するときは、マニュアルに記載する問い合わせ先に連絡してください。 |