2.4.9 Thin ImageとDynamic Provisioningの併用
1つのストレージシステムで、Thin Image、Dynamic Provisioningを同時に使用する場合は、次の点に注意してください。
-
容量削減機能はプライマリボリュームおよびカスケードペアまたはクローン属性のペアのセカンダリボリュームに設定できますが、動作するのはクローン属性のペアだけです。また、重複排除用システムデータボリュームはプライマリボリュームおよびセカンダリボリュームとして使用できません。
-
容量削減機能によって圧縮または重複排除されたコピー元のボリュームのデータは、圧縮または重複排除を解消してから、コピー先のボリュームへコピーされます。また、容量削減機能は、コピーしたデータに対してすぐには実行されません。Thin Imageペアを作成したり再同期したりする前に、コピー先のボリュームの空き容量が、コピー元のボリュームに格納されている容量削減前の使用容量よりも多いことを確認してください。詳細は、システム構築ガイドを参照してください。
-
容量削減機能を使用したボリュームを使用してThin Imageペアを作成すると、圧縮または重複排除されたデータをコピーするため、コピーの性能やホストのI/O性能が低下する場合があります。
-
容量削減機能を使用すると、管理情報がプールに格納されるため、プライマリボリュームとセカンダリボリュームで、ページの使用量やライセンス容量に差があることがあります。
-
Thin ImageペアのプライマリボリュームまたはセカンダリボリュームにDynamic Provisioningの仮想ボリュームを指定する場合、Dynamic Provisioningの仮想ボリュームが容量を拡張している途中ではペアを作成できません。
-
Thin Imageペアのプライマリボリュームまたはセカンダリボリュームとして、Dynamic Provisioningボリュームの最大ボリュームサイズまで使用できます。Dynamic Provisioningボリュームの最大ボリュームサイズについては、システム構築ガイドを参照してください。
-
Thin Imageペアのプライマリボリュームまたはセカンダリボリュームを指定して、Storage NavigatorまたはRAID Managerからゼロデータページ破棄を実施する場合の実行可否については、システム構築ガイドを参照してください。
-
WriteSame/Unmapコマンドまたはリバランスによるゼロデータページ破棄の処理中にThin Imageのペア作成を実施すると、ゼロデータページ破棄が中断されます。
-
Thin Imageペアのプライマリボリュームまたはセカンダリボリュームに対してWriteSame/Unmapコマンドが発行された場合、WriteSame/Unmapコマンドによるゼロデータページ破棄は実施されません。
-
Thin Imageの仮想ボリューム(プロビジョニングタイプが[Snapshot]の仮想ボリューム)に対してUnmapコマンドが発行された場合、Unmapコマンドが異常終了します。
-
システムオプションモード905がONの状態で発行されたUnmapコマンドの処理中にThin Imageのペア作成を実施すると、ペア作成が失敗する場合があります。ペア作成が失敗した場合は、しばらく待ってから再度操作してください。再度操作してもペア作成を実施できない場合は、システムオプションモード905をOFFにしてから再度操作してください。