Compute Systems Manager メッセージ

[目次][前へ][次へ]


2.7 KASV70000~KASV79999

Compute Systems Managerに関するメッセージ(KASV70000~KASV79999)を次の表に示します。

表2-7 KASV70000~KASV79999:Compute Systems Managerに関するメッセージ

メッセージID メッセージテキスト 説明
KASV70305-I Hitachi Command Suite services must stop during the installation.
Continue? (y/n):
要因
-
対処
-
KASV70306-I Hitachi Command Suite services must stop during the removal.
Continue? (y/n):
要因
-
対処
-
KASV70309-I Installation was canceled. 要因
-
対処
-
KASV70310-I Removal was canceled. 要因
-
対処
-
KASV71001-W An attempt to stop the Hitachi Command Suite services failed. Stopping the services may be delayed.
Type y to retry stopping the services, or n to cancel.
(y/n):
要因
システムが稼働中のため,サービスの停止が遅延しているおそれがあります。
対処
Hitachi Command Suite製品のサービスを停止する場合は"y",中止する場合は"n"を入力してください。
KASV71009-W The installer cannot start because there is not enough temporary space. Ensure that the system meets the free space requirement.
Directory: directory, Required: required-spaceMB, Available: free-spaceMB
要因
起動に必要な一時使用領域が不足しています。
対処
リリースノートを参照して,必要な容量を確保してください。
KASV71010-W The removal cannot start because there is not enough temporary space.
Directory: directory, Required: required-spaceMB, Available: free-spaceMB
要因
起動に必要な一時使用領域が不足しています。
対処
リリースノートを参照して,必要な容量を確保してください。
KASV71201-W The entered value is invalid. Type y to re-enter or n to cancel.
(y/n):
要因
入力した値が誤っています。
対処
再入力する場合は"y",中止する場合は"n"を入力してください。
KASV71202-W The entered value is invalid. Type y to renter ,n to cancel, or e to edit.
(y/n/e):
要因
入力した値が誤っています。
対処
再入力する場合は"y",中止する場合は"n",編集する場合は"e"を入力してください。
KASV71203-W The entered value is invalid. Return to the setting information screen. 要因
入力した値が誤っています。
対処
-
KASV71204-W An Invalid value was entered 3 times in row. Returning to the setting information screen. 要因
誤った値の入力が3回続きました。
対処
-
KASV71206-W The entered value is invalid. Type i to ignore or c to edit.
(i/c):
要因
入力した値が誤っています。
対処
続行する場合は"i",キャンセルする場合は"c"を入力してください。
KASV71207-W The entered value is invalid. Type r to re-check, i to ignore, or c to cancel.
(r/i/c):
要因
入力した値は使用できません。
対処
再チェックする場合は"r",入力した値で続行する場合は"i",キャンセルする場合は"c"を入力してください。
KASV71208-W The entered port number is invalid. Type e to re-enter or n to cancel.
(e/n):
要因
入力した数値が1から65535の範囲ではありません。
対処
再入力する場合は"e",インストールを中止する場合は"n"を入力してください。
KASV71209-W The entered port number is invalid. Enter a value between 1 and 65535. 要因
入力した数値が1から65535の範囲ではありません。
対処
1から65535の範囲の数値を指定してください。
KASV72006-E The specified directory cannot be used as the installation directory.
Specify another directory.
Note that any of the following directories cannot be specified:
- /usr
- /usr/local
- /var
- The root directory (/)
要因
入力したディレクトリは,インストール先に指定できません。
対処
次のディレクトリは指定できません。それ以外のディレクトリを入力してください。
/usr
/usr/local
/var
ルートディレクトリ(/)
KASV72008-E The database file path contains an invalid character.
Specify a database file path using the following characters:
A-Z a-z 0-9 _ /
要因
データベースの格納先として指定したパスに使用できない文字が含まれています。
対処
データベースファイルの格納先として指定するパスは,次の文字で指定してください。
AZ az 09 . _ /
KASV72010-E The installation path contains an invalid character.
Specify an installation path using the following characters:
A-Z a-z 0-9 _ /
要因
インストール先として指定したパスに使用できない文字が含まれています。
対処
インストール先として指定するパスは,次の文字で指定してください。
AZ az 09 _ /
KASV72023-E The backup file path contains an invalid character.
Specify a backup file path using the following characters:
A-Z a-z 0-9 _ /
要因
バックアップファイルの格納先として指定したパスに使用できない文字が含まれています。
対処
バックアップファイルの格納先として指定するパスは,次の文字で指定してください。
A-Z a-z 0-9 _ /
KASV72024-E The following kernel parameters are smaller than the minimum requirement.
Setting Information
Action to take
要因
カーネルパラメーターが,下限値より小さいです。
対処
メッセージ内の設定手順を参照して,カーネルパラメーターを設定し直してください。
KASV72025-E The following shell limits are smaller than the minimum requirement.
Setting Information
Action to take
要因
limit値が,下限値より小さいです。
対処
メッセージ内の設定手順を参照して,limit値を設定し直してください。
KASV72026-E The mount path contains an invalid character.
Specify a mount path using the following characters:
A-Z a-z 0-9 _ /
要因
マウントパスに使用できない文字が含まれています。
対処
マウントパスは,次の文字で指定してください。
AZ az 09 _ /
KASV72027-E A symbolic link is included in the installation destination path:
Path
要因
-
対処
インストール先のパスを変更してください。
KASV72101-E A non-root user cannot perform an installation. Log in as root, and then start the installer. 要因
root以外のユーザーはインストールできません。
対処
rootでログインし直してから,インストールしてください。
KASV72102-E A non-root user cannot perform a removal. Log in as root, and then restart the removal program. 要因
root以外のユーザーはアンインストールできません。
対処
rootでログインし直してから,アンインストールしてください。
KASV72103-E Hitachi Command Suite cannot be installed on this OS version. Refer to the Release Note to verify the supported OS versions for the Hitachi Command Suite. 要因
このOSのバージョンには,Hitachi Compute Systems Managerをインストールできません。
対処
リリースノートを参照して,Hitachi Compute Systems ManagerがサポートするOSのバージョンを確認してください。
KASV72104-E This installer is dedicated to OS name or architecture name. The OS or architecture of the installation target is not supported. Refer to the Release Note to verify the supported OS and architecture for the Hitachi Command Suite. 要因
実行したインストーラは,インストール先のOSまたはアーキテクチャに対応していません。
対処
リリースノートを参照して,Hitachi Compute Systems ManagerがサポートするOSとアーキテクチャを確認してください。
KASV72106-E There is no installed JDK that meets the software requirement of the Hitachi Command Suite.
Install the required JDK version.
要因
Hitachi Command Suiteが前提とするJDKがインストールされていません。
対処
リリースノートを参照して,必要なJDKをインストールしてください。
KASV72107-E A file in the installation media cannot run.
The media might have been mounted with the mount command noexec option.
Mount the media again without using the noexec option.
要因
インストールメディアをマウントしたときに,mountコマンドのnoexecオプションが指定されたと考えられます。
対処
noexecオプションを指定しないで再度マウントしてください。
KASV72108-E A file in the installation media cannot run.
The installation media may be damaged.
To determine the cause and resolve the problem, a detailed investigation is required. Collect the relevant maintenance information, and then contact customer support.
要因
インストールメディアが壊れているおそれがあります。
対処
原因究明と問題の解決には,詳細な調査が必要です。
障害情報を収集し,障害対応窓口に連絡してください。
KASV72109-E File (file name), required for installation, cannot be read.
The cause might be one of the following:
- The files on the installation media are damaged.
- The mount point contains a invalid character other than one-byte alphanumeric characters or "_".
Verify that the mount point does not contain invalid characters. If the problem still persists, a detailed investigation is required. Collect the relevant maintenance information, and then contact customer support.
要因
インストールに必要なファイルを読み込めません。
次のどちらかの要因が考えられます。
  • インストールメディアが壊れている。
  • マウントポイントに半角英数字および"_"以外の文字が使用されている。
対処
マウントポイントに半角英数字および"_"以外の文字が使用されてないか確認してください。
それでも解決しない場合,原因の究明と問題の解決には,詳細な調査が必要です。障害情報を収集し,障害対応窓口に連絡してください。
KASV72111-E /usr/bin/perl is not found. Install the Perl package. 要因
/usr/bin/perlがありません。
対処
Perlパッケージをインストールしてください。
KASV72112-E File "hinstsetup.tar", required for installation, cannot be read.
The cause might be one of the following:
- The files in the installation media are damaged.
- The mount point contains a invalid character other than one-byte alphanumeric characters or "_".
Verify that the mount point contains invalid characters. If the problem persists, a detailed investigation is required. Collect the relevant maintenance information, and then contact customer support.
要因
インストールに必要なファイルを読み込めません。
次のどちらかの要因が考えられます。
  • インストールメディアが壊れている。
  • マウントポイントに半角英数字および"_"以外の文字が使用されている。
対処
マウントポイントに半角英数字および"_"以外の文字が使用されてないか確認してください。
それでも解決しない場合,原因の究明と問題の解決には,詳細な調査が必要です。障害情報を収集し,障害対応窓口に連絡してください。
KASV72114-E Installation cannot run because a removal of Compute Systems Manager is already running.
Complete the removal, and then perform installation again.
要因
Compute Systems Managerのアンインストールが実行中のため,インストールを中止します。
対処
Compute Systems Managerのアンインストールが完了してから,インストールを再実行してください。
KASV72115-E Another instance of HCSM installer is already running.
Complete the current installation, and then run the installation again.
要因
Compute Systems Managerのインストールがすでに実行中です。
対処
実行中のCompute Systems Managerのインストールが完了してから,インストールを再実行してください。
KASV72116-E A removal cannnot run in the current directory Current directory.
Change the current directory to /root, and then start the removal again.
要因
カレントディレクトリが/rootではありません。
対処
カレントディレクトリを/rootに移動してから,アンインストールを再実行してください。
KASV72117-E Another removal of HCSM installer is already running. 要因
Compute Systems Managerのアンインストールがすでに実行中です。
対処
-
KASV72118-E Removal cannot run because an installation of Compute Systems Manager is already running.
Complete the installation, and then run the removal again.
要因
Compute Systems Managerのインストールが実行中のため,アンインストールを中止します。
対処
Compute Systems Managerのインストールが完了してから,アンインストールを再実行してください。
KASV72119-E Installation will be canceled because the /tmp directory is not found. Create the /tmp directory, and then start the installation again. 要因
/tmpディレクトリがありません。
対処
/tmpディレクトリを作成してから,インストールを再実行してください。
KASV72120-E Removal will be canceled because the /tmp directory is not found. Create the /tmp directory, and then start the removal again. 要因
/tmpディレクトリがありません。
対処
/tmpディレクトリを作成してから,アンインストールを再実行してください。
KASV72309-E The HiRDB service cannot be started.
A detailed investigation is required. Collect the relevant maintenance information, and then contact customer support.
要因
HiRDBサービスの開始に失敗しました。
対処
原因究明と問題の解決には,詳細な調査が必要です。障害情報を収集し,障害対応窓口に連絡してください。
KASV72316-E An attempt to execute the command-name command failed. A detailed investigation is required. Collect the relevant maintenance information, and then contact customer support. 要因
コマンドの実行に失敗しました。
対処
原因究明と問題の解決には,詳細な調査が必要です。障害情報を収集し,障害対応窓口に連絡してください。

[目次] [前へ] [次へ]


All Rights Reserved. Copyright© 2014, 2016, Hitachi, Ltd.