Hitachi

JP1 Version 12 JP1/SNMP System Observer Description, Operator's Guide and Reference


F.3 MIB objects that are acquired when resources are collected

This appendix describes the collection-target resources of SNMP agents and the MIB objects obtained during resource collection for each resource group. This appendix also describes the collection-target resources of the SSO-Ex resource category and the MIB objects obtained during resource collection for each resource group.

Note that for resources for which the MIB objects to be obtained include the increment per collection interval ([Figure]), values are not obtained for the first collection because calculation using an increment requires the previous value. For such resources, therefore, collected data can be saved and the resource status change event can be issued after at least one collection interval passes (from the second collection and thereafter).

Organization of this subsection

(1) Computer group

The following table lists the resources of the computer group and the MIB objects obtained during resource collection.

Table F‒10: MIB objects to be obtained (Computer group)

Resource

Subresource

MIB object acquired

Computer Summary

Host Name

mib2.1.5

System Up-Time

#21

System Location

mib2.1.6

System Contact

mib2.1.4

Operating System Summary

OS Name

mib2.1.1

OS Version

mib2.1.1

System Description

mib2.1.1

Process Summary

PID

hp.2.3.1.4.2.1.1

PPID

hp.2.3.1.4.2.1.4

UID

hp.2.3.1.4.2.1.3

Priority

hp.2.3.1.4.2.1.12

User Name

hp.2.3.1.4.2.1.30

User CPU

hp.2.3.1.4.2.1.15

System CPU

hp.2.3.1.4.2.1.16

Start Command

hp.2.3.1.4.2.1.22

Status

hp.2.3.1.4.2.1.19

Data Size

hp.2.3.1.4.2.1.5

Text Size

hp.2.3.1.4.2.1.6

Stack Size

hp.2.3.1.4.2.1.7

Nice

hp.2.3.1.4.2.1.8

TTY Major

hp.2.3.1.4.2.1.9

TTY Minor

hp.2.3.1.4.2.1.10

Group ID

hp.2.3.1.4.2.1.11

Process Address

hp.2.3.1.4.2.1.13

CPU Utilization

hp.2.3.1.4.2.1.14

Up-Time

hp.2.3.1.4.2.1.17

Process Flag

hp.2.3.1.4.2.1.18

Sleep Address

hp.2.3.1.4.2.1.20

Last Processor

hp.2.3.1.4.2.1.21

In-Core Time

hp.2.3.1.4.2.1.23

Time Slice CPU

hp.2.3.1.4.2.1.24

Total CPU

hp.2.3.1.4.2.1.25

FSS Group ID

hp.2.3.1.4.2.1.26

In-Core CPU Utilization

#8

In-Core Pages

hp.2.3.1.4.2.1.28

SUID

hp.2.3.1.4.2.1.29

Job Summary

Job Name

hitachi.5.7.2.14.2.1.2

Jobstep Name

hitachi.5.7.2.14.2.1.3

Used CPU

hitachi.5.7.2.14.2.1.4

Unused CPU

hitachi.5.7.2.14.2.1.5

Wait Utilization

hitachi.5.7.2.14.2.1.6

Swap Out Utilization

hitachi.5.7.2.14.2.1.7

Low Priority

hitachi.5.7.2.14.2.1.8

High Priority

hitachi.5.7.2.14.2.1.9

Page In

hitachi.5.7.2.14.2.1.19

Page Out

hitachi.5.7.2.14.2.1.20

Page Reclaim

hitachi.5.7.2.14.2.1.21

CPU Load Average

CPU Load Average 1 Min

hp.2.3.1.1.3 / 100

CPU Load Average 5 Min

hp.2.3.1.1.4 / 100

CPU Load Average 15 Min

hp.2.3.1.1.5 / 100

CPU Utilization

Total CPU

#1

User CPU

#2

System CPU

#3

Wait CPU

#4

CPU Utilization (VOS3)

Total CPU

hitachi.5.7.2.3.4

Task CPU

hitachi.5.7.2.3.5

Action CPU

hitachi.5.7.2.3.6

Core CPU

hitachi.5.7.2.3.7

System Table Entries

Process

#9

i Node

#10

File

#11

File System I/Os

read

[Figure]hitachi.5.1.2.2.1.10 / collection-interval

write

[Figure]hitachi.5.1.2.2.1.12 / collection-interval

Run Queue Length

Run Queue Length

hitachi.5.1.2.2.1.15

System Calls

System Calls

#5

Interruptions

Interruptions

#6

Context Switches

Context Switches

#7

Active Processes

Wait for Execution

#12

Wait for Transfer

#13

Wait for Page In

#14

Sleep

#15

Swap Out

#16

Process Size

Total Physical Memory

#17

Wait Physical Memory

#18

Total Virtual Memory

#19

Wait Virtual Memory

#20

Login Users

Login Users

hp.2.3.1.1.2

Legend:

[Figure] indicates the increment per collection interval.

#1, #2, #3, #4

1. If the agent type is PE, PD, PC, or PA:

UserCpu=[Figure]hp.2.3.1.1.13

NiceCpu=[Figure]hp.2.3.1.1.16

SystemCpu=[Figure]hp.2.3.1.1.14

Interval=[Figure]hp.2.3.1.1.1

#1: (UserCpu + NiceCpu + SystemCpu) / Interval x 100

#2: (UserCpu + NiceCpu) / Interval x 100

#3: SystemCpu / Interval x 100

2. If the agent type is WB, WA, or W1:

UserCpu=[Figure]hitachi.5.1.2.2.1.3

SystemCpu=[Figure]hitachi.5.1.2.2.1.1

IdleCpu=[Figure]hitachi.5.1.2.2.1.2

#1: (UserCpu + SystemCpu) / (UserCpu + SystemCpu + IdleCpu) x 100

#2: UserCpu / (UserCpu + SystemCpu + IdleCpu) x 100

#3: SystemCpu / (UserCpu + SystemCpu + IdleCpu) x 100

3. If the agent type is AA:

UserCpu=hitachi.5.1.2.3.1.1

SystemCpu=hitachi.5.1.2.3.1.2

WaitCpu=hitachi.5.1.2.3.1.4

#1: UserCpu + SystemCpu

In SSO 08-00 or later, the WaitCpu value is not added.

#2: UserCpu

#3: SystemCpu

#4: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

4. If the agent type is SB:

UserCpu=hitachi.5.1.2.4.1.1

SystemCpu=hitachi.5.1.2.4.1.2

WaitCpu=hitachi.5.1.2.4.1.4

#1: UserCpu + SystemCpu

In SSO 08-00 or later, the WaitCpu value is not added.

#2: UserCpu

#3: SystemCpu

#4: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

5. If the agent type is LA:

UserCpu=hitachi.5.1.2.5.1.1

SystemCpu=hitachi.5.1.2.5.1.2

#1: UserCpu + SystemCpu

#2: UserCpu

#3: SystemCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

6. If the agent type is T1:

UserCpu=hitachi.5.1.2.6.1.1

SystemCpu=hitachi.5.1.2.6.1.2

#1: UserCpu + SystemCpu

#2: UserCpu

#3: SystemCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

7. If the agent type is SD, SC, AC, or AB:

UserCpu=hitachi.5.1.2.1.10.3

SystemCpu=hitachi.5.1.2.1.10.4

WaitCpu=hitachi.5.1.2.1.10.5

#1: UserCpu + SystemCpu

In SSO 08-00 or later, the WaitCpu value is not added.

#2: UserCpu

#3: SystemCpu

#4: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

8. If the agent type is LB:

UserCpu=hitachi.5.1.2.1.10.3

SystemCpu=hitachi.5.1.2.1.10.4

#1: UserCpu + SystemCpu

#2: UserCpu

#3: SystemCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

9. If the agent type is LD, or LC:

UserCpu=hitachi.5.1.2.1.10.3

SystemCpu=hitachi.5.1.2.1.10.4

WaitCpu= hitachi.5.1.2.1.10.5

#1: UserCpu + SystemCpu

#2: UserCpu

#3: SystemCpu

#4: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

10. If the agent type is PF:

UserCpu=[Figure]hitachi.5.1.2.1.24.13

NiceCpu=[Figure]hitachi.5.1.2.1.24.16

SystemCpu=[Figure]hitachi.5.1.2.1.24.14

Interval=[Figure]hitachi.5.1.2.1.24.1

#1: (UserCpu + SystemCpu + NiceCpu) / Interval x 100

#2: (UserCpu + NiceCpu) / Interval x 100

#3: SystemCpu / Interval x 100

#5

If the agent type is PD, PA, AB, or AA:

[Figure]hitachi.5.1.2.1.2.32 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.32 / collection-interval

If the agent type is WB, WA, or W1:

[Figure]hitachi.5.1.2.2.1.16 / collection-interval

#6

If the agent type is PD, PA, AB, or AA:

[Figure]hitachi.5.1.2.1.2.19 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.19 / collection-interval

If the agent type is WB, WA, or W1

[Figure]hitachi.5.1.2.2.1.18 / collection-interval

#7

If the agent type is PD, PA, AB, or AA:

[Figure]hitachi.5.1.2.1.2.31 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.31 / collection-interval

If the agent type is WB, WA, or W1:

[Figure]hitachi.5.1.2.2.1.5 / collection-interval

#8

If the agent type is PF, PE, PD, PC, or PA:

hp.2.3.1.4.2.1.27

#9

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.24

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.24

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#10

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.25

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.25

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#11

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.26

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.26

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#12

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.7

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.7

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#13

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.8

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.8

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#14

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.9

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.9

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#15

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.10

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.10

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#16

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.11

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.11

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#17

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.16

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.16

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#18

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.17

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.17

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#19

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.14

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.14

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#20

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.15

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.15

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#21

If the agent type is PF, SD, AC, or LD:

hitachi.5.1.2.1.24.1

Other than the above:

hp.2.3.1.1.1

(2) CPU group

The following table lists the resources of the CPU group and the MIB objects obtained during resource collection.

Table F‒11: MIB objects to be obtained (CPU group)

Resource

Subresource

MIB object acquired

CPU Summary

CPU Quantity

#1

CPU Load Average

CPU Load Average 1 Min

#6

CPU Load Average 5 Min

#7

CPU Load Average 15 Min

#8

CPU Utilization

Total CPU

#2

User CPU

#3

System CPU

#4

Wait CPU

#5

File System I/Os

read

#9

write

#10

NFS I/Os

read

#11

write

#12

Run Queue Length

Run Queue Length

#13

System Calls

exec

#14

read

#15

write

#16

I/O Characters

read

#17

canon

#18

output

#19

#1

If the agent type is PD, or PA:

hitachi.5.1.2.1.4.1

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.17.1

If the agent type is WB, WA, or W1:

hitachi.5.1.2.2.4.1

#2, #3, #4, #5

1. If the agent type is PD, or PA:

UserCpu=[Figure]hitachi.5.1.2.1.4.2.1.28

NiceCpu=[Figure]hitachi.5.1.2.1.4.2.1.29

SystemCpu=[Figure]hitachi.5.1.2.1.4.2.1.30

IdleCpu=[Figure]hitachi.5.1.2.1.4.2.1.31

WaitCpu=[Figure]hitachi.5.1.2.1.4.2.1.32

#2: (UserCpu + NiceCpu + SystemCpu) / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

In SSO 08-00 or later, the WaitCpu value is not added.

#3: (UserCpu + NiceCpu) / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

#4: SystemCpu / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

#5: WaitCpu / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

2. If the agent type is PF, PE, or PC:

UserCpu=[Figure]hitachi.5.1.2.1.17.2.1.28

NiceCpu=[Figure]hitachi.5.1.2.1.17.2.1.29

SystemCpu=[Figure]hitachi.5.1.2.1.17.2.1.30

IdleCpu=[Figure]hitachi.5.1.2.1.17.2.1.31

WaitCpu=[Figure]hitachi.5.1.2.1.17.2.1.32

#2: (UserCpu + NiceCpu + SystemCpu) / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

In SSO 08-00 or later, the WaitCpu value is not added.

#3: (UserCpu + NiceCpu) / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

#4: SystemCpu / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

#5: WaitCpu / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

3. If the agent type is WB, WA, or W1:

UserCpu=[Figure]hitachi.5.1.2.2.4.2.1.4

SystemCpu=[Figure]hitachi.5.1.2.2.4.2.1.2

IdleCpu=[Figure]hitachi.5.1.2.2.4.2.1.3

#2: (UserCpu + SystemCpu) / (UserCpu + SystemCpu + IdleCpu) x 100

#3: UserCpu / (UserCpu + SystemCpu + IdleCpu) x 100

#4: SystemCpu / (UserCpu + SystemCpu + IdleCpu) x 100

4. If the agent type is SD, SC, SB, AC, AB, or AA:

UserCpu=hitachi.5.1.2.1.10.1.1.2

SystemCpu=hitachi.5.1.2.1.10.1.1.3

WaitCpu=hitachi.5.1.2.1.10.1.1.4

#2: UserCpu + SystemCpu

In SSO 08-00 or later, the WaitCpu value is not added.

#3: UserCpu

#4: SystemCpu

#5: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

5. If the agent type is LB, or LA:

UserCpu=hitachi.5.1.2.1.10.1.1.2

SystemCpu=hitachi.5.1.2.1.10.1.1.3

#2: UserCpu + SystemCpu

#3: UserCpu

#4: SystemCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

6. If the agent type is LD, or LC:

UserCpu=hitachi.5.1.2.1.10.1.1.2

SystemCpu=hitachi.5.1.2.1.10.1.1.3

WaitCpu=hitachi.5.1.2.1.10.1.1.4

#2: UserCpu + SystemCpu

#3: UserCpu

#4: SystemCpu

#5: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#6

If the agent type is PD, or PA:

hitachi.5.1.2.1.4.2.1.25 / 100

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.17.2.1.25 / 100

#7

If the agent type is PD, or PA:

hitachi.5.1.2.1.4.2.1.26 / 100

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.17.2.1.26 / 100

#8

If the agent type is PD, or PA:

hitachi.5.1.2.1.4.2.1.27 / 100

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.17.2.1.27 / 100

#9

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.2 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.2 / collection-interval

#10

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.3 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.3 / collection-interval

#11

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.6 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.6 / collection-interval

#12

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.7 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.7 / collection-interval

#13

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.11

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.11

#14

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.12 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.12 / collection-interval

#15

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.13 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.13 / collection-interval

#16

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.14 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.14 / collection-interval

#17

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.22 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.22 / collection-interval

#18

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.23 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.23 / collection-interval

#19

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.4.2.1.24 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.17.2.1.24 / collection-interval

(3) Memory group

The following table lists the resources of the memory group and the MIB objects obtained during resource collection.

Table F‒12: MIB objects to be obtained (Memory group)

Resource

Subresource

MIB object acquired

Memory Summary

Physical Memory

#1

Free Memory

#2

Memory Utilization

#3

Configured Swap

#4

Enabled Swap

#5

Free Swap

#6

Swap Utilization

#7

Swap Summary

Swap Type

#8

Swap Using Flag

#9

Swap Priority

#10

Swap Space

#11

Free Swap

#12

Mount Point

#13

Memory Utilization

Memory Utilization

#3

Free Memory Size

Free Memory Size

#2

Swap Utilization

Swap Utilization

#7

Free Swap Size

Free Swap Size

#6

Paging Pages

Free

#15

Load

#16

Page In

#17

Page Out

#18

Swap In

#19

Swap Out

#20

Scan

#21

Reclaimed

#22

Paging Times

Page In

#23

Page Out

#24

Swapping Times

Swap In

#25

Swap Out

#26

Page Faults

Page Faults

#14

TLB Flashes

TLB Flashes

#27

Free Pages

Free Pages

hitachi.5.7.2.6.59

Free Rblw Pages

hitachi.5.7.2.6.60

Workingset Size

Job Total Workingset Size

hitachi.5.7.2.6.61

Job Rblw Workingset Size

hitachi.5.7.2.6.62

LSQA pages

LSQA Total Pages

hitachi.5.7.2.6.63

LSQA Rblw Pages

hitachi.5.7.2.6.64

Common Pages

Common Total Pages

hitachi.5.7.2.6.65

Common Rblw Pages

hitachi.5.7.2.6.66

SQA Pages

SQA Total Pages

hitachi.5.7.2.6.67

SQA Rblw Pages

hitachi.5.7.2.6.68

NUC Pages

NUC Total Pages

hitachi.5.7.2.6.69

NCU Rblw Pages

hitachi.5.7.2.6.70

Fix Pages

Fix Total Pages

hitachi.5.7.2.6.71

Fix Rblw Pages

hitachi.5.7.2.6.72

#1

If the agent type is V3:

hitachi.5.7.2.6.58 x 4

If the agent type is PF, SD, AC, LD, or WB:

hitachi.5.1.2.1.24.8

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

hp.2.3.1.1.8

#2

If the agent type is V3:

hitachi.5.7.2.6.59 x 4

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is PF, SD, AC, LD, or WB:

hitachi.5.1.2.1.24.7

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

hp.2.3.1.1.7

#3

If the agent type is V3:

(hitachi.5.7.2.6.58 - hitachi.5.7.2.6.59) / hitachi.5.7.2.6.58 x 100

If the agent type is PF, SD, AC, LD, or WB:

(hitachi.5.1.2.1.24.8 - hitachi.5.1.2.1.24.7) / hitachi.5.1.2.1.24.8 x 100

Other than the above:

(hp.2.3.1.1.8 - hp.2.3.1.1.7) / hp.2.3.1.1.8 x 100

#4

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.1

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.1

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is AB, AA, WA, or W1:

hitachi.5.1.2.1.7.1

If the agent type is SC, SB, LC, LB, LA, or T1:

hp.2.3.1.1.10

If the agent type is SD, AC, LD, or WB:

hitachi.5.1.2.1.24.10

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#5

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.2

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.2

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is WA, or W1:

hitachi.5.1.2.1.7.2

If the agent type is WB:

hitachi.5.1.2.1.24.11

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#6

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.3

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.3

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is AB, AA, WA, or W1:

hitachi.5.1.2.1.7.3

If the agent type is SC, SB, LC, LB, LA, or T1:

hp.2.3.1.1.12

If the agent type is SD, AC, LD, or WB:

hitachi.5.1.2.1.24.12

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#7

If the agent type is PD, or PA:

(hitachi.5.1.2.1.9.1 - hitachi.5.1.2.1.9.3) / hitachi.5.1.2.1.9.1 x 100

If the agent type is PD, or PA:PF, PE, or PC:

(hitachi.5.1.2.1.19.1 - hitachi.5.1.2.1.19.3) / hitachi.5.1.2.1.19.1 x 100

If the agent type is AB, AA, WA, or W1:

(hitachi.5.1.2.1.7.1 - hitachi.5.1.2.1.7.3) / hitachi.5.1.2.1.7.1 x 100

If the agent type is SC, SB, LC, LB, LA, or T1:

(hp.2.3.1.1.10-hp.2.3.1.1.12) / hp.2.3.1.1.10 x 100

If the agent type is SD, AC, LD, or WB:

(hitachi.5.1.2.1.24.10-hitachi.5.1.2.1.24.12) / hitachi.5.1.2.1.24.10 x 100

#8

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.2

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.2

#9

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.3

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.3

#10

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.4

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.4

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#11

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.9 or hitachi.5.1.2.1.9.11.1.10

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.9 or hitachi.5.1.2.1.19.11.1.10

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#12

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.5

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.5

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#13

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.14

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.14

#14

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.18 / collection-interval

If the agent type is WB, WA, or W1:

[Figure]hitachi.5.1.2.2.2.9 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.18 / collection-interval

#15

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.16 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.16 / collection-interval

#16

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.17 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.17 / collection-interval

#17

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.26 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.26 / collection-interval

#18

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.27 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.27 / collection-interval

#19

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.28 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.28 / collection-interval

#20

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.29 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.29 / collection-interval

#21

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.37 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.37 / collection-interval

#22

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.38 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.38 / collection-interval

#23

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.24 / collection-interval

If the agent type is AC, AB, or AA:

[Figure]hitachi.5.1.2.1.13.24 / collection-interval

Other than the above:

[Figure]hitachi.5.1.2.1.2.24 / collection-interval

#24

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.25 / collection-interval

If the agent type is AC, AB, or AA:

[Figure]hitachi.5.1.2.1.13.25 / collection-interval

Other than the above:

[Figure]hitachi.5.1.2.1.2.25 / collection-interval

#25

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.14 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.14 / collection-interval

#26

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.2.15 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.15.15 / collection-interval

#27

If the agent type is PD, or PA:

hitachi.5.1.2.1.2.7

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.15.7

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

(4) Disk group

The following table lists the resources of the disk group and the MIB objects obtained during resource collection.

Table F‒13: MIB objects to be obtained (Disk group)

Resource

Subresource

MIB object acquired

Disk Busy Utilization

Instance Name

#3

Disk Busy Utilization

#4

Disk Busy

Disk Busy

#1

Disk I/Os

Instance Name

#5

read

#6

write

#7

Data Transfers

Instance Name

#8

Data Transfers

#2

Legend:

[Figure] indicates the increment per collection interval.

#1

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.5.2.1.4 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.18.2.1.4 / collection-interval

#2

If the agent type is PD, or PA:

[Figure]hitachi.5.1.2.1.5.2.1.7 / collection-interval

If the agent type is PF, PE, or PC:

[Figure]hitachi.5.1.2.1.18.2.1.7 / collection-interval

If the agent type is LD, or LC:

[Figure]hitachi.5.1.2.1.23.2.1.6 / collection-interval

#3

If the agent type is SB:

hitachi.5.1.2.1.8.2.1.1

If the agent type is SD, SC, or AB:

hitachi.5.1.2.1.22.1.1.1, hitachi.5.1.2.1.22.1.1.2

If the agent type is AC, LD, or LC

hitachi.5.1.2.1.23.2.1.1, hitachi.5.1.2.1.23.2.1.2

#4

If the agent type is SB:

hitachi.5.1.2.1.8.2.1.2

If the agent type is SD, SC, or AB:

hitachi.5.1.2.1.22.1.1.3

If the agent type is AC, LD, or LC:

[Figure]hitachi.5.1.2.1.23.2.1.3 / 1000 / collection-interval x 100

#5

If the agent type is AC, LD, or LC:

hitachi.5.1.2.1.23.2.1.1, hitachi.5.1.2.1.23.2.1.2

Other than the above:

Hitachi.5.1.2.3.2.2.1.2

#6

If the agent type is AC, LD, or LC:

[Figure]hitachi.5.1.2.1.23.2.1.4 / collection-interval

Other than the above:

[Figure]Hitachi.5.1.2.3.2.2.1.3 / collection-interval

#7

If the agent type is AC, LD, or LC:

[Figure]hitachi.5.1.2.1.23.2.1.5 / collection-interval

Other than the above:

[Figure]Hitachi.5.1.2.3.2.2.1.4 / collection-interval

#8

If the agent type is LD, or LC:

hitachi.5.1.2.1.23.2.1.1, hitachi.5.1.2.1.23.2.1.2

(5) File System group

The following table lists the resources of the file system group and the MIB objects obtained during resource collection.

Table F‒14: MIB objects to be obtained (File System group)

Resource

Subresource

MIB object acquired

File System Summary

Instance Name

#5

File System Name

#6

Total Size

#1

Used Size

#2

Free Size

#3

Available Size

#4

Utilization

#7

File System Utilization

Instance Name

#5

File System Utilization

#7

File System Available

Instance Name

#5

File System Available

#4

#1

If the agent type is W1:

hp.2.3.1.2.2.1.4

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, or LB:

(hitachi.5.1.2.1.21.2.1.5 x hitachi.5.1.2.1.21.2.1.8) / 1024

If the agent type is WB, or WA:

hitachi.5.1.2.1.21.2.1.5

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

(hp.2.3.1.2.2.1.4 x hp.2.3.1.2.2.1.7) / 1024

#2

If the agent type is W1:

hp.2.3.1.2.2.1.4 - hp.2.3.1.2.2.1.5

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, or LB:

((hitachi.5.1.2.1.21.2.1.5 - hitachi.5.1.2.1.21.2.1.6) x hitachi.5.1.2.1.21.2.1.8) / 1024

If the agent type is WB, or WA:

hitachi.5.1.2.1.21.2.1.5 - hitachi.5.1.2.1.21.2.1.6

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

((hp.2.3.1.2.2.1.4 - hp.2.3.1.2.2.2.1.5) x hp.2.3.1.2.2.1.7) / 1024

#3

If the agent type is W1:

hp.2.3.1.2.2.1.5

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, or LB:

(hitachi.5.1.2.1.21.2.1.6 x hitachi.5.1.2.1.21.2.1.8) / 1024

If the agent type is WB, or WA:

hitachi.5.1.2.1.21.2.1.6

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

(hp.2.3.1.2.2.1.5 x hp.2.3.1.2.2.1.7) / 1024

#4

If the agent type is W1:

hp.2.3.1.2.2.1.6

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, or LB:

(hitachi.5.1.2.1.21.2.1.7 x hitachi.5.1.2.1.21.2.1.8) / 1024

If the agent type is WB, or WA:

hitachi.5.1.2.1.21.2.1.7

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

(hp.2.3.1.2.2.1.6 x hp.2.3.1.2.2.1.7) / 1024

#5

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, LB, WB, or WA:

hitachi.5.1.2.1.21.2.1.11

Other than the above:

hp.2.3.1.2.2.1.10

#6

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, LB, WB, or WA:

hitachi.5.1.2.1.21.2.1.4

Other than the above:

hp.2.3.1.2.2.1.3

#7

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, LB, WB, or WA:

((hitachi.5.1.2.1.21.2.1.5 - hitachi.5.1.2.1.21.2.1.6) / (hitachi.5.1.2.1.21.2.1.5 - hitachi.5.1.2.1.21.2.1.6 + hitachi.5.1.2.1.21.2.1.7)) x 100

Other than the above:

((hp.2.3.1.2.2.1.4 - hp.2.3.1.2.2.1.5) / (hp.2.3.1.2.2.1.4 - hp.2.3.1.2.2.1.5 + hp.2.3.1.2.2.1.6)) x 100

(6) Network group

The following table lists the resources of the network group and the MIB objects obtained during resource collection.

Table F‒15: MIB objects to be obtained (Network group)

Resource

Subresource

MIB object acquired

Network Summary

Interface Name

mib2.2.2.1.2

Interface Type

mib2.2.2.1.3

Maximum IP Datagram

mib2.2.2.1.4

Interface Speed

mib2.2.2.1.5

IP Address

mib2.4.20.1.1

mib2.4.20.1.2

Subnet Mask

mib2.4.20.1.2

mib2.4.20.1.3

Interface Address

mib2.2.2.1.6

Interface Status

mib2.2.2.1.8

Interface Utilization#

Total

([Figure]mib2.2.2.1.10 + [Figure]mib2.2.2.1.16) x 8 / (collection-interval x mib2.2.2.1.5) x 100

Average

([Figure]mib2.2.2.1.10 / 2 + [Figure]mib2.2.2.1.16 / 2) x 8 / (collection-interval x mib2.2.2.1.5) x 100

Interface Uses

InOctets

[Figure]mib2.2.2.1.10 / collection-interval

OutOctets

[Figure]mib2.2.2.1.16 / collection-interval

Interface Traffic

InUcastPkts

[Figure]mib2.2.2.1.11 / collection-interval

InNUcastPkts

[Figure]mib2.2.2.1.12 / collection-interval

InErrors

[Figure]mib2.2.2.1.14 / collection-interval

OutUcastPkts

[Figure]mib2.2.2.1.17 / collection-interval

OutNUcastPkts

[Figure]mib2.2.2.1.18 / collection-interval

OutErrors

[Figure]mib2.2.2.1.20 / collection-interval

IP Traffic

InReceives

[Figure]mib2.4.3 / collection-interval

InUnknownProtos

[Figure]mib2.4.7 / collection-interval

InDelivers

[Figure]mib2.4.9 / collection-interval

OutRequests

[Figure]mib2.4.10 / collection-interval

OutNoRoutes

[Figure]mib2.4.12 / collection-interval

ICMP Traffic

InMsgs

[Figure]mib2.5.1 / collection-interval

InErrors

[Figure]mib2.5.2 / collection-interval

InEchos

[Figure]mib2.5.8 / collection-interval

InEchoReps

[Figure]mib2.5.9 / collection-interval

OutMsgs

[Figure]mib2.5.14 / collection-interval

OutErrors

[Figure]mib2.5.15 / collection-interval

OutEchos

[Figure]mib2.5.21 / collection-interval

OutEchoReps

[Figure]mib2.5.22 / collection-interval

TCP Traffic

InSegs

[Figure]mib2.6.10 / collection-interval

OutSegs

[Figure]mib2.6.11 / collection-interval

RetransSegs

[Figure]mib2.6.12 / collection-interval

InErrs

[Figure]mib2.6.14 / collection-interval

OutRsts

[Figure]mib2.6.15 / collection-interval

UDP Traffic

InDatagrams

[Figure]mib2.7.1 / collection-interval

InNoPorts

[Figure]mib2.7.2 / collection-interval

InErrors

[Figure]mib2.7.3 / collection-interval

OutDatagrams

[Figure]mib2.7.4 / collection-interval

SNMP Traffic

InPkts

[Figure]mib2.11.1 / collection-interval

OutPkts

[Figure]mib2.11.2 / collection-interval

OutTooBigs

[Figure]mib2.11.20 / collection-interval

OutNoSuchNames

[Figure]mib2.11.21 / collection-interval

OutBadValues

[Figure]mib2.11.22 / collection-interval

OutGenErrors

[Figure]mib2.11.24 / collection-interval

Ping Response Time

Ping Response Time

hp.2.7.1

Legend:

[Figure] indicates the increment per collection interval.

#:

Use Total in the case of half-duplex communications.

Use Average in the case of full-duplex communications.

(7) Channel group

The following table lists the resources of the channel group and the MIB objects obtained during resource collection.

Table F‒16: MIB objects to be obtained (Channel group)

Resource

Subresource

MIB object acquired

Channel Summary

Channel Quantity

hitachi.5.7.2.10.1

Channel Busy Utilization

Instance Name

hitachi.5.7.2.10.2.1.2

Channel Busy Utilization

hitachi.5.7.2.10.2.1.3

(8) Virtual Memory Used Area group

The following table lists the resources of the virtual memory used area group and the MIB objects obtained during resource collection.

Table F‒17: MIB objects to be obtained (Virtual Memory Used Area group)

Resource

Subresource

MIB object acquired

Pages

Instance Name

hitachi.5.7.2.2.1.1.2

Used Pages

hitachi.5.7.2.2.1.1.3

Area Utilization

Instance Name

hitachi.5.7.2.2.1.1.2

Area Utilization

hitachi.5.7.2.2.1.1.7

Max Utilization

hitachi.5.7.2.2.1.1.8

(9) SMS group

The following table lists the resources of the SMS group and the MIB objects obtained during resource collection.

Table F‒18: MIB objects to be obtained (SMS group)

Resource

Subresource

MIB object acquired

Computer Summary

Host Name

hitachi.5.1.5.2.1.1.1.2

Domain Name

hitachi.5.1.5.2.1.1.1.5

Operating System Summary

OS Name

hitachi.5.1.5.2.4.1.1.3

OS Version

hitachi.5.1.5.2.4.1.1.4

Installation Date

hitachi.5.1.5.2.4.1.1.5

Registered Owner

hitachi.5.1.5.2.4.1.1.6

Registered Organization

hitachi.5.1.5.2.4.1.1.7

Build Number

hitachi.5.1.5.2.4.1.1.8

Build Type

hitachi.5.1.5.2.4.1.1.9

Root Directory

hitachi.5.1.5.2.4.1.1.10

Start Option

hitachi.5.1.5.2.4.1.1.11

Country Code

hitachi.5.1.5.2.4.1.1.12

Language ID

hitachi.5.1.5.2.4.1.1.13

CPU Summary

CPU Name

hitachi.5.1.5.2.3.1.1.3

CPU Type

hitachi.5.1.5.2.3.1.1.4

Memory Summary

Physical Memory

hitachi.5.1.5.2.8.1.1.3

Total Page File Space

hitachi.5.1.5.2.8.1.1.4

Page File Name

hitachi.5.1.5.2.8.1.1.5

File Size

hitachi.5.1.5.2.8.1.1.6

Base Memory

hitachi.5.1.5.2.8.1.1.7

Extended Memory

hitachi.5.1.5.2.8.1.1.8

Disk Summary

Disk Drive

hitachi.5.1.5.2.7.1.1.3

Storage Type

hitachi.5.1.5.2.7.1.1.4

File System Type

hitachi.5.1.5.2.7.1.1.5

Volume Name

hitachi.5.1.5.2.7.1.1.6

Serial Number

hitachi.5.1.5.2.7.1.1.7

Total Size

hitachi.5.1.5.2.7.1.1.8

Used Size

hitachi.5.1.5.2.7.1.1.9

Free Size

hitachi.5.1.5.2.7.1.1.10

Utilization

hitachi.5.1.5.2.7.1.1.11

Sectors

hitachi.5.1.5.2.7.1.1.12

Cylinders

hitachi.5.1.5.2.7.1.1.13

Heads

hitachi.5.1.5.2.7.1.1.14

Network Summary

Network Status

hitachi.5.1.5.2.5.1.1.3

Software Major Version

hitachi.5.1.5.2.5.1.1.4

Software Minor Version

hitachi.5.1.5.2.5.1.1.5

Software Name

hitachi.5.1.5.2.5.1.1.6

IPX Address

hitachi.5.1.5.2.5.1.1.7

IP Address

hitachi.5.1.5.2.5.1.1.8

Subnet Mask

hitachi.5.1.5.2.5.1.1.9

Default Gateway

hitachi.5.1.5.2.5.1.1.10

Logon User

hitachi.5.1.5.2.5.1.1.11

Work Group

hitachi.5.1.5.2.5.1.1.12

Shell Major Version

hitachi.5.1.5.2.5.1.1.13

Shell Minor Version

hitachi.5.1.5.2.5.1.1.14

Serial Port Summary

Port Address

hitachi.5.1.5.2.9.1.1.4

Baud Rate

hitachi.5.1.5.2.9.1.1.5

Parity Enabled

hitachi.5.1.5.2.9.1.1.6

Parity

hitachi.5.1.5.2.9.1.1.7

Byte Size

hitachi.5.1.5.2.9.1.1.8

Stop Bits

hitachi.5.1.5.2.9.1.1.9

Carrier Detect

hitachi.5.1.5.2.9.1.1.10

Dataset Ready

hitachi.5.1.5.2.9.1.1.11

CTS

hitachi.5.1.5.2.9.1.1.12

Parallel Port Summary

Port Address

hitachi.5.1.5.2.10.1.1.4

Video Summary

Video Mode

hitachi.5.1.5.2.11.1.1.3

Maximum Rows

hitachi.5.1.5.2.11.1.1.4

Adapter Type

hitachi.5.1.5.2.11.1.1.5

Manufacturer

hitachi.5.1.5.2.11.1.1.6

Display Type

hitachi.5.1.5.2.11.1.1.7

Second Adapter Type

hitachi.5.1.5.2.11.1.1.8

BIOS Date

hitachi.5.1.5.2.11.1.1.9

Mouse Summary

Hardware Installed

hitachi.5.1.5.2.12.1.1.3

Hardware Type

hitachi.5.1.5.2.12.1.1.4

Manufacturer

hitachi.5.1.5.2.12.1.1.5

Buttons

hitachi.5.1.5.2.12.1.1.6

Language ID

hitachi.5.1.5.2.12.1.1.7

IRQ

hitachi.5.1.5.2.12.1.1.8

BIOS Summary

Manufacturer

hitachi.5.1.5.2.13.1.1.3

Category

hitachi.5.1.5.2.13.1.1.4

Release Date

hitachi.5.1.5.2.13.1.1.5

IRQ Summary

IRQ Number

hitachi.5.1.5.2.14.1.1.3

IRQ Address

hitachi.5.1.5.2.14.1.1.4

Description

hitachi.5.1.5.2.14.1.1.5

Detected

hitachi.5.1.5.2.14.1.1.6

Handled By

hitachi.5.1.5.2.14.1.1.7

Environment Summary

Environment Variable

hitachi.5.1.5.2.16.1.1.3

Environment Value

hitachi.5.1.5.2.16.1.1.4

Service Summary

Service Name

hitachi.5.1.5.2.17.1.1.3

Status

hitachi.5.1.5.2.17.1.1.4

Start Type

hitachi.5.1.5.2.17.1.1.5

Start Name

hitachi.5.1.5.2.17.1.1.6

EXE Path

hitachi.5.1.5.2.17.1.1.7

Network Card Summary

Manufacturer

hitachi.5.1.5.2.6.1.1.3

IRQ

hitachi.5.1.5.2.6.1.1.4

Port Address

hitachi.5.1.5.2.6.1.1.5

Audited Software Summary

Package Number

hitachi.5.1.5.2.15.1.1.3

Software Name

hitachi.5.1.5.2.15.1.1.4

File Path

hitachi.5.1.5.2.15.1.1.5

File Size

hitachi.5.1.5.2.15.1.1.6

File Date

hitachi.5.1.5.2.15.1.1.7

(10) HighCapacityNetwork group

The following table lists the resources of the HighCapacityNetwork group and the MIB objects obtained during resource collection.

Table F‒19: MIB objects to be obtained (HighCapacityNetwork group)

Resource

Subresource

MIB object acquired

Interface Utilization

Instance Name#

mib2.31.1.1.1.18

HalfDuplex

([Figure]mib2.31.1.1.1.6 + [Figure]mib2.31.1.1.1.10) x 8 / (collection-interval x mib2.31.1.1.1.15 x 1000000) x 100

FullDuplex

([Figure]mib2.31.1.1.1.6 / 2 + [Figure]mib2.31.1.1.1.10 / 2) x 8 / (collection-interval x mib2.31.1.1.1.15 x 1000000) x 100

Interface Uses

Instance Name#

mib2.31.1.1.1.18

InOctets

[Figure]mib2.31.1.1.1.6 / collection-interval

OutOctets

[Figure]mib2.31.1.1.1.10 / collection-interval

Interface Traffic

Instance Name#

mib2.31.1.1.1.18

InUcastPkts

[Figure]mib2.31.1.1.1.7 / collection-interval

InMulticastPkts

[Figure]mib2.31.1.1.1.8 / collection-interval

InBroadcastPkts

[Figure]mib2.31.1.1.1.9 / collection-interval

OutUcastPkts

[Figure]mib2.31.1.1.1.11 / collection-interval

OutMulticastPkts

[Figure]mib2.31.1.1.1.12 / collection-interval

OutBroadcastPkts

[Figure]mib2.31.1.1.1.13 / collection-interval

Legend:

[Figure] indicates the increment per collection interval.

Note:

SSO collects the resources of the HighCapacityNetwork group regardless of the agent type. However, SSO might be unable to collect resources of the HighCapacityNetwork group with some SNMP agents.

#:

If the value of the mib2.31.1.1.1.18 MIB cannot be obtained, the suffix of a MIB object obtained for a subresource other than the instance name is used as the value.

(11) IPv6 Network group

The following table lists the resources of the IPv6 network group and the MIB objects obtained during resource collection.

Table F‒20: MIB objects to be obtained (IPv6 Network group)

Resource

Subresource

MIB object acquired

IP Traffic

InReceives

[Figure]mib2.55.1.6.1.1 / collection-interval

InUnknownProtos

[Figure]mib2.55.1.6.1.6 / collection-interval

InDelivers

[Figure]mib2.55.1.6.1.9 / collection-interval

OutRequests

[Figure]mib2.55.1.6.1.11 / collection-interval

ICMP Traffic

InMsgs

[Figure]mib2.56.1.1.1.1 / collection-interval

InErrors

[Figure]mib2.56.1.1.1.2 / collection-interval

InEchos

[Figure]mib2.56.1.1.1.8 / collection-interval

InEchoReps

[Figure]mib2.56.1.1.1.9 / collection-interval

OutMsgs

[Figure]mib2.56.1.1.1.18 / collection-interval

OutErrors

[Figure]mib2.56.1.1.1.19 / collection-interval

OutEchos

[Figure]mib2.56.1.1.1.25 / collection-interval

OutEchoReps

[Figure]mib2.56.1.1.1.26 / collection-interval

Legend:

[Figure] indicates the increment per collection interval.

SSO collects the resources of the IPv6 Network group regardless of the agent type. However, SSO might be unable to collect resources of the IPv6 Network group with some SNMP agents.