4.6 Process Configuration window
The Process Configuration window sets the process monitoring conditions. The following figure shows the Process Configuration window.
If the Process Configuration window is already running, or the ssopsset command that sets monitoring conditions is being executed, you can start the Process Configuration window in reference mode. The following figure shows the Process Configuration window(reference mode).
The items to be set are:
- List of monitoring servers
-
This box displays the servers registered as monitoring servers and the monitoring conditions set for each server.
Item
Description
Monitoring Server Name
Displays the host name and IP address of the monitoring server for process monitoring. In addition, if the host name cannot be resolved, only the IP address is displayed.
Monitoring
Displays the monitoring interval (in minutes) for process monitoring, which is set in the Set Monitor Interval window. If the process monitoring interval setting cannot be applied to a monitoring server, a hyphen (-) is displayed.#
Health Check
Displays the health check interval (in minutes) which is performed regularly from the monitoring server, which is set in the Set Health Check Interval window.
- Delete
-
This button deletes the selected server from List of monitoring servers.
- Server Name
-
Specify a host name or IP address to be added to List of monitoring servers by specifying a character string of 256 bytes or less.
- Add
-
This button adds the server specified in Server Name to List of monitoring servers.
- List of monitoring applications
-
This box displays the applications registered in the server selected in List of monitoring servers and the monitoring conditions set for each application.
Item
Description
Monitoring
Displays the setting status of monitoring mode for the application. When the application is being monitored, Set is displayed. When the application is not being monitored, UnSet is displayed.
Application Name
Displays the registered applications.
- Monitoring Object
-
Limits the applications to be displayed in List of monitoring applications.
-
All
Displays applications that monitor both processes and services.
-
Process
Displays applications that monitor processes only.
-
Service
Displays applications that monitor services only.
-
- Monitoring - Set / Unset
-
Set whether to monitor the selected application.
The next table explains the menu items.
Menu bar |
Menu command |
Description |
|
---|---|---|---|
File |
Change Connection# |
Changes the connection destination. |
|
Save |
Saves the settings and starts monitoring. |
||
View |
Update Condition |
Obtains a monitoring condition again. You can use this command when you opened the window in reference mode. |
|
Search Monitoring Server |
Displays the Search Monitoring Server window. This menu command can be selected only when List of monitoring servers contains at least one server. |
||
Option |
Monitoring Server |
Setting the monitoring interval |
Displays the Set Monitor Interval window. |
Setting the health check interval |
Displays the Set Health Check Interval window. |
||
Monitoring Application |
Automatic Action |
Displays the Automatic Action window. |
|
Remote Command |
Displays the Remote Command window. |
||
Application Registration |
Displays the Register Application window. |
- Organization of this section
-