KAVU2251-E

An error occurred in SSL communication processing.(logical-host-name, name-of-host-to-be-connected, maintenance-information)

An error occurred during SSL communication processing. The probable causes are as follows:

The communication encryption function is disabled at the connection destination.
The SSL protocol versions that can be used are different from those of the connection destination host where the jobnet is to be executed.
A temporary communication error occurred.
The port numbers set by using the destination port mapping function are incorrect.

If this message is output at the reception side of TCP/IP communication, a null character string is output for connection-destination-host-name.

For a physical host, JP1_DEFAULT is indicated in logical-host-name.

(S)

Cancels communication processing, and then continues subsequent processing.

(O)

If the communication encryption function is disabled at the connection destination:: Enable the communication encryption function for the host indicated in connection-destination-host-name.
If the SSL protocol versions that can be used are different from those of the connection destination host where the jobnet is to be executed:: Make sure that the SSL protocol versions that can be used are shared with the connection destination host where the jobnet is to be executed. For details about the procedure for changing the SSL protocol version, see the description of the communication encryption function in the JP1/Base User's Guide.
If a temporary communication error occurred:: Correct the cause of the error, and then retry the operation.
If the port number specified by the destination port mapping function is incorrect:: If the destination port mapping function is enabled, a port number is output for maintenance-information. Make sure that the destination port is correctly specified. If an error occurs before the function obtains the destination port, 0 is output as the port number for maintenance-information. For details about destination port mapping function, see 2.12.2(4) Destination port mapping function in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.