KAVT0293-W

An attempt to communicate with the agent indicated by host= agent-host-name has failed.

The start time of a jobnet with a start condition, an event job or a custom event job might be delayed.

#

The IP address is output only when the LOGIPV6INFOALL environment setting parameter is set to yes. If the LOGIPV6INFOALL environment setting parameter is set to yes and the IP address is unknown, unknown is displayed.

(S)

Retries communication after the predefined period of time.

For details on this time, see Table 2-3 in 2.2.2(4) Notes on manager/agent system configurations in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

(O)

The cause of the communication error might be one of the following:

• There is a network failure.

• The agent machine or the JP1/AJS3 has stopped.

• The IP address of agent-host-name cannot be acquired.

• The port numbers set by using the destination port mapping function are incorrect.

If there is a network failure, investigate the cause of the network failure and correct the cause.

If the agent machine indicated by host=agent-host-name or JP1/AJS3 has stopped, restart the agent machine or JP1/AJS3.

If the IP address of the agent host indicated by host=agent-host-name cannot be acquired, configure DNS and hosts so that the IP address is resolved, and restart JP1/AJS3.

If the destination port mapping function is enabled, a port number is output for maintenance-information. Make sure that the destination port is correctly specified. If an error occurs before the function obtains the destination port, 0 is output as the port number for maintenance-information. For details about destination port mapping function, see 2.12.2(4) Destination port mapping function in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.