20.15.2 Details of the environment setting parameters for Management Portal execution environment
This subsection describes details of the environment setting parameters for management portal execution environment.
Note that the default of an environment setting parameter means the value that is assumed when the environment setting parameter is omitted.
- Organization of this subsection
(1) AUTHSYSLOG
- In Windows:
-
This parameter sets whether to output messages regarding user authentication to the Windows event log and the integrated trace log.
- In Linux:
-
This parameter sets whether to output messages regarding user authentication to the syslog and the integrated trace log.
- Format
-
"AUTHSYSLOG"="{none|all}"
- Specifiable values
-
- none
-
Messages related to user authentication are not output.
- all
-
Messages related to user authentication are output.
In Windows, if authentication is denied for the ajssysctlmd or ajssysctlad process, the KAVS1009-W message is output to the event log and the integrated trace log. In UNIX, that message is output to the syslog and the integrated trace log.
- Default value
-
none
- Recommended value
-
Set the value appropriate for the operating environment.
- When the setting takes effect
-
Immediately (the next time a user authentication request is received)
(2) SYSLOGCODE
Use this parameter to specify the language type of the messages that are output by the JP1/AJS3 System Control Manager service and JP1/AJS3 System Control Agent service to the syslog file.
- Format
-
"SYSLOGCODE"="{C|en_US.UTF-8|en_US.utf8|LANG-environment-variable-value}"
- Specifiable values (when the language type of JP1/AJS3 is Japanese or English)
-
- C, en_US.UTF-8, or en_US.utf8
-
The messages are output encoded with the English ASCII character set.
- LANG-environment-variable-value (character string other than C)
-
Operation depends on the settings of the LANG environment variable at the time the JP1/AJS3 System Control Manager service and JP1/AJS3 System Control Agent service starts. However, in some systems, a message in the language type corresponding to the LANG environment variable at the time the JP1/AJS3 System Control Manager service and JP1/AJS3 System Control Agent service starts might not be output to syslog. In such a system, make sure that this parameter is set to C. Check whether Japanese can be output in the system you are using by executing the logger command to output a message in Japanese and then confirming that the message is correctly output to syslog.
The LANG environment variable value differs depending on the OS.
The following table describes the values that can be specified for the LANG environment variable.
- Specifiable values (when the language type of JP1/AJS3 is Chinese)
-
- C
-
The messages are output encoded with the English ASCII character set.
- Default value
-
C
- Recommended value
-
Default value
- When the setting takes effect
-
After restarting the JP1/AJS3 System Control Manager service and JP1/AJS3 System Control Agent service
(3) CONRESTRICTSYSLOG
- In Windows:
-
This parameter sets whether to output messages regarding connection source restrictions to the Windows event log.
- In UNIX:
-
This parameter sets whether to output messages regarding connection source restrictions to the syslog.
- Format
-
"CONRESTRICTSYSLOG"="{none|all}"
- Specifiable values
-
- none
-
Does not output messages regarding connection source restrictions.
- all
-
Outputs messages regarding connection source restrictions.
In Windows, if connection is denied by the connection source restriction function for the ajssysctlmd or ajssysctlad process, the KAVS8040-E message is output to the event log. In UNIX, that message is output to the syslog.
- Default value
-
none
- Recommended value
-
Set the value appropriate for the operating environment.
- When the setting takes effect
-
When the JP1/AJS3 System Control Manager service and JP1/AJS3 System Control Agent service start
(4) AJSSYSCTLDLOGSIZE (for manager process)
Use this parameter to specify the size of the ajssysctlmd internal log file.
- Format
-
"AJSSYSCTLDLOGSIZE"=dword:size-of-ajssysctlmd-internal-log-file
- Specifiable values
-
00000000 or a value in kilobytes from 00000004 to 001E8480 in hexadecimal (in decimal 0 or a value from 4 to 2,000,000)
If you specify dword:00000000, the system does not create a log file.
- Default value
-
dword:00001000 (4,096 in decimal)
- Recommended value
-
Default value
- When the setting takes effect
-
When the ajssysctlmd process starts.
(5) LOGSIZE (for manager process)
Use this parameter to specify the size of the ajssysctlmd log file.
- Format
-
"LOGSIZE"=dword:size-of-ajssysctlmd-log-file
- Specifiable values
-
00000000 or a value in kilobytes from 00000004 to 001E8480 in hexadecimal (in decimal 0 or a value from 4 to 2,000,000)
If you specify dword:00000000, the system does not create a log file.
- Default value
-
dword:00002800 (10,240 in decimal)
- Recommended value
-
Set the value appropriate for the operating environment.
- When the setting takes effect
-
When the ajssysctlmd process starts.
(6) MAXOPEEXEC (for manager process)
Use this parameter to specify the maximum number of on-screen operations that can be performed concurrently for the manager host from the management portal for JP1/AJS3 - Web Console. Change this if operations are concentrated from multiple Web Console servers to a specific manager host and the message "KNAK3290-E The number of operation requests from the management portal to the connection-destination manager has exceeded the maximum number of operations that can be concurrently run." is displayed frequently.
The value specified for this parameter is the maximum value for the total number of operations on all physical and logical hosts that exist on the same machine. If the number of concurrent on-screen operations exceeds this value, attempts to perform more on-screen operations fail.
- Format
-
"MAXOPEEXEC"=dword:maximum-number-of-operations-that-can-be-performed-concurrently
- Specifiable values
-
A hexadecimal value from 0 to 64 (0 to 100 in decimal)
- Default value
-
dword:00000005 (5 in decimal)
- Recommended value
-
Set the value appropriate for the operating environment.
- When the setting takes effect
-
When the ajssysctlmd process starts.
(7) AJSSYSCTLDLOGSIZE (for agent process)
Use this parameter to specify the size of the ajssysctlad internal log file.
- Format
-
"AJSSYSCTLDLOGSIZE"=dword:size-of-ajssysctlad-internal-log-file
- Specifiable values
-
00000000 or a value in kilobytes from 00000004 to 001E8480 in hexadecimal (in decimal 0 or a value from 4 to 2,000,000)
If you specify dword:00000000, the system does not create a log file.
- Default value
-
dword:00001000 (4,096 in decimal)
- Recommended value
-
Default value
- When the setting takes effect
-
When the ajssysctlad process starts.
(8) LOGSIZE (for agent process)
Use this parameter to specify the size of the ajssysctlad log file.
- Format
-
"LOGSIZE"=dword:size-of-ajssysctlad-log-file
- Specifiable values
-
00000000 or a value in kilobytes from 00000004 to 001E8480 in hexadecimal (in decimal 0 or a value from 4 to 2,000,000)
If you specify dword:00000000, the system does not create a log file.
- Default value
-
dword:00002800 (10,240 in decimal)
- Recommended value
-
Set the value appropriate for the operating environment.
- When the setting takes effect
-
When the ajssysctlad process starts.
(9) MAXOPEEXEC (for agent process)
Use this parameter to specify the maximum number of on-screen operations that can be performed concurrently for the agent host from the management portal for JP1/AJS3 - Web Console. Change this if operations are concentrated from multiple Web Console servers to a specific agent host and the message "KAVS8510-E The operation cannot be executed, because the maximum number of concurrent operations has been exceeded. maintenance-information" is displayed frequently.
The value specified for this parameter is the maximum value for the total number of operations on all physical and logical hosts that exist on the same machine. If the number of concurrent on-screen operations exceeds this value, attempts to perform more on-screen operations fail.
- Format
-
"MAXOPEEXEC"=dword:maximum-number-of-operations-that-can-be-performed-concurrently
- Specifiable values
-
A hexadecimal value from 0 to 64 (0 to 100 in decimal)
- Default value
-
dword:00000005 (5 in decimal)
- Recommended value
-
Set the value appropriate for the operating environment.
- When the setting takes effect
-
When the ajssysctlad process starts.