A.1 Tables of port numbers

Organization of this subsection

(1) JP1/AJS3 - Manager port numbers

The following table lists the port numbers used for JP1/AJS3 - Manager.

Table A‒1: JP1/AJS3 - Manager port numbers
Service name	Port number	Purpose
jp1ajs2qman	20241/tcp	To receive job^#1 registrations To receive a job's^#1 standard output file and standard error output file To accept requests for execution of job execution commands^#2 other than jp1exec and jp1exit To link with JP1/OJE for VOS3 (to receive job registrations)
jp1ajs2qagt	20242/tcp^#3	To send job^#1 execution requests to JP1/AJS3 - Agent To send requests to confirm the operating status of jobs^#1 to JP1/AJS3 - Agent To send requests to check the status of jobs^#1 to JP1/AJS3 - Agent
jp1ajs2qnfy	20243/tcp	To receive job^#1 start/end notifications from JP1/AJS3 - Agent
jp1ajs2monitor	20244/tcp	JP1/AJS3 - Manager remote jobnet JP1/AJS3 - Manager remote command JP1/AJS3 - View JP1/AJS3 - Definition Assistant
jp1ajs2report	20245/tcp	To send job^#1 status notifications To link with JP1/OJE for VOS3 (to receive job status notifications)
jp1ajs2eamgr	20246/tcp	JP1/AJS3 - Manager event job and custom event job execution
jp1ajs2eaagt	20247/tcp^#3	JP1/AJS3 - Agent event job and custom event job execution
jp1ajs3cdinetd	22250/tcp	JP1/AJS3 - Web Console
jp1ajs2atmsg^#4	22251/tcp^#3	Flexible job execution
jp1ajs2atmsg^#4	22251/udp	Flexible job broadcast execution
jp1ajs2gw	23160/tcp	To communicate between scheduler services
jp1ajs2cm^#5	22275/tcp	To use JP1/AJS3 Console Manager To receive requests from JP1/AJS3 Console View
jp1ajs2ca^#5	22276/tcp	To use JP1/AJS3 Console Manager To connect with JP1/AJS3 Console Agent To use JP1/AJS3 Console Agent To receive requests from JP1/AJS3 Console Manager
jp1ajs2chkman^#4	23138/tcp	To use the definition pre-check function Used by the definition pre-check function^#6
jp1ajs2chkagt^#4	23139/tcp^#3	To use the definition pre-check function Used by the definition pre-check function
jp1ajs2qlagt^#4	20300/tcp^#3	To use queueless jobs For queueless job execution by JP1/AJS3 - Agent
jp1ajs2qlftp^#4	20301/tcp	To use queueless jobs For queueless file transfer from JP1/AJS3 - Manager
jp1ajs3sysctlm^#4	22256/tcp	To use the Web GUI (Management Portal) For accepting communications from JP1/AJS3 - Web Console
jp1ajs3sysctla^#4	22257/tcp^#3	To use the Web GUI (Management Portal) For accepting communications from the JP1/AJS3 System Control Manager service
None^#7	22220/tcp	To communicate with an embedded database that has been configured during the new installation^#8

Note: When activating multiple scheduler services within a single logical host, separately assign ports to each jp1ajs2report service. Then specify the service name of the job status notification port set in the JP1/AJS3 - Manager environment settings.
#1: Standard job, submit job, HTTP connection job, action job, or custom job.
#2: See the table of job execution commands in 1.5 Commands in the manual JP1/Automatic Job Management System 3 Command Reference.
#3: If the destination port mapping function is used, for communication to a container registered in the function, the port number mapped with the container is used. For details about destination port mapping function, see 2.12.2(4) Destination port mapping function.
#4: Not set at JP1/AJS3 - Manager installation. The port is set when you set up the functionality.
#5: Set during installation in the Windows version only. In UNIX, this is set when JP1/AJS3 Console is set up. JP1/AJS3 Console is functionality used for compatibility.
#6: In UNIX, the definition pre-check function does not use the port number for jp1ajs2chkman. In Windows, the port number for jp1ajs2chkman is used for communication within the same server.
#7: Not registered in services.
#8: If you have configured the embedded database by executing the jajs_setup, jajs_setup_cluster, and jajs_migrate commands, use the port numbers described in 2.6.5 Database settings that are set up in JP1/AJS3. If you have performed an advanced setup to configure the embedded database, use the port number specified by the -p option of the ajsembdbbuild command.

To Page Top

(2) JP1/AJS3 - Agent port numbers

The following table lists the port numbers used for JP1/AJS3 - Agent.

Table A‒2: JP1/AJS3 - Agent port numbers
Service name	Port number	Purpose
jp1ajs2qman	20241/tcp	To send a job's^#1 standard output file and standard error output file to JP1/AJS3 - Manager To send requests to JP1/AJS3 - Manager for job execution commands^#2 other than jp1exec and jp1exit
jp1ajs2qagt	20242/tcp	To accept job^#1 execution requests To accept requests to confirm the operating status of jobs^#1 To accept requests to check the status of jobs^#1
jp1ajs2qnfy	20243/tcp	To send job^#1 start/end notifications to JP1/AJS3 - Manager
jp1ajs2eamgr	20246/tcp	JP1/AJS3 - Manager event job and custom event job execution
jp1ajs2eaagt	20247/tcp	JP1/AJS3 - Agent event job and custom event job execution
jp1ajs2atmsg^#3	22251/tcp^#4,#5	Flexible job execution
jp1ajs2atmsg^#3	22251/udp^#4	Flexible job broadcast execution
jp1ajs2chkagt^#3	23139/tcp	To use the definition pre-check function Used by the definition pre-check function
jp1ajs2qlagt^#3	20300/tcp^#4	To use queueless jobs For queueless job execution by JP1/AJS3 - Agent
jp1ajs2qlftp^#3	20301/tcp^#4	To use queueless jobs For queueless file transfer from JP1/AJS3 - Manager
jp1ajs3sysctla^#3	22257/tcp	To use the Web GUI (Management Portal) For accepting communications from the JP1/AJS3 System Control Manager service

Note

The following service names may be added to the services file (or the /etc/services file in UNIX), but can be deleted because they are not used in JP1/AJS3 - Agent:

Service name: jp1ajs2monitor, port number: 20244
Service name: jp1ajs2report, port number: 20245
Service name: jp1ajs2gw, port number: 23160
Service name: jp1ajs3cdinetd, port number: 22250

#1

Standard job, submit job, HTTP connection job, action job, or custom job.

#2

See the table of job execution commands in 1.5 Commands in the manual JP1/Automatic Job Management System 3 Command Reference.

#3

Not set at JP1/AJS3 - Agent installation. The port is set when you set up the functionality.

#4

JP1/AJS3 - Agent Minimal Edition does not use this port number because JP1/AJS3 - Agent Minimal Edition cannot execute flexible and queueless jobs.

#5

If the destination port mapping function is used, for communication to a container registered in the function, the port number mapped with the container is used. For details about destination port mapping function, see 2.12.2(4) Destination port mapping function.

To Page Top

(3) JP1/AJS3 - View port number

The following table lists the port number used for JP1/AJS3 - View.

Table A‒3: JP1/AJS3 - View port number
Service name	Port number	Purpose
jp1ajs2monitor	20244/tcp	JP1/AJS3 - View
jp1ajs2cm^#	22275/tcp	To use JP1/AJS3 Console View To connect to JP1/AJS3 Console Manager

Note

The following service names are added to the services file, but can be deleted because they are not used in JP1/AJS3 - View:

Service name: jp1ajs2cfm, port number: 20450

#

JP1/AJS3 Console is functionality used for compatibility.

To Page Top

(4) JP1/AJS3 - Web Console port number

The following table lists the port number used for JP1/AJS3 - Web Console.

Table A‒4: JP1/AJS3 - Web Console port number
Service name	Port number	Purpose
jp1ajs3web	22252/tcp	To receive requests from a web browser (when SSL communication is not used)
jp1ajs3webssl	22253/tcp	To receive requests from a web browser (when SSL communication is used)
jp1ajs3webapp	22254/tcp	To connect the HTTP server with the web application server (J2EE server) within the Web Console server
jp1ajs3internalserver	22255/tcp	To internally manage the web application server (J2EE server)
jp1ajs3rmiserver	23152/tcp	To internally manage the web application server (J2EE server)

To Page Top