A.1 Tables of port numbers
- Organization of this subsection
-
(1) JP1/AJS3 - Manager port numbers
The following table lists the port numbers used for JP1/AJS3 - Manager.
Table A‒1: JP1/AJS3 - Manager port numbers
Service name
|
Port number
|
Purpose
|
jp1ajs2qman
|
20241/tcp
|
To receive job#1 registrations
To receive a job's#1 standard output file and standard error output file
To accept requests for execution of job execution commands#2 other than jp1exec and jp1exit
To link with JP1/OJE for VOS3 (to receive job registrations)
|
jp1ajs2qagt
|
20242/tcp
|
To send job#1 execution requests to JP1/AJS3 - Agent
To send requests to confirm the operating status of jobs#1 to JP1/AJS3 - Agent
To send requests to check the status of jobs#1 to JP1/AJS3 - Agent
|
jp1ajs2qnfy
|
20243/tcp
|
To receive job#1 start/end notifications from JP1/AJS3 - Agent
|
jp1ajs2monitor
|
20244/tcp
|
JP1/AJS3 - Manager remote jobnet
JP1/AJS3 - Manager remote command
JP1/AJS3 - View
JP1/AJS3 - Definition Assistant
|
jp1ajs2report
|
20245/tcp
|
To send job#1 status notifications
To link with JP1/OJE for VOS3 (to receive job status notifications)
|
jp1ajs2eamgr
|
20246/tcp
|
JP1/AJS3 - Manager event job execution
|
jp1ajs2eaagt
|
20247/tcp
|
JP1/AJS3 - Agent event job execution
|
jp1ajs3cdinetd
|
22250/tcp
|
JP1/AJS3 - Web Console
|
jp1ajs2atmsg#3
|
22251/tcp
|
Flexible job execution
|
22251/udp
|
Flexible job broadcast execution
|
jp1ajs2gw
|
23160/tcp
|
To communicate between scheduler services
|
jp1ajs2cm#4
|
22275/tcp
|
To use JP1/AJS3 Console Manager
To receive requests from JP1/AJS3 Console View
|
jp1ajs2ca#4
|
22276/tcp
|
To use JP1/AJS3 Console Manager
To connect with JP1/AJS3 Console Agent
To use JP1/AJS3 Console Agent
To receive requests from JP1/AJS3 Console Manager
|
jp1ajs2chkman#3
|
23138/tcp
|
To use the definition pre-check function
Used by the definition pre-check function#5
|
jp1ajs2chkagt#3
|
23139/tcp
|
To use the definition pre-check function
Used by the definition pre-check function
|
jp1ajs2qlagt#3
|
20300/tcp
|
To use queueless jobs
For queueless job execution by JP1/AJS3 - Agent
|
jp1ajs2qlftp#3
|
20301/tcp
|
To use queueless jobs
For queueless file transfer from JP1/AJS3 - Manager
|
jp1ajs3sysctlm#3
|
22256/tcp
|
To use the Web GUI (Management Portal)
For accepting communications from JP1/AJS3 - Web Console
|
jp1ajs3sysctla#3
|
22257/tcp
|
To use the Web GUI (Management Portal)
For accepting communications from the JP1/AJS3 System Control Manager service
|
None#6
|
22220/tcp
|
To communicate with an embedded database that has been configured during the new installation#7
|
- Note
-
When activating multiple scheduler services within a single logical host, separately assign ports to each jp1ajs2report service. Then specify the service name of the job status notification port set in the JP1/AJS3 - Manager environment settings.
- #1
-
Standard job, submit job, HTTP connection job, action job, or custom job.
- #2
-
See the table of job execution commands in 1.5 Commands in the manual JP1/Automatic Job Management System 3 Command Reference.
- #3
-
Not set at JP1/AJS3 - Manager installation. The port is set when you set up the functionality.
- #4
-
Set during installation in the Windows version only. In UNIX, this is set when JP1/AJS3 Console is set up. JP1/AJS3 Console
is functionality used for compatibility.
- #5
-
In UNIX, the definition pre-check function does not use the port number for jp1ajs2chkman. In Windows, the port number for jp1ajs2chkman is used for communication within the same server.
- #6
-
Not registered in services.
- #7
-
If you have configured the embedded database by executing the jajs_setup, jajs_setup_cluster, and jajs_migrate commands, use the port numbers described in 2.6.5 Database settings that are set up in JP1/AJS3. If you have performed an advanced setup to configure the embedded database, use the port number specified by the -p option of the ajsembdbbuild command.
To Page Top
(2) JP1/AJS3 - Agent port numbers
The following table lists the port numbers used for JP1/AJS3 - Agent.
Table A‒2: JP1/AJS3 - Agent port numbers
Service name
|
Port number
|
Purpose
|
jp1ajs2qman
|
20241/tcp
|
To send a job's#1 standard output file and standard error output file to JP1/AJS3 - Manager
To send requests to JP1/AJS3 - Manager for job execution commands#2 other than jp1exec and jp1exit
|
jp1ajs2qagt
|
20242/tcp
|
To accept job#1 execution requests
To accept requests to confirm the operating status of jobs#1
To accept requests to check the status of jobs#1
|
jp1ajs2qnfy
|
20243/tcp
|
To send job#1 start/end notifications to JP1/AJS3 - Manager
|
jp1ajs2eamgr
|
20246/tcp
|
JP1/AJS3 - Manager event job execution
|
jp1ajs2eaagt
|
20247/tcp
|
JP1/AJS3 - Agent event job execution
|
jp1ajs2atmsg#3
|
22251/tcp#4
|
Flexible job execution
|
22251/udp#4
|
Flexible job broadcast execution
|
jp1ajs2chkagt#3
|
23139/tcp
|
To use the definition pre-check function
Used by the definition pre-check function
|
jp1ajs2qlagt#3
|
20300/tcp#4
|
To use queueless jobs
For queueless job execution by JP1/AJS3 - Agent
|
jp1ajs2qlftp#3
|
20301/tcp#4
|
To use queueless jobs
For queueless file transfer from JP1/AJS3 - Manager
|
jp1ajs3sysctla#3
|
22257/tcp
|
To use the Web GUI (Management Portal)
For accepting communications from the JP1/AJS3 System Control Manager service
|
- Note
-
The following service names may be added to the services file (or the /etc/services file in UNIX), but can be deleted because they are not used in JP1/AJS3 - Agent:
-
Service name: jp1ajs2monitor, port number: 20244
-
Service name: jp1ajs2report, port number: 20245
-
Service name: jp1ajs2gw, port number: 23160
-
Service name: jp1ajs3cdinetd, port number: 22250
- #1
-
Standard job, submit job, HTTP connection job, action job, or custom job.
- #2
-
See the table of job execution commands in 1.5 Commands in the manual JP1/Automatic Job Management System 3 Command Reference.
- #3
-
Not set at JP1/AJS3 - Agent installation. The port is set when you set up the functionality.
- #4
-
JP1/AJS3 - Agent Minimal Edition does not use this port number because JP1/AJS3 - Agent Minimal Edition cannot execute flexible
and queueless jobs.
To Page Top
(3) JP1/AJS3 - View port number
The following table lists the port number used for JP1/AJS3 - View.
Table A‒3: JP1/AJS3 - View port number
Service name
|
Port number
|
Purpose
|
jp1ajs2monitor
|
20244/tcp
|
JP1/AJS3 - View
|
jp1ajs2cm#
|
22275/tcp
|
To use JP1/AJS3 Console View
To connect to JP1/AJS3 Console Manager
|
- Note
-
The following service names are added to the services file, but can be deleted because they are not used in JP1/AJS3 - View:
- #
-
JP1/AJS3 Console is functionality used for compatibility.
To Page Top
(4) JP1/AJS3 - Web Console port number
The following table lists the port number used for JP1/AJS3 - Web Console.
Table A‒4: JP1/AJS3 - Web Console port number
Service name
|
Port number
|
Purpose
|
jp1ajs3web
|
22252/tcp
|
To receive requests from a web browser (when SSL communication is not used)
|
jp1ajs3webssl
|
22253/tcp
|
To receive requests from a web browser (when SSL communication is used)
|
jp1ajs3webapp
|
22254/tcp
|
To connect the HTTP server with the web application server (J2EE server) within the Web Console server
|
jp1ajs3internalserver
|
22255/tcp
|
To internally manage the web application server (J2EE server)
|
jp1ajs3rmiserver
|
23152/tcp
|
To internally manage the web application server (J2EE server)
|
To Page Top