4.6.3 Considering the Management Portal execution environment
To use the Web GUI (Management Portal), you must set it up on both the manager host and agent host. For details about how to set up Web GUI (Management Portal), see the sections corresponding to the OS. For Windows, see 6.7 Settings related to the Web GUI (Management Portal) in the JP1/Automatic Job Management System 3 Configuration Guide. For Linux, see 15.8 Settings related to the Web GUI (Management Portal) in the JP1/Automatic Job Management System 3 Configuration Guide.
This section describes the management portal execution environment for using the Web GUI (Management Portal). You might need to change some settings.
- Organization of this subsection
(1) Environment settings for JP1/AJS3 - Manager
The following conditions must be met to use the Web GUI (Management Portal).
-
If the system time of the JP1/AJS3 Manager host is changed by using the NTP (Network Time Protocol) or some other means, make sure that:
-
The time is adjusted in milliseconds by using, for example, the slew mode, to prevent the same time from occurring twice.
-
Time adjustment operations are logged so that they can be confirmed later.
-
-
When you set the system time backward, make sure you delete the performance log file.
For details about how to delete performance log files, see 7.9.3 Changing the date and time of the system in the JP1/Automatic Job Management System 3 Administration Guide.
To obtain the status of JP1/AJS3 from the Web GUI (Management Portal), you might need to specify the settings described in the following sections:
-
6.6 Settings related to the output of performance reports in the JP1/Automatic Job Management System 3 Configuration Guide (for Windows), or 15.7 Settings related to the output of performance reports in the JP1/Automatic Job Management System 3 Configuration Guide (for UNIX)
-
21.5 Setting up the job distribution delay reduction function in the JP1/Automatic Job Management System 3 Configuration Guide
-
21.7 Settings for detecting factors that might stop job execution in the JP1/Automatic Job Management System 3 Configuration Guide
The Web GUI (Management Portal) can be used even if the preceding three additional settings are not specified. However, if these additional settings are not specified, some of the JP1/AJS3 operating information will not be displayed with the Web GUI (Management Portal). The following table lists the items that will not be displayed.
No. |
Relevant screen |
Operating information item |
Required setting |
---|---|---|---|
1 |
Scheduler Service Details screen |
Number of jobs that are in queue or running |
|
2 |
Number of execution generations |
||
3 |
Number of unreported information items |
||
4 |
Target Host screen |
Execution agent status |
Setting up the job distribution delay reduction function |
Also consider the values to be set for the environment setting parameters shown later. For details about the environment setting parameters, see 20.15 Management Portal execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.
No. |
Definition key |
Environment setting parameter |
Definition |
---|---|---|---|
1 |
[JP1_DEFAULT\JP1AJS2\CONTROL] |
"AUTHSYSLOG"= |
|
2 |
"SYSLOGCODE"= |
Sets the language of messages output to syslog. |
|
3 |
[JP1_DEFAULT\JP1AJS2\CONTROL\MANAGER] |
"CONRESTRICTSYSLOG"= |
|
4 |
"AJSSYSCTLDLOGSIZE"= |
Sets the size of the internal log file for the ajssysctlmd process. |
|
5 |
"LOGSIZE"= |
Sets the size of the log file for the ajssysctlmd process. |
|
6 |
"MAXOPEEXEC"= |
Sets the maximum number of on-screen operations. |
(2) Environment settings for JP1/AJS3 - Agent
Consider the values to be set for the environment setting parameters shown later. For details about the environment setting parameters, see 20.15 Management Portal execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.
No. |
Definition key |
Environment setting parameter |
Definition |
---|---|---|---|
1 |
[JP1_DEFAULT\JP1AJS2\CONTROL] |
"AUTHSYSLOG"= |
|
2 |
"SYSLOGCODE"= |
Sets the language of messages output to syslog. |
|
3 |
[JP1_DEFAULT\JP1AJS2\CONTROL\AGENT] |
"AJSSYSCTLDLOGSIZE"= |
Sets the size of the internal log file for the ajssysctlad process. |
4 |
"LOGSIZE"= |
Sets the size of the log file for the ajssysctlad process. |
|
5 |
"MAXOPEEXEC"= |
Sets the maximum number of on-screen operations. |