B.8 Revisions in 11-00
The following lists the revisions in 11-00 for each program.
- Organization of this subsection
(1) JP1/AJS3 - Manager
-
The supported language types were changed. The specific combinations of languages that are supported when using JP1/AJS3 in multi-language environments was also changed.
-
JP1/AJS3 - Web Console was added as a component of JP1/AJS3 - Manager. JP1/AJS3 - Web Console allows you to monitor units over the Internet from a web browser, and develop custom programs that use APIs to perform operations on units.
-
JP1/AJS3 - Print Option was incorporated into JP1/AJS3 - Manager. You can use JP1/AJS3 - Print Option to display and print unit information with a customized layout.
-
Messages between hosts such as agent hosts and JP1/AJS3 - View hosts can now be encrypted using SSL.
-
A flexible job was added as a job type. This job allows processing to be executed on an agent host that cannot be managed directly from the manager host. For example, you might use a flexible job with an execution agent in an auto-scaling environment. Although the definition of a flexible job is not OS-dependent, flexible jobs can only be executed in Windows and Linux environments.
-
An HTTP connection job was added as a job type. This job can send requests to HTTP interfaces such as web APIs provided by cloud environments and web servers. Although the definition of an HTTP connection job is not OS-dependent, HTTP connection jobs can only be executed in Windows and Linux environments.
-
The initial values of the following environment setting parameters were changed to reflect the recommended values:
-
UNITDEFDIVIDEUPDATE
-
AJSPRINTSORTUNITINF
-
ReceiveFileSizeStatus
-
LoadUserProfile
-
IsAccessTokenCache
-
MergeEnvMode
-
NotfyJobStateCount
-
PassingInfoUsePreRc
-
FileWriteMode
-
ResolveAgentInfo
-
RetryAgtStartNotification
-
-
The environment setting parameters that require assessment in the design stage of JP1/AJS3 were reviewed, and corresponding improvements were made to the manual.
-
An option was added that causes JP1/AJS3 - Manager to continue waiting when the status of a unit whose end is being waited for changes after re-execution of its succeeding unit. The behavior of JP1/AJS3 - Manager when waiting is enabled after a new installation of JP1/AJS3 was also changed.
-
The following OS is supported:
-
CentOS 6(x64)
-
CentOS 7
-
Linux 6.1(x64)
-
Linux 7.1
-
Oracle Linux 6(x64)
-
Oracle Linux 7
-
SUSE Linux 12
-
-
The following OS is no longer supported:
-
Windows Server 2008 (excluding Windows Server 2008 R2)
-
Windows Server 2003
-
Windows Server 2003(x64)
-
Linux 6.1(x86) or later
-
Linux 5.1(x86) or later
-
Linux 5.1(AMD/Intel 64) or later
-
-
Support for Outlook 2003 linkage was eliminated. JP1/AJS3 - Manager now supports linkage with Outlook 2013 (32 bit) and Outlook 2010 (32 bit).
-
JP1/AJS3 Console is now compatible with earlier versions.
-
Restrictions on file transmission can now be set.
(2) JP1/AJS3 - Agent
-
The supported language types were changed. The specific combinations of languages that are supported when using JP1/AJS3 in multi-language environments was also changed.
-
Messages exchanged with JP1/AJS3 - Manager can now be encrypted using SSL.
-
Flexible jobs can now be executed (Windows and Linux only).
-
HTTP connection jobs can now be executed (Windows and Linux only).
-
The initial values of the following environment setting parameters were changed to reflect the recommended values:
-
LoadUserProfile
-
IsAccessTokenCache
-
MergeEnvMode
-
NotfyJobStateCount
-
FileWriteMode
-
ResolveAgentInfo
-
RetryAgtStartNotification
-
-
The environment setting parameters that require assessment in the design stage of JP1/AJS3 were reviewed, and corresponding improvements were made to the manual.
-
The following OS is supported:
-
CentOS 6(x64)
-
CentOS 7
-
Linux 6.1(x64)
-
Linux 7.1
-
Oracle Linux 6(x64)
-
Oracle Linux 7
-
SUSE Linux 12
-
-
The following OS is no longer supported:
-
Windows Server 2008 (excluding Windows Server 2008 R2)
-
Windows Server 2003
-
Windows Server 2003(x64)
-
Linux 6.1(x86) or later
-
Linux 5.1(x86) or later
-
Linux 5.1(AMD/Intel 64) or later
-
-
Support for Outlook 2003 linkage was eliminated. JP1/AJS3 - Manager now supports linkage with Outlook 2013 (32 bit) and Outlook 2010 (32 bit).
-
Restrictions on file transmission can now be set.
(3) JP1/AJS3 - View
-
The supported language types were changed. The specific combinations of languages that are supported when using JP1/AJS3 in multi-language environments was also changed.
-
Messages exchanged with JP1/AJS3 - Manager can now be encrypted using SSL.
-
Flexible jobs can now be defined in the Define Details dialog box.
-
HTTP connection jobs can now be defined in the Define Details dialog box.
-
The paste commands in the menu of the Jobnet Editor window were replaced with two new commands. One is the Paste (Units and relations) command, which pastes icons, the coordinates of the icons, and the relation lines between icons. The other is the Paste (Units only) command which pastes icons and their coordinates.
-
An option was added that allows you to set the display order of items in the tree area and list area of the JP1/AJS3 - View window (Main window).
-
An option was added that allows you to change where the current day is positioned in the Time area and Schedule area of the Monthly Schedule window.
-
The settings below now apply as the default settings for all windows. You can customize these settings in JP1/AJS3 - View.
-
A question mark (?) is used as the icon for unregistered custom jobs.
-
Units in the tree area are displayed in the same order as the list area.
-
-
The settings below now apply as the default settings in JP1/AJS3 - View windows. You can customize these settings in JP1/AJS3 - View.
-
Job groups and planning groups are selected in the list area when the JP1/AJS3 - View window (Main window) is displayed
-
The same units remain selected and the scroll position is maintained when you refresh the window contents or specify list filtering
-
A confirmation message is displayed before deleting a defined schedule rule for a nested jobnet for which the Depends on upper-level jobnet check box is selected
-
Jobnets that have been registered for execution appear in the list area when Jobnet Definition is selected in Function Menu
-
-
The following settings now apply as the default settings in the Jobnet Editor window. You can customize these settings in JP1/AJS3 - View.
-
Nested jobnets and nested remote jobnets are selected in the map area when the Jobnet Editor window is displayed
-
Users are prevented from opening multiple Jobnet Editor windows
-
-
The following settings now apply as the default settings in the Jobnet Monitor window. You can customize these settings in JP1/AJS3 - View.
-
The contents of the Execution Result Details dialog box are not automatically refreshed
-
The Execution Result Details dialog box is displayed in large size
-
Users are prevented from opening multiple Jobnet Monitor windows
-
Jobs are displayed directly in the map area when displaying the Jobnet Monitor window from JP1/IM - View
-
-
Color images are now used to represent the execution status, execution results, and delays in Status and Result in the list area and Status in the detailed information area of the JP1/AJS3 - View window (Main window).
-
The following units are now hidden by default in the icon list in the Jobnet Editor window:
-
Remote jobnet
-
Receive MQ Message job
-
Receive MSMQ Message job
-
Send MQ Message job
-
Send MSMQ Message job
-
-
Support for Windows 10 has been added.
-
The following OS is no longer supported:
-
Windows Server 2008 (excluding Windows Server 2008 R2)
-
Windows Vista
-
Windows Server 2003
-
Windows Server 2003(x64)
-
Windows XP Professional
-